Comparison of ultrasonic and pressurized liquid extraction for the analysis of polycyclic aromatic compounds in soil samples by gas chromatography coupled to tandem mass spectrometry

A pressurized liquid extraction (PLE) method has been optimized for the determination of polycyclic aromatic hydrocarbons (PAHs) in soil samples and it was compared with ultrasonic extraction. The extraction step was followed by gas chromatography-triple quadrupole mass spectrometry (GC-QqQ-MS/MS) analysis. Parameters such as type of solvent, extraction time, extraction temperature and number of extractions were optimized. There were no significant differences among the two extraction methods although better extraction efficiencies were obtained when PLE was used, minimizing extraction time and solvent consumption. PLE procedure was validated, obtaining limits of detection (LODs) ranging from 0.02 to 0.75 μg kg⁻¹ and limits of quantification (LOQs) ranging from 0.07 to 2.50 μg kg⁻¹ for the selected PAHs. Recoveries were in the range of 59-110%, except for naphthalene, which was the most volatile PAH. Finally, the method was applied to real soil samples from Southeast of Spain. PAHs concentrations were low, and phenanthrene, pyrene, fluorene, benzo[a]pyrene and chrysene were the most frequently detected analytes in the samples.     

Use of ionic liquid aggregates of 1-hexadecyl-3-butyl imidazolium bromide in a focused-microwave assisted extraction method followed by high-performance liquid chromatography with ultraviolet and fluorescence detection to determine the 15+1 EU priority PAHs in toasted cereals ("gofios")

A focused-microwave assisted extraction method using aggregates of the ionic liquid (IL) 1-hexadecyl-3-butylimidazolium bromide (HDBIm-Br) followed by high-performance liquid chromatography (HPLC) with ultraviolet (UV) detection and single-channel fluorescence detection (FLD) has been developed for the determination of polycyclic aromatic hydrocarbons (PAHs) in toasted cereals (“gofios”) of different nature (wheat, barley, rye, and maize corn) from the Canary Islands, Spain. The optimized HPLC-UV-vis/single-channel FLD method takes 40 min for the chromatographic run with limits of detection varying between 0.02 and 4.01 ng mL⁻¹ for the fluorescent PAHs from the European Union (EU) priority list in foods, and 20.5 ng mL⁻¹ for the non-fluorescent PAH cyclopenta[c,d]pyrene (CPP). The optimized microwave step presented extractions recoveries ranging from 70.1 to 109% and precision values lower than 12.6% (as relative standard deviation), using an extraction time of 14 min. The extraction method also utilizes low amounts of sample (0.1 g), and low amounts of IL (77 mg), avoiding completely the use of organic solvents.     

The application of an in vitro gastrointestinal extraction to assess the oral bioaccessibility of polycyclic aromatic hydrocarbons in soils from a former industrial site

The total and bioaccessible concentration of 16 polycyclic aromatic hydrocarbons (PAHs) in soil from a former industrial site was investigated. Typical total concentrations across the sampling sites ranged from 1.5 mg kg⁻¹ for acenaphthylene up to 243 mg kg⁻¹ for fluoranthene. The oral bioaccessibility of PAHs in soil was assessed using an in vitro gastrointestinal extraction (Fed Organic Estimation human Simulation Test, FOREhST method). The oral bioaccessibility data indicated that fluorene, phenanthrene, chrysene, indeno(1,2,3-cd)pyrene and dibenzo(a,h)anthracene had the highest % bioaccessible fraction (based on their upper 75th percentile values being >60%) while the other PAHs had lower % bioaccessible fractions (means ranging between 35 and 59%). Significantly lower bioaccessibilities were determined for naphthalene. With respect to method validation and inter-laboratory comparison, the total and bioaccessible concentrations of benzo(a)anthracene, benzo(b)anthracene, benzo(k)fluoranthene, benzo(a)pyrene, indeno(1,2,3-cd)pyrene and dibenzo(a,h)anthracene was compared to published data derived using the same samples. The total PAH concentrations at the site were compared with generic assessment criteria (GAC) using the residential land use scenario (with plant uptake at 6% soil organic matter). Concentrations of 7 of the PAHs investigated within the soils could lead to an unacceptable risk to human health at this site.     

Improved efficiency of extraction of polycyclic aromatic hydrocarbons (PAHs) from the National Institute of Standards and Technology (NIST) Standard Reference Material Diesel Particulate Matter (SRM 2975) using accelerated solvent extraction

The efficiency of extraction of polycyclic aromatic hydrocarbons (PAHs) with molecular masses of 252, 276, 278, 300, and 302 Da from standard reference material diesel particulate matter (SRM 2975) has been investigated using accelerated solvent extraction (ASE) with dichloromethane, toluene, methanol, and mixtures of toluene and methanol. Extraction of SRM 2975 using toluene/methanol (9:1, v/v) at maximum instrumental settings (200 °C, 20.7 MPa, and five extraction cycles) with 30-min extraction times resulted in the following elevations of the measured concentration when compared with the certified and reference concentrations reported by the National Institute of Standards and Technology (NIST): benzo[b]fluoranthene, 46%; benzo[k]fluoranthene, 137%; benzo[e]pyrene, 103%; benzo[a]pyrene, 1,570%; perylene, 37%; indeno[1,2,3-cd]pyrene, 41%; benzo[ghi]perylene, 163%; and coronene, 361%. The concentrations of the following PAHs were comparable to the reference values assigned by NIST: indeno[1,2,3-cd]fluoranthene, dibenz[a,h]anthracene, and picene. The measured concentration of dibenzo[a,e]-pyrene was lower than the information value reported by the NIST. The measured concentrations of other highly carcinogenic PAHs (dibenzo[a,l]pyrene, dibenzo[a,i]pyrene, and dibenzo[a,h]pyrene) in SRM 2975 are also reported. Comparison of measurements using the optimized ASE method and using similar conditions to those applied by the NIST for the assignment of PAH concentrations in SRM 2975 indicated that the higher values obtained in the present study were associated with more complete extraction of PAHs from the diesel particulate material. Re-extraction of the particulate samples demonstrated that the deuterated internal standards were more readily recovered than the native PAHs, which may explain the lower values reported by the NIST. The analytical results obtained in the study demonstrated that the efficient extraction of PAHs from SRM 2975 is a critical requirement for the accurate determination of PAHs with high molecular masses in this standard reference material and that the optimization of extraction conditions is essential to avoid underestimation of the PAH concentrations. The requirement is especially relevant to the human carcinogen benzo[a]pyrene, which is commonly used as an indicator of the carcinogenic risk presented by PAH mixtures.     

Determination of polycyclic aromatic hydrocarbons in food samples by automated on-line in-tube solid-phase microextraction coupled with high-performance liquid chromatography-fluorescence detection

A simple and sensitive automated method, consisting of in-tube solid-phase microextraction (SPME) coupled with high-performance liquid chromatography-fluorescence detection (HPLC-FLD), was developed for the determination of 15 polycyclic aromatic hydrocarbons (PAHs) in food samples. PAHs were separated within 15 min by HPLC using a Zorbax Eclipse PAH column with a water/acetonitrile gradient elution program as the mobile phase. The optimum in-tube SPME conditions were 20 draw/eject cycles of 40 μL of sample using a CP-Sil 19CB capillary column as an extraction device. Low- and high-molecular weight PAHs were extracted effectively onto the capillary coating from 5% and 30% methanol solutions, respectively. The extracted PAHs were readily desorbed from the capillary by passage of the mobile phase, and no carryover was observed. Using the in-tube SPME HPLC-FLD method, good linearity of the calibration curve (r > 0.9972) was obtained in the concentration range of 0.05–2.0 ng/mL, and the detection limits (S/N = 3) of PAHs were 0.32–4.63 pg/mL. The in-tube SPME method showed 18–47 fold higher sensitivity than the direct injection method. The intra-day and inter-day precision (relative standard deviations) for a 1 ng/mL PAH mixture were below 5.1% and 7.6% (n = 5), respectively. This method was applied successfully to the analysis of tea products and dried food samples without interference peaks, and the recoveries of PAHs spiked into the tea samples were >70%. Low-molecular weight PAHs such as naphthalene and pyrene were detected in many foods, and carcinogenic benzo[a]pyrene, at relatively high concentrations, was also detected in some black tea samples. This method was also utilized to assess the release of PAHs from tea leaves into the liquor.     

Microwave-assisted headspace solid-phase microextraction to quantify polycyclic aromatic hydrocarbons in pine trees

A methodology for the extraction and quantification of 16 polycyclic aromatic hydrocarbons (PAHs) based on microwave-assisted extraction coupled with headspace solid-phase microextraction followed by gas chromatography/mass spectroscopy was validated for needles and bark of two pine species (Pinus pinaster Ait. and Pinus pinea L.). The limits of detection were below 0.92 ng g(-1) (dry weight) for needles and below 0.43 ng g(-1) (dw) for bark. Recovery assays were performed with two sample masses spiked at three levels and the overall mean values were between 70 and 110 % for P. pinaster and 75 and 129 % for P. pinea. In the first species, the increase in sample mass lowered the recoveries slightly for most PAHs, whereas for the second, the recoveries were higher for the needles. Naturally contaminated samples from 4 sites were analysed, with higher levels for urban sites (1,320 and 942 ng g(-1) (dw) vs. 272 and 111 ng g(-1) (dw) for needles and 696 and 488 ng g(-1) (dw) vs. 270 and 103 ng g(-1) (dw) for bark) than for rural ones and also for P. pinaster samples over P. pinea. It is also shown that gas-phase PAHs are predominant in the needles (over 65 % of the total PAHs) and that the incidence for particulate material in bark, reaching 40 % as opposed to a maximum below 20 % for the needles. The method has proved to be fit and improved some of the existing approaches, on the assessment of particulate PAHs and bark levels.     

Micellar microwave-assisted extraction combined with solid-phase microextraction for the determination of polycyclic aromatic hydrocarbons in a certified marine sediment

A method for the determination of polycyclic aromatic hydrocarbons (PAHs) in marine sediments using microwave-assisted extraction with a micellar medium combined with solid-phase microextraction (SPME) and gas chromatography-mass spectrometry (GC-MS) has been developed. Two kinds of SPME fibers (100 μm polydimethylsiloxane and 85 μm polyacrylate) and different micellar media were compared for the extraction efficiency of the 16 EPA priority PAHs. The polyacrylate fiber with a micellar medium of polyoxyethylene-10-laurylether provides the highest extraction efficiency. The method is remarkable for presenting lower equilibrium times and considerably higher reproducibilities than the obtained in aqueous medium. The LODs obtained ranged between 0.28 ng/ml for fluorene and 7.66 ng/ml for indeno[1,2,3-cd]pyrene. The method has been applied to the determination of PAHs in a certified marine sediment (SRM 1941a), obtaining recoveries between 58.6 and 111.5% for three- to five-ring PAHs with precision close to or lower than the certified values.     

Determination of polycyclic aromatic hydrocarbons in the needles of a Scotch pine (<Emphasis Type="Italic">Pinus sylvestris</Emphasis> L.), a biomonitor of atmospheric pollution

A procedure was developed for the determination of polycyclic aromatic hydrocarbons (PAH) in the needles of a Scotch pine (Pinus sylvestris L.), which is characterized by the simple and efficient sample preparation. The procedure involves the steps of the extraction of PAH with n-hexane on ultrasonic irradiation, the precipitation of concomitant cereous components from the extract on its cooling, the purification of the PAH fraction on a cartridge with silica gel (0.5 g), and the redissolution of the concentrated eluate in methanol. The quantitative determination of PAH (15 compounds including 13 priority) with the use of chromatography-mass spectrometry in the selective ion detection mode exhibits the interlaboratory precision of the results of the PAH determination V _Rl = 0.059–0.088 for the concentration of PAH in needles from 0.3 to 600 ng/g and a detection limit of 0.06 ng/g (signal-to-noise ratio = 3; mass of the sample for extraction was 10 g). The accumulation levels of PAH in the Scotch pine needles were presented; the needles were first studied as a biomonitor of atmospheric pollution over the southern part of the Baikal natural territory.     

Comparison of PAH Levels and Sources in Pine Needles from Portugal,Spain, and Greece

The main objective of this work was to assess and compare the levels, patterns, and sources of contamination of 16 polycyclic aromatic hydrocarbons (PAHs) between Portugal, Spain, and Greece (in the island of Crete). A total of 9 sampling sites were chosen (4 in urban and 5 in non-urban areas) in each country and pine needles from the Pinus pinea L. species were collected. Although the mean total PAH levels was similar in the three countries (279 ± 236 ng g^?1 for Portugal, 294 ± 258 ng g^?1 for Spain, 301 ± 253 ng g^?1 for Greece, all dry weight) and, in general, 3-ring and 4-ring PAHs were predominant (being phenanthrene consistently the most abundant), there were some visible differences in the aromatic ring patterns and possible sources between the three regions. Source apportionment was done using PAH ratios (Phen/Ant and Flt/Pyr crossplots) and reflected mixed petrogenic and pyrogenic sources. Furthermore, Principal Component Analysis (PCA) clearly separated the urban and the non-urban sites and all three countries, which reinforces that the sources of contaminations vary in each case and the suitability of pine needles for trans-boundary biomonitoring of PAHs.     

Ash properties of Pinus halepensis needles treated with diammonium phosphate

The ash properties of Pinus halepensis (Aleppo pine) needles before and after treatment with diammonium phosphate (NH₄)₂HPO₄ (DAP) have been investigated, using thermogravimetric analysis (TG), differential thermal analysis (DTA), titrimetry, inductively coupled plasma-emission spectrometry (ICP-ES), X-ray diffraction (XRD) and scanning electron microscopy (SEM). DAP is extensively used as active component in wildland fire retardants.The following crystalline compounds have been identified in ashes prepared at 600 °C before treatment with DAP: KCl, Ca(OH)₂, MgO, (CaMg)CO₃, K₂CO₃·CaCO₃, K₂CO₃, K₂SO₄, CaO and CaCO₃, whereas CaO, MgO, K₂SO₄, K₂CO₃, CaCO₃, KCl and CaO, MgO, K₂SO₄ and K₂CO₃ at 800 and 1000 °C, respectively. The presence of DAP alters the composition of ashes converting, almost completely at high temperatures, the metallic oxides into phosphate salts. Thus, decreasing their alkalinity. The micrographs obtained by SEM indicate that pine needles ashes contain large porous particles of carbon compounds and several inorganic particles of irregular shape <1.0 mm, whereas after treating the needles with DAP an amorphous rigid structure was formed.To facilitate our investigation model mixtures of CaCO₃ + DAP, MgCO₃ + DAP, K₂CO₃ + DAP were heat treated under the same conditions used for preparing the ashes. The chemical transformations taken place during heating were studied by analysing the reaction products using thermal analysis and XRD.The physical, mineralogical and chemical forest ash properties determined could be used to evaluate the environmental risk of the use of fire retardants on soils, plants and aquatic systems as well as to investigate the mechanism of combustion of forest fuels in the presence of DAP.     

Alkaline extraction in combination with microwave-assisted extraction followed by solid-phase extraction treatment for polycyclic aromatic hydrocarbons in a sediment sample

Microwave-assisted extraction using 1 M KOH/methanol (alkaline-MAE) in combination with solid-phase extraction treatment was developed and applied to polycyclic aromatic hydrocarbons (PAHs) in a sediment sample. Although various conditions were examined (100 or 150 °C for 10 or 30 min), comparable concentrations of PAHs to those obtained by conventional extraction with 1 M KOH/methanol at 70 °C for 4 h were obtained, even at 100 °C for 10 min. The concentrations obtained by using MeOH at 150 °C for 30 min without KOH were lower (by 1.3-37%) than those obtained by alkaline-MAE at 150 °C for 30 min. Since the developed technique can introduce higher concentration of benzo[ghi]perylene relative to those using pressurized liquid extraction (toluene, 150 °C, 15 MPa, 10 min, two cycles), the developed alkaline-MAE is a effective technique.     

Chemometrics-assisted excitation–emission fluorescence spectroscopy on nylon-attached rotating disks. Simultaneous determination of polycyclic aromatic hydrocarbons in the presence of interferences

This work presents a green and very simple approach which enables the accurate and simultaneous determination of benzo[a]pyrene, dibenz[a,h]anthracene, benz[a]anthracene, and chrysene, concerned and potentially carcinogenic heavy-polycyclic aromatic hydrocarbons (PAHs) in interfering samples. The compounds are extracted from water samples onto a device composed of a small rotating Teflon disk, with a nylon membrane attached to one of its surfaces. After extraction, the nylon membrane containing the concentrated analytes is separated from the Teflon disk, and fluorescence excitation–emission matrices are directly measured on the nylon surface, and processed by applying parallel factor analysis (PARAFAC), without the necessity of a desorption step. Under optimum conditions and for a sample volume of 25 mL, the PAHs extraction was carried out in 20 min. Detection limits based on the IUPAC recommended criterion and relative errors of prediction were in the ranges 20–100 ng L⁻¹ and 5–7%, respectively. Thanks to the combination of the ability of nylon to strongly retain PAHs, the easy rotating disk extraction approach, and the selectivity of second-order calibration, which greatly simplifies sample treatment avoiding the use of toxic solvents, the developed method follows most green analytical chemistry principles.     

Sample preparation of sewage sludge and soil samples for the determination of polycyclic aromatic hydrocarbons based on one-pot microwave-assisted saponification and extraction

A microwave-assisted sample preparation (MASP) procedure was developed for the analysis of polycyclic aromatic hydrocarbons (PAHs) in sewage sludge and soil samples. The procedure involved the simultaneous microwave-assisted extraction of PAHs with n-hexane and the hydrolysis of samples with methanolic potassium hydroxide. Because of the complex nature of the samples, the extracts were submitted to further cleaning with silica and Florisil solid-phase extraction cartridges connected in series. Naphthalene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benz[a]anthracene, chrysene, benzo[e]pyrene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[a,h]anthracene, benzo[g,h,i]perylene, and indeno[1,2,3-cd]pyrene, were considered in the study. Quantification limits obtained for all of these compounds (between 0.4 and 14.8 μg kg⁻¹ dry mass) were well below of the limits recommended in the USA and EU. Overall recovery values ranged from 60 to 100%, with most losses being due to evaporation in the solvent exchange stages of the procedure, although excellent extraction recoveries were obtained. Validation of the accuracy was carried out with BCR-088 (sewage sludge) and BCR-524 (contaminated industrial soil) reference materials.     

Barium alginate caged Fe3O4@C18 magnetic nanoparticles for the pre-concentration of polycyclic aromatic hydrocarbons and phthalate esters from environmental water samples

The hydrophobic octadecyl (C₁₈) functionalized Fe₃O₄ magnetic nanoparticles (Fe₃O₄@C₁₈) were caged into hydrophilic barium alginate (Ba²⁺-ALG) polymers to obtain a novel type of solid-phase extraction (SPE) sorbents, and the sorbents were applied to the pre-concentration of polycyclic aromatic hydrocarbons (PAHs) and phthalate esters (PAEs) pollutants from environmental water samples. The hydrophilicity of the Ba²⁺-ALG cage enhances the dispersibility of sorbents in water samples, and the superparamagnetism of the Fe₃O₄ core facilitates magnetic separation. With the magnetic SPE technique based on the Fe₃O₄@C₁₈@Ba²⁺-ALG sorbents, it requires only 30 min to extract trace levels of analytes from 500 mL water samples. After the eluate is condensed to 0.5 mL, concentration factors for both phenanthrene and di-n-propyl-phthalate are over 500, while for other analytes are about 1000. The recoveries of target compounds are independent of salinity and solution pH under testing conditions. Under optimized conditions, the detection limits for phenanthrene, pyrene, benzo[a]anthracene, and benzo[a]pyrene are 5, 5, 3, and 2 ng L⁻¹, and for di-n-propyl-phthalate, di-n-butyl-phthalate, di-cyclohexyl-phthalate, and di-n-octyl-phthalate are 36, 59, 19, and 36 ng L⁻¹, respectively. The spiked recoveries of several real water samples for PAHs and PAEs are in the range of 72-108% with relative standard deviations varying from 1% to 9%, showing good accuracy of the method. The advantages of the new SPE method include high extraction efficiency, short analysis time and convenient extraction procedure. To the best of our knowledge, it is unprecedented that hydrophilic Ba²⁺-ALG polymer caged Fe₃O₄@C₁₈ magnetic nanomaterial is used to extract organic pollutants from large volumes of water samples.     

Uranyl(VI) complexes of [O,N,O,N′]-type diaminobis(phenolate) ligands: Syntheses,structures and extraction studies

The syntheses and crystal structures of four new uranyl complexes with [O,N,O,N′]-type ligands are described. The reaction between uranyl nitrate hexahydrate and the phenolic ligand [(N,N-bis(2-hydroxy-3,5-dimethylbenzyl)-N′,N′-dimethylethylenediamine)], H₂L1 in a 1:2 molar ratio (M to L), yields a uranyl complex with the formula [UO₂(HL1)(NO₃)] · CH₃CN (1). In the presence of a base (triethylamine, one mole per ligand mole) with the same molar ratio, the uranyl complex [UO₂(HL1)₂] (2) is formed. The reaction between uranyl nitrate hexahydrate and the ligand [(N,N-bis(2-hydroxy-3,5-di-t-butylbenzyl)-N′,N′-dimethylethylenediamine)], H₂L2, yields a uranyl complex with the formula [UO₂(HL2)(NO₃)] · 2CH₃CN (3) and the ligand [N-(2-pyridylmethyl)-N,N-bis(2-hydroxy-3,5-dimethylbenzyl)amine], H₂L3, in the presence of a base yields a uranyl complex with the formula [UO₂(HL3)₂] · 2CH₃CN (4). The molecular structures of 1–4 were verified by X-ray crystallography. The complexes 1–4 are zwitter ions with a neutral net charge. Compounds 1 and 3 are rare neutral mononuclear [UO₂(HLn)(NO₃)] complexes with the nitrate bonded in η²-fashion to the uranyl ion. Furthermore, the ability of the ligands H₂L1–H₂L4 to extract the uranyl ion from water to dichloromethane, and the selectivity of extraction with ligands H₂L1, H₃L5 (N,N-bis(2-hydroxy-3,5-dimethylbenzyl)-3-amino-1-propanol), H₂L6 · HCl (N,N-bis(2-hydroxy-5-tert-butyl-3-methylbenzyl)-1-aminobutane · HCl) and H₃L7 · HCl (N,N-bis(2-hydroxy-5-tert-butyl-3-methylbenzyl)-6-amino-1-hexanol · HCl) under varied chemical conditions were studied. As a result, the most efficient and selective ligand for uranyl ion extraction proved to be H₃L7 · HCl.     

Use of coacervates for the on-site extraction/preservation of polycyclic aromatic hydrocarbons and benzalkonium surfactants

The suitability of coacervates for the preservation of organic pollutants after their extraction from water samples was investigated for the first time. Acid-induced sodium dodecanesulfonic acid (SDSA) micelle-based coacervates were selected for this purpose. Their capacity to preserve benzalkonium homologue (C₁₂, C₁₄ and C₁₆) surfactants (BASs) and different polycyclic aromatic hydrocarbons (PAHs) [benzo(a)pyrene (BaP), benzo(b)fluoranthene (BbF), benzo(k)fluoranthene (BkF), benzo(ghi)perylene (BghiP), benzo(a)anthracene (BaA) and indene(1,2,3-c-d)pyrene (IP)] was investigated. BASs and PAHs were efficiently extracted by the coacervate by formation of mixed aggregates and hydrophobic interactions, respectively. Their stability into the coacervate was investigated under three temperature conditions (room temperature, 4 °C and −20 °C) and two hydrochloric acid concentrations (3.75 M and 4.2 M), which was used to induce coacervation. No losses were observed during at least 3 months at the different experimental conditions tested. The increase of the temperature up to 35 °C for a month did not affect the stability of the target compounds. No influence of the water matrix (distilled, river or wastewater) on the stabilization of BASs and PAHs was observed. The high-stabilizing capacity of the coacervate for the target compounds and its low volume make easy the transport and storage of analytes.     

Analysis of EU priority polycyclic aromatic hydrocarbons in food supplements using high performance liquid chromatography coupled to an ultraviolet, diode array or fluorescence detector

High performance liquid chromatography coupled to an ultraviolet, diode array or fluorescence detector (HPLC/UV-FLD) has been used to set up a method to detect the 15(+1) EU priority polycyclic aromatic hydrocarbons (PAHs) in food supplements covering the categories of dried plants and plant extracts excluding oily products. A mini validation was performed and the following parameters have been determined: limit of detection, limit of quantification, precision, recovery and linearity. They were in close agreement with quality criteria described in the Commission Regulation (EC) No 333/2007 concerning the PAH benzo[a]pyrene in foodstuffs, except the not fluorescent cyclopenta[c,d]pyrene for which the UV detection leads to a higher limit of detection. Analysis of twenty commercial food supplements covering mainly the class of dried plants was performed to evaluate their PAHs contamination levels and to test the applicability of the method to various plant matrices. Fifty percent of analyzed samples showed concentration exceeding 2 μg kg⁻¹ for one or more PAHs.     

Hollow-fibre liquid-phase microextraction: a simple and fast cleanup step used for PAHs determination in pine needles

A new, fast and simple cleanup procedure, based on hollow-fibre liquid-phase microextraction (HF-LPME) is described here, used for the determination of 13 polycyclic aromatic hydrocarbons (PAHs) in complex pine needle samples. Initially, pine needle samples were sonicated in a 20 mL aqueous solution having a 20% (v:v) acetone content and 5 mL of the sonicated liquid extract was then used for the HF-LPME cleanup step. Different experimental parameters (namely: type of organic solvent used as acceptor phase, effect and type of co-solvent, salt addition, sample agitation and sampling time) were controlled and optimized based on the response of GC-MS instrument under the SIM mode. Under the optimized experimental conditions found the typical chromatograms obtained revealed that despite the very complex matrix of pine needles the HF-LPME cleanup step greatly reduced if not eliminated the presence of interferents, resulting in chromatograms which contained very cleanly separated and readily evaluable PAH peaks. In addition, the proposed method was found to be linear in the concentration 10-2000 ng g⁻¹ for most target analytes and the limits of detection for a S/N = 3 ranged between 0.01 and 0.95 ng g⁻¹ (dry weight). Furthermore, the repeatability and reproducibility were also found good. Finally, the proposed method was applied for the analysis of real pine needle samples taken for different parts of the island of Crete.     

Optimization and validation of a low temperature microwave-assisted extraction method for analysis of polycyclic aromatic hydrocarbons in airborne particulate matter

A low temperature microwave-assisted extraction method (MAE) is reported for the analysis of polycyclic aromatic hydrocarbons (PAHs) in airborne particulate matter (PM). The main parameters affecting the extraction efficiency (choice of extractants, microwave power, and extraction time) were investigated and optimized. The optimized procedure requires a 20 ml mixture of acetone:n-hexane (1:1) for extraction of PAHs in PM at 150 W of microwave energy (20 min extraction time). Clean-up of MAE extracts was not found to be necessary. The optimized method was validated using two different SRM (1648-urban particulate matter and 1649a, urban dust). The results obtained are in good agreement with certified values. PAHs recoveries for both reference materials were between 79 and 122% with relative standard deviation ranging from 3 to 21%. Detection limits were determined based on blank determination using two kinds of quartz filter substrates (n = 10), which ranged from 0.001 (0.03) ng m⁻³ (pg/μg) for B(k)Ft to 1.119 (37.3) for Naph in ng m⁻³ (pg/μg), respectively. The repeatability and day-to-day reproducibility obtained in this study were in the range of 4-16 and 3-25% for spiked standards and SRM 1649, respectively. The optimized and validated MAE technique was applied to the extraction of PAHs from a set of real world PM samples collected in Singapore. The sum of particulate-bound PAHs in outdoor PM ranged from 1.05 to 3.45 ng m⁻³ while that in indoor PM (cooking emissions) ranged from 27.6 to 75.7 ng m⁻³, respectively.     

Application of sulfur microparticles for solid-phase extraction of polycyclic aromatic hydrocarbons from sea water and wastewater samples

The application of sulfur microparticles as efficient adsorbents for the solid-phase extraction (SPE) and determination of trace amounts of 10 polycyclic aromatic hydrocarbons (PAHs) was investigated in sea water and wastewater samples using high performance liquid chromatography coupled with an ultraviolet detector (HPLC–UV). Parameters influencing the preconcentration of PAHs such as the amount of sulfur, solution flow rate and volume, elution solvent, type and concentration of organic modifier, and salt effect were examined. The results showed that at a flow rate of 10 mL min⁻¹ for the sample solutions (100 mL), the PAHs could be adsorbed on the sulfur microparticles and then eluted by 2.0 mL of acetonitrile. For HPLC–UV analysis of extracted PAHs, the calibration curves were linear in the range of 0.05–80.0 μg L⁻¹; the coefficients of determinations (r²) were between 0.9934 and 0.9995. The relative standard deviations (RSDs) for eight replicates at two concentration levels (0.5 and 4.0 μg L⁻¹) of PAHs were lower than 7.3%, under optimized conditions. The limits of detection (LODs, <!-- no-mfc -->S/N<!-- /no-mfc --> = 3) of the proposed method for the studied PAHs were 0.007–0.048 μg L⁻¹. The recoveries of spiked PAHs (0.5 and 4 μg L⁻¹) in the wastewater and sea water samples ranged from 78% to 108%. The simplicity of experimental procedure, high extraction efficiency, short sample analysis, and using of low cost sorbent demonstrate the potential of this approach for routine trace PAH analysis in water and wastewater samples.