Study of Spectrophotometric Characteristics of the Charge Transfer Reaction of Aminomethylbenzoic Acid with 7,7,8,8‐Tetracyanoquinodimethane

A new spectrophotometric method was developed for the determination of aminomethylbenzoic acid (PAMBA) using 7,7,8,8‐tetracyanoquinodimethane (TCNQ). The method was based on the formation of charge transfer (CT) complex of this drug as n‐electron donor with the π‐acceptor TCNQ. TCNQ was found to react with PAMBA to produce a kind of yellow complex. The CT reaction proceeded quantitatively in pH 8.5 buffer solution. Different variables affecting the reaction were carefully studied and optimized. Under optimal reaction conditions, the stoichiometric ratio of the reaction, maximum absorption wavelength and the value of molar absorptivity were measured to be 1:1, 425 nm, and 1.9×10⁴ L·mol^?1·cm^?1, respectively. Beer′s law was obeyed in the range of 1–9 µg·mL^?1 of PAMBA. The data have been filled to a linear regression equation A=?0.2612+0.1123c (µg·mL^?1), with a correlation coefficient of 0.9996. The detection limit was 0.4 µg·mL^?1, R.S.D. was less than 1.9%, and average recovery was over 97.6%. The formation of the CT complex was also confirmed by both infrared and ¹H NMR measurements. The thermodynamic property, kinetic property and reaction mechanism have also been discussed. The method developed was applied successfully to the determination of the subject drug in its pharmaceutical dosage forms with good precision and accuracy compared to official method revealed by t‐ and F‐tests.     

Flow Injection Spectrophotometric Determination of the Antibacterial Levofloxacin in Tablets and Human Urine

Abstract

A sensitive and fast flow‐injection (FI) spectrophotometric method for the determination of levofloxacin based on the formation of a colored product upon oxidation with N‐bromosuccinimide (NBS) in acidic medium is proposed. Optimization of chemical and FI variables has been made. Under the optimized conditions, the sampling rate was over 90 h^?1, the calibration curve obtained was linear over the range 10–300 µg·mL^?1, and the detection limit was 3 µg·mL^?1. The proposed method was successfully applied to the determination of levofloxacin in pharmaceuticals and human urine samples. It was also found that the excipients in the commercial tablet preparation did not interfere with the assay. Results are precise (RSD<2.7%; n =10) and in agreement with those found by the reference high pressure liquid chromatography (HPLC) procedure.     

Nonextractive Trace Level Simultaneous Determination of Mercury(II) and Zinc(II) in Environmental Samples with 2‐(5‐Bromo‐2‐pyridylazo)‐5‐diethylaminophenol and Cetylpyridinium Chloride

Abstract

A simple, rapid, selective, and sensitive method for the derivative spectrophotometric determination of Hg(II) and its simultaneous determination in the presence of Zn(II) using 2‐(5‐bromo‐2‐pyridylazo)‐5‐diethylaminophenol in the presence of cetylpyridinium chloride, a cationic surfactant, has been developed. The molar absorption coefficient and analytical sensitivity of the 1∶1 Hg(II) complex at 558 nm (λ_max) are 5.78×10⁴ L mol^?1 cm^?1 and 0.67 ng mL^?1, respectively. The detection limit of Hg(II) is 1.40×10^?2 ng mL^?1, and Beer's law is valid in the concentration range 0.05–2.40 µg mL^?1. Overlapping spectral profiles of Hg(II) and Zn(II) complexes in zero‐order mode interfere in their simultaneous determination. However, 0.10–2.00 µg mL^?1 of Hg(II) and 0.065–0.650 µg mL^?1 of Zn(II), when present together, can be simultaneously determined at zero cross point of the derivative spectrum, without any prior separation. The relative standard deviation for six replicate measurements of solutions containing 0.134 µg mL^?1 of Hg(II) and 0.620 µg mL^?1 of Zn(II) is 1.72 and 1.47%, respectively. The proposed method has successfully been evaluated for trace level simultaneous determination of Hg(II) and Zn(II) in environmental samples.     

Study of Spectrophotometric Determination of Amoxicillin Using Sodium 1,2‐Naphthoquinone‐4‐Sulfonate as the Chemical Derivative Chromogenic Reagent

Abstract

A simple and sensitive spectrophotometric method is described for determination of amoxicillin. The method is based on a nucleophilic substitution reaction to measure the pink compound produced by the reaction of amoxicillin with sodium 1,2‐naphthoquinone‐4‐sulfonate in pH 9.00 buffer solution. The stoichiometric ratio of the compound is 1:1, and its maximum absorption wavelength is at 468 nm, ε=3.91×10³ L · mol^?1 · cm^?1. The Beer's law is obeyed in the range of 0.8–120 µg · mL^?1 of amoxicillin. The linear regression equation is A=0.041239+0.22128 C, with 0.9994 of a linear regression correlation coefficient. The detection limit is 2.0 µg · mL^?1, and average recovery is over 98.5%. This paper further optimizes the determination of amoxcillin compared to the previous methods, and the kinetic property and reaction mechanism are studied intensively. This proposed method has been successfully applied to the determination of amoxicillin in tablets and capsules. The results obtained by this method agreed well with those by the official method high pressure liquid chromatography (HPLC).     

Genetic Algorithm Applied to Selection of Wavelength in Partial Least Squares for Simultaneous Spectrophotometric Determination of Nitrophenol Isomers

Abstract

Ternary mixtures of nitrophenol isomers have been simultaneously determined in synthetic and real matrix by application of genetic algorithm and partial least squares model. All factors affecting the sensitivity were optimized and the linear dynamic range for determination of nitrophenol isomers found. The simultaneous determination of nitrophenol mixtures by using spectrophotometric methods is a difficult problem, due to spectral interferences. The partial least squares modeling was used for the multivariate calibration of the spectrophotometric data. A genetic algorithm is a suitable method for selecting wavelength for PLS calibration of mixtures with almost identical spectra without loss prediction capacity. The experimental calibration matrix was designed by measuring the absorbance over the range 300–520 nm for 21 samples of 1–20 µg mL^?1, 1–20 µg mL^?1, and 1–10 µg mL^?1 of m‐nitrophenol, o‐nitrophenol, and p‐nitrophenol, respectively. The root mean square error of prediction for m‐nitrophenol, o‐nitrophenol, and p‐nitrophenol with genetic algorithms and without genetic algorithms were 0.3732, 0.5997, 0.3181 and 0.7309, 0.9961, 1.0055, respectively. The proposed method was successfully applied for the determination of m‐nitrophenol, o‐nitrophenol, and p‐nitrophenol in synthetic and water samples.     

Spectrofluorimetric and Spectrophotometric Stability‐Indicating Methods for the Analysis of Veralipride in Presence of Its Degradants and in Spiked Human Plasma

Spectrofluorimetric and spectrophotometric stability‐indicating methods were developed and validated for analysis of veralipride (Ver) in presence of its hydrolytic and oxidative degradants. The spectrofluorimetric method was based on direct measurement of the intrinsic fluorescence of Ver at 366 nm after excitation at 299 nm using sodium lauryl sulfate (SLS) as micelle enhancer. The fluorescence intensity plot was linear over the concentration range 1.0–10.0 µg·mL^?1. The high sensitivity of the method allowed its successful application to the analysis of Ver in spiked human plasma. Two other methods were developed. They are based on the oxidative coupling reaction of Ver with 3‐methyl benzothiazolin‐2‐one hydrazone (MBTH) hydrochloride in presence of ceric ammonium sulphate in an acidic medium. The first method depends on spectrophotometric measurement of the stable green colored oxidative coupling product at 660 nm. The different experimental parameters affecting the reaction were optimized. Linearity range is 10.0–100.0 µg·mL^?1. The second method depends on a fluorescence quenching effect of Ver on the fluorescence of Ce³⁺. The difference in fluorescence intensity was measured at 380 nm after excitation at 300 nm. This method is applicable over the concentration ranges 0.25–2.50 µg·mL^?1. The methods were validated according to the ICH guidelines. They were successfully applied for the analysis of Ver in drug substance, drug product and in laboratory prepared mixtures containing different percentages of hydrolytic and oxidative degradants.     

Improved Multianalyte Determination of the Intense Sweeteners Aspartame and Acesulfame‐K with a Solid Sensing Zone Implemented in an FIA Scheme

Abstract

A multianalyte flow‐through sensor is proposed for the simultaneous determination of aspartame (AS) and acesulfame‐K (AK) in tabletop sweeteners. The procedure is based on the transient retention of AK in the ion exchanger Sephadex DEAE A‐25 placed in the flow‐through cell of a monochannel flow injection analysis (FIA) set‐up using pH 2.70 ortophosphoric acid/sodium dihydrogen phosphate buffer 0.06 M as carrier. In these conditions AS is very weakly retained, which makes it possible to measure the intrinsic ultraviolet (UV) absorbance of first AS and then AK after desorption by the carrier itself. The applicable concentration range, the detection limit, and the relative standard deviation were the following: for AS, from 10 to 100 µg mL^?1; 5.65 µg mL^?1; 3.4% (at 50 µg mL^?1); and for AK, between 40 and 100 µg mL^?1; 11.9 µg mL^?1 and 1.61% (at 50 µg mL^?1). The method was applied and validated satisfactorily for the determination of AS and AK blends in tabletop sweeteners. The results were compared against an HPLC reference method.     

N-bromosuccinimide-fluorescein system for the determination of protein by flow injection chemiluminescence

A method for flow injection with chemiluminescence (CL) detection has been developed for the determination of proteins. It is based on the luminescence of the N-bromosuccinimide-fluorescein-protein system, where fluorescein is used as an energy transfer reagent in alkaline medium. The CL of the system is strongly enhanced by hexadecyl trimethyl ammonium bromide. Optimum conditions and possible mechanisms have been investigated. Under optimum experimental conditions, the linear range is from 0.4 to 40 µg·mL^?1 for egg albumin, 0.2 to 20 µg·mL^?1 for bovine serum albumin, and from 1 to 100 µg·mL^?1 for bovine hemoglobin. The detection limits are 37, 62, and 240 ng·mL^?1, respectively.     

Indirect Simultaneous Kinetic Determination of L‐Cysteine and Homocysteine by ANNs

Abstract

Simultaneous determination of cysteine and homocysteine in binary mixtures was performed by application of neural networks on the spectral kinetic data. This method is based on the complexation of bivalent iron with 2,2′–bipyridin (bipy). Iron(III) is quantitatively reduced to iron(II) with cysteine and homocysteine in the presence of 2,2′–bipyridin producing iron(II)–bipy complex (λmax=522 nm), and it can be used as a visible spectrophotometric signal for indirect simultaneous determination of the cysteine and homocysteine concentrations. On the basis of the difference in the rate between the two reactions, these two amino acids can be determined simultaneously using principal component‐artificial neural networks (PC‐ANN). The parameters controlling behavior of the system were investigated and optimum conditions selected. Determinations were made over the concentration range 0.10–5.50 µg · mL^?1 of cysteine and 0.1–5.00 µg · mL^?1 of homocysteine. Applying this method satisfactorily to simultaneous determination of these amino acids with total relative standard error less than 5% validated the proposed method.     

Development and Validation of Selective Spectrophotometric Methods for the Determination of Pregabalin in Pharmaceutical Preparation

Three simple, quick and sensitive methods are described for the spectrophotometric determination of pregabalin (Pgb) in pharmaceutical preparations. Among them, the first two methods are based on the reaction of Pgb as n-electron donors with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) and 7,7,8,8-tetracyanoquinodimethane (TCNQ) as π-acceptors to give highly colored complex species. The colored products were quantitated spectrophotometrically at 494 and 841 nm for DDQ and TCNQ, respectively. Optimization of the different experimental conditions was conducted. Beer’s law was obeyed in the concentration ranges 2.0—30.0 and 1.5—10 µg•mL－1 for DDQ and TCNQ methods, respectively. The third method is based on the interaction of ninhydrin (NN) with primary amine present in the pregabaline. This reaction produces a blue coloured product in N,N-dimethylformamide (DMF) medium, which absorbs maximally at 573 nm. Beer’s law was found in the concentration range 40.0—180.0 μg•mL－1. The methods were applied successfully to the determination of this drug in pharmaceutical dosage forms.     

A Spectrophotometric Study of Streptomycin Effect on the Clinical Urea Determination

The results of studying inhibitory effect of streptomycin on the modified Berthelot reaction were presented in this paper and a new kinetic method for determining streptomycin in pharmaceutical preparations and human urine was developed on the basis of the obtained results. The rates of catalytic and catalytic‐inhibitory reaction were monitored at 700 nm (t=25±0.1°C) using UV/vis spectrophotometer. By analyzing the spectra and experimental dependences of the catalytic and catalytic‐inhibitory reaction rates on the reactant concentrations, it was noticed that streptomycin attacked nitroprusside and hypochlorite causing the inhibition of the production of 2,2′‐dicarboxylindophenol. According to this effect, an analytical decrease for determination of urea by modified Berthelot reaction appeared in the presence of small amounts of streptomycin. Beer's law was obeyed in the interval of streptomycin sulfate concentration from 18.2 to 182 µg·mL^?1. The detection limit calculated by two methods was obtained at 11.75 µg·mL^?1 and 8.54 µg·mL^?1. The relative standard deviation of 0.55%–8.83% and the recovery of 109.10% were determined. The obtained results were validated using the referent HPLC method.     

Voltammetric Determination of Rosiglitazone in Pharmaceutical Preparations and Human Plasma

Abstract

The voltammetric behavior of rosiglitazone was studied using direct current (DC_t), differential pulse (DPP), and alternating current (AC_t) polarography. The drug manifests cathodic waves over a pH range of 2–11.2. In Britton‐Robinson buffer (BRb; pH 4), the diffusion current–concentration relationship was found to be rectilinear over a range of 4–24 µg · mL^?1 and 0.1–16 µg · mL^?1 using DC_t and DPP modes, respectively, with minimum limits of detection (LOD) of 0.15 µg · mL^?1 and 0.07 µg · mL^?1 using the DC_t and DDP modes, respectively. The diffusion‐current constant (I _d) was 6.63±0.03 (n=5). The proposed method was successfully applied to the determination of the studied compound both in pure form and in formulations. The mean percentage recoveries in tablets were 100.09±1.18 and 100.85±0.88 (n=5) using DC_t and DPP modes, respectively. Furthermore, the proposed method, adopting the DPP mode, was applied to the determination of rosiglitazone in spiked human plasma and the obtained mean percentage recoveries were 99.14±3.29 (n=4).     

A Novel Method for the Determination of Streptomycin Using Sodium Nitroprusside as a Chromogenic Reagent by Spectrophotometry

Abstract

A rapid and simple spectrophotometric method for the determination of streptomycin has been developed and validated. The method was based on the reaction of streptomycin with sodium nitroprusside in the alkaline medium forming a red product measured at the maximum absorption of 495 nm. The stoichiometric ratio of the product is 1:1. Beer's law is obeyed in a range of 1.87 µg mL^?1 ～ 279.8 µg mL^?1 of streptomycin and ?₄₉₅ is 6.0 × 10³ L·mol^?1 cm^?1.Under the optimum condition, the equation of linear regression is A = 0.00742 + 0.05683 C (× 10⁵ mol·L^?1), with a linear correlation coefficient of 0.9990. The detection limit (3σ/k) is 0.96 µg mL^?1, the relative standard deviation (RSD) is 2.40%, and the average recovery rate is 98.3%–102.7%. Every parameter has been optimized, and the reaction mechanism has been studied. The proposed method has been successfully applied to the determination of streptomycin for injections and tablets of pharmaceutical preparation. Analytical results obtained by this new method were very gratifying.     

Second‐order Scattering and Frequency Doubling Scattering Spectra of Thallium(III)‐Methotrexate System and Its Analytical Application

In pH 4.9 Britton-Robinson buffer solution, methotrexate (MTX) reacted with thallium(III) to form a 3∶1 chelate. This resulted in great enhancement of second-order scattering (SOS) spectra and frequency doubling scattering (FDS) spectra and appearance of new SOS and FDS spectra. Their maximum wavelengths were located at 520 and 390 nm, respectively. The increments of scattering intensities (ΔI) were directly proportional to the concentrations of MTX in the ranges of 0.022—2.0 μg•mL－1 (SOS method) and 0.008—2.5 μg•mL－1 (FDS method). The methods exhibited high sensitivities. The detection limits for MTX were 7.4 ng•mL－1 (SOS method) and 2.3 ng•mL－1 (FDS method), respectively. The optimum conditions of the reaction, the influencing factors and the effects of coexisting substances were investigated. A highly sensitive, simple and fast method for the determination of MTX has been developed. The method can be applied satisfactorily to the determination of MTX in human serum samples. In this work, the charge distribution of MTX was calculated by a CNDO quantum chemistry method. In addition, the reaction mechanism was discussed.     

Development of High Performance Liquid Chromatography Method for Costunolide and Dehydrocostuslactone in Mice Plasma and Tissues:Application to Pharmacokinetic Study

A simple and sensitive high performance liquid chromatographic (HPLC) method for simultaneous determination of costunolide and dehydrocostuslactone in mice plasma and tissues was developed and validated. Costunolide and dehydrocostuslactone were extracted into acetonitrile and separated using an isocratic mobile phase, on a Hypersil ODS C18 column. The effluent was monitored by UV detector at 210 nm and at a flow rate of 1.0 mL· min^?1 and 25°C. The linearity ranges of proposed method were 0.223–8.920 µg·mL^?1 for costunolide and 0.227–9.080 µg·mL^?1 for dehydrocostuslactone. The intra‐day and inter‐day RSD of the assay method for the two components were less than 5%, and mean recovery was within the 86.5% to 101.8% range. The method was found to be precise, accurate, and specific during the study. The method was successfully applied for pharmacokinetic study of costunolide and dehydrocostuslactone after application of ethanol extraction of Muxiang (EEM) in mice.     

钯（II）-克林霉素-卤代荧光素体系的共振瑞丽散射光谱及其分析应用

在pH为5.0-5.4的乙酸-乙酸钠缓冲溶液中,克林霉素（Clin）与钯(Ⅱ)形成螯合阳离子,它能进一步与二碘荧光素（DIF）,赤藓红（Ery）,曙红Y（EY）等卤代荧光素类染料反应形成1：1：1的三元离子缔合物,此时将引起吸收光谱变化和荧光猝灭,同时还导致共振瑞利散射(RRS)的急剧增强并产生新的RRS光谱,钯(Ⅱ)-克林霉素与DIF,Ery和EY形成产物的最大散射波长分别位于285,287,32 1nm处,另外还有些较弱的散射峰存在。散射增强（ΔI）与克林霉素浓度在一定范围内成正比,可用于克林霉素的定量测定。对于DIF,Ery和EY体系的线性范围和检出限分别为0.025-2.1μg•mL-1和7.8 ng•mL-1,0.053-2.4μg•mL-1和16.0 ng•mL-1;以及0.038-2.4μg•mL-1和11.0 ng•mL-1。本文研究了适宜的反应条件,考察了共存物质的影响,表明方法有较好的选择性,基于三元离子缔合物的RRS光谱,发展了一种高灵敏、简便快速测定克林霉素的新方法。文中还对离子缔合物的组成,结构和反应机理,以及离子缔合物对吸收,荧光和RRS光谱的影响进行了讨论。     

Determination of Poisonous Trace Element Thallium(I) by Kinetic Catalytic Reaction

Abstract

A effective and simple determination of poisonous trace element thallium(I) by means of kinetic catalytic reaction is proposed. The method is based on a catalytic effect of thallium(I) on a luminol-hydrogen peroxide system. Three different kinds of surfactants, cetrimonium bromide (CTMAB), sodium dodecyl sulphate (SDS), and Tween-80, are also investigated to improve the detection sensitivity. In optimum conditions, a highly selective and sensitive method for detecting trace thallium(I) has been established. The detection limit is 0.0073 µg · mL^?1, the relative standard deviation for six determinations of 0.04 µg · mL^?1 thallium(I) is less than 4.0%, and the linear range of determination is 0.02–0.1 µg · mL^?1.     

Determination of Potassium Ferrocyanide in Foods by Resonance Rayleigh Scattering Method with Double-Charged Triaminotriphenylmethane Dyes

In pH 1.0 acidic medium, double-charged triaminotriphenylmethane dyes such as methyl green （MEG） and iodine green （IG） react with potassium ferrocyanide to form 2 ： 1 ion-association complexes by virtue of electrostatic forces and hydrophobic interaction. It results in the change of absorption and the great enhancement of resonance Rayleigh scattering （RRS） and the appearance of new RRS spectra. Two systems have similar spectral characteristics and their maximum RRS wavelengths are all located at 276 nm and smaller peaks are located at 332 and 457 nm, respectively. The intensity of RRS is directly proportional to the concentration of [Fe（CN）6]^4- in the range of 0.03-5.7 μg·mL^-1 （MeG system） or 0.04-5.9 μg·mL^-1 （IG system）. The RRS method has high sensitivity and the detection limit （3σ） for potassium ferrocyanide is 9.3 ng·mL^-1 （MeG system） or 11.2 ng·mL^-1 （IG system）. The optimum conditions, influencing factors and effects of foreign substances are investigated. The method also has a good selectivity. A sensitive, rapid and simple RRS method for the determination of potassium ferrocyanide in salinized food and table salt has been developed.     

Analysis of Carbamazepine in Tablet and Human Serum by Sweeping‐Micellar Electrokinetic Chromatography Method

Abstract

A sensitive and simple micellar electrokinetic chromatography (MEKC) method was developed for the determination of the antiepileptic drug carbamazepine (CBZ) using a sweeping on‐line concentration method with photodiode array detection. The effect of pH, concentration of the running buffer solution, organic modifier, applied voltage and injection time on the concentration efficiency and separation was investigated. An untreated fused‐silica capillary was used (50 cm; effective length, 40 cm, 75 µm i.d.) for the analysis. The background solution (BGS) was 50 mmol · L^?1 NaH₂PO₄ (pH 3.0) containing 100 mmol · L^?1 SDS and 20% acetonitrile (5.82 ms · cm^?1) with an applied voltage of ?20 kV at 25°C. Sample introduction was performed at 0.5 psi for 90 s with diode array detection at 214 nm. For the method, the calibration curve was linear over a range of 0.5–40 µg · mL^?1 for CBZ with a correlation coefficient of 0.998. The detection limit (S/N=3∶1) of CBZ was 0.10 µg · mL^?1. About 100‐fold improvement in concentration sensitivity was achieved in terms of peak height by the sweeping method compared to conventional injection method. The sweeping‐MEKC method has been successfully applied to the analysis of CBZ in tablet and human serum.