含1,8-二甲氧基-9,10-二氢蒽和巴比妥酸的发色团化合物的合成和NLO性质

在哌啶和醋酸催化下,1,8-二甲氧基-4,5-二甲酰基-9,10-二氢蒽和异佛尔酮巴比妥酸衍生物经Knoevenagel缩合合成了具有NLO性质的发色团化合物。在这些发色团中,环锁定的三烯和9,10-二氢蒽用作共轭桥,巴比妥酸和甲氧其分别作为吸电子和给电子基, 组成非共轭的两个D-π-A单位。溶剂变色法和紫外光谱研究证实它们比相应的参考物有较大的NLO活性并能保持与参考化合物相同的透光性。     

Synthesis and characterization of new complexes of the type [Ru(CO)2Cl2 (2‐phenyl‐1,8‐naphthyridine‐kN) (2‐phenyl‐1,8‐naphthyridine‐kN′)]. Preliminary applications in homogeneous catalysis

Novel ruthenium (II) complexes were prepared containing 2‐phenyl‐1,8‐naphthyridine derivatives. The coordination modes of these ligands were modified by addition of coordinating solvents such as water into the ethanolic reaction media. Under these conditions 1,8‐naphthyridine (napy) moieties act as monodentade ligands forming unusual [Ru(CO)₂Cl₂(η¹‐2‐phenyl‐1,8‐naphthyridine‐ kN )(η¹‐2‐phenyl‐1,8‐naphthyridine‐kN′)] complexes. The reaction was reproducible when different 2‐phenyl‐1,8‐naphthyridine derivatives were used. On the other hand, when dry ethanol was used as the solvent we obtained complexes with napy moieties acting as a chelating ligand. The structures proposed for these complexes were supported by NMR spectra, and the presence of two ligands in the [Ru(CO)₂Cl₂(η¹‐2‐phenyl‐1,8‐naphthyridine‐ kN )(η¹‐2‐phenyl‐1,8‐naphthyridine‐kN′)] type complexes was confirmed using elemental analysis. All complexes were tested as catalysts in the hydroformylation of styrene showing moderate activity in N,N′‐dimethylformamide. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis and characterization of main‐chain NLO oligomers and polymer that contain 4‐dialkylamino‐ 4′‐(alkylsulfonyl)azobenzene chromophores

An ω‐amino carboxylic acid monomer that contained a nonlinear optical (NLO) chromophore was prepared by a convergent synthesis. Strategies for selective protection/deprotection of the amino and carboxylic acid functionalities were developed. The protected monomer, 4‐[N‐(4‐benzyloxycarbonyl)butyl‐N‐methylamino]‐4′‐[2″,5″‐bis(decyloxy)‐4″‐(phthalimidomethyl)benzylsulfonyl]azobenzene, could be deprotected selectively or sequentially to give HOOC‐monomer‐N‐phthaloyl, benzyl‐OOC‐monomer‐NH₂, or HOOC‐monomer‐NH₂. Sequential synthesis was performed to yield main‐chain NLO dimers and tetramers. This was accomplished by selective deprotection and dicyclohexylcarbodiimide coupling. The HOOC‐monomer‐NH₂ was polymerized by treatment with diphenylphosphoryl azide to give a main‐chain NLO polyamide. The monomer, dimer, tetramer, and polymer NLO materials were characterized by ¹H, ¹³C, IR, and UV–visible spectroscopy as well as by gel permeation chromatography, differential scanning calorimetry, and elemental analysis. The NLO properties of these materials were measured. Thin films of the oligomers and polymer were prepared by spin casting on indium‐tin oxide coated glass. The second‐order NLO properties of the oligomers and polymer thin films were studied by in situ corona poling/second‐harmonic generation and attenuated total reflection methods. The optimal poling temperatures were significantly lower than the melting temperatures or glass‐transition temperatures of the oligomers and polymer. The poling efficiency increased in the following order: monomer, oligomers, and polymer. An electro‐optic coefficient of 4 pm/V at 1.06 μm was obtained for the polymer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 546–559, 2000     

Highly Efficient Singlet–Singlet Energy Transfer in Light‐Harvesting [60,70]Fullerene–4‐Amino‐1,8‐naphthalimide Dyads

New C₆₀ and C₇₀ fullerene dyads formed with 4‐amino‐1,8‐naphthalimide chromophores have been prepared by the Bingel cyclopropanation reaction. The resulting monoadducts were investigated with respect to their fluorescence properties (quantum yields and lifetimes) to unravel the role of the charge‐transfer naphthalimide chromophore as a light‐absorbing antenna and excited‐singlet‐state sensitizer of fullerenes. The underlying intramolecular singlet–singlet energy transfer (EnT) process was fully characterized and found to proceed quantitatively (Φ_EnT≈1) for all dyads. Thus, these conjugates are of considerable interest for applications in which fullerene excited states have to be created and photonic energy loss should be minimized. In polar solvents (tetrahydrofuran and benzonitrile), fluorescence quenching of the fullerene by electron transfer from the ground‐state aminonaphthalimide was postulated as an additional path.     

Eco‐friendly synthesis of 1,8‐dioxo‐octahydroxanthenes catalyzed by ionic liquid in aqueous media

A biodegradable functionalized ionic liquid 3‐(N,N‐dimethyldodecylammonium)propanesulfonic acid hydrogen sulfate ([DDPA][HSO₄]) was prepared and used as a Brønsted acid–surfactant‐combined catalyst for the eco‐friendly one‐pot synthesis of 1,8‐dioxo‐octahydroxanthenes at 100°C in water. Under these conditions, the reaction of various aromatic aldehydes with dimedone generated 1,8‐dioxo‐octahydroxanthenes in good yields with a simple postreaction procedure. The products could simply be separated from the catalyst/water system, and the catalyst could be reused at least six times without noticeably decreasing the catalytic activity. J. Heterocyclic Chem., (2011).     

Synthesis and Antimicrobial Activity of Novel Iminophosphocin Derivatives

Iminophosphocins 8a – 8e and 9a – 9e were synthesized in four‐step reactions via Staudinger reaction. 3‐(Bromomethyl)‐1,2,3,4,5‐pentahydro‐3λ⁵‐naphtho[1,8‐f,g][1,5,3]diazaphosphocin‐3‐one ( 3 ) was prepared by reacting tris(bromomethyl)phosphineoxide ( 1 ) with 1,8‐diaminonaphthalene ( 2 ) in the presence of triethylamine (TEA) in dry tetrahydrofuran (THF), and treated with L‐valine methyl ester ( 4 ) and bis(2‐chloroethyl)amine ( 5 ) in the presence of TEA in dry THF to get 3‐methyl‐2‐[(3‐oxo‐1,2,3,4,5‐pentahydro‐3λ⁵‐naphtho[1,8‐f,g][1,5,3]diazaphosphocin‐3‐yl)methylamino]butanoate ( 6 ) and 3‐[di(2‐chloroethyl)aminomethyl]‐1,2,3,4,5‐pentahydro‐3λ⁵‐ naphtho[1,8‐f,g][1,5,3]diazaphosphocin‐3‐one ( 7 ). The compounds 6 and 7 were treated with trichlorosilane (SiCl₃H) in dry tetrahydrofuran (THF) to form the trivalent P(III) intermediates 8 and 9 , which were further treated with various alkyl azides in dry THF in 55–60°C to afford the title compounds 8a – 8e and 9a – 9e . Their structures were established by multi‐nuclear NMR and mass spectra. All the newly synthesized compounds were found to possess moderate anti‐microbial activity.     

Synthesis and characterization of a novel nonlinear optical hyperbranched polymer containing a highly performing chromophore

We report herein the peripheral functionalization of a high glass transition temperature hyperbranched polyimide with a new and highly performing electro‐optic chromophore for the elaboration of a second‐order nonlinear optical material. In this study, the CPO1 chromophore was selected for its very high quadratic hyperpolarizability coefficient (μβ = 31,000 ? 10^?48 esu at 1990 nm) and its ease of synthesis in multigram scale. As a result, the new electro‐optic polymer was characterized by an r₃₃ coefficient around 40 pm/V at 1.5 µm, although the poling conditions were not optimized. For sake of comparison, the electro‐optic r₃₃ coefficient of our previously reported similar polymer functionalized with the well‐known Disperse Red One chromophore was also measured using the technique and gave a much lower r₃₃ coefficient. This study underscores that hyperbranched polymers are particularly promising matrices to host highly efficient chromophore to achieve more efficient and more stable electro‐optic devices than classical linear polymers. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and properties of a second‐order nonlinear optical side‐chain polyimide

A thermal stable aromatic polyimide (PI) with side‐chain second‐order nonlinear optical (NLO) chromophores has been developed. The PI was prepared by the ring‐opening polyaddition of 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride with a new diamine having two N‐ethyl‐N‐[4‐[(6‐chlorobenzothiazol‐2‐yl)diazenyl]phenyl]‐2‐aminoethanol units as the NLO chromophore, followed by poling during or after the thermal imidization process. The resulting PI had number and weight‐average molecular weights (M_n, M_w) of 25,000 and 80,000, respectively, and a relatively high glass transition temperature of 180°C. The second harmonic coefficient (d₃₃) of PI at the wavelength of 1.064 μm was 138 pm/V (329.6 × 10⁻⁹ esu) and remained unchanged at elevated temperatures. The corona poling process of the NLO‐substituted poly(amic acid) to the PI was also studied in detail by measuring the second harmonic generation (SHG) from the polymer films. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1321–1329, 1999     

Design and synthesis of a thermally stable second‐order nonlinear optical chromophore and its poled polymers

A multiple charge‐transfer second‐order nonlinear optical (NLO) chromophore 2,3‐bis(4‐aminophenyl)‐5,6‐dicyanopyrazine (BAPDCP) was successfully designed and synthesized. It was characterized by ¹H NMR, mass spectrometry, Fourier transform infrared spectroscopy, and elemental analysis. The first hyperpolarizability β of BAPDCP was measured with the Hyper–Rayleigh scattering technique, which was 123.5 × 10^?30 esu. The donor‐embedded prepolyimide and prepolyurea were also synthesized by a polyaddition reaction. Thermogravimetric analysis and differential scanning calorimetry demonstrated that either the chromophore or the polymers have fine thermal stability. The thin films of prepolymers were prepared by coating on ITO glass substrate and poled by corona poling at elevating temperature. The second‐order NLO coefficients d₃₃ of the films were measured by in situ second‐harmonic generation measurements. The d₃₃ were deduced as 27.7 and 16.5 pm/V for polyurea and polyimide at 1064 nm fundamental wavelength, respectively. The onset depoling temperature of the polyimide and polyurea were both as high as 200 °C. To understand the temperature effect to the orientation thermal stability of polyimide, two films were treated at different final poling temperatures. The depoling experimental results showed that the orientation stability is higher, as raising the final treated temperature but the d₃₃ value are almost similar. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2846–2853, 2003     

Vinyl monomers bearing chromophore moieties and their polymers. V. Synthesis and fluorescence behavior of a vinyloxy monomer bearing electron-accepting chromophore moiety,N-(2-(vinyloxy)ethyl)-1,8-naphthalimide,and its polymer

A vinyloxy monomer bearing electron-accepting chromophore, N-(2-(vinyloxy)ethyl)-1,8-naphthalimide (VOENI), was synthesized by reaction of potassium 1,8-naphthalimide with 2-chloroethyl vinyl ether. VOENI can be homopolymerized by cationic initiation and copolymerized with maleic anhydride (MAn) under radical initiation. The fluorescence behaviors of VOENI and its polymers were investigated. It has been found that the fluorescence intensity of the VOENI monomer is much lower than that of its polymers at the same chromophore concentration. This means that a “structural self-quenching effect” (SSQE) has been also observed in the vinyloxy monomer consisting of an electron-accepting chromophore, which has opposite electronic structure in comparison with acrylates bearing electron-donating chromophores as we have reported previously. The SSQE is attributed to the charge-transfer interaction between the electron-accepting chromophore and the electron-donating double bond in the same molecule. The fluorescence quenching of 1,8-naphthalic anhydride and P(VOENI-co-MAn) by ethyl vinyl ether (EVE), dihydrofuran, triethylamine (TEA), etc. evidences that the electron-rich vinyloxy group does act as an important role in the SSQE of VOENI. C₆₀ can also quench the fluorescence of the polymers, and an upward deviation from the linearity of the Stern–Volmer plot was observed showing that C₆₀ acted as a powerful electron donor to quench the fluorescence of the copolymer. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1111–1116, 1998     

Quadratic nonlinear optical and preliminary piezoelectric investigation of crosslinked samples obtained from a liquid chromophore

A push–pull chromophore has been synthesized, which is liquid at room temperature and can be crosslinked owing to the presence of two methacrylate moieties. Thin films of the chromophore have been prepared by spin coating, and they have been simultaneously crosslinked and poled under strong electric field. On the poled crosslinked films, the quadratic nonlinear optical (NLO) characterization was performed through nonresonant second harmonic generation measurements at 1368 nm as the fundamental wavelength, yielding a fairly good d₃₃ value of 46 pm/V, with retention of 80% of that value after 2 months at 85 °C. Following the theoretical issue that the quadratic NLO and piezoelectric tensors of a material have the same symmetry properties, and exploiting the easy processing of the chromophore in the liquid phase, we have prepared poled crosslinked samples of the chromophore suitable for piezoelectric tests that were performed using a commercial piezoceramic sample as the reference. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Synthesis and characterization of new π‐conjugated polymers containing 1,8‐naphthyridine in the main chain: Role of the 1,8‐naphthyridine unit in π‐conjugated polymers

Alternating π‐conjugated copolymers of 1,8‐naphthyridine‐2,6‐diyl ( 1,8‐Nap ) with 9,9‐dioctylfluorene‐2,7‐diyl ( P(Flu‐Ph‐1,8‐Nap) ) and 2,5‐didodecyloxy‐1,4‐phenylene ( P(ROPh‐Ph‐1,8‐Nap) ) have been synthesized by Pd‐catalyzed organometallic polycondensation. The copolymers showed UV‐vis absorption peaks at around 390 nm in o‐dichlorobenzene. The polymers were photoluminescent both in o‐dichlorobenzene and in the solid state. In o‐dichlorobenzene, the emission peaks of P(Flu‐Ph‐1,8‐Nap) and P(ROPh‐Ph‐1.,8‐Nap) appeared at λ_EM = 440 and 471 nm, with quantum yields of 87% and 66%, respectively. Electrochemical data revealed that 1,8‐Nap behaved as a typical electron‐accepting unit. When P(Flu‐Ph‐1,8‐Nap) was treated with 10‐camphorsulfonic acid, the emission peak shifted to λ_EM = 598 nm. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Nonlinear optical polyimides consisting of chromophore‐containing dendrons with site‐isolation effect

To investigate the dendritic structure effects on the electro‐optical (EO) coefficients and thermal stability of the nonlinear optical (NLO) active materials, a bifunctional compound, IDD (4‐isocyanato‐4′(3,3‐dimethyl‐ 2,4‐dioxo‐acetidino)‐diphenylmethane) was used as a building block to synthesize a series of novel NLO chromophore‐containing dendritic structures including Generation 0.5 (G0.5) to Generation 3 (G3). The glass transition temperatures (T_g) of G1–G3 dendrons were in the range of 76–116°C, whereas only the G0.5 dendron exhibited a melting temperature (T_m), 98°C. Moreover, a series of NLO‐active guest–host systems ranging from polyimide‐G0.5 (PI‐G0.5) to polyimide‐G3 (PI‐G3) were prepared by blending 20 wt% chromophore‐containing dendron with a high T_g polyimide. EO coefficients ranged from 6.1 to 12.9 pm/V. The r₃₃/dye content ratio increased with increasing generation of dendron‐containing polyimide samples. Particularly, the improvement in r₃₃/dye content ratio of PI‐G2.5 sample tripled as compared to that of the guest–host sample with Disperse Red 1. Excellent temporal stability of PI‐G0.5 and PI‐G1.5 at 80°C was obtained. Moreover, waveguide properties for NLO polymers containing higher generation dendrons (3.1–3.6 dB/cm at 830 nm) were also obtained. Copyright © 2008 John Wiley & Sons, Ltd.     

Mild and Efficient Synthesis of 1,8‐Naphthalide and 1,8‐Naphthalenedimethanol

Abstract

Mild and efficient procedures have been developed for synthesis of 1,8‐naphthalide and 1,8‐naphthalenedimethanol. In an ice‐water bath, 1,8‐naphthalide was prepared from 1,8‐naphthlic anhydride using LiAlH₄ as reducing agent. 1,8‐Naphthalenedimethanol was obtained with good yield from reduction of 1,8‐naphthalic anhydride by LiAlH₄ and Lewis acids at room temperature. The effects of various factors on the reduction of 1,8‐naphthalic anhydride with LiAlH₄ were investigated.     

Synthesis of nonlinear optical polyimides containing azodiamine derivative chromophores and their electrooptic and thermal properties

Some thermally stable second‐order nonlinear optical (NLO) polyimides were synthesized. The polyimides were prepared by the ring‐opening polyaddition of 4,4′‐(hexafluoroisopropylidene) diphthalic anhydride and pyromellitic dianhydride with two aromatic azodiamine derivatives as the NLO chromophores. These chromophores, based on a nitro group connected with azobenzene as the acceptor end of a donor–π‐bridge–acceptor chromophore and a diamine group as the donor end, had specific chemical stability. On the basis of ZERNER'S INDO methods, according to the sum‐over‐states formula, a program for the calculation of nonlinear second‐order optical susceptibilities was devised. The resulting polyimides had high number‐average and weight‐average molecular weights of up to 26,000 and 53,500, respectively, and a large glass‐transition temperature of 248 °C. With an in situ poling and temperature ramping technique, the optimal temperatures (T_opt's) for corona poling were obtained for the largest second‐order NLO response. The electrooptic coefficient (γ₃₃) of a polyimide at a wavelength of 830 nm was up to 21 pm/V after corona poling under its T_opt, and the value remained at elevated temperatures (>90.6% was retained at 240 °C for >120 h). The thermal stability of the NLO polyimides was studied with UV spectrometry after poling of the films. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2478–2486, 2002     

Synthesis and nonlinear optical properties of hyperbranched polytriazole containing second‐order nonlinear optical chromophore

The hyperbranched polytriazole (hb‐PTA) containing second‐order nonlinear optical chromophore was synthesized through “A₂ + B₃” approach based on “click reaction.” Its corresponding linear analogue (l‐PTA) was prepared for comparison. The hb‐PTA has better solubility in common organic solvents than the l‐PTA. Both the polymers exhibit good thermal stability with 5% weight loss temperatures over 260 °C. The poled film of hb‐PTA exhibits much higher second‐harmonic coefficient (96.8 pm/V) than that of l‐PTA (23.5 pm/V). The three‐dimensional spatial isolation effect resulting from the highly branched structure and the crosslinking of the terminal acetylene groups at moderate temperature play important roles in the enhancement of optical nonlinearity. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1140–1148, 2008     

An enhanced host–guest electro‐optical polymer system using poly(norbornene‐dicarboximides) via ROMP

High glass transition temperature poly(N‐cyclohexyl‐5‐norbornene‐2,3‐dicarboximide)s (NDI)s prepared by ring opening metathesis polymerization yielded polymers with a narrow polydispersity and well‐controlled molecular weight materials when using the Grubbs first generation initiator. Polymers produced using the Grubbs second generation initiator could not be controlled easily. By initiator selection it was also possible to synthesize polymers with either 98 or 52% trans microstructures. These materials were employed as electro‐optic (EO) polymer hosts for high molecular hyperpolarizability (β) phenyl vinylene thiophene vinylene bridge chromophores. This chromophore was modified by the incorporation of a tert‐butyldiphenylsilane group. The addition was able to further increase its EO coefficient (r₃₃) to reach 93 pm/V in a trans rich poly(NDI) produced by the Grubbs first generation initiator, compared to a benchmark chromophore / polymer combination. We investigated in detail the relationship between polymer microstructure and their absolute molecular weight on forming the best host–guest with the high β chromophore. Our results indicate that by utilizing a very simple host–guest system a high r₃₃ can be realized. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and nonlinear optical properties of methacrylate polymers based on 2‐[4‐(N‐methyl,N‐hydroxyethylamino)phenylazo]‐phenyl‐6‐nitrobenzoxazole chromophore

Methacrylate polymers containing different molar contents of nonlinear optical (NLO) active molecular segments based on 2‐[4‐(N‐methyl,N‐hydroxyethylamino)phenylazo]‐phenyl‐6‐nitrobenzoxazole chromophores were synthesized, and their phase behavior and second‐order NLO properties were investigated. Polymers containing 6–17 mol % chromophore segments allowed the preparation of amorphous and optically clear thin films. Some mesomorphic structuration was exhibited by a polymer with 33 mol % chromophoric units. However, this feature did not prevent the possibility of investigating the NLO properties. Nonlinear resonance‐enhanced d₃₃ coefficients were determined by second harmonic generation experiments on spin‐coated, corona‐poled thin films at λ = 1064 nm. Values ranging from 40 to 60 pm/V were measured with increasing chromophore molar contents. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1841–1847, 2003     

Cyclometalated Iridium(III) and Rhodium(III) Complexes Containing Naphthyridine Ligands: Synthesis,Characterization and Biological Studies

The synthesis, crystal structure, and biological activity of new bis‐cyclometalated compounds [M(ptpy)₂(4‐chloro‐2‐methyl‐1,8‐naphthyridine)]PF₆ [M = Rh ( 1 ); M = Ir ( 2 ); ptpy = 2‐(p‐tolyl)pyridinato] and [M(ptpy)₂(2‐methyl‐1,8‐naphthyridine)]PF₆ [M = Rh ( 3 ); M = Ir ( 4 )] are described. The new compounds were prepared by the reaction of [{M(μ‐Cl)(ptpy)₂}₂] (M = Rh, Ir) with the corresponding naphthyridine ligands. The molecular structures of compounds 1 , 3 , and 4 were confirmed by single‐crystal X‐ray diffraction studies.     

Novel Chromophore‐Functionalized Poly[2‐(trifluoromethyl) adamantyl acrylate‐methyl vinyl urethane]s with High Poling Stabilities of the Nonlinear Optical Effect

Nonlinear optical vinyl polymers with high glass transition temperature (T_g) were prepared by the functionalization of a fluorinated acrylate‐methyl vinyl isocyanate copolymer. A modified pathway to obtain a thiophene bridged chromophore was worked out. Poled films of the polymers show a fairly high and stable nonlinear optical response, even at elevated temperatures.

The thiophene‐bridged chromophore, based on a substituted dicyanomethylene‐dihydrofuran acceptor, synthesized here.