Synthesis of Block Copolymers of Styrene with <Emphasis Type="Italic">D</Emphasis>,<Emphasis Type="Italic">L</Emphasis>-Lactide by the Sequential Controlled Cationic Polymerization and Ring-Opening Anionic Polymerization

The cationic polymerization of styrene initiated by the system 2-chloro-2-phenylpropane–TiCl₄–pyridine is studied in a mixture CH₂Cl₂–n-hexane at a temperature of –80°С. It is shown that under these conditions polymerization occurs via the living mechanism at [monomer]: [initiator] ≤ 100. The method of preparing polystyrenes with terminal primary hydroxyl groups (M_n = 4000–10000 g/mol) by the sequential controlled cationic polymerization of styrene and the in situ alkylation of 4-phenoxy-1-butanol by polystyrene macrocations is proposed. The resulting functionalized polystyrenes are used as macroinitiators of anionic-coordination ring-opening polymerization of D,L-lactide in the presence of tin bis(2-ethyl hexanoate) [Sn(Oct)₂] in toluene at 80°С. Copolymers polystyrene-block-poly(D,L-lactide) with the controlled length of the poly(D,L-lactide) block (M_n = 10000–17000 g/mol) and a relatively low molecular-weight distribution (M_w/M_n = 1.6–1.8) are synthesized. Formation of the block copolymers is confirmed by ¹Н NMR spectroscopy, gel-permeation chromatography, and atomic force microscopy.     

Kinetic investigation of the polymerization of <Emphasis Type="Italic">D</Emphasis>,<Emphasis Type="Italic">L</Emphasis>-lactide and glycolide via differential scanning calorimetry

The kinetics of polymerization of D,L-lactide and glycolide are studied via differential scanning calorimetry at different temperatures and concentrations of the catalyst tin octanoate. For the polymerization of D,L-lactide and glycolide, the enthalpies are determined to be ?17 ± 1.5 and 16.5 ± 1.5 kJ/mol, respectively. The time to attain reaction equilibration decreases from 300 to 100 min with an increase in temperature from 200 to 220°C. The time of reaction at 200°C decreases from 280 to 100 min as the concentration of the catalyst is increased from 500 to 830 ppm. When the polymerization of glycolide is conducted at temperatures below 200°C, the reaction is accompanied by crystallization of polyglycolide and an increase in the total enthalpy of the process.     

Fast Crystallization and Toughening of Poly(<Emphasis Type="Italic">L</Emphasis>-lactic acid) by Incorporating with Poly(ethylene glycol) as a Middle Block Chain

High molecular weight poly(L-lactic acid)-poly(ethylene glycol)-poly(L-lactic acid) (PLLA–PEG–PLLA; PLGL) triblock copolymers with various lengths of the PLLA blocks were synthesized by ringopening polymerization of L-lactide. The amorphous and crystalline PLLA and PLGL films were prepared by hot pressing with different temperature treatments. PLLA and PEG blocks exhibited good miscibility in the amorphous PLGL samples, while phase separation occurred in the crystalline ones. The flexible PEG blocks not only accelerated the crystallization rate of PLLA but also greatly improve its flexibility. The crystallization time of PLGL copolymers shorten to less than 5 min and copolymers showed much better flexibility than neat PLLA, the maximum fracture strain reached about 600% for amorphous sample. The processing time of PLLA was greatly shortened and the brittleness of material was improved.     

Synthesis and structure of bis(1,2-diaminoethane) copper(II) bis(<Emphasis Type="Italic">o</Emphasis>-hydroxybenzoate) monohydrate and <Emphasis Type="Italic">trans</Emphasis>-diaquabis(1,2-diaminoethane)copper(II) bis(<Emphasis Type="Italic">o</Emphasis>-aminobenzoate)

X-ray structural analysis has been performed for two complex compounds: Cu(en)₂(o-HB)₂H₂O (I) (a = 16.873(4) Å, b = 8.713(2) Å, c = 14.803(3) Å, β = 91.15(2)°, V = 2175.8(8) ų, C2/c, Z = 4, R(F) = 0.0263, 1516 reflections with I > 3σ (I)) and [Cu(en)₂(OH₂)₂]²⁺(o-AB^?)₂ (II) (a = 7.488(5) Å, b = 22.122(8) Å, c = 7.856(5) Å, β = 118.77(2)°, V = 1140.7(11) ų, P2₁/n, Z = 2, R(F) = 0.0432, 1684 reflections with I > 3σ(I)) synthesized under identical conditions (en is ethylenediamine, o-HB is o-hydroxybenzoate, and o-AB is o-aminobenzoate). Although the compounds were assumed to have similar structures and the Cu-Lig bond lengths and the cis and trans angles are acceptable for an octahedral structure, the geometric parameters of o-HB suggest that the copper atom has a plane square environment.     

Ultrasound-assisted synthesis of block copolymers of chitosan and <Emphasis Type="Italic">D</Emphasis>,<Emphasis Type="Italic">L</Emphasis>-lactide: Structure and properties

The block copolymers of chitosan with D,L-lactide are synthesized under UV irradiation of the homogeneous solution of the corresponding homopolymers with the yield of the main product being 96 wt %. The polyblock structure of copolymer chains, in which the size of polylactide blocks is varied in the range of (2.9–22.0) × 10³ depending on the synthesis conditions, is demonstrated. The incorporation of polylactide blocks into the structure of chitosan leads to development of the material structure close to the structure of polylactide. The films of the block copolymers containing 16 wt % polylactide and having a molecular mass of its blocks of 22.0 × 10³ have increased values of breaking stress (47 MPa) and ultimate strain (20%) compared to chitosan (24 MPa and 1.9%, respectively). The obtained block copolymers possess bactericidal properties.     

Binuclear copper(II) complexes with acyldihydrazones of <Emphasis Type="Italic">N</Emphasis>-benzenesulfonyl-<Emphasis Type="Italic">L</Emphasis>-aspartic acid

The structure and the EPR spectra of copper(II) coordination compounds with acyldihydrazones of N-benzenesulfonyl-L-aspartic acid and salicylaldehyde (2-hydroxyacetophenone) were described. The compounds were studied by chemical and thermal analyses, IR spectroscopy, and EPR. The molecular and crystal structures of copper(II) complexes with N-benzenesulfonyl-L-aspartic acid bis(salicylidene)hydrazone (H₄L¹) [Cu₂L¹ · 2Py] · 1.5 H₂O was determined by X-ray diffraction. The crystals are triclinic: a = 10.4714(4) Å, b = 12.9702(5) Å, c = 14.6187(9) Å, α = 104.763(2)°, β = 93.082(2)°, γ = 111.4240(10)°, space group P \(\bar 1\), Z = 2. The binuclear complexes containing copper cations whose coordination polyhedra are connected by an aliphatic spacer (Cu...Cu, 8.669 Å) are additionally linked by phenoxy bridges (Cu...Cu, 3.398 Å). The EPR spectra of these compounds in solutions exhibit an isotropic signal of seven HFS lines due to two equivalent copper ions with the spin Hamiltonian parameters g = 2.115?2.120, a _Cu = (35.5?38.0) × 10^?4 cm^?1, which is indicative of weak exchange interactions between the paramagnetic sites.     

Crystal and molecular structure of <Emphasis Type="Italic">tris</Emphasis>(<Emphasis Type="Italic">m</Emphasis>-chlorophenyl)phosphine selenide

The crystal and molecular structure of tris(m-chlorophenyl)phosphine selenide, C₁₈H₁₂Cl₃PSe (I), was investigated by X-ray diffraction (XRD) analysis. The trigonal rhombohedral structure of I (space group \(R\overline 3 c\), a = 14.110(2) Å, c = 32.360(4) Å, Z = 12) was solved by direct methods and refined by least squares in an anisotropic approximation (R = 0.029) for 1319 averaged measured reflections (CAD-4 automatic diffractometer, λCuK_α).     

Synthesis and structure of Pt(II) acetamidate complexes containing <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethyl-substituted ethylenediamine and trimethylenediamine

Reactions of acetamide with platinum(II) diamines [Pt(N,N-DimeEn)Cl₂], [Pt(Tm)Cl₂], and [Pt(N,N-DimeTm)Cl₂] (N,N-DimeEn = (CH₃)₂N(CH₂)₂NH₂, Tm = NH₂(CH₂)₃NH₂, N,N-DimeTm = (CH₃)₂N(CH₂)₃NH₂) with preliminary precipitation of chlorine ions by silver salts gave binuclear Pt(II) acetamidates [Pt₂(CH₃)₂N(CH₂)₂NH₂)₂(μ-NHCOCH₃)₂](NO₃)₂ · H₂O (I), [Pt₂(NH₂(CH₂)₃NH₂)₂)(μ-NHCOCH₃)₂](NO₃)₂ · H₂O (II), and [Pt₂(CH₃)₂N(CH₂)₃NH₂)₂(μ-NHCOCH₃)₂](HSO₄)₂ (III), whose crystal structures were determined. Crystals of I are monoclinic: a = 14.459(2) Å, b = 17.197(3) Å, c = 9.822(2) Å, β = 105.923(10)°, V = 3348.6(8) ų, space group P2(1)/c, Z = 4, R _hkl = 0.0419 for 6663 reflections. Complex I is a binuclear acetamidate with bridging (NHCOCH₃)^? ligands, one of which is bound to two Pt atoms through the N and O atoms, and the other ligand is bound only through the N atom. The Pt-Pt distance is 2.987(1) Å. Crystals of II are monoclinic: a = 10.213(7) Å, b = 13.373(9) Å, c = 16.533(11) Å, β = 97.971(9)°, V = 2236(3) ų, space group P2(1)/n, Z = 4, R _hkl = 0.557 for 6462 reflections. The Pt-Pt distance is 3.057(1) Å. Crystals of III are monoclinic: a = 10.557(12) Å, b = 18.531(2) Å, c = 14.4744(17) Å, β = 108.705(2)°, V = 2682(5) ų, space group P2(1)/n, Z = 4, R _hkl = 0.569 for 8506 reflections. The Pt-Pt distance is 3.202(1) Å. Complexes II and III are binuclear acetamidates, in which two chelating Pt(Tm) or Pt(N,N-DimeTm) moieties are coordinated through the N and O atoms of (NHCOCH₃)^? cis-bridges.     

Crystal Structure of <Emphasis Type="Italic">DL</Emphasis>-Valinium Tetrafluoroantimonate(III) Monohydrate

The crystal structure of an antimony(III) fluoride complex of the composition (C₅H₁₂NO₂)SbF₄·H₂O (I) involving a cation of α-amino isovaleric acid (DL-valine, Val) is determined. Crystals are monoclinic: a = 12.2024(2) Å, b = 6.1636(1) Å, c = 15.5167(3) Å, Z = 4, space group P2₁/c. The structure is formed of DL-valinium (C₅H₁₂NO₂)⁺ cations, complex [SbF₄]_n^n? anions having a polymeric chain structure, and crystallization water molecules. The [SbF₄]_n^n? complex anions consist of trigonal SbF4E bipyramids joined together by asymmetric bridging Sb–F(3)···Sb bonds. The structural units are organized into a threedimensional framework via N–H···F, N–H···O, and O–H···F hydrogen bonds.     

Mononuclear cobalt (III) complexes with <Emphasis Type="Italic">N</Emphasis>-salicylidene-2-hydroxy-5-bromobenzylamine and <Emphasis Type="Italic">N</Emphasis>-salicylidene-2-hydroxy-5-chlorobenzylamine

Cobalt (III) complexes with N-salicylidene-2-hydroxy-5-bromobenzylamine (H₂sbba) and N-salicylidene-2-hydroxy-5-chlorobenzylamine (H₂scba), [n-(C₄H₉)₄N][Co(sbba)₂] (I) and [n-(C₄H₉)₄N][Co(scba)₂] (II), were synthesized. The crystal structure of II was determined by the single-crystal X-ray diffraction method at 90 K confirming its crystallization in the monoclinic space group P2₁/n with a = 11.729(2) Å, b = 16.901(3) Å, c = 21.483(4) Å, β = 98.840(4)°, V = 4208.2(14) ų, D_x = 1.295 g cm^?3, and Z = 4. The R1 [I > 2σ(I)] and wR2 (all data) values of 0.0664 and 0.1920, respectively, for all 9521 independent reflections. The compound is composed of a tetra(n-butyl)ammonium cation and an octahedral cobalt(III) complex anion with two scba^2? ligands in a meridional fashion. The electronic spectral features of I and II are consistent with the octahedral cobalt(III) ion with an N₂O₄ donor set.     

Synthesis and X-ray study of 6<Emphasis Type="Italic">H</Emphasis>-chromeno[3,4-<Emphasis Type="Italic">e</Emphasis>][1,3,4]triazolo[2,3-<Emphasis Type="Italic">a</Emphasis>]pyrimidine

2-Dimethylamino methylenechromanone 1 reacted with 4H-1,2,4-triazol-3-amine in acetic acid to give only one isolated product which was identified by X-ray study as 6H-chromeno[3,4-e][1,3,4]triazolo[2,3-a]-pyrimidine. The molecular structure of 3, C₁₂H₈N₄O, was determined to be monoclinic, P2₁/c, a = 16.3875(5), b = 8.8378(3), c = 13.8392(5) Å, β = 101.190(1)°, V = 1966.22(11) ų, Z = 8.     

Secondary self-assembly behaviors of PEO-<Emphasis Type="Italic">b</Emphasis>-P<Emphasis Type="Italic">t</Emphasis>BA-<Emphasis Type="Italic">b</Emphasis>-PS triblock terpolymers in solution

A series of PEO₄₅-b-PtBA₅₃-b-PS _x (x = 42, 84, 165) triblock terpolymers were synthesized by the atom transfer radical polymerization and characterized by size exclusion chromatography and ¹H NMR. Their self-assemblies were conducted by a two-step hierarchical self-assembly method and a one-step dialysis method and the self-assembly behaviors were investigated. The morphologies, sizes, and size distributions of micelles produced by the self-assembly were determined by transmission electron microscopy and dynamic light scattering. The secondary self-assembled structure of PEO₄₅-b-PtBA₅₃-b-PS _x obtained by the two-step hierarchical self-assembly could be controlled by tuning the length of PS block, the core forming block. The micelles were uniform with diameters of 20–25 nm and their size distributions, except for that of PEO₄₅-b-PtBA₅₃-b-PS₁₆₅, were narrow with particle size distribution indexes ranging from 0.014 to 0.246. The one-step dialysis of the triblock terpolymers produced vesicular micelles with distinct vesicle walls that exhibited similar thicknesses. The vesicles did not show significant aggregation. The size distribution of PEO₄₅-b-PtBA₅₃-b-PS₄₂ vesicle was the narrowest with a particle size distribution index value of 0.135. The PEO₄₅-b-PtBA₅₃-b-PS₁₆₅ vesicles tended to overlap with each other.     

Solution Thermodynamics of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis><Superscript>/</Superscript>-Ethylenebis-(salicylideneiminato)-diaquochromium(III) Chloride in Aqueous Dimethylsulphoxide

The densities, viscosities and refractive indices of N,N ^/-ethylene-bis(salicylideneiminato)-diaquochromium(III) chloride, [Cr(salen)(H₂O)₂]Cl, in aqueous dimethylsulfoxide (DMSO) with different mass fractions (w ₂ = 0.20, 0.40, 0.60, 0.80 and 1.00) of DMSO were determined at 298.15, 308.15 and 318.15 K under atmospheric pressure. From measured densities, viscosities and refractive indices the apparent molar volumes (V _φ ), standard partial molar volume (V _φ ⁰ ), the slope (S _V ^* ), standard isobaric partial molar expansibility (φ _E ⁰ ) and its temperature dependence (?φ _E ⁰ /?T) _p , the viscosity B-coefficient, its temperature dependence (?B/?T), solvation number (S _n ) and apparent molar refractivity (R _D ^φ ), etc., were calculated and discussed on the basis of ion–ion and ion–solvent interactions. These results revealed that the solutions are characterized by ion–solvent interactions rather than by ion–ion interactions and the complex behaves as a long range structure maker. Thermodynamics of viscous flow was discussed in terms of transition state theory.     

Stability of <Emphasis Type="Italic">s</Emphasis>-, <Emphasis Type="Italic">p</Emphasis>-, and <Emphasis Type="Italic">d</Emphasis>-element diphosphates in water

The mean atomic Gibbs energies of formation of (Δ _f ? _at ⁰ ) of s-, p-, and d-element diphosphates have been calculated using ion increments of the Gibbs energy (Δ _f G ⁰). The diphosphate hydrolysis kinetics is considered, and a correlation between the Δ _f ? _at ⁰ values and the hydrolysis rate constants is presented.     

Crystal structures of <Emphasis Type="Italic">trans</Emphasis>-dichlorobis(ethylendiamine) rhodium(III) with univalent anions

The crystal structures of the compounds trans-[Rh(en)₂Cl₂]Cl₂ · H₅O₂ (I), trans-[Rh(en)₂Cl₂]ClO₄ (II), and trans-[Rh(en)₂Cl₂]ReO₄ (III) are determined. The crystal data are: I, a = 10.860(3) Å, b = 7.795(2) Å, c = 9.023(3) Å; β = 111.56(10)°, P2₁/c space group, Z = 4, d _x = 1.875 g/cm³; II, a = 6.593(2) Å, b = 8.309(3) Å, c = 11.922(4) Å, α = 83.55(10)°, β = 79.80(10)°, γ = 75.38(10)°, P \(\bar 1\) space group, Z = 2, d _x = 2.106 g/cm³; III, a = 6.533(2) Å, b = 16.391(4) Å, c = 12.411(3) Å; β = 98.30(10)°, P2₁/c space group, Z = 4, d _x = 2.749 g/cm³. The compounds are examined by IR spectroscopy and powder XRD. The solubility of the isolated crystalline phases in water decreases in the following order: trans-[Rh(en)₂Cl₂]Cl₂·H₅O₂ > trans-[Rh(en)₂Cl₂]ClO₄ > trans-[Rh(en)₂Cl₂]ReO₄.     

Reactions of arylsulfinyl chlorides and <Emphasis Type="Italic">N</Emphasis>-(arylsulfonyl)arylsulfinimidoyl chlorides with <Emphasis Type="Italic">p</Emphasis>-aminophenols

In reactions of arylsulfinyl chlorides and N-(arylsulfonyl)arylsulfinimidoyl chlorides with p-aminophenols formed N-arylthio-1,4-benzoquinone imines, evidently through a stage of N-arylsulfinyl-4-aminophenols and N-(N-arylsulfonyl)arylsulfinylimidoyl-4-aminophenols that under the reaction conditions eliminate respectively H₂O and ArSO₂NH₂.     

Syntheses,structures, and solid-state phosphorescence characteristics of <Emphasis Type="Italic">trans</Emphasis>-bis(salicylaldiminato)Pt(II) complexes bearing perpendicular <Emphasis Type="Italic">N</Emphasis>-aryl functionalities

The syntheses, structures, and solid-state emission characteristics of trans-bis(salicylaldiminato)Pt(II) complexes bearing N-aromatic functionalities are described herein. A series of Pt complexes bearing various N-phenyl (1) and N-(1-naphthyl) (2) groups on the salicylaldiminato ligands were prepared by reacting PtCl₂(CH₃CN)₂ with the corresponding N-salicylidene aromatic amines, and the trans-coordination and crystal packing of these complexes were unequivocally established based on X-ray diffraction (XRD). Complexes with 2,6-dimethylphenyl (1c), 2,6-diisopropylphenyl (1d), 1-naphthyl (2a), and 1-(2-methylnaphthyl) (2b) groups on the N atoms exhibited intense phosphorescent emission at ambient temperature in the crystalline state, while those with phenyl (1a), 2,6-dibromophenyl (1b), and 2,6-bis(N,N-dimethylamino)phenyl (1e) functionalities were either less emissive or non-emissive under the same conditions. XRD analyses identified significant intramolecular interactions between Pt and H atoms of the N-aryl functionalities in the emissive crystals of 1c, 1d, and 2a. These interactions were evidently an important factor associated with intense emission at ambient temperature.     

Reactions of <Emphasis Type="Italic">N</Emphasis>-acetyl- and <Emphasis Type="Italic">N</Emphasis>-ethoxycarbonyl-2-(1-cycloalken-1-yl)anilines with <Emphasis Type="Italic">meta</Emphasis>-cloroperbenzoic acid

Reaction of N-ethoxycarbonyl-2-(1-cycloalken-1-yl)anilines with meta-cloroperbenzoic acid leads to the corresponding 2-[1-o-(3-chlorobenzoyl)-2-hydroxycyclopent-1-yl]anilines. 5-(2-Acetylaminophenyl)-5-oxopentanic or 6-oxohexanic acids are formed as main products in the reaction of N-acetyl-2-(1-cycloalken-1-yl)anilines with m-chloroperbenzoic acid in CH₂Cl₂. N-Acetyl-2-(1-cyclopenten-1-yl)-3,6-dimethylaniline is an exception in this series since its reaction stops at the stage of epoxide formation.     

Crystal structures of <Emphasis Type="Italic">tris</Emphasis>-hexafluoro-acetylacetonates of aluminum and scandium

The structures of tris-hexafluoroacetylacetonates Al(hfa)₃ and Sc(hfa)₃·H₂O are determined by single crystal X-ray crystallography (Bruker-Nonius X8 Apex diffractometer, MoK _α radiation, T = 150(2) K). The Al(hfa)₃ complex is trigonal, a = 17.8944(11) Å, c = 12.4061(11) Å, P-3c1 space group, V = 3440.3(4) ų, Z = 6, R = 0.076. The Sc(hfa)₃·H₂O complex is monoclinic, a = 16.0926(4) Å, b = 14.7980(3) Å, c = 24.4020(5) Å, β = 125.641(1)°, P2₁/c space group, V = 4722.54(18) ų, Z = 8, R = 0.060. The structures of the complexes are formed by neutral molecules; the coordination environment of the metal atom involves six oxygen atoms of three β-diketone ligands (Al(hfa)₃) and, additionally, a water oxygen atom (Sc(hfa)₃·H₂O). The shortest Al...Al distance is 6.203(6) Å. The Sc(hfa)₃·H₂O molecules are joined in dimers by hydrogen bonds with Sc...Sc separations of 5.6992(8) Å and 5.6853(8) Å. In the crystals, the molecules are joined by van der Waals interactions, moreover, there are intermolecular contacts F...H ～ 2.5 Å in the structure of Sc(hfa)₃·H₂O.     

Synthesis of oxo derivatives of <Emphasis Type="Italic">N</Emphasis>-(<Emphasis Type="Italic">p</Emphasis>-tolysulfonyl)hexahydrocycloalka[<Emphasis Type="Italic">b</Emphasis>]indoles

Hydroxymercuration-demercuration of N-p-tolysulfonyl-4,4a,9,9a-tetrahydro-3H-carbazoles and N-p-tolyl(or methyl)sulfonyl-1,3a,4,8b-tetrahydrocyclopenta[b]indoles leads to the formation of the corresponding N-p-tolylsulfonyl-2,3,4,4a,9,9a-hexahydro-1H-carbazol-2-ols and N-p-tolyl(or methyl)sulfonyl-1,2,3,3a,4,8b-hexahydrocyclopenta[b]indol-2-ols. The latter are oxidized to 2-oxo derivatives with potassium dichromate. The oxidation of 2-methoxy-8-methyl-N-p-tolylsulfonyl-2,3,4,4a,9,9a-hexahydro-1H-carbazol-1-ol under analogous conditions gives 2-methoxy-8-methyl-N-p-tolysulfonyl-2,3,4,4a,9,9a-hexahydro-1H-carbazol-1-one.