Regioselective complexation of metal ion in chromogenic calix[4]biscrowns

A series of 1,3-alternate chromogenic azo-coupled calix[4]biscrowns in which the crown size varied with crown-5 and crown-6 have been synthesized. From the results of UV/vis band shift upon metal ion complexation, metal ions were entrapped only by the upper crown loop, causing the hypsochromic shift on the UV/vis spectra. Calix[4]bis(crown-5)(crown-6) revealed K(+) ion selectivity while calix[4]bis(crown-6)(crown-6) showed Cs(+) ion selectivity caused by a size complementarity between hosts and guest ions. From the UV band shift of 4 in which the NO(2) group is replaced by the NH(2) group, we observed bathochromic shift upon the metal ion addition, indicating that the metal ion is encapsulated in the lower crown ring because of strengthened pi-cation interaction by introducing the electron-donating NH(2) unit regardless of the steric hindrance between two azo-phenyl groups adjacent to the crown ring.     

Stilbene-bridged 1,3-alternate calix[4]arene crown ether for selective alkali ion extraction

A series of stilbene-bridged calix[4]arenes was synthesized through an intramolecular reductive McMurry coupling of bisbenzaldehyde calix[4]arene in high yields. Tetra- and pentaethylene glycol chains were tethered to the phenolic groups of calix[4]arene to form stilbene-bridged calix[4]arene crown-5 and crown-6, respectively. The presence of stilbene bridge over the calix[4]arene rim effectively prevented the connection of the polyether chains in the cone conformation resulting in the exclusive formation of 1,3-alternate stilbene-bridged calix[4]arene crown product. Compared to the cone analogues, the 1,3-alternate calix[4]arene crown ethers showed a greater extraction ability and selectivity toward Cs⁺.     

Silver ion shuttling in the trimer-mimic thiacalix[4]crown tube

Novel 1,3-alternate calix-thiacalix[4]crown trimers bearing crown-5 and crown-6 were prepared. As proven by X-ray diffraction, in a 1:2 mole ratio of ligand to metal ion, the Cs(+) and K(+) ions prefer to be encapsulated in the trimeric thiacalix[4]crown-6 and crown-5, respectively. On the contrary, the Ag(+) ion was found to be entrapped in the central thiacalix spacer as a 1:1 complex confirmed by (1)H NMR spectrosocpy. Variable-temperature (1)H NMR studies for the trimeric thiacalix[4]crown-6 encapsulating the silver ion revealed that the Ag(+) ion oscillates through the central thiacalix spacer with the aid of cation-pi interactions.     

1,3-Alternate and C-1,2-Alternate Tetrahomodioxacalix[4]crowns. Crystal Structures and Metal Ion Complexation

Two novel tetrahomodioxacalix[4]crowns with crown-5 and crown-6 rings weresynthesized. From X-ray crystal structures, homooxacalix[4]crown-5 (3) andhomooxacalix[4]crown-6 (2) were found to be in the 1,3-alternate and theC-1,2-alternate conformations, respectively. Homooxacalix[4]crown-5 (1)shows a marked selectivity for cesium ion over other metal ions tested.     

Potassium Sensing Calix[4]arene Crown Ethers

1,3-Alternate calix[4]arene crown-5 (1) and corresponding biscrown-5 (2) were synthesized and the complexation behavior with alkali metal ions examined. For both 1 and 2, potassium ion was selectively extracted from aqueous phase into organic phase over other alkali metal ions based on two phase extraction experiment. The complexation ratio between calix[4]arene biscrown-5 (2), in which two crown cavities connect to the calix[4]arene framework by 1,3-alternate fashion and potassium metal ion is found to 1:1 by proton NMR spectroscopy and extraction equilibria. Association constants (logK_a) for 1 and 2 were determined to give 2.51 and 3.49, respectively.     

Proton di-ionizable p-tert-butylcalix[4]arene-crown-6 compounds in cone, partial-cone and 1,3-alternate conformations: synthesis and alkaline earth metal cation extraction

Novel proton di-ionizable p-tert-butylcalix[4]arene-crown-6 compounds in cone, partial-cone and 1,3-alternate conformations are synthesized to compare the efficiency and selectivity with which they extract alkaline earth metal ions. In these ligands, a crown-6 polyether unit links alternate aromatic rings of the calix[4]arene framework. To the remaining lower-rim positions are attached oxyacetic acid or N-(X)sulfonyl oxyacetamide groups. Changing the conformation varies the spatial relationship between a polyether-complexed divalent metal ion and the ionized side arms of the ligands. This is found to markedly affect the efficiency and selectivity in competitive solvent extraction of alkaline earth metal ions from aqueous solutions into chloroform by the di-ionizable calix[4]arene-crown-6 ligands.     

Synthesis and conformational evaluation of p-tert-butylthiacalix[4]arene-crowns

Bridging of p-tert-butylthiacalix[4]arene afforded 1,3-dihydroxythiacalix[4]arene-monocrown-5 (3b), 1,2-alternate thiacalix[4]arene-biscrown-4 and -5 (4a,b), and 1,3-alternate thiacalix[4]arene-biscrown-5 and -6 (5a,b), depending on the metal carbonates and oligoethylene glycol ditosylates used. Starting from 1,3-dialkylated thiacalix[4]arenes, the corresponding bridging reaction gave 1,3-alternate, partial-cone, and cone conformers 10-19, depending on the substituents present. Temperature-dependent studies revealed that the conformationally flexible 1,3-dimethoxythiacalix[4]arene-crowns 10a-c exclusively occupy the 1,3-alternate conformation. Demethylation exclusively gave the cone 1,3-dihydroxythiacalix[4]arene-crowns (3a,c), which could not be obtained by direct bridging of thiacalix[4]arene. The different structures were assigned on the basis of several X-ray crystal structures and extensive 2-D (1)H NMR studies.     

A PCT-based, pyrene-armed calix[4]crown fluoroionophore

A photoinduced charge transfer (PCT)-based 1,3-alternate calix[4]crown fluoroionophore containing two cation recognition sites, a crown ether ring and two facing pyreneamide groups, is synthesized. Upon addition of K+, Pb2+, or Cu2+, wavelength changes are observed in both the fluorescence and absorption spectra, but with different binding modes. With K+, fluorescence emissions of the ligand scarcely change, while addition of Pb2+ or Cu2+ produces a remarkable change in both the excimer and monomer emissions. The observed data indicate that the metal cation is encapsulated in the crown-5 ring for K+ and by the two facing amide groups in the latter case, which is verified by a metal ion exchange experiment. The wavelength shifts in both fluorescence and absorption spectra upon addition of Cu2+ show that, in contrast to Pb2+, Cu2+ interacts with the nitrogen atoms of the amide groups, resulting in a PCT mechanism.     

Cesium Complex of an Unsymmetrical Calix[4]crown-dibenzocrown-6

An unsymmetrical calix[4]-bis-crown ether having both conventional crown-6 and dibenzocrown-6 rings in a fixed 1,3-alternate conformation was synthesized with good yield by the reaction of a monocyclic calix[4]crown-6 with dibenzodimesylate in the presence of cesium carbonate. The cesium ion selectivity among alkali metal ions increased compared to symmetrical calix[4]-bis-crown-6. The solid state structureof the ligand-cesium complex illustrates a 1:2 complex ratio. On the contrary, insolution, e.g., extraction equilibrium and ¹H NMR experiment gave a 1:1 complex ratio. From the result of the chemical shift change upon metal ion complex, the cesium ion seems to prefer the dibenzocrown loop to the conventional crown-6 ring.     

Synthesis and alkaline earth metal cation extraction by proton di-ionizable p-tert-butylcalix[4]arene-crown-5 compounds in cone, partial-cone and 1,3-alternate conformations

Synthetic strategies for novel, proton di-ionizable p-tert-butylcalix[4]arene-crown-5 compounds in cone, partial-cone and 1,3-alternate conformations are reported. Selective linkage of the two diametrical phenolic oxygens in p-tert-butylcalix[4]arene with tetraethylene glycol ditosylate gave 1,3-bridged p-tert-butylcalix[4]arene-crown-5. The two remaining phenolic units were alkylated using NaH and KH as the bases to give the cone and partial-cone conformers, respectively. Preparation of the 1,3-alternate conformers utilized a different sequence in which O-alkylation was followed by crown ether ring formation. Structures of these new ligands were elucidated by (1)H and (13)C NMR spectroscopy. These proton-ionizable ligands were tested for their solvent extraction properties toward alkaline earth metal cations. Surprising differences in their extraction behaviors are noted compared to those reported previously for di-ionizable p-tert-butylcalix[4]arenecrown-6 analogues.     

Synthesis of cone, partial-cone, and 1,3-alternate 25, 27-Bis

The preparation of 25,27-bis[1-(2-ethyl)hexyl]- and 25, 27-bis[1-(2-tert-butoxy)ethyl]calix[4]arene-crown-6 combining one polyether crown-6 and one alkylchain O-attached on each side of a calix[4]arene in the cone, partial-cone, and 1,3-alternate conformations are reported. The control over 25, 27-bisalkylcalix[4]arene-crown-6 conformation via varying specific reaction conditions was studied. The series of calix[4]arenes have been prepared by two routes, which differ in the order in which the alkyl or polyether groups were introduced. Moreover, methods have been developed to selectively prepare the cone and partial-cone conformers by using an appropriate base in the alkylation reactions. The conformations of these new derivatives have been probed by (1)H NMR analysis and X-ray crystallography. The (1)H and (13)C NMR spectra of 25,27-bis[1-(2-ethyl)hexyl]calix[4]arene-crown-6, 1, 3-alternate 1, cone 2, and partial-cone 3 are also discussed.     

Ratiometric detection of Hg2+ ions: an allosterically synchronized Hg2+/Li+ switch based on thiacalix[4]crown

A new heteroditopic chemosensor based on the 1,3-alternate conformation of thiacalix[4]crown shows a ratiometric fluorescence response towards Hg(2+) ions. Further, a negative allosteric behaviour between Hg(2+)/Li(+) ions is observed. Thus, metal ion exchange triggers a Hg(2+)/Li(+) switchable fluorescent chemosensor.     

Electrochemical investigation of nano-baskets of calix[4]-1,3-crowns-5,6 complexes

Four nano-baskets of calixarene including cone 25,27-di(carboxymethoxy)calix[4]arene-crown-5, 1,3-alternate 25,27-di[carboxymethoxy]-calix[4]arene-crown-5, cone 25,27-bis[carboxymethoxy]calix[4]arene-crown-6 and 1,3-alternate 25,27-di[carboxymethoxy]-calix[4]arene-crown-6 were synthesized and their binding abilities towards alkali and alkaline earth metals as well as some lanthanides were studied using differential pulse voltammetry. The novelty of this study was investigation of those macrocyclic complexes by voltammetric behaviors of two acidic moieties in each scaffold during complexation of crown ether ring. Their voltammetric behaviors were closely related to the complex formation by entrapment of cation into crown ether cavity and ion–dipole interaction between cation and acidic moieties in calixcrowns. The results revealed the selective changes in voltammetric behavior of synthesized scaffolds toward the cations. Moreover, the position of crown ether in 1,3-alternate instead of cone enhanced the domain of binding ability to more cations. Furthermore, it was shown that those carboxylic acid moieties, which were far from the crown ether ring in the 1,3-alternate, did not affected by encapsulated cations in the coordination space of crown ether and showed no voltammetric behavior.     

Syntheses and conformations of tetrahomodioxacalix[4]arene tetraamides and tetrathioamides

A series of tetrahomodioxacalix[4]arene tetraamides and tetrathioamides with four p-phenyl groups on their upper rim were synthesized. From the (1)H and (13)C NMR and crystal structure, N-butylamido homooxacalix[4]arene (4) was found to be in the 1,3-alternate conformation and has intramolecular hydrogen bonding between N-H and facing oxygen atoms of the carbonyl O=C group. This hydrogen bonding decreased the metal ion complex ability. Transformation of the 1,3-alternate N-butylamido (4) into N-butylthioamido homooxacalix[4]arene (5) using Lawesson's reagent gave a conformational change to the C-1,2-alternate.     

Selective complexation of alkali metal ions using crown ethers derived from calix[4]arenes: a computational investigation of the structural and energetic factors

A systematic analysis of the structural, energetic, and thermodynamic factors involved in alkali metal (i.e., Na⁺, K⁺, Rb⁺, and Cs⁺) complexation by four calix[4]arene crown-6 ethers in the 1,3-alternate conformation is presented here. The ligands (or hosts) in this work are identical to, or closely related to, the four molecules whose selectivity towards complexing Na⁺, K⁺, Rb⁺, and Cs⁺ from aqueous solutions was studied experimentally by Casnati et al. (Tetrahedron 60(36):7869–7876, 2004). By dividing the complexation process into three different contributions, namely, the binding energy of the ion to the crown, the elastic energy of the crown, and the solvation effect, it becomes clear that the primary factor that determines ion selectivity in crown-6-ethers is not the size of the crown, as currently believed. All four crown ethers preferentially complex with the smallest ion (Na⁺) in the gas phase. In the condensed phase, these crown-6 ethers preferentially complex with the larger ions only because the aqueous solvation energies of the alkali metal ions make it thermodynamically less favorable to extract the smaller ions from aqueous solutions. This suggests that the current understanding of the factors influencing the selectivity of metal ion complexation by crown ethers may be in need of revision.     

Exchange coupling mediated through-bonds and through-space in conformationally constrained polyradical scaffolds: calix[4]arene nitroxide tetraradicals and diradical

Calix[4]arenes constrained to the 1,3-alternate conformation and functionalized at the upper rim with four and two tert-butylnitroxides have been synthesized and characterized by X-ray crystallography, magnetic resonance (EPR and (1)H NMR) spectroscopy, and magnetic studies. The 1,3-alternate nitroxide tetraradical and diradical provide unique polyradical scaffolds for dissection of the through-bond and through-space intramolecular exchange couplings. In addition, detailed magnetic studies of the previously reported calix[4]arene nitroxide tetraradical, which possesses cone conformation in solution, reveal conformational dependence of exchange coupling. Through-bond coupling between the adjacent nitroxide radicals is mediated by the nitroxide-m-phenylene-CH(2)-m-phenylene-nitroxide coupling pathway, and through-space coupling is found between the diagonal nitroxide radicals at the conformationally constrained N...N distance of 5-6 A. Magnetic studies of the calix[4]arene polyradical scaffolds in frozen solutions show that the through-bond exchange coupling in the 1,3-alternate calix[4]arene tetraradical is antiferromagnetic, while that in cone calix[4]arene tetraradical is ferromagnetic. The through-space exchange couplings are antiferromagnetic in both cone and 1,3-alternate calix[4]arene tetraradical, as well as in the 1,3-alternate calix[4]arene diradical. The exchange coupling constants (|J/k|) are of the order of 1 K.     

Novel fluorogenic calix[4]arene-bis(crown-6-ether) for selective recognition of thallium(I)

A new fluorogenic, dansyl group-containing derivative of 1,3-alternate calix[4]arene-bis(crown-6-ether) provides optical recognition of Tl+ with selectivity over many other metal cations, including Na+, K+, Ca2+, Ag+, Hg2+ and Pb2+, and embodies the first example of a calixarene-based fluorescent Tl+-chemosensor.     

Supramolecular cation assemblies of hydrogen-bonded (NH4+/NH2NH3+)(crown ether) in [Ni(dmit)2]-based molecular conductors and magnets

Hydrogen-bonded supramolecular cation assemblies of (NH4+/NH2-NH3+)(crown ether), where the crown ether is [12]crown-4, [15]crown-5, or [18]crown-6, were incorporated into electrically conducting [Ni(dmit)2] salts (dmit2- = 2-thioxo-1,3-dithiole-4,5-dithiolate). (NH4+)([12]crown-4)[Ni(dmit)2]3(CH3CN)2 had a pyramidal shape, while ionic channels were observed in (NH4+)(0.88)([15]crown-5)[Ni(dmit)(2)]2 and (NH4+)(0.70)([18]crown-6)[Ni(dmit)(2)]2. Both (NH4+)(0.88)([15]crown-5) and (NH4+)(0.70)([18]crown-6) contained regularly spaced [Ni(dmit)(2)] stacks formed by N-H.O hydrogen bonding between the oxygen atoms in crown ethers and the NH4+ ion. NH4+ occurred nonstoichiometrically; there were vacant ionic sites in the ionic channels. The ionic radius of NH4+ is larger than the cavity radius of [15]crown-5 and [18]crown-6. Therefore, NH4+ ions could not pass through the cavity and were distributed randomly in the ionic channels. The static disorder caused the conduction electrons to be randomly localized to the [Ni(dmit)2] stacks. Hydrazinium (NH2-NH3+) formed the supramolecular cations in (NH2-NH3+)([12]crown-4)2[Ni(dmit)2]4 and (NH2-NH3+)2([15]crown-5)3[Ni(dmit)2]6, possessing a sandwich and club-sandwich structure, respectively. To the best of our knowledge, these represent the first hydrazinium-crown ether assemblies to be identified in the solid. In the supramolecular cations, hydrogen bonding was detected between the ammonium or the amino protons of NH2-NH3+ and the oxygen atoms of crown ethers. The sandwich-type cations coexisted with the [Ni(dmit)2] dimer stacks. Although the assemblies were typically semiconducting, ferromagnetic interaction (Weiss temperature = +1 K) was detected in the case of (NH2-NH3+)2([15]crown-5)3[Ni(dmit)2]6. The (NH2-NH3+)0.8([18]crown-6)[Ni(dmit)2]2 and (NH4+)0.76([18]crown-6)[Ni(dmit)2]2 crystals were isomorphous. The large and flexible [18]crown-6 allowed for maintaining the same ionic channel structure through replacement of the NH4+ cation by NH2-NH3+.     

Synthesis of an unsymmetrically doubly bridged calix[4]arene in the 1,3-alternate conformation

We report the synthesis of the first calix[4]arene constrained to a 1,3-alternate conformation by one crown ether and one di-aza-benzo crown ether bridgings. Preliminary binding properties are also given.     

Di-ionizable calix[4]arene-1,3-crown-4 ligands in 1,3-alternate,cone, and partial-cone conformations: synthesis and metal ion extractions

Di-ionizable calix[4]arene-1,3-crown-4 compounds locked in 1,3-alternate, cone, and partial-cone conformations are synthesized for evaluation in metal ion separations. The ionizable functions include carboxylic acid and N-(X)sulfonyl carboxamide groups in which the acidity is tuned by variation of the electron-withdrawing ability of X. Similar synthetic routes were employed for preparation of the cone and 1,3-alternate ligand series. A different preparative route utilizing protection and deprotection was required to obtain the partial-cone analogues. Ligand conformations were confirmed by their proton and/or carbon NMR spectra. X-ray diffraction verified an unusual 1,2-alternate conformation in the solid-state for one synthetic intermediate. Effects of ligand conformation and ionizable group variations on competitive solvent extractions of alkali and alkaline earth metal cations from aqueous solutions into chloroform were assessed. Single species solvent extractions of Hg²⁺ and Pb²⁺ were also performed.