Preparation of the visible light responsive TiO2 thin film photocatalysts by the RF magnetron sputtering deposition method

TiO₂ thin film photocatalysts which could induce photoreactions under visible light irradiation were successfully developed in a single process by applying an ion engineering technique, i.e., the radio frequency (RF) magnetron sputtering deposition method. The TiO₂ thin films prepared at temperatures greater than 773 K showed the efficient absorption of visible light; on the other hand, the TiO₂ thin films prepared at around 573 K were highly transparent. This clearly means that the optical properties of TiO₂ thin films, which absorb not only UV but also visible light, can be controlled by the preparation temperatures of the RF magnetron sputtering deposition method. These visible light responsive TiO₂ thin films were found to exhibit effective photocatalytic reactivity under visible light irradiation (λ > 450 nm) at 275 K for the reductive decomposition of NO into N₂ and N₂O. From various characterizations, the orderly aligned columnar TiO₂ crystals could be observed only for the visible light responsive TiO₂ thin films. This unique structural factor is expected to modify the electronic properties of a TiO₂ semiconductor, enabling the efficient absorption of visible light.     

Mesoporous TiO2−xAy (A = N,S) as a visible-light-response photocatalyst

Mesoporous TiO_2?xA_y (A = N, S) thin films were fabricated using thiourea as a doping resource by a combination of sol-gel and evaporation-induced self-assembly (EISA) processes. The results showed that thiourea could serve two functions of co-doping nitrogen and sulfur and changing the mesoporous structure of TiO₂ thin films. The resultant mesoporous TiO_2?xA_y (A = N, S) exhibited anatase framework with a high porosity and a narrow pore distribution. The formation of the O–Ti–N and O–Ti–S bonds in the mesoporous TiO_2?xA_y (A = N, S) were substantiated by the XPS spectra. A new bandgap in visible light region (520 nm) corresponding to 2.38 eV could be formed by the co-doping. After being illuminated for 3 h, methyl orange could be degraded nearly completely by the co-doped sample under both ultraviolet irradiation and visible light illumination. While pure mesoporous TiO₂ could only degrade 60% methyl orange under UV illumination and showed negligible photodegradation capability in the visible light range. Furthermore, the photo-induced hydrophilic activity of TiO₂ film was improved by the co-doping. The mesoporous microstructure and high visible light absorption could be attributed to their good photocatalytic acitivity and hydrophilicity.     

TiO2 nanoparticles synthesized in an aprotic solvent and applied to prepare high-refractive-index TiO2-polyimide hybrid thin films

In this study, very small (2–5 nm) TiO₂ nanoparticles were synthesized in an aprotic solvent, N,N-dimethylacetamide, via hydrolysis and condensation of titanium alkoxide at room temperature. The synthesized TiO₂ sol showed 30 days of storage stability and could be used to prepare high-refractive-index TiO₂-polyimide hybrid thin films by an ex-situ method that involved a spin coating and multistep baking process. The field emission scanning electron microscope image showed a flat and uniform morphology of the hybrid thin film. TiO₂ domains were in the nanometer range, thus avoiding light scattering. The refractive index at 633 nm of the hybrid thin film reached 2.05, which suggested potential applications of the film to anti-reflective coatings and optical waveguides.     

Enhanced Visible‐Light‐Induced Photoelectrocatalytic Degradation of Methyl Orange by CdS Sensitized TiO2 Nanotube Arrays Electrode

In this work, CdS sensitized TiO₂ nanotube arrays (CdS/TiO₂NTs) electrode was synthesized with the CdS deposition on the highly ordered titanium dioxide nanotube arrays (TiO₂NTs) by sequential chemical bath deposition method (S‐CBD). The as‐prepared CdS/TiO₂NTs was characterized by field‐emission scanning electron microscopy (FE‐SEM) and X‐ray diffraction (XRD). The results indicated that the CdS nanoparticles were effectively deposited on the surface of TiO₂NTs. The amperometric I‐t curve on the CdS/TiO₂NTs electrode was also presented. It was found that the photocurrent density was enhanced significantly from 0.5 to 1.85 mA/cm² upon illumination with applied potential of 0.5 V at the central wavelength of 253.7 nm. The photoelectrocatalytic (PEC) activity of the CdS/TiO₂NTs electrode was investigated by degradation of methyl orange (MO) in aqueous solution. Compared with TiO₂NTs electrode, the degradation efficiencies of CdS/TiO₂NTs electrode increased from 78% to 99.2% under UV light in 2 h, and from 14% to 99.2% under visible light in 3 h, which was caused by effective separation of the electrons and holes due to the effect of CdS, hence inhibiting the recombination of electron/hole pairs of TiO₂NTs.     

Formation of crystalline TiO2−xNx and its photocatalytic activity

Amorphous precursors to nitrogen-doped TiO₂ (NTP) and pure TiO₂ (ATP) powders were synthesized by hydrolytic synthesis and sol-gel method (SGM), respectively. Corresponding crystalline phases were obtained by thermally induced transformation of these amorphous powders. From FT-IR and XPS data, it was concluded that a complex containing titanium and ammonia was formed in the precipitate stage while calcination drove weakly adsorbed ammonium species off the surface, decomposed ammonia bound on surface of precipitated powder and led to substitution of nitrogen atom into the lattice of TiO₂ during the crystallization. The activation energies required for grain growth in amorphous TiO_2−xN_x and TiO₂ samples were determined to be 1.6 and 1.7 kJ/mol, respectively. Those required for the phase transformation from amorphous to crystalline TiO_2−xN_x and TiO₂ were determined to be 129 and 142 kJ/mol, respectively. A relatively low temperature was required for the phase transformation in NTP sample than in ATP sample. The fabricated N-doped TiO₂ photocatalyst absorbed the visible light showing two absorption edges; one in UV range due to titanium oxide as the main edge and the other due to nitrogen doping as a small shoulder. TiO_2−xN_x photocatalyst demonstrated its photoactivity for photocurrent generation and decomposition of 2-propanol (IPA) under visible light irradiation ().     

Photo(UV)-enhanced performance of Pt–TiO2 nanostructure electrode for methanol oxidation

We report an improved performance of Pt–TiO₂ nanostructure electrode for methanol oxidation in methanol fuel cells. The nanostructure electrode consisting of Pt nanophases and a titanium oxide matrix was fabricated by means of co-sputtering deposition method. The electrode showed a remarkably enhanced performance for methanol oxidation under UV illumination compared to that without UV illumination. Such a remarkably improved performance of the Pt–TiO₂ electrode might be due to the enhanced methanol oxidation by photo-generated holes in the TiO₂ under UV illumination.     

A novel approach for the synthesis of visible-light-active nanocrystalline N-doped TiO2 photocatalytic hydrosol

A visible-light-active nitrogen doped nanocrystalline titanium dioxide (N–TiO₂) hydrosol was prepared by precipitation–peptization method and following with hydrothermal crystallization at 110 °C holding for 6 h. XPS results show that nitrogen ions have been doped into the TiO₂ lattice successfully and the UV–Vis absorption spectra indicate that the light absorption edge of the N-doped TiO₂ has been red-shifted into visible light region. The photocatalytic performance of the N-doped TiO₂ thin film prepared from the synthesized hydrosol was evaluated by photodegrading the gaseous formaldehyde (HCHO) under visible light irradiation. The photodegradation ratio of HCHO reached up to 90% within 24 h and the degradation ratio was stable for ten degradation cycles, indicating the prepared hydrosol has good reusable performance in photodegrading gaseous pollutants.     

Cr掺杂金红石相TiO2(110)单晶薄膜的制备、表征及光催化活性

采用脉冲激光沉积术(PLD)同质外延生长了表面原子级平整的6%(原子比)Cr 掺杂的金红石相TiO₂(110)单晶薄膜, 采用扫描隧道显微镜(STM)、扫描隧道谱(STS)、X 射线光电子能谱(XPS)和紫外光电子能谱(UPS)对其进行了表征. 结果表明: Cr 掺杂对TiO₂(110)-(1×1)表面的形貌没有明显影响, 但是提高了掺杂薄膜在负偏压的导电性; Cr与晶格O键合而呈现+3价态, 由此在TiO₂的价带顶上方~0.4 eV处引入杂质能级. 紫外-可见光吸收谱显示薄膜的光吸收能力被扩展到~650 nm, 处于可见光范围. 借助STM以单个甲醇分子的光解反应检测了薄膜的光催化活性. 仅观察到紫外光照射下甲醇分子的脱氢反应, 在可见光照射下(λ>430 nm)甲醇分子没有发生反应, 表明单独的Cr掺杂可能不足以提高TiO₂在可见光下的催化活性.     

Ion engineering techniques for the preparation of the highly effective TiO<Subscript>2</Subscript> photocatalysts operating under visible light irradiation

The successful application of ion engineering techniques for the development of TiO₂ photocatalysts operating under visible and/or solar light irradiations has been summarized in this review article. First, we have physically doped various transition metal ions within a TiO₂ lattice on an atomic level by using an advanced metal ion implantation method. The metal ion implanted TiO₂ could efficiently work as a photocatalyst under visible light irradiation. Some field tests under solar light irradiation clearly revealed that the Cr or V ions implanted TiO₂ samples showed 2–3 times higher photocatalytic reactivity than the un-implanted TiO₂. Second, we have developed the visible light responsive TiO₂ thin film photocatalyst by a single process using an RF-magnetron sputtering (RF-MS) deposition method. The vis-type TiO₂ thin films showed high photocatalytic reactivity for various reactions such as reduction of NOx, degradation of organic compounds, and splitting of H₂O under visible and/or solar light irradiations.     

Metal–metal charge transfer and interfacial charge transfer mechanism for the visible light photocatalytic activity of cerium and nitrogen co-doped TiO2

Nanosized cerium and nitrogen co-doped TiO₂ (Ce–TiO_2?xN_x) was synthesized by sol gel method and characterized by powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy (XPS), FESEM, Fourier transform infrared, N₂ adsorption and desorption methods, photoluminescence and ultraviolet–visible (UV–vis) DRS techniques. PXRD analysis shows the dopant decreases the crystallite sizes and slows the crystallization of the titania matrix. XPS confirm the existence of cerium ion in +3 or +4 state, and nitrogen in ?3 state in Ce–TiO_2?xN_x. The modified surface of TiO₂ provides highly active sites for the dyes at the periphery of the Ce–O–Ti interface and also inhibits Ce particles from sintering. UV–visible DRS studies show that the metal–metal charge transfer (MMCT) of Ti/Ce assembly (Ti⁴⁺/Ce³⁺ → Ti³⁺/Ce⁴⁺) is responsible for the visible light photocatalytic activity. Photoluminescence was used to determine the effect of cerium ion on the electron–hole pair separation between the two interfaces Ce–TiO_2?xN_x and Ce₂O₃. This separation increases with the increase of cerium and nitrogen ion concentrations of doped samples. The degradation kinetics of methylene blue and methyl violet dyes in the presence of sol gel TiO₂, Ce–TiO_2?xN_x and commercial Degussa P25 was determined. The higher visible light activity of Ce–TiO_2?xN_x was due to the participation of MMCT and interfacial charge transfer mechanism.     

In situ spectroelectrochemical behaviour of nanocrystalline TiO2 thin films electrode fabricated by pulsed laser deposition

Nanocrystalline titanium oxide thin films have been successfully deposited on IT0 coated glass by pulsed laser ablation of metallic Ti target in 0₃/0₂ ambient gases. The intercalation of Li ions in the anatase TiO₂ film electrode is examined by cyclic voltammetry. The electrochromic behaviour of TiO₂ electrode is investigated byin-situ visible transmittance measurement, and two absorption bands at 420 and 650 nm are observed. The absorption falling and rising in color changing with excellent revisibility is relative to the insertion and deintercalation processes of Li ion. These results suggest that nanocrystalline titanium oxide films fabricated by pulsed laser deposition exhibit excellent spectroelectrochemical property. Project supported by the National Natural Science Foundation of China (Grant No. 29783001) and State Key Laboratory for Physical Chemistry of Solid Surface of Xiamen University (1997).     

Preparation of tantalum oxynitride thin film photocatalysts by reactive magnetron sputtering deposition under high substrate temperature

This work spotlights the formation behavior of visible light-responsive tantalum oxynitride (TaON) thin film photocatalysts under high substrate temperature in radiofrequency reactive magnetron sputtering deposition. The results emanating from the optimization of the sputtering conditions demonstrated that sputtered N atoms with high kinetic energy generated by controlling target–substrate distances and total pressures in the sputtering chamber were necessary to grow TaON phase even under N₂-rich atmosphere. Based on these findings, TaON thin film photocatalysts were successfully synthesized by single-step sputtering under a high substrate temperature of 1073 K before heat treatment. The optimal thickness of TaON thin film photocatalysts was extrapolated to be 450 nm by photoelectrochemical measurements under visible light irradiation (λ > 450 nm), in which distinct photocurrents corresponding to water oxidation were observed. Moreover, the photoelectrochemical activity was able to be improved by postsynthetic heat treatment in gaseous NH₃ and loading with IrO₂ nanocolloids as cocatalysts. This finding would be because the thin film photocatalyst after heat treatment in NH₃ under appropriate conditions possessed better crystallinity and moderate donor density. The optimized TaON thin film photocatalysts with IrO₂ nanocolloids also exhibited photocatalytic activity for H₂ evolution from aqueous medium containing methanol as a sacrificial electron donor under visible light irradiation (λ > 450 nm).     

Preparation and Characterization of Bismuth Doped TiO2 Thin Films

A series of Bismuth-doped titanium oxide (Bi-doped TiO₂) thin films on glass substrates have been prepared by sol-gel dip coating process. The prepared catalysts were characterized by XRD and XPS. The photocatlytic activity of the thin film catalysts was evaluated through the photodegradation of aqueous methyl orange under UV illumination. The experiments demonstrated that the Bi-doped TiO₂ prepared was anatase phase. The doped bismuth was in the 3⁺ oxidation state. The presence of Bi significantly enhanced the photocatalytic activity of TiO₂ films. At calcination temperature of 500°C, with doping concentration of 2 wt %, Bi-doped TiO₂ thin film showed the highest photocatalyic activity.     

Photocatalytic activity of nitrogen and copper doped TiO2 nanoparticles prepared by microwave-assisted sol-gel process

Cu and N-doped TiO₂ photocatalysts were synthesized from titanium (IV) isopropoxide via a microwave-assisted sol-gel method. The synthesized materials were characterized by X-ray diffraction, UV-vis diffuse reflectance, photoluminescence (PL) spectroscopy, SEM, TEM, FT-IR, Raman spectroscopy, photocurrent measurement technique, and nitrogen adsorption–desorption isotherms. Raman spectra and XRD showed an anatase phase structure. The SEM and TEM images revealed the formation of an almost spheroid mono disperse TiO₂ with particle sizes in the range of 9-17 nm. Analysis of N₂ isotherm measurements showed that all investigated TiO₂ samples have mesoporous structures with high surface areas. The optical absorption edge for the doped TiO₂ was significantly shifted to the visible light region. The photocurrent and photocatalytic activity of pure and doped TiO₂ were evaluated with the degradation of methyl orange (MO) and methylene blue (MB) solution under both UV and visible light illumination. The doped TiO₂ nanoparticles exhibit higher catalytic activity under each of visible light and UV irradiation in contrast to pure TiO₂. The photocatalytic activity and photocurrent ability of TiO₂ have been enhanced by doping of the titania in the following order: (Cu, N) - codoped TiO₂ > N-doped TiO₂ > Cu-doped TiO₂ > TiO₂. COD result for (Cu, N)-codoped TiO₂ reveals ∼92% mineralization of the MO dye on six h of visible light irradiation.     

New synthesis of excellent visible-light TiO2−xNx photocatalyst using a very simple method

An excellent visible-light-responsive (from 400 to 550 nm) TiO_2−xN_x photocatalyst was prepared by a simple wet method. Hydrazine was used as a new nitrogen resource in this paper. Self-made amorphous titanium dioxide precursor powders were dipped into hydrazine hydrate, and calcined at low temperature (110 °C) in the air. The TiO_2−xN_x was successfully synthesized, following by spontaneous combustion. The photocatalyst was characterized by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), transmission electron microscope (TEM), UV-Vis diffuse reflectance spectrometer (DRS), and X-ray photoelectron spectroscopy (XPS). Analysis of XPS indicated that N atoms were incorporated into the lattice of the titania crystal during the combustion of hydrazine on the surface of TiO₂. Ethylene was selected as a target pollutant under visible-light excitation to evaluate the activity of this photocatalyst. The newly prepared TiO_2−xN_x photocatalyst with strong photocatalytic activity and high photochemical stability under visible-light irradiation was firstly demonstrated in the experiment.     

三维有序结构In掺杂TiO_2薄膜的可见光催化活性

采用自组装生长聚苯乙烯胶体模板和溶胶-凝胶法,制备出三维(3D)有序结构In掺杂TiO2(IO-TiO2-In)薄膜可见光催化剂.光催化实验证明,IO-TiO2-In薄膜降解甲醛的可见光活性是TiO2和三维有序结构TiO2(IOTiO2)薄膜的5倍.利用X射线电子衍射(XRD)谱、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)和紫外-可见(UV-Vis)漫反射吸收光谱确定了催化剂的晶相结构、表面微结构和能带结构.结果表明,IO-TiO2-In薄膜具有锐钛矿型三维有序结构,与TiO2相比,增加了比表面积,提高光的利用率;掺入的In离子在薄膜表面形成In2O3和O-In-Clx(x=1,2)物种,既增强可见光的吸收,又有效地促进了光生载流子的分离,提高了光生载流子在固/气界面参加光催化反应的利用率,使催化剂的可见光催化活性显著提高.     

部分还原氧化石墨烯/二氧化钛复合材料的水热合成及其光催化活性

采用水热法以Hummers氧化法制备的氧化石墨和钛酸四丁酯为原料制备了部分还原的氧化石墨烯/二氧化钛(RGO/TiO₂)复合光催化剂, 并研究了该复合材料在可见光以及紫外光下对亚甲基蓝的光催化降解活性.结果表明, 通过改变反应温度和氧化石墨加入量可以调控TiO₂的晶相组成及其在复合材料中的分散性; 在水热反应过程中氧化石墨烯发生了部分还原; 所制备的RGO/TiO₂复合材料的可见光和紫外光催化活性均高于纯TiO₂; 部分还原的氧化石墨烯在复合材料中担当载体和电子受体, 同时可以使TiO₂的初始吸收边向可见光区域红移, 增强了TiO₂在可见光区域的吸收, 能有效提高对目标污染物的吸附性和光催化降解活性.     

Fabrication of highly efficient dye-sensitized solar cell and CO2 reduction photocatalyst using TiO2 nanoparticles prepared by spin coating-assisted sol–gel method

A sol?Cgel method was applied for fabrication of nanocrystalline anatase TiO₂ thin films on ITO glass substrates and followed by rapid thermal annealing for application as the work electrode for dye-sensitized solar cells (DSSC). TiO₂ nanoparticles were characterized by X-ray diffraction (XRD) pattern and scanning electron microscopy (SEM) and the absorption of dye on the TiO₂ electrode was shown by UV?Cvis spectroscopy. By controlling different parameters including numbers of coated layers, the gap between two electrodes, sensitization time, and light source power, TiO₂-based solar cells with high efficiency was achieved. The results show that a five time spin-coated TiO₂ electrode with applying sealant and sensitization time of 24?h in N3 dye under illumination of 100?W?cm^?2 tungsten lamp give the optimum power conversion efficiency (??) of 6.61%. The increases in thickness of TiO₂ films by increasing the numbers of coated layers can improve adsorption of the N3 dye through TiO₂ layers to increase the open-circuit voltage (V _oc). However, short-circuit photocurrents (J _sc) of DSSCs with a one-coated layer of TiO₂ films are smaller than those of DSSCs with five-coated layer of TiO₂ films. It could be due to the fact that the increased thickness of TiO₂ thin films also resulted in a decrease in the transmittance of TiO₂ thin films. Also, this electrode was employed to photoreduce CO₂ with H₂O under tungsten lamp as light source.     

Effect of Pt loading on the photocatalytic reactivity of titanium oxide thin films prepared by ion engineering techniques

Platinum-loaded titanium oxide thin-film photocatalysts were prepared by using an ionized cluster beam (ICB) deposition method and a RF magnetron sputtering (RF-MS) deposition method as dry processes. From the results of the photocatalytic oxidation of acetaldehyde with O₂ under UV light irradiation, small amounts of Pt loading (less than 10 nm film thickness) were found to dramatically enhance the photocatalytic reactivity. However, when TiO₂ thin films were loaded with relatively larger amounts of Pt (more than 30 nm as the film thickness), the photocatalytic reactivity became lower than for the pure TiO₂ thin films. Moreover, investigations of the ratio of Pt loaded onto the surface of the thin film catalysts by XPS measurements revealed that the small amounts of Pt loaded exist as very small clusters working to efficiently enhance the charge separation, whereas, large amounts of Pt covers the entire surface of the TiO₂ thin films, resulting in a decrease of the photocatalytic reactivity.