Rotational diffusion of organic solutes in surfactant-block copolymer micelles: role of electrostatic interactions and micellar hydration

Rotational diffusion of a cationic solute rhodamine 110 and a neutral solute 2,5-dimethyl-1,4-dioxo-3,6-diphenylpyrrolo[3,4-c]pyrrole, DMDPP has been examined in the surfactant-block copolymer system of sodium dodecyl sulfate (SDS) and poly(ethylene oxide)20-poly(propylene oxide)70-poly(ethylene oxide)20 (P123). In this study, the mole ratio of SDS to P123 was varied from 0 to 5 in steps of one unit, to investigate the role of electrostatic interactions and micellar hydration on solute rotation. It has been noticed that there is a significant enhancement in the average reorientation time of rhodamine 110, when [SDS]/[P123] increased from 0 to 1. This has been rationalized on the basis of migration of rhodamine 110 from the interfacial region of P123 micelles to the palisade layer (corona region) due to the electrostatic interaction with negatively charged head groups of SDS, whose tails are embedded in the polypropylene oxide core. Further increase in the mole ratio of SDS to P123 has resulted in only a marginal decrease in the average reorientation time of rhodamine 110, which is probably due to the solute molecule experiencing a microenvironment similar to the interfacial region of SDS micelles. In contrast, a gradual decrease has been observed in the average reorientation time of DMDPP with [SDS]/[P123], which is due to the increase in hydration levels in the palisade layer (corona region) of the micelle. These explanations are consistent with the structure of the SDS-P123 micellar system that has been deduced from neutron scattering and viscosity measurements recently.     

Effect of electrostatic interaction on the location of molecular probe in polymer-surfactant supramolecular assembly: a solvent relaxation study

Effect of electrostatic interaction on the location of a solubilized molecular probe with ionic character in a supramolecular assembly composed of a triblock copolymer, P123 ((ethylene oxide) 20-(propylene oxide) 70-(ethylene oxide) 20) and a cosurfactant cetyltrimethylammonium chloride (CTAC) in aqueous medium has been studied using steady-state and time-resolved fluorescence measurements. Coumarin-343 dye in its anionic form has been used as the molecular probe. In the absence of the surfactant, CTAC, the probe C343 prefers to reside at the surface region of the P123 micelle, showing a relatively less dynamic Stokes' shift, as a large part of the Stokes' shift is missed in the present measurements due to faster solvent relaxation at micellar surface region. As the concentration of CTAC is increased in the solution, the percentage of the total dynamic Stokes' shift observed from time-resolved measurements gradually increases until it reaches a saturation value. Observed results have been rationalized on the basis of the mixed micellar structure of the supramolecular assembly, where the hydrocarbon chain of the CTAC surfactant dissolves into the nonpolar poly(propylene oxide) (PPO) core of the P123 micelle and the positively charged headgroup of CTAC resides at the interfacial region between the central PPO core and the surrounding hydrated poly(ethylene oxide) (PEO) shell or the corona region. The electrostatic attraction between the anionic probe molecule and the positively charged surface of the PPO core developed by the presence of CTAC results in a gradual shift of the probe in the deeper region of the micellar corona region with an increase in the CTAC concentration, as clearly manifested from the solvation dynamics results.     

Salt‐Induced Micellization of Pluronic F88 in Water

The effect of potassium chloride on the micellization of a poly(ethylene oxide)‐poly(propylene oxide)‐poly(ethylene oxide) (PEO‐PPO‐PEO) triblock copolymer (Pluronic F88: EO₁₀₃PO₃₉EO₁₀₃.) in water was studied by fluorescence, FTIR, ¹H NMR, dynamic light scattering, and dye solubilization. The critical micellization temperature (CMT) values of the copolymer decreased with an increase of KCl concentration while micellar core gets progressively dehydrated. The results reveal the leading role of salt‐water interaction in promoting the micellization of PEO‐PPO‐PEO copolymer by the addition of salt. No significant micellar growth was seen even at temperatures close to cloud point.     

The Effects of Salts and Ionic Surfactants on the Micellar Structure of Tri‐Block Copolymer PEO‐PPO‐PEO in Aqueous Solution

The micelles of two poly(ethylene oxide)‐poly(propylene oxide)‐poly(ethylene oxide) (PEO‐PPO‐PEO) block copolymers, P123 and F127 (same mol wt of PPO but different % PEO) in aqueous solution in the absence and presence of salts as well as ionic surfactants were mainly examined by dynamic light scattering (DLS). The study is further supported by cloud point and viscosity measurements. The change in cloud point (CP), as well as the size of micelles in aqueous solution in presence of salts obeys the Hofmeister lyotropic series. Addition of both cationic cetylpyridinium chloride (CPC) and anionic sodium dodecylsulfate (SDS) surfactants in the aqueous solution of P123 show initial decrease of micellar size from 20 nm to nearly 7 nm and then increasing with a double relaxation mode, further in the presence of NaCl this double relaxation mode vanishes. The effect of surfactant on F127, which has much bigger hydrophilic part is different than P123 and have no double relaxation. The relaxation time distributions is obtained using the Laplace inversion routine REPES. Two relaxation modes for P123 are explained on the bases of Pluronic rich mixed micelles containing ionic surfactants and the other smaller, predominantly surfactant rich micelles domains.     

Towards microphase separation in epoxy systems containing PEO/PPO/PEO block copolymers by controlling cure conditions and molar ratios between blocks. Part 2. Structural characterization

The influence of addition of poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (PEO–PPO–PEO) copolymers on final morphologies of modified epoxy matrices has been investigated as a function of PEO:PPO molar ratio and cure conditions by comparison with the cured epoxy blends only containing poly(ethylene oxide) (PEO) or poly(propylene oxide) (PPO) homopolymers. Atomic force microscopy (AFM) has been used to characterize structural features of blends. Whilst diglycidyl ether of bisphenol-A (DGEBA)/4,4’-diaminodiphenylmethane (DDM)/PPO system macrophase separates, the interactions between PEO and cured epoxy are responsible for miscibility of DGEBA/DDM/PEO system. Depending on PEO:PPO molar ratio, micro- or macrophase separated morphologies have been obtained for block copolymer modified epoxy matrices. Moreover, the influence of both copolymer content and cure temperature on final morphologies has also been investigated by both experimental and theoretical analysis.     

Polyene photoisomerization rates: are they distinct in aqueous block copolymer micellar solutions and gels?

Photoisomerization of 3,3'-diethyloxadicarbocyanine iodide (DODCI) has been investigated in water, 5% and 30% aqueous triblock copolymer, poly(ethylene oxide)20-poly(propylene oxide)70-poly(ethylene oxide)20 (P123) by measuring the fluorescence quantum yields and lifetimes in the temperature range 293-318 K. Reports available in literature indicate that 5% aqueous P123 exists as micellar solution, whereas 30% aqueous P123 forms gel due to micelle-micelle entanglement. This study has been undertaken to find out how the polyene photoisomerization rates are influenced in the sol and gel phases. It has been observed that 60%-70% of DODCI is located in the palisade layer of the micelles in the sol as well as gel phases and the photoisomerization rate of this component is identical in both the phases at a particular temperature. The remainder of the probe is located in the interfacial region and isomerization rates of this fraction are slower by a factor of 1.4-1.1 in the gel phase compared with the micellar solution. The retardation of the isomerization rate in the gel phase has been explained on the basis of enhancement in the friction experienced by the probe due to micelle-micelle entanglement at the interface. Compared to the isomerization rates in water, the rates of photoisomerization of DODCI located in the palisade layer, interfacial region of micellar solution, and interfacial region of the micelles in the gel phase are slower by factors of 3.5, 1.5-1.9, and 2, respectively. The outcome of this study validates the point that in organized media photoisomerization rates are sensitive to the localized friction, which is not uniform unlike in a homogeneous solution.     

水溶液中Pluronic嵌段共聚物聚集行为的介观模拟

通过介观动力学方法(MesoDyn)研究了低浓度下的三嵌段共聚物PEO27PPO61PEO27 (P104)水溶液的聚集行为, 讨论了聚合物浓度、模拟时间对P104水溶液相行为的影响. 在聚合物浓度较低(φ<35%)的情况下, 可以形成三种不同的胶束聚集体：球形胶束(spherical micelle)、胶束簇(micellar cluster)和盘状胶束(disk-like micelle). (1) 球形胶束(5%-10%, φ), 模拟的胶束结构表明疏水的PPO嵌段形成球形内核(micellar core), 而亲水的PEO嵌段形成核壳(micellar corona), 并有水分子存在内核和核壳之中；(2) 胶束簇(11%-15%, φ), 由于球形胶束之间的缔合, 形成直径明显高于球形胶束的聚集体, 其半径比球形胶束大1 nm左右；(3) 盘状胶束(16%-25%, φ), 胶束簇核壳PEO嵌段之间的相互缠绕, 形成了成串的类似盘状的胶束. 模拟中有序参数随浓度的变化证明了这种结构划分的合理性.     

Rotational diffusion of ionic and neutral solutes in mixed micelles: effect of surfactant to block copolymer mole ratio on solute rotation

Rotational diffusion of an ionic solute rhodamine 110 and a neutral solute 2,5-dimethyl-1,4-dioxo-3,6-diphenylpyrrolo[3,4-c]pyrrole (DMDPP) has been investigated in aqueous mixtures of cetyltrimethylammonium chloride (CTAC) and poly(ethylene oxide)20-poly(propylene oxide)70-poly(ethylene oxide)20 (P123). The purpose of this work is to understand how an increase in the mole ratio of surfactant to block copolymer from low to high influences the dynamics of ionic and neutral solute molecules. The variation in the mole ratio of CTAC to P123 from low to high has resulted in a drastic increase in the average reorientation time of rhodamine 110. In contrast, an exactly opposite trend has been noticed in the case of DMDPP. In the low mole ratio regime, rhodamine 110 and DMDPP are located at the interface and palisade layer, respectively, of P123 micelle-CTAC complexes. On the other hand, in the high mole ratio regime, both the probes are located in the Stern layer of CTAC-P123 complexes. The enhancement in the average reorientation time of rhodamine 110 with an increase in the mole ratio of surfactant to block copolymer has been rationalized on the basis of formation of rhodamine 110-Cl ion pair, which in turn associates with the cationic head groups of CTAC-P123 complexes. The observed decrease in the average reorientation time of DMDPP with an increase in the mole ratio of CTAC to P123 is a consequence of lower microviscosity of the Stern layer of CTAC-P123 complexes compared to the palisade layer of P123 micelle-CTAC complexes.     

Rupturing polymeric micelles with cyclodextrins

Small-angle neutron scattering has been used to investigate the associative structures formed by triblock copolymers of poly(ethylene oxide) (PEO)-polypropylene oxide (PPO)-poly(ethylene oxide) (PEO) (also known as Pluronics) and to monitor the structural changes occurring upon complexation with heptakis(2,6-di-O-methyl)-beta-cyclodextrin (hbeta-CD) over the temperature range from 5 to 70 degrees C. At low temperature, the Pluronics are dispersed as unimers. Close to ambient temperature, the hydrophobicity of PPO causes the aggregation of the polymers into spherical micelles with core sizes between 40 and 50 A and a high inclusion of solvent. The aggregation number increases with temperature as the hydrophobicity of the core is gradually enhanced. hbeta-CD spontaneously forms pseudopolyrotaxanes with the triblock copolymers either when in their unimer form or micellized. The complexation results in an increase in the effective critical micellar concentration. It is suggested that the cyclodextrins thread onto the polymer backbone to localize preferentially on the central PPO block, therefore improving its water solubility. At temperatures where the polymers exist in micellar form, complexation with hbeta-CD gives rise to a complete disruption of the aggregates. These processes are highly temperature-dependent. Above 50 degrees C, the break-up of the aggregates is inhibited, and large-scale aggregation is observed.     

Interaction of amphiphilic block copolymer micelles with surfactants

An out line and summary of literature studies on interactions between different types of amphiphilic copolymer micelles with surfactants has been given. This field of research is still emerging and it is difficult presently to make generalisations on the effects of surfactants on the copolymer association. The effects are found to be varied depending upon the nature and type of hydrophobic (hp) core and molecular architecture of the copolymers and the hydrocarbon chain length and head group of surfactants. The information available on limited studies shows that both anionic and cationic surfactants (in micellar or molecular form) equally interact strongly with the associated and unassociated forms of copolymers. The beginning of the interaction is typically displayed as critical aggregation concentration (CAC), which lies always below the critical micelle concentration of the respective surfactant. The surfactants first bind to the hydrophobic core of the copolymer micelles followed by their interaction with the hydrophilic (hl) corona parts. The extent of binding highly depends upon the nature, hydropobicity of the copolymer molecules, length of the hydrocarbon tail and nature of the head group of the surfactant. The micellization of poly(ethylene oxide) (PEO)–poly(propylene oxide) (PPO)–poly(ethylene oxide) was found to be suppressed by the added surfactants and at higher surfactant concentrations, the block copolymer micelles get completely demicellized. This effect was manifested itself in the melting of liquid crystalline phases in the high copolymer concentrations. However, no such destabilization was found for the micelles of polystyrene (PS)–poly(ethylene oxide) copolymers in water. On the contrary, the presence of micellar bound surfactant associates resulted in to large super micellar aggregates through induced intra micellar interactions. But with the change in the hydrophobic part from polystyrene to poly(butadiene) (PB) in the copolymer, the added surfactants not only reduced the micellar size but also transformed cylindrical micelles to spherical ones. The mixtures in general exhibited synergistic effects. So varied association responses were noted in the mixed solutions of surfactants and copolymers.     

Effect of "inverse melting transition" of aqueous triblock copolymer solutions on solute rotational dynamics

Rotational dynamics of two structurally similar hydrophobic solutes, 2,5-dimethyl-1,4-dioxo-3,6-diphenylpyrrolo[3,4-c]pyrrole (DMDPP) and 1,4-dioxo-3,6-diphenylpyrrolo[3,4-c]pyrrole (DPP), has been investigated in 30% wv aqueous solution of triblock copolymer, poly(ethylene oxide)(20)-poly(propylene oxide)(70)-poly(ethylene oxide)(20) as a function of temperature. This study has been undertaken in an attempt to explore how the dynamics of a solute molecule solubilized in a copolymer solution is influenced when it undergoes sol-to-gel transition. It has been observed that the anisotropy decays of both DMDPP and DPP can be described by biexponential functions in the sol as well as in the gel phase. This observation has been rationalized on the basis of the probe molecule undergoing two different kinds of motion rather than being located in two different regions of the micelle. Even in the gel phase, which results as a consequence of micelle-micelle entanglement due to an increase in their volume fraction, the rotational relaxation of the solutes is similar to that observed in the micellar solution. The outcome of this work indicates that even though these gels have very high macroscopic viscosities and hence do not flow, the microenvironments experienced by the solutes are akin to that of a micellar solution.     

Microenvironment in the corona region of triblock copolymer micelles: temperature dependent solvation and rotational relaxation dynamics of coumarin dyes

Dynamic Stokes' shift and fluorescence anisotropy measurements using coumarin-153 (C153) and coumarin-151 (C151) as the fluorescence probes have been carried out in aqueous poly(ethylene oxide)20-poly(propylene oxide)70-poly(ethylene oxide)20 (P123) and poly(ethylene oxide)100-poly(propylene oxide)70-poly(ethylene oxide)100 (F127) block copolymer micelles with an aim to understand the water structures and dynamics in the micellar corona region. It has been established that the probes reside in the micellar corona region. It is indicated that the corona regions of P123 and F127 micelles are relatively less hydrated than the Palisade layers of neutral micelles like Triton-X-100 and Brij-35. From the appraisal of total Stokes' shift values for the probes in the two block copolymer micelles, it is inferred that the F127 micelle is more hydrated than the P123 micelle. It is observed that the dynamic Stokes' shift values for both of the probes remain more or less similar at all the temperatures studied in the P123 micelle. For C153 in F127, however, the observed Stokes' shift is seen to decrease quite sharply with temperature, though it remains quite similar for C151. Moreover, the fraction of the unobserved initial dynamic Stokes' shift is appreciably higher for both the probes in the F127 micelle compared to that in P123. Over the studied temperature range of 293-313 K, the spectral shift correlation function is described adequately by a bi-exponential function. Rotational relaxation times for C153 in both the micelles show a kind of transition at around 303 K. These results have been rationalized assuming collapse of the poly(ethylene oxide) (PEO) blocks and formation of water clusters in the corona region due to dehydration of poly(ethylene oxide) blocks with an increase in temperature. A dissimilar probe location has been inferred for the differences in the results with C153 and C151 probes in F127. Comparison of the microviscosity and the hydration of the block copolymer micelles has also been made with those of the other commonly used neutral micelles, for a better understanding of the results in the block copolymer micelles.     

Apparent Specific Volume Measurements of Poly(ethylene oxide), Poly(butylene oxide), Poly(propylene oxide), and Octadecyl Chains in the Micellar State as a Function of Temperature

Apparent specific densities of aqueous solutions of the diblock copolymers C18(EO)100, C18(EO)20, and (EO)92(BO)18 and the triblock copolymers (EO)25(PO)40(EO)25 and (EO)21(PO)47(EO)21 in the micellar state have been measured over a temperature range from 10 to 90 degrees C at concentrations between 1% and 5%, using an oscillating tube densitometer. From these measurements, apparent specific volumes of poly(ethylene oxide) (PEO), poly(propylene oxide) (PPO), poly(butylene oxide) (PBO), and octadecane in the micellar state have been determined. The composition of the block copolymers was checked by NMR spectroscopy. Results were compared with published data for the polymers and bulk values for octadecane, respectively. The apparent specific density of PEO chains in the dissolved state was also measured for PEG4600 solutions at different concentrations and compared with results in the micellar state. The results presented in the paper are crucial in connection with analysis and modeling of small-angle X-ray scattering (SAXS) data from polymer and block copolymer micellar systems. PEO and PPO have a relatively low apparent partial specific volume in water at low temperatures. It is associated with water molecules making strong hydrogen bonds with the oxygen atoms on the polymer backbone. These water molecules gradually become disordered when the temperature is increased and the polymer apparent specific volume increases. For PBO in the micellar cores of PBO-PEO block copolymer micelles and in PNiPAM microgels, pronounced temperature dependence with the same origin is also found. The application of the derived results for the apparent specific volume of PEO for deriving contrast factors is demonstrated and the results are used in the analysis of SAXS data for semidilute solutions of PEG4600 in a broad temperature range.     

Structure of polymer-stabilized magnetic fluids: small-angle neutron scattering and mean-field lattice modeling

Small-angle neutron scattering and mean-field lattice modeling were used to characterize a class of water-based magnetic fluids tailored specifically to extract soluble organic compounds from water. The fluids consist of a suspension of approximately 7 nm magnetite (Fe3O4) nanoparticles coated with a bifunctional polymer layer comprised of an outer hydrophilic poly(ethylene oxide) (PEO) region for colloidal stability and an inner hydrophobic poly(propylene oxide) (PPO) region for solubilization of organic compounds. The inner region of the polymer shell is increasingly depleted of water as the fraction of PPO side chains increases. The incorporation of PPO side chains also leads to a small increase in interparticle attraction. The lattice model predicted a shell structure similar to that of a PEO-PPO-PEO triblock copolymer (Pluronic) micelle, with equivalent levels of hydration but with more PEO present in the PPO-rich regions, as the side chains grafted to the surface are less able to segregate than when in free micellar systems.     

Cloud Point Phenomena of Mixed Block Copolymers

Cloud points data on solutions of a poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) (PEO–PPO–PEO) abbreviated as EPE or Pluronics, such as P–65, P–84, P–85, P-105, L-64, and their mixtures at different salt (NaCl) concentrations in water are reported. The addition of NaCl to these mixed copolymers decreases cloud point, increases surface activity, and shifts micellization to lower concentration. In presence of NaCl, more surfactant is needed for demicellization of P105 micelles.     

嵌段共聚物傅里叶变换拉曼光谱

用傅里叶变换拉曼光谱(FT-Paman)研究了聚环氧乙烷-聚环氧丙烷-聚环氧乙烷(PEO-PPO-PEO)嵌段共聚物的无水样品,发现某些谱带对PEO0-PPO-PEO嵌段共聚物的结构和构象变化敏感,其中某些峰的相对强度的PPO/PEO比率和共聚物的构象有关,研究表明PluronicF68和F88具有一些反式构象的螺旋结构,PluronicP103(P123)是无规则结构,其它的嵌段共聚物处于二者之间.     

Solubilization of Hydrophilic Compounds in Copolymer Aggregates

The solubilization of five hydrophilic water-soluble aroma compounds in self-aggregating triblock amphiphilic copolymers of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO), with similar percentages of PEO and different molecular weights, was studied. The five hydrophilic compounds (diacetyl, 2-methylpyrazine, pyrrole, furfural, guaiacol) were carefully selected to represent hydrophilic molecules with a similar molecular weight and molecular volume, but with different abilities to interact with the micellar core of PPO moieties and with the PEO palisade side chains. It was found that the solubilized solute mole fraction increased and the aggregate-water partition coefficients of the solutes decreased with increasing free solute concentration in the aqueous phase. The partition coefficients were smaller than those obtained for hydrophobic compounds and equilibrium was reached at lower solubilization values. Guaiacol was the least hydrophilic molecule and had the highest partition coefficient. Diacetyl was the most water-soluble compound and exhibited the smallest partition coefficient. The data reveal that the higher molecular weight polymers solubilized more solute than the low-molecular-weight polymers. Moreover it is supposed that at low solute concentrations, guaiacol (containing a hydroxyl electron acceptor group) penetrates the core of the micelle and displaces water while at more elevated concentrations it seems to be solubilized in the micelle corona. Diacetyl, the most hydrophilic solute investigated (consisting of electron donor groups), prefers mainly the corona since its affinity for the polymeric core is very weak. The solubilization occurs in the palisade layer and the partition coefficient is independent of the free solute concentration. Selective site (palisade vs core) solubilization of hydrophilic compounds in polymeric micelles can be a powerful tool to protect sensitive materials from reactants present in the continuous water phase and to conduct surface-sensitive organic reactions. Furthermore, selective release properties of reactants and products can be designed. Copyright 2000 Academic Press.     

Dissipative particle dynamics simulation of gold nanoparticles stabilization by PEO–PPO–PEO block copolymer micelles

Dissipative particle dynamics (DPD) was used to simulate the formation and stabilization of gold nanoparticles in poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) (PEO–PPO–PEO) block copolymer micelles. Primary gold clusters that were experimentally observed in the early stage of gold nanoparticle formation were modeled as gold bead in DPD simulation. It showed that gold beads were wrapped by the block copolymer and aggregated into spherical particles inside the micelles and forming stable Pluronic–gold colloids with two-layer structures. Increasing Pluronic concentration, molecular weight, and PPO block length led to the formation of more uniform and more stable gold nanoparticles. Density profiles of water beads suggested that the micelles, especially the hydrophobicity of the micellar cores, played an important role in stabilizing gold nanoparticles. Dynamic process indicated that the formation of gold nanoparticles was controlled by the competition between aggregation of primary gold clusters and the stabilization by micelles of block copolymers.. The DPD simulation results of gold–copolymer–water system agree well with previous experiments, while more structure information on microscopic level could be provided.     

Segregation of Coronal Chains in Micelles Formed by Supramolecular Interactions

Summary: Spherical micelles have been formed by mixing, in DMF, a poly(styrene)‐block‐poly(2‐vinylpyridine)‐block‐poly(ethylene oxide) (PS‐block‐P2VP‐block‐PEO) triblock copolymer with either poly(acrylic acid) (PAA) or a tapered triblock copolymer consisting of a PAA central block and PEO macromonomer‐based outer blocks. Noncovalent interactions between PAA and P2VP result in the micellar core while the outer corona contains both PS and PEO chains. Segregation of the coronal chains is observed when the tapered copolymer is used.

Inclusion of comb‐like chains with short PEO teeth in the corona triggers the nanophase segregation of PS and PEO as illustrated here (PS = polystyrene; PEO = poly(ethylene oxide)).     

Mixed self-assembly of poly(ethylene oxide)-b-poly(epsilon-caprolactone) copolymers and sodium dodecyl sulfate in aqueous solution

Interaction of amphiphilic poly(ethylene oxide)-b-poly(epsilon-caprolactone) copolymers with anionic sodium dodecyl sulfate (SDS) has been investigated in aqueous solution. Formation of mixed micelles has been confirmed by surface tension measurements, whereas the influence of the surfactant on the copolymer self-assembling has been studied by measurement of the 1H NMR self-diffusion coefficients and by small-angle neutron scattering. As a rule, the surfactant decreases the heterogeneity of the micellar structures formed by the copolymer in water. Moreover, increasing the content of SDS results in the increasingly more important extension of the poly(ethylene oxide) (PEO) corona chains and the copolymer micelle deaggregation. The stability of the micelles against SDS increases with the length of the hydrophobic block. Preliminary two-dimensional NMR measurements with nuclear Overhauser enhancement have confirmed the spatial vicinity between SDS and the constitutive blocks of the copolymer.