Strategy for the chiral separation of non-acidic pharmaceuticals using capillary electrochromatography

In completion of an earlier defined generic chiral screening approach, a generic separation strategy for basic, bifunctional, and neutral compounds was proposed and evaluated. This strategy adds to a previously defined strategy for acidic compounds. The screening experiment of the actual strategy used a mobile phase of 5 mM phosphate buffer pH 11.5/ACN (30/70 v/v), a temperature of 25 degrees C, and a voltage of 15 kV. The selected chiral stationary phases were Chiralpak AD-RH, Chiralcel OD-RH, Chiralcel OJ-RH, and Chiralpak AS-RH, all based on polysaccharide selectors. It was seen that 31 out of 48 test compounds were partially or baseline-resolved under screening conditions. After execution of the optimization steps of the strategy, this number increased to 41, with a total of 21 baseline-separated compounds. Combined with the results obtained from the acidic test set examined in the earlier defined strategy, of all tested compounds 82.5% showed enantioselectivity and 49.2% could be baseline-separated.     

Separation of acidic compounds by strong anion-exchange capillary electrochromatography

Separation of the acidic compounds in the ion-exchange capillary electrochromatography (IE-CEC) with strong anion-exchange packing as the stationary phase was studied. It was observed that the electroosmotic flow (EOF) in strong anion-exchange CEC moderately changed with increase of the eluent ionic strength and decrease of the eluent pH, but the acetonitrile concentration in the eluent had almost no effect on the EOF. The EOF in strong anion-exchange CEC with eluent of low pH value was much larger than that in RP-CEC with Spherisorb-ODS as the stationary phase. The retention of acidic compounds on the strong anion-exchange packing was relatively weak due to only partial ionization of them, and both chromatographic and electrophoretic processes contributed to separation. It was observed that the retention values of acidic compounds decreased with the increase of phosphate buffer and acetonitrile concentration in the eluent as well as the decrease of the applied voltage, and even the acidic compounds could elute before the void time. These factors also made an important contribution to the separation selectivity for tested acidic compounds, which could be separated rapidly with high column efficiency of more than 220000 plates/m under the optimized separation conditions.     

Enantioseparations of basic and bifunctional pharmaceuticals by capillary electrochromatography using polysaccharide stationary phases

A fast screening strategy was developed in capillary electrochromatography (CEC) for the chiral separation of basic and bifunctional compounds. The screening conditions were determined on polysaccharide chiral stationary phases using 15 pharmaceutical compounds. The content and type of organic modifier, as well as the pH of the mobile phase appeared to have the largest influence on the chiral resolution. It was seen that for acidic compounds, our approach was not suitable. A generic mobile phase for basic and bifunctional compounds was determined. The testing on 20 additional compounds showed that the proposed mobile phase performed well since enantioselectivity was observed for 86% of the investigated compounds. A comparison of CEC and reversed-phase liquid chromatography (RPLC) results was attempted to demonstrate the potential of the used technique for chiral method development.     

Implementation of a rapid and automated high performance liquid chromatography method development strategy for pharmaceutical drug candidates

A comprehensive, fully automated strategy is demonstrated for HPLC-UV chromatographic method development using ChromSword optimization software. The strategy involves: (1) the automated screening of various column and mobile phase combinations, (2) rational selection of the best starting conditions; and (3) subsequent automated method development to generate optimized separation methods. Pharmaceutical compounds were applied to solve problematic drug impurity separations. ChromSword software automates the screening, optimization, and documentation steps thus reducing the method development time. The strategy was compared to a manual method development approach showing the automated method strategy affords better selectivity in a shorter time.     

Screening approach for chiral separation of pharmaceuticals part II. Reversed-phase liquid chromatography

A screening strategy for the rapid separation of drug enantiomers by reversed-phase liquid chromatography was developed using three cellulose/amylose stationary phases. The key point to achieve enantioselectivity is the control of the compound ionisation. Only two mobile phases, i.e. an acidic phosphate buffer (pH 2.0) containing a chaotropic salt (KPF6) and a borate buffer (pH 9.0) mixed with acetonitrile, are used in the proposed strategy. This strategy was successfully applied to a set of 37 diverse chiral pharmaceuticals. Satisfactory enantioselectivity was achieved for 89% of them.     

Screening approach for chiral separation of pharmaceuticals IV. Polar organic solvent chromatography

The aim of this work is to determine generic screening conditions and an initial simple separation strategy allowing the rapid separation of drug enantiomers in polar organic solvent chromatography (POSC). Four cellulose/amylose-based stationary phases were investigated in detail using two mobile phase basis solvents commonly applied in this mode, i.e. acetonitrile and methanol. Polar mode is interesting for use in purification of enantiomers. In a first step, the parameters potentially influencing the separation, such as addition of an alcohol to the polar organic solvent or the type of mobile phase additive(s), were examined by means of experimental designs. Afterwards, the factors found most important are investigated in more detail. Results showed that the cellulose- and amylose-based stationary phases have very broad and complementary enantiorecognition abilities in the POSC mode. The type of organic solvent for the mobile phase appeared to have a dramatic influence on the quality of the separation. Based on the results, a screening strategy was proposed. Enantioseparation was observed in more than 85% of the tested compounds and analysis times of last eluted peak were usually below 10 min.     

Brush-type chiral stationary phase for enantioseparation of acidic compounds. Optimization of chiral capillary electrochromatographic parameters

The capillary electrochromatographic separations of three acidic enantiomers (carprofen, coumachlor and warfarin) were studied on a capillary column packed with 5 microm (3R,4S)-Whelk-O 1 chiral stationary phase. The influence of several experimental parameters (mobile phase pH, type of background electrolyte, acetonitrile ratio, temperature, applied voltage and ionic strength) on electroosmotic flow velocity, retention factor, selectivity factor, efficiency, resolution and effectiveness of chiral separation was evaluated. It was notable that the optimum resolution of the acidic enantiomers was achieved at pH 3.0 phosphate buffer, suggesting that capillary electrochromatography in the ion-suppressed mode can be applied for chiral separations of a range of acidic compounds.     

Enantioselective Separation of Basic Drugs by CE with Polygalacturonic Acid as a Novel Chiral Selector

Polygalacturonic acid, a linear high molecular weight homopolysaccharide was investigated as a chiral selector in capillary zone electrophoresis for the separation of enantiomers of basic drugs. The choices of running buffer pH and concentration of chiral selector were found to be important for the improvement of enantioselectivity. The effects of background electrolyte concentration and the capillary temperature on the separation were also examined. Enantioseparations were carried out in the acidic conditions using 1.5% polygalacturonic acid (w/v) in a 40 mM phosphate buffer under an applied voltage of 15 kV. The optimization of these separations was dependent on the nature of the analytes and could be achieved by the proper choice of experimental conditions. A brief mechanism of enantiorecognition by polygalacturonic acid was also given.     

Experimental design optimization of a capillary zone electrophoresis method for the screening of several diuretics and ACE inhibitors

Experimental design methodologies are applied to the development of a capillary zone electrophoretic method for the separation of the angiotensin-converting enzyme inhibitor enalapril and its derivative enalaprilat and the diuretics xipamide and hydrochlorothiazide. The effects of pH, buffer concentration, proportion of boric acid in the mixed boric acid-potassium dihydrogen phosphate background electrolyte, temperature, applied voltage, and percentage of organic modifier are studied. Critical factors are identified in a screening design (a 2(6-2) fractional factorial design), and afterwards, optimal conditions for the separation are reached by means of an optimization design (a 2(2) + 2 x 2 + k central composite design). The studied response is the resolution between peaks. The four studied compounds can be separated in less than 3.5 min using an electrolyte of 20mM boric acid-potassium dihydrogen phosphate (75:25, v/v) with 5% MeOH adjusted to pH 8.0 with KOH, at a potential of 30 kV. The detection wavelength and temperature are 206 nm and 35 degrees C, respectively.     

Fast separations of chiral β-blockers on a cellulose tris(3,5-dimethylphenylcarbamate)-coated zirconia monolithic column by capillary electrochromatography

Cellulose tris(3,5-dimethylphenylcarbamate) (CDMPC) is an excellent chiral selector for enantioseparation of a wide variety of chiral compounds. The monolithic chiral columns are becoming popular in liquid chromatography and capillary electrochromatography. In this work, we present the fast separation of chiral β-blockers on a CDMPC-modified zirconia monolithic column by capillary electrochromatography (CEC). The porous zirconia monolithic capillary column was prepared by using the sol-gel technology and then zirconia surface modified with CDMPC. The enantioseparations were performed in reversed-phase (RP) eluents of a phosphate solution (pH 4.4) modified with acetonitrile or alcohol. The enantioseparations of a set of eight chiral β-blockers were achieved in less than one minute. Influences of the applied voltage, column temperature, concentration of acetonitrile and the type of alcohol as the organic modifier in the mobile phase, and sample injection time on enantioseparation were investigated. CEC separations at the applied voltage of 10 kV and 15 °C in the ACN-modified mobile phase provided the best resolutions for the analytes studied. Run-to-run and day-to-day repeatabilities of the column in the RP-CEC separation were less than 1 and 2%, respectively.     

Enantioselective Separation of Basic Drugs by CE with Polygalacturonic Acid as a Novel Chiral Selector

Polygalacturonic acid, a linear high molecular weight homopolysaccharide was investigated as a chiral selector in capillary zone electrophoresis for the separation of enantiomers of basic drugs. The choices of running buffer pH and concentration of chiral selector were found to be important for the improvement of enantioselectivity. The effects of background electrolyte concentration and the capillary temperature on the separation were also examined. Enantioseparations were carried out in the acidic conditions using 1.5% polygalacturonic acid (w/v) in a 40 mM phosphate buffer under an applied voltage of 15 kV. The optimization of these separations was dependent on the nature of the analytes and could be achieved by the proper choice of experimental conditions. A brief mechanism of enantiorecognition by polygalacturonic acid was also given.

     

咖啡因及其9种类似物的胶束电动毛细管分析研究

 以十二烷基硫酸钠 (SDS)胶束为准固定相 ,考察了咖啡因及其 9种类似物在胶束电动毛细管 (MECC)分离模式下的分离行为。研究了运行缓冲液的 pH值、磷酸盐浓度、SDS浓度、甲醇体积分数、分离电压、分离温度等因素对这 10种化合物的迁移时间和分离效果的影响。结果发现 ,这些因素对上述 10种化合物的分离有显著的影响 ,尤以pH值为最。它不仅影响化合物的迁移时间和分离效率 ,还改变其出峰顺序 ,这与碱性条件下化合物仲胺基上氢的电离有关。优化后的分离条件 :运行缓冲液为 2 0mmol/L磷酸盐 2 0mmol/LSDS(pH 11 0 ) ,分离电压为2 5kV。     

Optimising reversed-phase liquid chromatographic separation of an acidic mixture on a monolithic stationary phase with the aid of response surface methodology and experimental design

An optimization strategy for the separation of an acidic mixture by employing a monolithic stationary phase is presented, with the aid of experimental design and response surface methodology (RSM). An orthogonal array design (OAD) OA(16) (2(15)) was used to choose the significant parameters for the optimization. The significant factors were optimized by using a central composite design (CCD) and the quadratic models between the dependent and the independent parameters were built. The mathematical models were tested on a number of simulated data set and had a coefficient of R(2) > 0.97 (n = 16). On applying the optimization strategy, the factor effects were visualized as three-dimensional (3D) response surfaces and contour plots. The optimal condition was achieved in less than 40 min by using the monolithic packing with the mobile phase of methanol/20 mM phosphate buffer pH 2.7 (25.5/74.5, v/v). The method showed good agreement between the experimental data and predictive value throughout the studied parameter space and were suitable for optimization studies on the monolithic stationary phase for acidic compounds.     

新型亚微米亲水作用色谱的制备及其在加压毛细管电色谱中的应用

采用改良Stöber法合成580 nm亚微米单分散的二氧化硅微球，并以此为基质，通过"巯基-烯"点击化学反应将半胱氨酸成功键合到修饰有乙烯基团的二氧化硅微球表面，合成了一种新型亚微米亲水作用固定相（Cys-VTMS-SiO₂）。采用高压匀浆法制备了新型亚微米亲水色谱填充柱，通过不同乙腈比例、缓冲盐浓度和pH条件下对甲苯、丙烯酰胺和硫脲的分离分析揭示其亲水机理。依托加压毛细管电色谱平台，成功实现了对核苷、酚类、胺类及多肽等亲水性物质的快速有效分离，其有望应用于其他强极性和亲水性化合物的分离分析。     

Design of experiments for capillary electrophoretic enantioresolution of salbutamol using dermatan sulfate

Statistical experimental design was used for the optimization and for robustness evaluation of a capillary electrophoretic method developed for the enantioresolution of salbutamol. Dermatan sulfate was used as chiral selector. The goal of the study was to obtain an efficient and fast separation. An eight-run Plackett-Burman matrix was used during the optimization process for the screening of the factors and to adjust the experimental domain under study. Response surface methodology was adopted after the screening phase to obtain information about how the factors percentage of chiral selector, pH and voltage affected the considered responses resolution and analysis time. The Derringer desirability function, which makes it possible to combine results obtained for properties measured on different scales, was used to simultaneously optimize the two responses. Robustness testing was carried out using a Plackett-Burman matrix. The method was found robust as regards the response resolution while voltage and chiral selector were found to be critical factors for the robustness of analysis time response. The proposed CE method permitted the complete enantioseparation of racemic salbutamol and was applied to its chiral resolution in spiked urine samples.     

胶束电动毛细管色谱法分析头孢哌酮与其S-异构体等杂质

以十二烷基硫酸钠(SDS)胶束为准固定相,考察了头孢哌酮、头孢哌酮S-异构体、头孢哌酮杂质A及其他未知杂质在胶束电动毛细管色谱(MECC)分离模式下的分离行为。研究了运行缓冲液的pH值、磷酸盐浓度、SDS浓度、甲醇体积分数、分离电压、分离温度等因素对头孢哌酮、S-异构体、头孢哌酮杂质A及其他杂质的迁移时间、分离度以及可分离出的杂质个数的影响。结果发现,这些因素对头孢哌酮与诸杂质间的分离及检测有显著的影响,尤以pH值为最。它不仅影响它们的迁移时间和分离效率,还直接影响头孢哌酮及其杂质峰的检测。优化后的分离条件:运行缓冲液为70 mmol/L磷酸盐-100 mmol/L SDS (pH 6.5),分离电压为15 kV,分离温度为25 ℃。在此条件下,用非涂渍石英毛细管51.0 cm×75 μm(有效长度42.5 cm),压力进样5 kPa×5 s,在254 nm波长下进行检测,可分离出28个杂质,诸杂质彼此间及与头孢哌酮间可得到有效分离。并将该方法成功地用于测定注射用头孢哌酮钠的含量和有关物质,结果令人满意。     

Determination of Antiviral Drugs and Their Metabolites Using Micro-Solid Phase Extraction and UHPLC-MS/MS in Reversed-Phase and Hydrophilic Interaction Chromatography Modes

Two new ultra-high performance liquid chromatography (UHPLC) methods for analyzing 21 selected antivirals and their metabolites were optimized, including sample preparation step, LC separation conditions, and tandem mass spectrometry detection. Micro-solid phase extraction in pipette tips was used to extract antivirals from the biological material of Hanks balanced salt medium of pH 7.4 and 6.5. These media were used in experiments to evaluate the membrane transport of antiviral drugs. Challenging diversity of physicochemical properties was overcome using combined sorbent composed of C₁₈ and ion exchange moiety, which finally allowed to cover the whole range of tested antivirals. For separation, reversed-phase (RP) chromatography and hydrophilic interaction liquid chromatography (HILIC), were optimized using extensive screening of stationary and mobile phase combinations. Optimized RP-UHPLC separation was carried out using BEH Shield RP18 stationary phase and gradient elution with 25 mmol/L formic acid in acetonitrile and in water. HILIC separation was accomplished with a Cortecs HILIC column and gradient elution with 25 mmol/L ammonium formate pH 3 and acetonitrile. Tandem mass spectrometry (MS/MS) conditions were optimized in both chromatographic modes, but obtained results revealed only a little difference in parameters of capillary voltage and cone voltage. While RP-UHPLC-MS/MS exhibited superior separation selectivity, HILIC-UHPLC-MS/MS has shown substantially higher sensitivity of two orders of magnitude for many compounds. Method validation results indicated that HILIC mode was more suitable for multianalyte methods. Despite better separation selectivity achieved in RP-UHPLC-MS/MS, the matrix effects were noticed while using both chromatographic modes leading to signal enhancement in RP and signal suppression in HILIC.     

Separation of structurally related estrogens using isocratic elution pressurized capillary electrochromatography

In this paper, the pressurized capillary electrochromatography (pCEC) with UV detection was utilized for the separation and determination of three structurally related estrogens, such as diethylstilbestrol (DES), hexestrol (HEX) and dienestrol (DE), which were difficult to be separated by capillary electrophoresis (CE) and HPLC due to their similarity in the structure and charge-to-mass ratios. Experiments were carried out in a commercially available pCEC instrument using a capillary column packed with 3 microm octadecyl silica (ODS). Surfactant sodium dodecyl sulfate (SDS) was introduced in the mobile phase to enhance the speed of analysis. The effective factors on the retention time and separation resolution, such as the applied voltage, supplementary pressure, the pH and the concentration of the buffer solution, the concentration of SDS, and the content of acetonitrile in the mobile phase, were evaluated. Based on the investigation, 31% (v/v) acetonitrile and 69% (v/v) of 10 mmol/L phosphate buffer (pH 6.5) containing 1.0 mmol/L SDS at an applied voltage of -12 kV and a supplementary pressure of 1000 psi were found to be the optimal conditions for pCEC to separate the three estrogens. The method also had been applied to the analysis of fish muscle samples spiked with estrogens.     

磺丁基醚-β-环糊精修饰毛细管电色谱拆分地平类药物对映体

采用甲基丙烯酸缩水甘油酯原位聚合物基质, 将磺丁基醚-β-环糊精修饰到毛细管内壁, 制得了一种毛细管电色谱手性柱(SECDP), 并通过红外光谱(IR)和扫描电子显微镜(SEM)表征了其结构. 磺酸基可提供足够稳定的正向电渗流(EOF), 基于磺丁基醚-β-环糊精在固定相和流动相中的协同作用, 通过优化手性添加剂浓度、 pH值、 施加电压、 温度及有机调节剂含量等条件, 利用该开管电色谱柱拆分了氨氯地平、 尼莫地平和尼卡地平等10种地平类手性药物对映体. 优化的流动相组成为20 mmol/L NaH₂PO₄(pH=4.0), 含4.0 mmol/L 磺丁基醚-β-环糊精, 乙腈的体积分数为10%~25%, 施加电压15~25 kV, 温度为15 ℃, 电动进样2 kV×5 s, 检测波长为236 nm. 在上述条件下, 分离度(R_S)可达3.62, 柱效达61011块/m, 分析时间一般为6~15 min. 基于色谱分离数据, 探讨了相关的手性分离机理.     

用强阴离子交换毛细管电色谱分离阴离子化合物

对阴离子性化合物在强阴离子交换毛细管电色谱中的保留行为进行了研究。发现样品中固定相上的吸附使样品的保留因子k^*变小,柱小的分离能力减小;而电压的增大,使酸性样品的k^*也增大,并且电压的改变也能改变分离的选择性;样品保留因子的对数值随着缓冲液离子强度的对数值的增大而线性减小;样品也强阴子交换毛细管电谱和毛细管区带电泳中有不同的保留行为。