Azobenzene-bridged calix[8]arenes

An azobenzene bridge was introduced into the lower (or smaller) rim of p-tert-butylcalix[8]arene (1) and 1,5-calix[8]crown-3 (2) to form 1,4-singly bridged (3) and 1,5:3,7-doubly bridged (4) calix[8]arene derivatives, respectively. Trans and cis isomers of conformationally rigid 4 were isolated. The quantum yields of the trans-cis photoisomerisation reactions have been measured.     

Ozonolysis of bis-endo-diacylbicyclo[2.2.1]heptenes in dichloromethane-methanol

Ozonolysis of bis-endo-diacylbicyclo[2.2.1]heptenes 3a-d at −78 °C in dichloromethane-methanol gave the hydroperoxides 6a-d in 70-80% yields. Ozonolysis of bis-endo-diacetylbicyclo[2.2.2]octene 15 and bis-endo-diacetyl-7-oxabicyclo-[2.2.1]heptene 16 under the same reaction conditions gave the hydroperoxides 17 and 18, respectively. The intramolecular sequential nucleophilic addition of the carbonyl groups to the carbonyl oxide group was observed for the first time and was found to be faster than the intermolecular nucleophilic addition of a methanol molecule to the carbonyl oxide group. Ozonolysis of compound 23 in CH₂Cl₂-MeOH at −78 °C followed by reduction with Me₂S gave compounds 24 and 25, in which the stereochemistry of the methoxyl groups was determined by X-ray analysis.     

Glycolic acid-supported cobalt ferrite-catalyzed one-pot synthesis of pyrimido[4,5-b]quinoline and indenopyrido[2,3-d]pyrimidine derivatives

Herein, one-pot synthesis of pyrimido[4,5-b]quinoline and indenopyrido[2,3-d]pyrimidine derivatives was developed by the three-component reaction of aldehydes, 6-amino-1,3-dimethyluracil, and 1,3-dicarbonyl compounds in the presence of glycolic acid-supported cobalt ferrite CoFe₂O₄@SiO₂@Si (CH₂)₃NHCOOCH₂COOH as a novel magnetic catalyst in ethanol at reflux conditions. Glycolic acid-supported cobalt ferrite was characterized via Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), and vibrating sample magnetometer (VSM). Moreover, the catalyst was easily recovered with magnetic separation and recycled at least for five times without significant loss of its catalytic activity. The products were formed in excellent yields over appropriate reaction times under environmentally friendly conditions. The high efficiency and easy isolation of catalyst from products with an external permanent magnet are some of the remarkable advantages of this method.     

An Expedient Synthesis of Novel Derivatives of Pyrido[2,3‐d]pyrimidines Using Magnetically Supported ZrO2 Nanocatalyst

An efficient synthesis of pyrido[2,3‐d]pyrimidine derivatives via one‐pot multicomponent reactions of 6‐amino‐2‐(alkylthio)pyrimidin‐4(3H)‐one, 3‐cyanoacetylindole and arylaldehydes using [Fe₃O₄@ZrO₂] as magnetically recyclable nanocatalyst is reported. This protocol furnished the desired products in good to excellent yields (70–93 %) and lower reaction times. The catalyst could be easily and efficiently separated from the final product solution by an external magnet and be reused in 5 consecutive runs without any significant activity decrease.     

An ultrasound assisted cyclocondensation reaction for the efficient synthesis of [1]benzopyranopyrido[d]pyrimidines using porous graphene/MoO3

In this paper, we report a feasible protocol for the preparation of [1]benzopyranopyrido[d]pyrimidines via expeditious sonochemical route. The reaction efficiency was evaluated by influence of several parameters including sonication power, sonication time, different solvents, and using porous graphene/MoO₃ nanocomposite as catalyst, for the first time. The effect of the ultrasonication comparing with the conventional heating on the synthesis of the titled compounds shows that the ultrasonic irradiation is required to rich the cyclized products. The structural properties of porous graphene/MoO₃ nanocomposite were determined by Fourier transform infrared spectroscopy (FT‐IR), powder X‐ray diffractometry (XRD), scanning electron microscope (SEM), Raman spectroscopy, and also by TGA analysis. Confirmation of the structures of compounds 4a – 4h were also established with IR, ¹H NMR, and ¹³C NMR spectroscopic data and also by elemental analyses.     

New lanthanide-based complexes constructed from cucurbit[6]uril: Synthesis,structures and properties

Three lanthanide-based complexes, {Gd₂(H₂O)₁₀(CB[6])₂}·CB[6]·6Cl·12H₂O (1), {[Gd₂(H₂O)₈CB[6]₂]·(CuCl₄)·4Cl·46H₂O}_n (2), and {Dy₂(NO₃)₂(H₂O)₁₀(CB[6])}·4NO₃·14H₂O (3) (CB[6] = cucurbit[6]uril), were prepared with cucurbit[6]uril (CB[6]). These complexes were characterized by single-crystal X-ray diffraction, elemental analysis, FT-IR spectroscopy, UV–Vis spectroscopy, thermogravimetric analysis and magnetization measurements. Crystallographic results showed that 1 and 3 are dinuclear and crystallize in the triclinic space group Pī, whereas 2 is a 1-D zigzag supramolecular chain that crystallizes in the monoclinic system in C2/c. The results indicated that temperature has a big effect on the supramolecular assemblies and a different structure inducer also leads to the formation of different coordination polymers. Frequency dependence in the ac susceptibility signals was observed in 3.     

Synthesis and characterization of a new pillar[5]arene-based [1]rotaxane

In this study, we reported the synthesis of three kinds of mono-functional pillar[5]arene derivatives PRI, PRII and R and their structures were studied by 1D and 2D NMR spectra and mass spectra. The 2D NMR spectra including ¹H-¹³C HSQC, ¹H-¹H COSY and NOESY spectra indicated that PRI and PRII are both stable self-included pseudo[1]rotaxanes in CDCl₃. These original structures are promising compounds for the design of pillar[5]-based [1]rotaxane. And the results showed that R could exist stable in CDCl₃ and DMSO because of the coordination of N-H?O hydrogen bonding interaction and C-H?π interaction.     

Ring-contraction from benzo[b][1,4]thiazines to benzo[d]thiazolines induced by oxygen

An unexpected ring-contraction from benzo[b]pyrazino[1,2-d][1,4]thiazine-1,4-diones (6) to benzo[4,5]thiazolo[3,2-a]pyrazine-1,4-diones (7) has been developed. The preliminary mechanistic studies showed the transformation contained two independent steps: the first step is the formation of a Michael adduct upon the addition of the protic solvent, in the presence of base, to the C-2-C-3 double bond of compound 6, and the second step is a ring-contraction induced by oxygen via the migration of sulfur atom from C-2 to C-3 position. And its scope is also studied.     

二甲基取代五元瓜环与钾离子和钆离子的配位结构

利用X-射线单晶衍射技术表征了2个二甲基取代五元瓜环(DMeQ[5])与金属离子形成的配合物的晶体结构,2个配合物分别为{[K2(H2O)3DMeQ[5]}I2.5H2O(1)和{[Gd(H2O)3][K(H2O)][(NO3)@DMeQ[5]]}(NO3)3.5H2O(2)。与DMeQ[5]和钆离子形成的配合物的结构不同的是,配合物1和2中每个DMeQ[5]端口的所有羰基氧原子都和钾离子或钆离子配位,形成全封闭结构。     

Syntheses and structural characterization of some mono- and di-p-nitrophenyl[3]ferrocenophanes: X-ray structure of [3]ferrocenophane, 3-p-nitrophenyl[3]ferrocenophane, and 3,4′-bis-(p-nitrophenyl)[3]ferrocenophane; DFT calculations on ferrocene derivatives

[3]Ferrocenophane (3a) reacts in a Gomberg reaction with diazotized p-nitroaniline to give a mixture of mono- and di-substituted products. The isomeric pairs of 3- and 2-(p-nitrophenyl)[3]ferrocenophanes (4 and 5), as well as 3,4′- and 3,4-bis-(p-nitrophenyl)[3]ferrocenophanes (6 and 7) were separated from the mixture by column chromatography on Al₂O₃ and characterized by means of mass, IR, UV, ¹H-NMR spectroscopy, and by X-ray analysis (4 and 6). PM3/tm and density functional theoretical calculations on ferrocene (1) and ferrocenophane derivatives are reported. A refined X-ray structure determination of [3]ferrocenophane (3a) is given.     

Studies on uracils: synthesis of novel pyrido[2,3-d]pyrimidine oxides via ring transformation of isoxazolo[3,4-d]pyrimidine

The reaction of isoxazolo[3,4-d]pyrimidine 1 and cyanoolefins 2 in the presence of triethylamine (Et₃N) as a catalyst afforded an unprecedented one-pot synthesis of biologically important pyrido[2,3-d]pyrimidine oxides 3 in excellent yields.     

Novel pyrrolo[2,3-d]pyrimidine derivatives: Design,synthesis, structure elucidation and in vitro anti-BVDV activity

The progression of drug resistance of viral infection justifies the discovering of new anti-viral agents. Thus, a novel series of pyrrolopyrimidine derivatives 5–7 and 9–18 were designed, synthesized and fully characterized by IR, mass spectroscopy, NMR, and elemental analysis. The structure of 4,6-dichloro-pyrrolo[2,3-d]pyrimidine 10 elucidated by single crystal X-ray diffraction. Herein, we reported the first pyrrolo[2,3-d]pyrimidine compounds with trichloromethane at position 2 of the pyrimidine ring. As initial biological activity screening, evaluation of the pyrrolo[2,3-d]pyrimidine compounds as anti-BVDV (Bovine Viral Diarrhea Virus) was examined. The compounds 11, 13, 16 and 17 exhibited excellent activity as a potent inhibitor against BVDV. Structure activity relationship showed that the pyrrolo[2,3-d]pyrimidine molecules presenting hydrogen atom or trichloromethyl group on C2 and chlorine, sulfur, pyrrolidine or methoxy groups on C4 of the pyrimidine ring showed high activity as anti-BVDV in comparison with the compounds which have Cl or CH₃ on C2 position.     

Light-actuated resorcin[4]arene cavitands

A light-actuated resorcin[4]arene cavitand equipped with two quinone (Q) and two opposite Ru(II)-based photosensitizing walls was synthesized and investigated. The cavitand is capable of switching from an open to a contracted conformation upon reduction of the two Q to the corresponding SQ radical anions by intramolecular photoinduced electron transfer in the presence of a sacrificial donor. The molecular switch was investigated by cyclic and rotating disc voltammetry, UV–Vis–NIR spectroelectrochemistry, transient absorption, NMR, and EPR spectroscopy. This study provides the basis for the development of future light-activated switches and molecular actuating nanodevices.     

Ethynyl[2.2]paracyclophanes and 4-isocyano[2.2]paracyclophane as ligands in organometallic chemistry

An alternative synthesis of (±)-4-ethynyl[2.2]paracyclophane (PCPCCH) (5) and 4,16-diethynyl[2.2]paracyclophane (6) via the Corey-Fuchs reaction has been developed. The olefinic intermediate 4-dibromovinyl[2.2]paracyclophane (3) has been isolated and structurally characterized. The racemic terminal alkyne 5 was employed as starting material for assembling of a luminescent extended π-conjugated system containing a thiophene unit and for a catalytic bis-silylation reaction yielding the olefinic dithioether Z-PhSCH₂Me₂SiC(H)C(PCP)SiMe₂CH₂SPh (9). The dimetallatetrahedran [Co₂(CO)₆(μ-η²-PCP-CCH)] (10) has been prepared and its crystal structure determined by an X-ray diffraction analysis. Alkyne 5 has also been used for the preparation of the Pt(0) complex [Pt(PPh₃)₂(PCPCCH)] (11) and the heterodinuclear dimetallacyclopentenone [(OC)₂Fe{μC(O)C(PCP)C(H)}(μ-dppm)Pt(PPh₃)] (12). The synthesis and reactivity of 4-isocyano[2.2]paracyclophane (15) towards heterobimetallic iron-platinum and palladium-platinum complexes is also presented. Opening of the dative iron → platinum bond of [(OC)₄Fe(μ-dppm)PtCl₂] (16) occurred upon addition of 15 to a CH₂Cl₂ solution of 16 leading to [(OC)₄Fe{μ-dppm}PtCl₂(CNPCP)] (17). Treatment of [ClPd(μ-dppm)₂PtCl] (18) with isocyanide 15 in a 1:1 ratio affords the A-frame compound [ClPd(μ-dppm)₂(μ-CNPCP)PtCl] (19), resulting from formal insertion of 15 into the Pd-Pt bond. Addition of 2 equiv. of 15-18 leads to the ionic A-frame compound [ClPd(μ-dppm)₂(μ-CNPCP)Pt(CNPCP)]Cl (20).     

One‐pot Combinatorial Synthesis of Benzo[4,5]imidazo‐[1,2‐a]thiopyrano[3,4‐d]pyrimidin‐4(3H)‐one Derivatives

A series of novel fused tetracyclic benzo[4,5]imidazo[1,2‐a]thiopyrano[3,4‐d]pyrimidin‐4(3H)‐one derivatives were synthesized via the reaction of aryl aldehyde, 2H‐thiopyran‐3,5(4H,6H)‐dione, and 1H‐benzo[d]imidazol‐2‐amine in glacial acetic acid. This protocol features mild reaction conditions, high yields and short reaction time.     

Three novel bismetallacyclopropa[60]fullerene complexes formed via intermediate monometallacyclopropa[60]fullerene diphosphine ligands

The homodinuclear bismetallacyclopropa[60]fullerene complexes (η²-C₆₀)M(μ-η¹,η¹-trans-Ph₂PCHCH PPh₂)₂M(η²-C₆₀) (1, M = Pt; 2, M = Pd) were prepared by reaction of C₆₀ with M(dba)₂ (dba = dibenzylideneacetone) and trans-1,1′-bis(diphenylphosphino)ethylene in 82% and 92% yield, whereas reaction of C₆₀ with Pd(dba)₂ and trans-dppet followed by treatment with C₆₀ and Pt₂(dba)₃ gave rise to the heterodinuclear complex (η²-C₆₀) Pd(μ-η¹,η¹-trans-Ph₂PCHCH PPh₂)₂Pt(η²-C₆₀) (3) in 65% yield. Mechanistic study showed that these reactions involve the intermediates of monometallacyclopropa[60]fullerene diphosphine ligands (η²-C₆₀)M(η¹-trans-Ph₂PCHCHPPh₂)₂ (4, M = Pt; 5, M = Pd). All the mono- and bismetallacyclopropa[60]fullerene complexes 1-5 have been fully characterized by elemental analysis and spectroscopy, as well as for 2 by X-ray crystallography.     

Phosphite ligands derived from distally and proximally substituted dipropyloxy calix[4]arenes and their palladium complexes: Solution dynamics, solid-state structures and catalysis

Two bisphosphite ligands, 25,27-bis-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (3) and 25,26-bis-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy-p-tert-butyl calix[4]arene (4) and two monophosphite ligands, 25-hydroxy-27-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (5) and 25-hydroxy-26-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy- p-tert-butyl calix[4]arene (6) have been synthesized. Treatment of (allyl) palladium precursors [(η³-1,3-R,R′-C₃H₄)Pd(Cl)]₂ with ligand 3 in the presence of NH₄PF₆ gives a series of cationic allyl palladium complexes (3a-3d). Neutral allyl complexes (3e-3g) are obtained by the treatment of the allyl palladium precursors with ligand 3 in the absence of NH₄PF₆. The cationic allyl complexes [(η³-C₃H₅)Pd(4)]PF₆ (4a) and [(η³-Ph₂C₃H₃)Pd(4)]PF₆ (4b) have been synthesized from the proximally (1,2-) substituted bisphosphite ligand 4. Treatment of ligand 4 with [Pd(COD)Cl₂] gives the palladium dichloride complex, [PdCl₂(4)] (4c). The solid-state structures of [{(η³-1-CH₃-C₃H₄)Pd(Cl)}₂(3)] (3f) and [PdCl₂(4)] (4c) have been determined by X-ray crystallography; the calixarene framework in 3f adopts the pinched cone conformation whereas in 4c, the conformation is in between that of cone and pinched cone. Solution dynamics of 3f has been studied in detail with the help of two-dimensional NMR spectroscopy.The solid-state structures of the monophosphite ligands 5 and 6 have also been determined; the calix[4]arene framework in both molecules adopts the cone conformation. Reaction of the monophosphite ligands (5, 6) with (allyl) palladium precursors, in the absence of NH₄PF₆, yield a series of neutral allyl palladium complexes (5a-5c; 6a-6d). Allyl palladium complexes of proximally substituted ligand 6 showed two diastereomers in solution owing to the inherently chiral calix[4]arene framework. Ligands 3, 6 and the allyl palladium complex 3f have been tested for catalytic activity in allylic alkylation reactions.     

Synthesis,Antibacterial, and Antifungal Activities of Imidazo[2,1-c][1,2,4]triazoles and 1,2,4-Triazolo[4,3-a]pyrimidinones

A straightforward method has been developed for the synthesis of 1-phenyl-imidazo [2,1-c][1,2,4]triazole derivatives 5a–j and 1-phenyl-[1,2,4]triazolo[4,3-a]pyrimidinones derivatives 6a–g starting from 5-amino-1-phenyl[1,2,4]triazole and p-toluenesulfonic acid (PTSA). This methodology affords a number of 1-phenyl-imidazo [2,1-c][1,2,4]triazoles 5a–j and 1-phenyl-[1,2,4]triazolo[4,3-a]pyrimidinones 6a–g in reasonable yields and short reaction times. The structures of all new compounds were elucidated using infrared, ¹H and ¹³C NMR, and high-resolution mass spectrometry. Some of the newly synthesized compounds were screened for their antimicrobial activity.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications ^® for the following free supplemental resource(s): Full experimental and spectral details.]     

Synthesis and self-assembly of novel calix[4]arenocrowns: formation of calix[4]areno[2]catenanes

A series of novel calix[4]arenocrowns 1a-c were efficiently synthesized by a one-pot reaction of calix[4]monohydroquinone diacetate 5 with ditosylate 6 and its analogues in the presence of sodium hydroxide. It was found that the calix[4]arenocrowns could form stable pseudorotaxane-type complexes 2a-c with paraquat, and further self-assemble into calix[4]areno[2]catenanes 3a-c with dicationic salt 8 and p-bis(bromomethyl)benzene.     

Novel thiophene-substituted tetrathia[22]annulenes[2,1,2,1]: synthesis,physical properties,and improvement in field-effect behavior

Novel conjugated macrocycles, thiophene-substituting tetrathia[22]annulenes[2,1,2,1] (TTAs, and 5b), were synthesized through a convenient four-step procedure. They were evidenced to have high aromaticity by NMR, UV–vis absorption spectra, and calculation. Their UV–vis absorption spectra, thermal stability, electrochemical properties, thin film morphology were studied and the field-effect transistors based on 5a and 5b through a vapor deposition method performed good with reproducible bulk-like carrier mobilities (as high as 0.53 cm² V⁻¹ S⁻¹) and high on/off ratios (as high as 9.0×10⁵), which was among the best records in this series.