Synthesising injectable molecular self-curing polymer from monomer derived from lignocellulosic oil palm empty fruit bunch biomass: A review on treating Osteoarthritis

Osteoarthritis (OA) is a chronic and irreversible degenerative joint disease that most commonly affects individuals in their forties and fifties worldwide due to the continuously increasing life expectancy. Although joint replacement is an effective remedy for severe end-stage OA, the functional outcomes could be unsatisfactory, while the implants might have a limited lifespan. Due to the drawbacks and limitations of the joint replacement approach, bone Tissue Engineering (TE) is one of the promising bone tissue regeneration technologies that aid in cartilage repair and regeneration and has attracted the attention of experts. The advanced development of biopolymers, in particular biopolymer derived from Oil Palm Empty Fruit Bunch (OPEFB), has been utilised in the fabrication of scaffolds that serve as a crucial component in bone TE. The abundant supply of OPEFB biomass and the increasing trend of converting waste into wealth for environmental sustainability have also provided the opportunity and interest to fully apply biopolymer-derived materials for bone scaffolding and other applications. Therefore, this paper aimed to provide a review of the biopolymers derived from OPEFB for the treatment of OA and other related applications. A brief overview of the biomass sources in Malaysia was presented, followed by a discussion on the chemical compositions and pre-treatment methods of OPEFB by using organosolv pre-treatment and enzymatic hydrolysis for maximum glucose recovery, monomer derived from cellulose OPEFB and synthesizing self-curing polymer scaffold. Additionally, a detailed review of the polymeric biomaterials in bone TE for the fabrication of scaffolds were included in this review. Most importantly, the paper described the potential use of injectable polymeric biomaterials that provide a significant benefit in orthopaedic applications. Overall, this paper provides a perspective on the potential of OPEFB-derived injectable scaffolds as an alternative OA treatment and future bone TE applications.     

Paramagnetic surface active ionic liquids: synthesis,properties, and applications

Paramagnetic surface active ionic liquids (PMSAILs) classify task-specific ionic liquids with magnetic properties by incorporating metal into the cationic or anionic part of the ionic liquid. Paramagnetic ionic liquids had long-chain either in cations or anions and showed excellent surface activity and magnetic properties without any need for the magnetic nanoparticles. These PMSAILs have inherent unique ionic liquid properties and self-assembled into various nano-aggregates such as micelles, vesicles, rod-like micelles, and etc., by modification in the structure of cations or anions. PMSAILs provide stimuli-responsive properties, which is one of the essential aspects of targeted applications. The appropriate functional tunability of anions and cations in PMSAILs leads to various multifaceted chemical and biological applications. A new emerging trend in PMSAIL research is hybridization with flexible materials. This review will mainly deal with the synthesis, characterization, and brief history of PMSAILs and their potential advantages in the various applications in micellar catalysis, purification and separation of biomolecules, compaction and decompaction of DNA, drug delivery, and other biomedical applications.     

Atomic layer deposition: An efficient tool for corrosion protection

Atomic layer deposition (ALD) is now a widely implemented thin film growing method. It is currently used in industrial fabrication processes of microelectronics and luminescent display technologies. Since compact and conformal films can be grown with perfect control of the thickness, ALD is envisioned in numerous other applications fields such as energy, sensing, biomaterials, and photonics. Although few reports can be found on its application to corrosion protection, it has been shown that the qualities of ALD can be highly beneficial to this field. After a brief review of the principle of ALD and the effect of the main parameters on the properties of the films, this report attempts to show the interest of this technique to mitigate corrosion. Various examples of successful uses of ALD to protect metallic and non-metallic surfaces in different fields are reviewed.     

Nanoparticles: Properties,applications and toxicities

This review is provided a detailed overview of the synthesis, properties and applications of nanoparticles (NPs) exist in different forms. NPs are tiny materials having size ranges from 1 to 100 nm. They can be classified into different classes based on their properties, shapes or sizes. The different groups include fullerenes, metal NPs, ceramic NPs, and polymeric NPs. NPs possess unique physical and chemical properties due to their high surface area and nanoscale size. Their optical properties are reported to be dependent on the size, which imparts different colors due to absorption in the visible region. Their reactivity, toughness and other properties are also dependent on their unique size, shape and structure. Due to these characteristics, they are suitable candidates for various commercial and domestic applications, which include catalysis, imaging, medical applications, energy-based research, and environmental applications. Heavy metal NPs of lead, mercury and tin are reported to be so rigid and stable that their degradation is not easily achievable, which can lead to many environmental toxicities.     

Synthetic electrically driven colloids: A platform for understanding collective behavior in soft matter

The collective motion of synthetic active colloids is an emerging area of research in soft matter physics and is important both as a platform for fundamental studies ranging from non-equilibrium statistical mechanics to the basic principles of self-organization, emergent phenomena, and assembly underlying life, as well as applications in biomedicine and metamaterials. The potentially transformative nature of the field over the next decade and beyond is a topic of critical research importance. Electrokinetic active colloids represent an extremely flexible platform for the investigation and modulation of collective behavior in active matter. Here, we review progress in the past five years in electrokinetic active systems and related topics in active matter with important fundamental research and applicative potential to be investigated using electrokinetic systems.     

Traditional uses,phytochemistry, pharmacology and other potential applications of Vitellaria paradoxa Gaertn. (Sapotaceae): A review

Vitellaria paradoxa Gaertn. is a multipurpose medicinal plant of the family Sapotaceae, and it has been widely used usually in the clinical traditional medicine as remedy for a wide range of diseases for several decades. In addition, the plant has also found applications in confectionery, cosmetics and soaps, and pharmaceuticals both locally and internationally. V. paradoxa, which has been identified with >150 phytoconstituents, is rich in oleanane-type triterpene acids and glycosides, such as paradoxosides A-E, tieghemelin A, parkiosides A-C, bassic acid, as well as flavonoids such as quercetin and catechin-type compounds. The extracts and the active constituents of V. paradoxa have been investigated for various pharmacological activities, including but not limited to anticancer, melanogenesis-inhibitory, antibacterial, anti-diabetic, antioxidant, anti-inflammatory, anti-diarrhoeal, and antifungal activities. Additionally, V. paradoxa has also been utilized in nanoparticles (NPs) synthesis. These NPs among other things have shown significant antinociceptive and antiedematogenic activities as well as environmental friendly adsorptive properties for the removal of pollutants from pharmaceutical effluents. Overall, this review comprehensively examines the traditional uses, phytochemistry, pharmacology, toxicology, clinical studies, and nanoparticles synthesized from V. paradoxa and their applications.     

Photocatalytic and antifouling properties of TiO2-based photocatalytic membranes

Photocatalysis has been extensively studied due to its potential ability to avoid the excessive use of chemical reagents and reduce the energy consumption by employing solar energy. Moreover, to alleviate the reduction in the membrane permeation selectivity, separation efficiency, and membrane service life caused by the emerging micro-pollutants and membrane fouling, membrane technology is often coupled with microbial, electrochemical, and catalytic processes. However, although physical/chemical cleaning and membrane module replacement can overcome the inherent limitations caused by membrane fouling and other membrane separation processes, high operating costs limit their practical applications. In this review, common preparation methods for TiO₂ photocatalytic membranes are described in detail, and the main approaches to enhancing their photocatalytic performance are discussed. More importantly, the mechanism of the TiO₂ photocatalytic membrane antifouling process is elucidated, and some applications of photocatalytic membranes in other areas are described. This review systematically outlines future research directions in the field of photocatalytic membrane modification, including metal and non-metal doping, fabrication of heterojunction structures, control over reaction conditions, increase in hydrophilicity, and increase in membrane porosity.     

Combining plant and dairy proteins in food colloid design

The use of plant proteins to design colloidal food systems is a hot topic in the current context of the protein transition. However, replacing animal-derived proteins (in particular, dairy proteins) that have been traditionally used for this purpose by plant proteins is a challenge from various perspectives, and in particular, because of drastically different solubility and functionality. A possible route to mitigate these issues is to combine plant and dairy proteins, providing that their interactions can be understood from the molecular to the macroscopic scale. This review addresses the major advances that have occurred in the field of such blend-based systems, all the way from their behaviour in aqueous dispersions to their potential applications in gels, foams and emulsions.     

Phytogenic fabrication of iron oxide nanoparticles and evaluation of their in vitro antibacterial and cytotoxic activity

Several metal-based nanoparticles (NPs) have been found to be toxic and are known to exert adverse health outcomes with irreversible side effects. This highlights the need to discover effective, stable, and biocompatible therapeutic components using natural sources. Here, a hexane extract of Nigella sativa seeds was used to synthesize iron oxide NPs (NS-IONPs) embedded with N. sativa phytoconstituents. The extract acted as a reducing agent that restricted the size of the NS-IONPs to 5–6 nm, signifying the potential to be cleared through the renal system. The fabricated NS-IONPs had a prominent effect on pathogenic gram-negative bacteria, E. coli (19.3 mm) and Salmonella typhi (14.2 mm) and lung cancer cells (lowest IC₅₀ of 18.75 µg/mL) mainly by binding to the phospholipid components of the cell membrane. This resulted in cell shrinkage and further inhibited cell growth. Transmission electron microscopy analyses revealed that the mechanisms of cellular NP uptake varied depending on the cell type. Accumulation of NS-IONPs inside the cell increased BAX expression and arrested the cells at the G0/G1 phase, thereby conspicuously extending the G0 phase to initiate necrosis. Thus, these finding suggest that the synthesized NS-IONPs exhibited high antibacterial activity and effective cytotoxicity against cancer cell lines A549 and HCT116 compared to IONPs. The innovation of the current study is that the biogenic fabrication of IONPs is simple and cost effective results in stable nanomaterial, NS-IONPs with potential antibacterial and anticancer activity, which can be explored furthermore for various biomedical applications.     

Paper-based diagnostic platforms and devices

Paper-based analytical devices have become lately “must have” components in equipment and instrumental designed for point-of-care applications, especially when they are used in tandem with microfluidic platforms. Nowadays, paper-based electrochemical devices (PEDs) represent the first choice in the development of lab-on-a-chip biosensors because of their benefits in biomedical diagnosis in terms of simplicity, affordability, portability, and disposability. Moreover, cellulose is a biodegradable and biocompatible substrate, ideal for building disposable devices for use in remote locations or low-resource settings. Despite their low costs and simplicity, PEDs must face a tough challenge—meeting the affordable, sensitive, specific, user-friendly, rapid and robust, equipment-free, and deliverable to end users criteria. The latest achievements in microfluidic PEDs for clinical diagnosis will be critically discussed, putting emphasis on innovative assay formats and methods for surface modification.     

Insights into recent advances of chitosan-based adsorbents for sustainable removal of heavy metals and anions

With globally increased human population and industrialization, the natural sources of water are reduced and then contaminated. Therefore, development of advanced technologies for the efficient water treatment is becoming of the scope of each of the nation. One of the cost-effective and well-known technologies for wastewater treatment is adsorption of contaminants by natural biopolymer like chitosan (CS) due to its unique features such as availability, biodegradability, biocompatibility, eco-friendly and low-cost production. However, Cs suffers considerable limitations such as low adsorption capacity, low surface area and limited reusability. Thence, this review intended to provide an overview for recent advances of chitosan-based adsorbents that established better adsorption activities towards various hazard heavy metals, including: As(III), As(V), Cu(II), Cr(VI), Pb(II) and Cd(II) ions. In addition, the capabilities of chitosan-based adsorbents for the adsorptive removal of anions including phosphates and nitrates were discussed. Besides, the suggested adsorption mechanisms of these contaminants onto chitosan-based adsorbents and the research conclusions for the optimum conditions of the adsorption processes were explained in light of the currently reported studies. Furthermore, to emphasize the foremost research gaps and future potential trends that could inspire further researchers to find out the best solutions for water treatment problems.     

Biological activities from andiroba (Carapa guianensis Aublet.) and its biotechnological applications: A systematic review

Carapa guianensis is a tree from Meliaceae family traditionally known as andiroba that has a wide range of biological properties, including therapeutic effects, antioxidant activities, insecticidal and repellent effects that can be used in biotechnological approaches to medicine, agriculture, and cosmetic products. Therefore, we aim to explore the biological activities exhibited by this species and their respective biotechnological applications of interest. For this, a systematic review was carried out following the PRISMA guidelines dated from 1993 to 2022 through the Scopus, Web of Science and Agricultural Research Database (Base de Dados da Pesquisa Agropecuária - BDPA), screened for biological activity/bioactive compounds. A total of 129 studies were included in the PRISMA flow analysis. Biological properties and major bioactive compounds, as well as biotechnological approaches could be identified. The biological activity from C. guianensis could be observed in different vegetative parts through diverse methods of extractions. These activities are mainly due to the unsaturated fatty acids and bioactive compounds, such as the limonoids and a small fraction of phenolic compounds. Gedunin-type limonoids, like gedunin and its derivatives, represent the class of compounds that show the highest bioactivities in different applications.     

Colloidal chemistry as a guide to design intended dispersions of carbon nanomaterials

In this review, some established concepts from Colloidal Science and their application to graphene and carbon nanotubes dispersions in organic or aqueous media are highlighted to rationalize alternatives for some issues in terms of colloidal properties. Recent applications for carbon-based dispersions are presented, as well as van der Waals interactions in carbon materials and strategies to overcome these interactions, such as increasing electrostatic repulsion between dispersed particles, surface functionalization, or adsorption of passivation agents such as macromolecules, which are the basis of many dispersion and exfoliation procedures. The demonstration of how knowledge and fine control of colloidal interactions have been used to overcome several limitations, such as the preparation of stable and concentrated dispersions of carbon materials and keeping appreciable electrical conductivity, is presented. It is also showed that the same knowledge can help the development of more environmentally friendly carbon-based colloids as well as the improvement of similar systems as dispersions of two-dimensional materials.     

Light-assisted and remote delivery of carbon monoxide to malignant cells and tissues: Photochemotherapy in the spotlight

The recent discovery of the salutary effects of carbon monoxide (CO) in chronic obstructive pulmonary disease (COPD), ischemic perfusion damage, graft implantation, as well as its pro-apoptotic effects on hyper-proliferating cells has raised interest in delivering small doses of CO to biological targets under controlled conditions. In such attempts, photoactive metal carbonyl complexes (photoCORMs) have shown promise and several accounts of cancer cell eradication with light-triggered CO release from photoCORMs have been reported. CO releasing molecules (CORMs) and photoCORMs have been incorporated within biocompatible drug delivery vehicles such as carboxymethyl chitosan or mesoporous silica-based nanoparticles and the composite materials (photoCORs) have been successfully employed in controlled CO delivery to cancer cells to cause rapid CO-induced apoptosis. Fiber optic technology has also been utilized for remote delivery of CO to not easily accessible targets. Reports on all these therapeutic modalities for on-demand CO delivery to malignant targets in a highly localized fashion have opened up the possibility of phototherapy of cancer with the use of an unusual so-called “toxic” molecule. This review highlights the methodologies used in CO photochemotherapy reported so far along with analysis of their therapeutic outcomes, and possible improvements for better applicability.     

Preparation of carbon-aerogel polypyrrole composite for desalination by hybrid capacitive desalination method

Capacitive Deionization (CDI) is an emerging technology with great potential applications. Most researchers view it as a viable water treatment alternative to reverse osmosis. This research reports the preparation and application of a carbon aerogel polypyrrole (CA-PPy) composite for the desalination of NaCl solution by the hybrid CDI method. The carbon aerogel (CA) was prepared from a Resorcinol / Formaldehyde precursor by the sol–gel method. The aerogel obtained from the sol–gel was then pyrolysed in a tube furnace to form CA. Polypyrrole (PPy) was prepared by the Oxidative chemical polymerisation of pyrrole, ferric chloride hexahydrate (oxidant), and sodium dodecyl sulfate (dopant). A composite of CA and PPy was then prepared and used to modify carbon electrodes. The CA-PPy composite was characterised to verify its composition, morphology, thermal properties, and functional groups. The electrochemical properties of the material were determined by Cyclic voltammetry (CV) and Electrochemical impedance spectroscopy (EIS) tests. The electrochemical tests were done using a GAMRY potentiostat electrochemical workstation, a 1.0 M KCl was used as the electrolyte, and the applied potential window was (-0.2 to + 0.6) V for the CV test. The EIS test was done with the same concentration of KCl electrolyte at an applied potential of 0.22 V and at a frequency range of (0.1 – 100, 000) Hz. The optimal specific capacitance of the CA is 115F/g, and that of the composite is 360.1F/g, they were both obtained at a scan rate of 5 mV/s. The CDI desalination study of the CA-PPy composite showed a salt adsorption capacity (SAC) of 10.10 mg/g (300 mg/L NaCl solution) – 15.7 mg/g (800 mg/L NaCl solution) at 1.2 V applied voltage. The salt recovery efficiency of the electrode material in the 300 mg/L solution is 27 %, in the 500 mg/L solution, it is 20.12 %, and in the 800 mg/L solution, it is 15.41 %. The electrode material also showed good electrochemical stability after nine cycles of ion adsorption/desorption study.     

Ionic liquid–modified cellulosic hydrogels for loading and sustained release of selenourea: an ensuing inhibition of tyrosinase activity

Cellulose-based hydrogel materials were prepared and modified with tannic acid and l-methionine using ionic liquid as the solvent. The gels were prepared to develop a sustained release medium for selenourea (SeU). The drug delivery characteristics of selenourea-loaded cellulose (CSeU), selenourea-loaded tannic acid-modified cellulose (CTSeU), and selenourea-loaded L-methionine-modified cellulose (CMSeU) were investigated in aqueous media and simulated gastric fluid (SGF) media. This modified gel beads have been characterized using field emission scanning electron microscope, X-ray energy-dispersive spectroscopy, Fourier transform infrared spectroscopy, thermogravimetry–differential thermal analysis and swelling properties and compared with those of the unmodified ones. We also investigated the inhibitory effects of SeU released from these gels on the activity of mushroom tyrosinase. Out of all the gel materials, CTSeU showed maximum SeU release both in water and SGF media. However, tyrosinase inhibitory action in PBS medium was comparable for all the three gel materials.     

Recent progress in MXene and graphene based nanocomposites for microwave absorption and electromagnetic interference shielding

There is widespread use of telecommunication and microwave technology in modern society, and raised the electromagnetic interference (EMI) issue to alarming situation due to apprehensive demand and growth of 5G technology undesirably disturbing the human health. The two dimensional (2D) materials including graphene and MXenes are already been used for variety of electronic devices due to their exceptional electrical, mechanical, optical, chemical, and thermal properties. MXene is composed of metal carbides, in which mainly metals are the building blocks for dielectrics, semiconductors, or semimetals. However, the strong interfaces with electromagnetic waves (EM) are variable from terahertz (THz) to gigahertz (GHz) frequency levels and are widely used in EMI and Microwave absorption (MA) for mobile networks and communication technologies. The use of different organic materials with metal, organic, inorganic fillers, polymers nanocomposite and MXene as a novel material has been studied to address the recent advancement and challenges in the microwave absorption mechanism of 2D materials and their nanocomposites. In this concern, various techniques and materials has been reported for the improvement of shielding effectiveness (SE), and theoretical aspects of EMI shielding performance, as well stability of 2D materials particularly MXene, graphene and its nanocomposites. Consequently, various materials including polymers, conducting polymers, and metal–organic frameworks (MOF) have also been discussed by introducing various strategies for improved MA and control of EMI shieling. Here in this comprehensive review, we summarized the recent developments on material synthesis and fabrication of MXene based nanocomposites for EMI shielding and MA. This research work is a comprehensive review majorly focuses on the fundamentals of EMI/MA.  The recent developments and challenges of the MXene and graphene based various structures with different polymeric composites are described in a broader perspective.     

Incorporations of gold,silver and carbon nanomaterials to kombucha-derived bacterial cellulose: Development of antibacterial leather-like materials

Bacterial cellulose (BC), derived from kombucha scoby have extraordinary organoleptic properties suitable for development of leather-like materials. An improvement in physical and mechanical property is desirable for the practical applications. This work deals with the treatment of BC by incorporations of three different nanomaterials such as gold nanoparticles (AuNP), silver nanoparticles (AgNP) and graphene oxide (GO). Achieving combined benefits via synergic interactions of different nanomaterials is the major objective herein. While graphene oxide can influence some of the parameters related to mechanical properties, silver nanomaterials can offer antibacterial characteristics. Gold nano materials can bridge the BC/silver/graphene oxide as well as provide the desirable aesthetic colour. Different physical chemical and mechanical characteristics were studied in detail. For example, changes in morphology by imaging fiber network were studied using scanning electron microscopy. Fibre properties were studied by Small Angle X-Ray Scattering (SAXS) and X-Ray Diffraction (XRD). Elemental composition was studied by X-ray photoelectron spectroscopy (XPS) analysis and Raman analysis. The improvement of hydrophobicity was studied by Contact angle meter. Thermal analysis was performed using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). A Picture was provided in ESI to show the modified material's leather-like appearances.     

Stimuli-responsive microemulsions: State-of-the-art and future prospects

Over the last decade, stimuli-responsive microemulsions, that is, those that switch between stable and unstable states in response to certain stimuli, have attracted considerable attention because of their unique properties and potential for diverse applications. Herein, we highlight the recent advances in the development of microemulsions responsive to external triggers such as pH, redox reactions, light, CO₂ gas, magnetic field and temperature; discuss the corresponding responses; and reveal important composition–microstructure–macroscopic property relationships to suggest future research directions and potential applications.