Synthesis of dicarboxylate oligosaccharide multilayer terminal functionality upon poly(lysine) dendrimer scaffolding

A reactive three‐layered dendrimer containing carboxyl groups was synthesized by the coupling of dicarboxylic acid and a highly reactive, two‐layered glycopeptide dendrimer. Lactose, maltose, or maltotriose was reacted with the poly(lysine) dendrimer in its third and fourth generations by reductive amination and afforded two‐layered glycolysine dendrimers. The reaction was conducted in a borate buffer (pH 9.0). ¹H NMR, ¹³C NMR, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry analyses were applied for the determination of the structures of the products. When an excess amount of the oligosaccharide and a long reaction time were used, the degree of substitution increased to 1.5–2.0 against an amino group. For the preparation of highly reactive, multilayered dendrimers for an antigen carrier, C6 hydroxy groups of the oligosaccharides were selectively esterified by adipic acid and suberic acid to give 6‐O‐adipoyl oligosaccharide–poly(lysine) dendrimers and 6‐O‐suberoyl oligosaccharide–poly(lysine) dendrimers. The reactivity of these multilayered dendrimers was examined by a model reaction with phenylalanine ethyl ester. The dendrimer showed high reactivity, providing phenylalanine ethyl ester–dicarboxylate oligosaccharide–poly(lysine) dendrimers with a considerably high proportion of phenylalanine residues. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3622–3633, 2002     

Synthesis,characterization, and thermal properties of dendrimer‐star,block‐comb copolymers by ring‐opening polymerization and atom transfer radical polymerization

Novel and well‐defined dendrimer‐star, block‐comb polymers were successfully achieved by the combination of living ring‐opening polymerization and atom transfer radical polymerization on the basis of a dendrimer polyester. Star‐shaped dendrimer poly(?‐caprolactone)s were synthesized by the bulk polymerization of ?‐caprolactone with a dendrimer initiator and tin 2‐ethylhexanoate as a catalyst. The molecular weights of the dendrimer poly(?‐caprolactone)s increased linearly with an increase in the monomer. The dendrimer poly(?‐caprolactone)s were converted into macroinitiators via esterification with 2‐bromopropionyl bromide. The star‐block copolymer dendrimer poly(?‐caprolactone)‐block‐poly(2‐hydroxyethyl methacrylate) was obtained by the atom transfer radical polymerization of 2‐hydroxyethyl methacrylate. The molecular weights of these copolymers were adjusted by the variation of the monomer conversion. Then, dendrimer‐star, block‐comb copolymers were prepared with poly(L ‐lactide) blocks grafted from poly(2‐hydroxyethyl methacrylate) blocks by the ring‐opening polymerization of L ‐lactide. The unique and well‐defined structure of these copolymers presented thermal properties that were different from those of linear poly(?‐caprolactone). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6575–6586, 2006     

Sequential functionalization of janus‐type dendrimer‐like poly(ethylene oxide)s with camptothecin and folic acid

Janus‐type dendrimer‐like poly(ethylene oxide)s (PEOs) of 1st, 2nd, and 3rd generation carrying terminal hydroxyl functions on one side and cleavable ketal groups on the other were used as substrates to conjugate folic acid as a folate receptor and camptothecin (CPT) as a therapeutic drug in a sequential fashion. The conjugation of both FA and CPT was accomplished by “click chemistry” based on the 1,3 dipolar cycloaddition coupling reaction. First, the hydroxyl functions present at one face of Janus‐type dendrimer‐like PEOs were transformed into alkyne groups through a simple Williamson‐type etherification reaction. Next, the ketals carried by the other face of the dendrimer‐like PEOs were hydrolyzed, yielding twice as many hydroxyls which were subsequently subjected to an esterification reaction using 2‐bromopropionic bromide. Before substituting azides for the bromide of 2‐bromopropionate esters just generated in the presence of NaN₃, an azido‐containing amidified FA derivative was reacted through click chemistry with alkyne functions introduced on the other face of the dendrimer‐like PEOs. A purposely designed alkyne‐functionalized biomolecule derived from CPT was conjugated to the azido functions carried by the dendritic PEOs by a second “click reaction.” In this case, twice as many CPT as FA moieties were finally conjugated to the two faces of the Janus‐type dendrimer‐like PEOs, the numbers of folate and CPT introduced being 2 and 4, 4 and 8, and 8 and 16 for samples of 1st, 2nd, and 3rd generation, respectively (route A). An alternate route for functionalizing the dendrimer‐like PEO of 1st generation consisted, first, in conjugating the azido‐containing CPT onto the alkyne groups present on one face of the dendritic PEO scaffold. The alkyne‐functionalized FA was further introduced by click chemistry after the bromides of 2‐bromopropionate esters were chemically transformed into azido groups. The corresponding prodrug thus contains 2 CPT and 4 FA external moieties (route B). Every reaction step product was thoroughly characterized by ¹H NMR spectroscopy. A preliminary investigation into the water solution properties of these functionalized dendritic PEOs is also presented. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

SiO2–poly(amidoamine) dendrimer inorganic/organic hybrids

SiO₂–poly(amidoamine) (PAMAM) dendrimer hybrids were synthesized via (1) a Michael addition reaction between the dendrimer and 3‐(trimethoxysilyl) propyl acrylate, (2) the dissolution of the formed compound in methanol, and (3) the mixing of the latter solution with a methanol solution of partly hydrolyzed tetraethylorthosilicate (TEOS) and its casting on a glass substrate. ¹H NMR indicated that in the first step, 77% of the secondary amines were converted into tertiary amines when the fourth‐generation dendrimer was employed and 46% were converted when the second‐generation dendrimer was used. The final SiO₂–PAMAM dendrimer hybrids were obtained via the hydrolysis and condensation of the compound obtained via the Michael addition and the methanol solution of partly hydrolyzed TEOS. The compartmentalized structure of the hybrids due to the compartments of the dendrimers could be controlled by changing the dendrimer and the amount of TEOS. Scanning electron microscopy and transmission electron microscopy micrographs provided information about the structure of the hybrids. Like the PAMAM dendrimer, the SiO₂–PAMAM dendrimer hybrids exhibited a high metal ion complexing capacity because of the presence of the compartments of the dendrimer; they can be, however, much more easily handled, and, as demonstrated by thermogravimetric experiments, have much higher thermal resistance. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1443–1449, 2000     

Synthesis,characterization, and properties of tunable thermosensitive amphiphilic dendrimer‐star copolymers with Y‐shaped arms

Novel and well‐defined amphiphilic dendrimer‐star copolymer poly(ε‐caprolactone)‐block‐(poly(2‐(2‐methoxyethoxy)ethylmethacrylate‐co‐oligo(ethylene glycol) methacrylate))₂ with Y‐shaped arms were synthesized by the combination of ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP). The investigation of thermal properties and the analysis of crystalline morphology indicate that the high‐branched structure of dendrimer‐star copolymers with Y‐shaped arms and the presence of amorphous P(MEO₂MA‐co‐OEGMA) segments together led to the complete destruction of crystallinity of the PCL segments in the dendrimer‐star copolymer. In addition, the hydrophilicity–hydrophobicity transition of the dendrimer‐star copolymer film can be achieved by altering the external temperatures. The amphiphilic copolymers can self‐assemble into spherical nanomicelles in water. Because the lower critical solution temperature of the copolymers can be adjusted by varying the ratio of MEO₂MA and OEGMA, the tunable thermosensitive properties can be observed by transmittance, dynamic laser light scattering, and transmission electron microscopy (TEM). The release rate of model drug chlorambucil from the micelles can be effectively controlled by changing the external temperatures, which indicates that these unique high‐branched amphiphilic copolymers have the potential applications in biomedical field. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of an oligosaccharide–polylysine dendrimer with reducing sugar terminals leading to acquired immunodeficiency syndrome vaccine preparation

A novel cellobiose–polylysine dendrimer with reducing sugar terminals was synthesized in which the reactive reducing end of a disaccharide cellobiose was directing outward. Hexa‐O‐benzyl‐4′‐(1‐carboxyethyl)‐cellobioside (HBCEC) was synthesized through the reaction of a 4′‐hydroxyl group of benzyl hexa‐O‐benzyl‐cellobioside with methyl 2‐chloropropionate, followed by the removal of the methyl ester group. HBCEC was reacted with polylysine dendrimer generation 3 (G3) to produce benzylated cellobiose–polylysine dendrimer G3. After debenzylation, a cellobiose–polylysine dendrimer G3 was obtained in which the reducing end of the cellobiose was the terminal group of the dendrimer. For the preparation of a dendrimer‐type acquired immunodeficiency syndrome vaccine, the cellobiose–polylysine dendrimer was reacted with a tripeptide (glycyl–prolyl–leucine) and a cyclic oligopeptide from the human immunodeficiency virus by reductive amination; this produced a tripeptide‐bound cellobiose–polylysine dendrimer and an insoluble compound, respectively. The structure analysis was carried out with NMR and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2195–2206, 2005     

Structural analysis of poly(amidoamine) dendrimer immobilized in crosslinked poly(ethylene glycol)

Polymeric membranes comprised of poly(amidoamine) (PAMAM) dendrimer immobilized in a poly(ethylene glycol) (PEG) network exhibit an excellent CO₂ separation selectivity over H₂. The CO₂ permeability increases with PAMAM dendrimer concentration in the polymeric membrane and becomes 500 times greater than H₂ permeability when the dendrimer content was 50 wt % at ambient conditions (5 kPa of CO₂ partial pressure). However, the detailed morphology of the membrane has not been discussed. The immiscibility of PAMAM dendrimer and PEG matrix results in phase separation, which takes place in a couple of microns scale. Especially, laser scanning confocal microscope captures a 3D morphology of the polymeric blend. The obtained 3D reconstructions demonstrate a bicontinuous structure of PAMAM dendrimer‐rich and PEG‐rich phases, which indicates the presence of PAMAM dendrimer channel penetrating the polymeric membrane, and CO₂ will preferentially pass through the dendrimer channel. In addition, Fourier transform of the 3D reconstructions indicates the presence of a periodic structure. An average size of the dendrimer domain calculated is 2–4 μm in proportion to PAMAM dendrimer concentration. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Dendrimer‐star polymer and block copolymer prepared by reversible addition‐fragmentation chain transfer (RAFT) polymerization with dendritic chain transfer agent

A new reversible addition‐fragmentation chain transfer (RAFT) agent, dendritic polyester with 16 dithiobenzoate terminal groups, was prepared and used in the RAFT polymerization of styrene (St) to produce star polystyrene (PSt) with a dendrimer core. It was found that this polymerization was of living characters, the molecular weight of the dendrimer‐star polymers could be controlled and the polydispersities were narrow. The dendrimer‐star block copolymers of St and methyl acrylate (MA) were also prepared by the successive RAFT polymerization using the dendrimer‐star PSt as macro chain transfer agent. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6379–6393, 2005     

Viscoelastic properties and phase behavior of 12‐tert‐butyl ester dendrimer/poly(methyl methacrylate) blends

This study used refractometry, ultraviolet–visible spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and dielectric analysis to assess the viscoelastic properties and phase behavior of blends containing 0–20% (w/w) 12‐tert‐butyl ester dendrimer in poly(methyl methacrylate) (PMMA). Dendritic blends were miscible up through 12%, exhibiting an intermediate glass‐transition temperature (T_g; α) between those of the two pure components. Interactions of PMMA C?O groups and dendrimer N? H groups contributed to miscibility. T_g decreased with increasing dendrimer content before phase separation. The dendrimer exhibited phase separation at 15%, as revealed by Rayleigh scattering in ultraviolet–visible spectra and the emergence of a second T_g in dielectric studies. Before phase separation, clear, secondary β relaxations for PMMA were observed at low frequencies via dielectric analysis. Apparent activation energies were obtained through Arrhenius characterization. A merged αβ process for PMMA occurred at higher frequencies and temperatures in the blends. Dielectric data for the phase‐separated dendrimer relaxation (α_D) in the 20% blend conformed to Williams–Landel–Ferry behavior, which allowed the calculation of the apparent activation energy. The α_D relaxation data, analyzed both before and after treatment with the electric modulus, compared well with neat dendrimer data, which confirmed that this relaxation was due to an isolated dendrimer phase. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1381–1393, 2001     

Poly(amidoamine) dendrimer‐coated magnetic nanoparticles for the fast purification and selective enrichment of glycopeptides and glycans

Glycosylated proteins modulate various important functions of organisms. To reveal the functions of glycoproteins, in‐depth characterization studies are necessary. Although mass spectrometry is a very efficient tool for glycoproteomic and glycomic studies, efficient sample preparation methods are required prior to analyses. In the study, poly(amidoamine) dendrimer‐coated magnetic nanoparticles were presented for the specific enrichment and fast purification of glycopeptides and glycans. The enrichment and purification performance of the developed method was evaluated both at the glycopeptide, and the glycan level using several standard glycoprotein digests and released glycan samples. The poly(amidoamine) dendrimer‐coated magnetic nanoparticles not only showed selective affinity (Immunoglobulin G/Bovine Serum Albumin, 1/10 by weight) to glycopeptides and released glycans but also good sensitivity (0.4 ng/µL for Immunoglobulin G) for glycoproteomic and glycomic applications. Thirty‐five glycopeptides of Immunoglobulin G were detected after enrichment with poly(amidoamine) dendrimer‐coated magnetic nanoparticles. In addition, 55 ¹⁸O tagged deamidated glycopeptides belonging to human plasma glycoproteome were confirmed. Finally, fifty 2‐aminobenzoic acid, and 30 procainamide‐labelled human plasma N‐glycans released from human plasma glycoproteins were determined after purifications. The results indicate that the proposed enrichment and purification method using poly(amidoamine) dendrimer‐coated magnetic nanoparticles could be simply adjusted to sample preparation methods.     

A SAXS study of the internal structure of dendritic polymer systems

Small-angle x-ray scattering was used to characterize the single-particle scattering factors produced by poly(amidoamine) dendrimers, poly(propleneimine) dendrimers, and polyol hyperbranched polymers in dilute solutions with methanol as solvent. Fits from electron density modeling reveal similar overall densities of the dendrimers as a function of dendrimer generation. The seventh through tenth generation poly(amidoamine) dendrimers exhibit higher order scattering features that require nearly monodisperse, spherical particles with essentially uniform internal segment densities. Dilute hyperbranched polymer solutions exhibit scattering more indicative of the inherent irregularity of internal segment densities and overall sizes to be expected within these systems. Radii of gyration estimated from electron density modeling agree reasonably well with those estimated by standard Guinier methods used in previous studies. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2913–2924, 1997     

Synthesis,characterization, and heterogeneous catalysis of polymer‐supported poly(propyleneimine) dendrimer stabilized gold nanoparticle catalyst

We report here, the synthesis of two types of heterogeneous nanoparticle catalysts viz., polymer‐supported poly(propyleneimine)‐G2 dendrimer stabilized gold nanoparticle catalysts using crosslinked poly(4‐vinylpyridine) matrix (PSP4VP) as support material. The grafting of dendrimer on the surface of P4VP beads was characterized by FTIR spectrophotometer and CHN analyses. The immobilization of AuNPs was characterized by UV‐Vis spectrum, SEM, and HRTEM studies. The resultant polymer‐supported dendrimer stabilized AuNPs were used as a heterogeneous catalyst for the reduction of 4‐nitrophenol. The catalytic activity is found to be excellent and it can also be reused many times by simple filtration and activity remains maintained. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2525–2532, 2010     

PAMAM树形分子为模板低温制备纳米硫化锌空心球

Hollow ZnS spheres have been prepared in the presence of generation 3.5 poly (amidoamine) dendrimers with surface ester groups (G3.5-COOCH3 PAMAM dendrimer) as synthetic matrix template. The products obtained were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and UV-Vis absorption. TEM studies show that the hollow spheres with diameters ranging from 80 to 100 nm are prepared. The range of wall thickness was estimated to be about 20～30 nm. It was found that the concentration of PAMAM dendrimer had a significant influence on the formation of hollow ZnS spheres. The possible formation mechanism of the hollow spherical structure is also discussed.     

Facile synthesis of polyester dendrimer via combining thio‐bromo “Click” chemistry and ATNRC

This article reports on developing an efficient synthesis approach to aliphatic polyester dendrimer, poly(thioglycerol‐2‐propionate) (PTP), by combination of thio‐bromo “Click” chemistry with atom transfer nitroxide radical coupling (ATNRC). Through the one‐pot two‐step method, linear polystyrene with hydroxyl end groups (l‐PS‐2OH) was obtained by first atom transfer radical polymerization of styrene and following termination using 4‐(2,3‐dihydroxypropoxy)‐TEMPO (DHP‐TEMPO) to capture the PS macroradicals via ATNRC method. Using l‐PS‐2OH as support, the dendritic repeating units divergently were grown from the hydroxyl end groups via esterification and thio‐bromo “Click” reaction two‐step process. In every generation, the resulting intermediates l‐PS‐d‐PTP (G1‐G4) can be easily isolated from the excessive unreacted monomers by simple precipitation in ethanol without help of time, labor and solvent consuming column chromatographic purification. At last, cleavage of the alkoxyamine group between the PS support and dendrimer at elevated temperature (125 °C) provided the targeted polyester dendrimer PTP up to the fourth generation. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1762–1768     

Aggregation properties of oligo(methacrylic acid)-shelled dendrimer and its microenvironment in aqueous solutions

A third-generation poly(amido amine) dendrimer having poly(methacrylic acid) segments on the periphery (G3-PMAA) was newly synthesized. A xanthate-modified dendrimer (G3-X) was first prepared by condensation of the terminal amino groups of the poly(amido amine) dendrimer with an activated-ester xanthate. G3-PMAA was then synthesized by polymerization of methacrylic acid initiated with G3-X. The number-average degree of polymerization of PMAA segment was estimated to be 10. The pK_a value for G3-PMAA was evaluated to be 7.3 that is somewhat higher than that (6.8) of the corresponding linear PMAA with the same segment length, indicating the interaction of PMAA segments caused by assembling them at the dendrimer surface. When the diameter of G3-PMAA in aqueous solution at various pHs was measured by a dynamic light scattering, G3-PMAA was found to self-aggregate in a pH region, where the PMAA segment took a hydrophobic, compact coil conformation. Subsequently, the interaction of a fluorescent probe (1-anilino-8-naphthalenesulfonic acid ammonium salt (ANS)) with G3-PMAA was examined by means of fluorescence spectroscopy. As a result, ANS was found to bind to the hydrophobic site of G3-PMAA aggregates at lower pH, and to be released into water phase at higher pH.     

Structure and rheology of hyperbranched and dendritic polymers. I. Modification and characterization of poly(propyleneimine) dendrimers with acetyl groups

Commercially available fourth and fifth generation poly(propyleneimine) (PPI) dendrimers were functionalized with acetyl chloride and deuterated acetyl chloride. Their solution properties in water and D₂O were measured with dilution viscometry, densitometry, rheology, and small‐angle neutron scattering (SANS) and compared to molecular modeling. Both the acetylated and PPI dendrimers exhibited Newtonian rheology in solution at all concentrations, but the functionalized dendrimers were less viscous than the nonacetylated dendrimers at an equal weight fraction (50 wt %). The acetylated dendrimers exhibited a pronounced structure peak in SANS, however, that was not evident for PPI in solution and a greatly enhanced solubility. This structure peak, evident at concentrations as low as 0.2 wt %, was evidence for long‐range electrostatic interdendrimer forces, which were screened by added salt. A quantitative agreement was obtained between the dilute‐limiting absolute scattering spectra of both the nonacetylated and acetylated dendrimers in solution with model calculations via a homogeneous spherical model and input parameters independently obtained from dilution viscometry or direct calculation. The combined measurements verified significant solvent penetration for both dendrimer types. The form factors measured in this manner were also in good quantitative agreement with the results of molecular dynamics simulations, which pointed to significant backfolding of the terminal groups. SANS and rheology measurements at higher concentrations suggested dendrimer clustering and interpenetration with increasing concentration, leading to less structure and lower viscosity than would be predicted from the dilute‐limiting behavior. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 857–873, 2000     

Grafting of hyperbranched poly(amidoamine) onto carbon black surfaces using dendrimer synthesis methodology

To modify carbon black surface, the surface grafting of hyperbranched poly(amidoamine) onto the surface by using dendrimer synthesis methodology was investigated. Carbon black having amino groups (initiator sites) was prepared by the reduction of surface nitro groups introduced by nitration of aromatic rings. It was found that hyperbranched poly(amidoamine) was propagated from carbon black surface by repeating two processes: (1) Michael addition of methyl acrylate (MA) to surface amino groups and (2) amidation of the resulting esters with ethylenediamine: the percentage of poly(amidoamine) grafting reached to 96.2% after 10th‐generation. The grafting of hyperbranched poly(amidoamine) onto polystyrene‐bead as a model compound of carbon black was also achieved by the above procedures. However, the theoretical propagation of poly(amidoamine) dendrimer was not achieved, because of steric hindrance of grafted polymer. Hyperbranched poly(amidoamine)‐grafted carbon black gave a stable dispersion in a good solvent for poly(amidoamine). Copyright © 2001 John Wiley & Sons, Ltd.     

Polystyrene latices containing dodecanamide‐modified poly(propyleneimine) dendrimers

Polymerization of styrene in aqueous dispersions of the dodecanamide derivative of poly(propyleneimine) dendrimer DAB‐dendr‐(NH₂)₆₄ and sodium dodecyl sulfate (SDS) produced stable latices. With initial SDS concentrations of 10 mM or less, molar ratios of SDS to dendrimer end groups ranging from 2.3:1 to 9.5:1, and less than 10 wt % of SDS relative to styrene, the polystyrene latices had diameters of 30–60 nm and coefficients of variation of diameters of less than 10% when measured by transmission electron microscopy. Higher concentrations of SDS gave more polydisperse latices. The polystyrene latices formed with SDS and the dodecanamide‐modified dendrimer were almost the same size and polydispersity as those formed with SDS and the parent primary amine dendrimer DAB‐dendr‐(NH₂)₆₄. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 597–605, 2003     

Synthesis and properties of biomimetic poly(L‐glutamate)‐b‐poly(2‐acryloyloxyethyllactoside)‐b‐poly(L‐glutamate) triblock copolymers

A novel class of biomimetic glycopolymer–polypeptide triblock copolymers [poly(L ‐glutamate)–poly(2‐acryloyloxyethyllactoside)–poly(L ‐glutamate)] was synthesized by the sequential atom transfer radical polymerization of a protected lactose‐based glycomonomer and the ring‐opening polymerization of β‐benzyl‐L ‐glutamate N‐carboxyanhydride. Gel permeation chromatography and nuclear magnetic resonance analyses demonstrated that triblock copolymers with defined architectures, controlled molecular weights, and low polydispersities were successfully obtained. Fourier transform infrared spectroscopy of the triblock copolymers revealed that the α‐helix/β‐sheet ratio increased with the poly(benzyl‐L ‐glutamate) block length. Furthermore, the water‐soluble triblock copolymers self‐assembled into lactose‐installed polymeric aggregates; this was investigated with the hydrophobic dye solubilization method and ultraviolet–visible analysis. Notably, this kind of aggregate may be useful as an artificial polyvalent ligand in the investigation of carbohydrate–protein recognition and for the design of site‐specific drug‐delivery systems. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5754–5765, 2004     

Ester‐ and amide‐terminated dendrimers with alternating amide and ether generations

Ester‐terminated polyamide dendrimers up to the third generation and amide‐terminated polyamide dendrimers of the first generation were synthesized by convergent growth. The Williamson ether synthesis and diphenylphosphoryl azide (DPPA) coupling of amines to carboxylic acids were used for the construction of the dendrimers, having alternate ether and amide generations. The methyl ester‐ and N,N‐diethylamide‐terminated dendrimers were readily soluble in common organic solvents while the N‐methylamide‐ and N‐benzylamide‐terminated dendrimers were soluble only in DMF and DMSO. Both the end and internal amide groups of the N,N‐diethylamide‐terminated dendrimer were reduced by LiAlH₄ to form a polyamine dendrimer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1533–1543, 2000