Structural Characterization of a Covalent Monolayer Sheet Obtained by Two‐Dimensional Polymerization at an Air/Water Interface

This work describes a two‐dimensional polymerization at an air/water interface and provides, for the first time, direct spectroscopic evidence for the kind of crosslinks formed and for the conversion reached in a covalently bonded monolayer sheet. This evidence was obtained through a combination of a variety of monolayer characterization techniques before and after transfer onto solid substrates, in particular by tip‐enhanced Raman spectroscopy (TERS) and TERS mapping after transfer of both the monomer and polymer monolayer onto Au(111). This work is a major advance for the field of 2D polymers synthesized at the air/water interface as it, in principle, allows estimation of the crystallinity by percolation theory and the location of regions with defects.     

Synthesis,characterization, and degradation of poly(anhydride‐co‐amide)s and their blends with polylactide

In attempt to improve the properties of polyanhydrides based on aliphatic anhydrides, we synthesized novel polyanhydrides containing amide groups in the main chains. In this work, N,N′‐bis(L ‐alanine)‐sebacoylamide (BSAM) was prepared from natural amino acid and sebacic acid (SA) and characterized by IR and ¹H NMR. In addition, polymers of PBSAM, P[1,6‐bis(P‐carboxyphenoxy) hexane (CPH)‐BSAM], and P(CPH‐SA), blends of P(CPH‐SA)/polylactide (PLA), P(CPH‐BSAM)/PLA were also prepared and characterized by IR, gel permeation chromatography, and differential scanning calorimetry. The hydrolytic degradation of polyanhydrides and their blends with PLA (number‐average molecular weight = 2.90 × 10⁵) was evaluated in 0.1 M phosphate buffer pH 7.4 at 37 °C. The results indicate that the existence of amide, aromatic, and ester bonds in the main chain of polymers slows down the degradation rate, and the tendency becomes clearer with the increasing amount of them, and the copolymers and their blends with PLA possess excellent physical and mechanical properties. These can make them more widely used in drug delivery and nerve regeneration. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4311–4317, 2004     

Synthesis,characterization, and thermal properties of a novel pentaerythritol‐initiated star‐shaped poly(p‐dioxanone)

A novel star‐shaped poly(p‐dioxanone) was synthesized by the ring‐opening polymerization of p‐dioxanone initiated by pentaerythritol with stannous octoate as a catalyst in bulk. The effect of the molar ratio of the monomer to the initiator on the polymerization was studied. The polymers were characterized with ¹H NMR and ¹³C NMR spectroscopy. The thermal properties of the polymers were investigated with differential scanning calorimetry and thermogravimetric analysis. The novel star‐shaped poly(p‐dioxanone) has a potential use in biomedical materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1245–1251, 2006     

Substrate‐induced formation of a recognition structure in a four‐polypeptide–lipid monolayer system

Poly(γ‐methyl L ‐glutamate)s with Ser, His, Asp, and Glu residues at the amino terminal as the serine protease catalytic site were prepared. The number‐average degree of polymerization of the polypeptides was 51. A dipalmitoylphosphatidylcholine monolayer containing the polypeptides was formed at the air–water interface and was transferred onto gold‐deposited glass plates. The binding of N‐acetyltyrosine ethyl ester, a typical substrate of the serine protease, to the monolayer was characterized by surface plasmon resonance measurements. The four‐polypeptide–lipid monolayer system conditioned on an aqueous solution containing the substrate N‐acetyltyrosine ethyl ester exhibited Langmuir‐type binding of the substrate. Its binding constant of 6.1 × 10⁴ M⁻¹ was about 20 times larger than that observed for a monolayer prepared on pure water. The behavior may have arisen from a substrate‐induced rearrangement of the four kinds of polypeptides in the monolayer, forming a substrate‐binding structure similar to that found in serine protease. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2186–2191, 2000     

Synthesis and solution behavior of comb‐like terpolymers with poly(ethylene oxide) macromonomer

A novel macromonomer: p‐vinylbenzyl‐terminated octylphenoxy poly(ethylene oxide) (polymerization number: 18) (VBPEO) was synthesized. The comb‐like acrylamide‐based terpolymers (PVEA) were synthesized by aqueous free‐radical copolymerization technique using acrylamide (AM), VBPEO and sodium 2‐acrylamido‐2‐methylpropane sulphonate (NaAMPS). The macromonomer and PVEA polymer were characterized with Fourier transform infrared (FTIR) spectroscopy and proton nuclear magnetic resonance (¹H NMR). The polymers exhibited self‐assembly behavior in water and the brine solutions. The polymers could be employed in the oil reservoirs of either the high or medium to low permeability due to the low intrinsic viscosities. The optimum NaAMPS feed amount could not only increase the water solubility, but also facilitate the intermolecular associations. Implementing VBPEO into the polymer greatly increased the rigidity of molecular chains, resulting in a high apparent viscosity of the PVEA in water and the brine solutions. The PVEA brine solutions exhibited both excellent uni‐ and bi‐valent cation resistance, salt‐ and heat‐thickening twice, pseudoplastic behavior, and thixotropy. The SEM morphologies showed that the expanded polymer bundles as well as the associated structures with huge sizes were formed for PVEA in water and that the continuous network structures were still formed in the PVEA brine solutions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1241–1250, 2010     

Synthesis and characterization of a novel,fluoride‐releasing dimethacrylate monomer and its dental composite

A novel, fluoride‐releasing dimethacrylate monomer containing zirconium fluoride chelate for use in dental composites was synthesized by an efficient four‐step procedure starting from 4,4‐bis‐(4‐hydroxyphenyl)‐pentanoic acid and was characterized by electrospray mass spectrometry, Fourier transform infrared (FTIR), and ¹H and ¹³C NMR spectroscopies. The synthesized monomer was photopolymerized with camphorquinone and 1‐phenyl‐1,2‐propane‐dione as initiators and N,N‐dimethylaminoethyl methacrylate as an accelerator. The photopolymerization process was investigated by FTIR spectroscopy. The experimental composite containing 13.7 wt % of the synthesized monomer was tested for fluoride release, fluoride recharge, compressive strength, and flexure strength, each in comparison to three commercial flowable dental composites. The results showed that the experimental composite had significantly higher fluoride release and fluoride recharge capabilities than the commercial flowable composites. The flexure strength was comparable to the commercial materials. The water sorption and solubility met the requirements of the International Organization for Standardization 4049 and the American National Standards Institute/American Dental Association Specification Number 27. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 985–998, 2004     

Synthesis and surfactochromicity of 1,4‐diketopyrrolo[3,4‐c]pyrrole(DPP)‐based anionic conjugated polyelectrolytes

Two novel anionic conjugated copolyelectrolytes PSDPPPV and PSDPPPE were synthesized via Heck/Sonogashira coupling reactions and characterized by FT‐IR, ¹H NMR, UV‐vis, and PL spectroscopy. The two polymers are respectively constituted of 2,5‐diethoxy‐1,4‐phenyleneethynylene (DPV) and 2,5‐diethoxy‐1,4‐phenyleneethynylene (DPE) with 1,4‐diketo‐2,5‐bis(4‐sulfonylbutyl)‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole (SDPP) which is a novel water soluble diketopyrrolopyrrole derivative. PSDPPPV and PSDPPPE show broad absorption band in visible region and they exhibit strong fluorescence quenching in aqueous solution. The fluorescence of their aqueous solutions can be enhanced in the presence of cationic surfactant or polymer nonionic surfactant. Fluorescence enhancement by introduction of polyvinylpyrrolidone (PVP) shows linear response. This result provides a controllable method to increase fluorescence intensity of dipyrrolopyrrole‐based conjugate polyelectrolytes in aqueous phase. The optical properties suggested that PSDPPPV and PSDPPPE which are negatively charged conjugated polymers can assemble with positively charged photovoltaic materials to form ionic photoactive layer. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 739–751     

Orthogonally functionalizable copolymers based on a novel reactive carbonate monomer

A novel N‐hydroxy succinimide‐based carbonate monomer that allows direct synthesis of polymers incorporating a reactive carbonate group in the side chain was synthesized. This new monomer was copolymerized with methyl methacrylate and poly(ethylene glycol) methylether methacrylate using free‐radical polymerization to obtain organo‐ and water‐soluble reactive copolymers. Copolymerization of the activated carbonate monomer with an azide‐containing monomer and N‐hydroxy succinimide‐containing activated ester monomer provided orthogonally functionalizable copolymers. The pendant reactive carbonate groups of the copolymers were functionalized with amines to obtain carbamates. Polymers capable of orthogonal functionalization could be selectively functionalized as desired using subsequent 1,3‐dipolar cycloaddition or amidation reactions. The novel monomer and the copolymers were characterized by ¹H‐NMR, ¹³C‐NMR, and infrared spectroscopy. The efficient stepwise orthogonal functionalization of the copolymers were examined via ¹H‐NMR spectroscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of novel poly(cycloalkyl methacrylate) bearing fused‐ring structure and its copolymers

A new family of cycloaliphatic fused‐ring acrylic polymers based on 8‐hydroxymethyltricyclo[5.2.1.0^2,6]decane (TCD) has been synthesized by free‐radical polymerization. TCD‐methacrylate (TCD‐MA) was synthesized by reacting TCD with methacrylic acid in toluene via transesterification with p‐toluenesulfonic acid as a catalyst. TCDMA was polymerized in toluene with benzoyl peroxide as a free‐radical initiator at 80 °C. Copolymers were synthesized by polymerizing TCDMA with styrene and methyl methacrylate. The composition of the comonomers was varied from 0 to 100%. Homo‐ and copolymers were characterized by Fourier transform infrared (FTIR) and ¹³C NMR spectroscopy. Molecular weight determination by gel permeation chromatography showed that the polymers were obtained in very high molecular weights in the range of M_n > 50,000 and M_w > 80,000 with relatively low polydispersity. The composition analysis of both the copolymer series were determined by ¹H NMR. The thermal properties of the homo‐ and copolymers were studied with differential scanning calorimetry and all the polymers were found to be amorphous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5617–5626, 2004     

Poly[2,7‐(9,9‐dihexylfluorene)‐alt‐pyridine] with donor‐acceptor architectures: A new series of blue‐light‐emitting alternating copolymers

A novel series of well‐defined alternating poly[2,7‐(9,9‐dihexylfluorenyl)‐alt‐pyridinyl] (PDHFP) with donor‐acceptor repeat units were synthesized using palladium (0)‐catalyzed Suzuki cross‐coupling reactions in good to high yields. In this series of alternating polymers, 2, 7‐(9,9‐dihexylfluorenyl) was used as the light emitting unit, and the electron deficient pyridinyl unit was employed to provide improved electron transportation. These polymers were characterized by ¹H‐NMR and ¹³C‐NMR, gel permeation chromatography (GPC), thermal analyses, and UV‐vis and fluorescence spectroscopy. The glass transition temperature of copolymers in nitrogen ranged from 110 to 148 °C, and the copolymers showed high thermal stabilities with high decomposition temperatures in the range of 350 to 390 °C in air. The difference in linkage position of pyridinyl unit in the polymer backbone has significant effects on the electronic and optical properties of polymers in solution and in film phases. Meta‐linkage (3,5‐ and 2,6‐linkage) of pyridinyl units in the polymer backbone is more favorable to polymer for pure blue emission and prevention of aggregation of polymer chain than para‐linkage (2,5‐linkage) of the pyridinyl units. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4792–4801, 2004     

Thianthrene as an activating group for the synthesis of poly(aryl ether thianthrene)s by nucleophilic aromatic substitution

A method for the preparation of poly(aryl ether thianthrene)s has been developed in which the aryl ether linkage is generated in the polymer‐forming reaction. The thianthrene heterocycle is sufficiently electron‐withdrawing to allow fluoro displacement with phenoxides by nucleophilic aromatic substitution. The monomer for this reaction, 2,7‐difluorothianthrene, can be synthesized in a moderate yield by a simple reaction sequence. Semiempirical calculations at the PM3 level suggest that 2,7‐difluorothianthrene is sufficiently activated, whereas NMR spectroscopy (¹H and ¹³C) indicates that the monomer is only slightly activated or (¹⁹F) not sufficiently activated for nucleophilic aromatic substitution. Model reactions with p‐cresol have demonstrated that the fluorine atoms on 2,7‐difluorothianthrene are readily displaced by phenoxides in high yields, and the process has been deemed suitable for polymer‐forming reactions. High‐molecular‐weight polymers have been produced from bisphenol A, bisphenol AF, and 4,4′‐biphenol. The polymers have been characterized with gel permeation chromatography, NMR spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. The glass‐transition temperatures for the polymers of different compositions and molecular weights range from 138 to 181 °C, and all the polymers have shown high thermooxidative stability, with 5% weight loss values in an air environment approaching 500 °C. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6353–6363, 2004     

Frontal polymerization synthesis and characterization of Konjac glucomannan‐graft‐acrylic acid polymers

Konjac glucomannan‐graft‐acrylic acid polymers, used as superabsorbent polymers (SAPs), were synthesized by frontal polymerization (FP). The features of front propagation including front velocity and maximum temperature (T_max) were influenced by the amount of glucomannan, initiator, and environment temperature. The graft copolymer was characterized by FTIR, DSC, and SEM. The amount of crosslinking agent mainly determined the crosslinking degree of SAPs that would affect the water absorbency and microstructure. Water absorbency of SAP was also investigated and most of them displayed high water absorption rate. The aforementioned results allow us to conclude that FP can be considered as a promising method to fabricate SAP for its excellent advantages. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3391–3398, 2009     

Synthesis and sulfonation of poly(arylene ether)s containing tetraphenyl methane moieties

Novel poly(arylene ether)s with sulfonic acid containing pendent groups were successfully synthesized by the nucleophilic displacement of aromatic dihalides with bisphenols in an aprotic solvent in the presence of excess potassium carbonate followed by sulfonation with chlorosulfonic acid. The sulfonation took place only at the controlled positions on the phenyl rings due to the novel bisphenol structures designed. The sulfonic acid group containing polymers were very soluble in common organic solvents, such as dimethyl sulfoxide, N,N′‐dimethylacetamide, and dimethylformamide, but swelled only slightly in water. These sulfonic acid group containing polymers were readily cast into tough and smooth films from organic solvents. The synthesized polymers had high glass‐transition temperatures of 171.0–240.7 °C and high molecular weights of 15,600–33,000 Da. These films could potentially be used as proton‐exchange membranes for fuel cells. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1779–1788, 2004     

Synthesis and properties of novel conjugated poly(silylacetylene silazane)s

A series of novel conjugated polymers, poly(silylacetylene silazane)s having different substituents, were prepared by ammonolysis of the corresponding α,ω‐dichlorosilyleneacetylene oligomers. The structures and properties of the poly(silylacetylene silazane)s were characterized by Fourier transform infrared, ¹H, ¹³C, ²⁹Si NMR, and elemental analyses, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, and spectrofluorophotometry. The resulting polymers had good thermal properties and were moderately fluorescent. Their thermal stability was improved, and obvious red shift was observed when a phenyl substituent was attached on a silicon atom of polymers in the emission spectra. These polymers have the potential to be used as light‐emitting materials with good thermal stability. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2897–2903, 2004     

Cyclolinear polysiloxanes. I. Synthesis and characterization

The synthesis and characterization of two novel cyclic siloxanes, diacetoxydiethyltetramethylcyclotetrasiloxane and diacetoxytriethylpentamethylcyclopentasiloxane, and cyclolinear polymers synthesized from these monomers are presented. The cyclic siloxanes were synthesized from tetramethylcyclotetrasiloxane and pentamethylcyclopentasiloxane, respectively, by acetylation followed by ethylation. The cyclic monomers were characterized with ¹H NMR spectroscopy. Subsequently, the cyclic siloxanes were self‐condensed into cyclolinear polysiloxanes and cocondensed (extended) with silanol‐terminated polydimethylsiloxane into high‐molecular‐weight polymers containing cyclic units withlinearpolydimethylsiloxane spacers (extended cyclolinear polysiloxanes). The molecular weights of both the cyclolinear polysiloxanes and extended cyclolinear polysiloxanes were determined. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4039?4052, 2006     

Novel synthesis of polyethylene–poly(dimethylsiloxane) copolymers with a metallocene catalyst

Polyethylene–poly(dimethylsiloxane) copolymers were synthesized in solution from an ethylene monomer and an ω‐vinyl poly(dimethylsiloxane) (PDMS) macromonomer at 363 and 383 K with EtInd₂ZrCl₂/methylaluminoxane as a catalyst. The copolymers obtained were characterized with Fourier transform infrared spectroscopy, ¹H and ¹³C NMR, size exclusion chromatography, and differential scanning calorimetry. The rheological properties of the molten polymers were determined under dynamic shear flow tests at small‐amplitude oscillations, whereas the physical arrangement of the phase domains was analyzed with scanning electron microscopy (SEM)/energy dispersive X‐ray (EDX). The analysis of the catalyst activity and the resulting polymers supported the idea of PDMS blocks or chains grafted to polyethylene. The changes in the rheological behavior and the changes in the Fourier transform infrared and NMR spectra were in agreement with this proposal. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2462–2473, 2004     

Synthesis of a soluble pyrrole copolymer with phenetidine

A new series of copolymers was synthesized through the oxidative polymerization of pyrrole (PY) and o‐phenetidine (PHT) with inorganic oxidants in acidic media. The polymerization parameters including the mixing method of the oxidant with the comonomer, the comonomer ratio, the time, the temperature, the oxidant, the organic medium, and the acid were systematically optimized for the synthesis of copolymers with high yields, intrinsic viscosities, and solubility. The resultant copolymers were characterized by elemental analysis, infrared, ultraviolet–visible, solution high‐resolution ¹H NMR and solid‐state high‐resolution ¹³C NMR, circular dichroism spectroscopy, and cyclic voltammetry. The results showed that the PY observed content in the copolymers was much higher than the PY feed content. The regular variation of the polymerization yield, intrinsic viscosity, solubility, macromolecular structure, and electroactivity of the resulting polymers with the comonomer ratio, together with the complete solubility of a PY/PHT (10/90) polymer in highly polar solvents, indicated the formation of real random copolymers containing both PY and PHT units rather than a mixture of two homopolymers. However, the polymers containing more than 59 mol % PY were not homogeneous copolymers consisting of soluble and insoluble parts. A semiquantitative relationship between the polymerization yield or solubility of the copolymers and the polarity index of the organic solvents was examined. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2073–2092, 2004     

Synthesis of a novel one‐pot approach of hyperbranched polyurethanes and their properties

A new method for the synthesis of hyperbranched polymers involving the use of AB_x macromonomers containing linear units have been investigated. Two types of novel hyperbranched polyurethanes have been synthesized by a one‐pot approach. The structures of monomers and polymers were characterized by elemental analysis, ¹H NMR, ¹³C NMR, Fourier transform infrared spectroscopy, gel permeation chromatography, and thermogravimetric analysis. The hyperbranched polymers have been proven to be extremely soluble in a wide range of solvents. Polymer electrolytes were prepared with hyperbranched polymer, linear polymer as the host, and lithium perchlorate (LiClO₄) as the ion source. Analysis of the isotherm conductivity dependence of the ion concentration indicated that these hyperbranched polymers could function as a “solvent” for the lithium salt. The conductivity increased with the increasing concentration of hyperbranched polymers in the host polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 344–350, 2002     

Design and synthesis of Ru(II-bipyridyl-containing conjugated polymers

A series of novel π-conjugated polymers containing ruthenium bipyridine complexes was synthesized by a cross-coupling reaction and characterized. These polymers exhibit absorption maxima around 330–350 nm (π-π*) and 460–500 nm metal-to-ligand charge transfer (MLCT), respectively. They are soluble in common organic solvents, and all polymers can be converted into transparent films. We investigated the influence of different donating and acceptor diethynylarenes of the ultraviolet-visible spectra. The oxidation potential, which was measured by cyclic- and square-wave voltametry, showed a typical Ru^2+/3+ exhibited at 1.25 V versus the saturated calomel electrode. The polymers were further characterized with photoluminescence measurements. When excited at 442 nm ( 11a ), the polymer exhibited an emission peak at 690 nm. This peak was attributed to the MLCT states. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 722–732, 2004     

Synthesis,characterization, and curing kinetics of novel ladder‐like polysilsesquioxanes containing side‐chain maleimide groups

Two ladder‐like polysilsesquioxanes (LPS) containing side‐chain maleimide groups have been synthesized successfully by reacting N‐(4‐hydroxyphenyl)maleimide (HPM) with LPS containing 100 mol % of chloropropyl groups (Ladder A ) and 50 mol % of each methyl and chloropropyl group (Ladder B ). HPM was synthesized by reacting maleic anhydride with 4‐aminophenol, and the resulting amic acid was imidized using p‐toluenesulfonic acid as a catalyst (Scheme 1 ). The LPSs were characterized by Fourier transform infrared (FTIR), ¹H nuclear magnetic resonance (NMR), proton‐decoupled ¹³C NMR, ²⁹Si NMR, wide‐angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Characterization indicated that these polymers had ordered ladder‐like structures with possible defects. These polymers were soluble in common solvents at ambient temperature, which suggested that they were not crosslinked. Both the polymers and the HPM were cured, and their kinetics were followed by dynamic DSC. The Ozawa and Kissinger methods were used to calculate activation energies for curing. Curing increased the temperature at which both 5% weight loss and maximum rate of weight loss were observed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4036–4046, 2004