Polymerization of 1,3‐dienes with functional groups. II. Free‐radical polymerization of N‐(2‐methylene‐3‐butenoyl)piperidine

The free‐radical homopolymerization and copolymerization behavior of N‐(2‐methylene‐3‐butenoyl)piperidine was investigated. When the monomer was heated in bulk at 60 °C for 25 h without an initiator, about 30% of the monomer was consumed by the thermal polymerization and the Diels–Alder reaction. No such side reaction was observed when the polymerization was carried out in a benzene solution with 1 mol % 2,2′‐azobisisobutylonitrile (AIBN) as an initiator. The polymerization rate equation was found to be R_p ∝ [AIBN]^0.507[M]^1.04, and the overall activation energy of polymerization was calculated to be 89.5 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure that included both 1,4‐E and 1,4‐Z configurations. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were carried out in benzene solutions at 60 °C with AIBN as an initiator. In the copolymerization with styrene, the monomer reactivity ratios were r₁ = 6.10 and r₂ = 0.03, and the Q and e values were calculated to be 10.8 and 0.45, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1545–1552, 2003     

Kinetic study of the radical polymerization behavior of N‐(1‐phenylethylaminocarbonyl)methacrylamide

Polymerization of N‐(1‐phenylethylaminocarbonyl)methacrylamide (PEACMA) with dimethyl 2,2′‐azobisisobutyrate (MAIB) was kinetically studied in dimethyl sulfoxide (DMSO). The overall activation energy of the polymerization was estimated to be 84 kJ/mol. The initial polymerization rate (R_p) is given by R_p = k[MAIB]^0.6[PEACMA]^0.9 at 60 °C, being similar to that of the conventional radical polymerization. The polymerization system involved electron spin resonance (ESR) spectroscopically observable propagating poly(PEACMA) radical under the actual polymerization conditions. ESR‐determined rate constants of propagation and termination were 140 L/mol s and 3.4 × 10⁴ L/mol s at 60 °C, respectively. The addition of LiCl accelerated the polymerization in N,N‐dimethylformamide but did not in DMSO. The copolymerization of PEACMA(M₁) and styrene(M₂) with MAIB in DMSO at 60 °C gave the following copolymerization parameters; r₁ = 0.20, r₂ = 0.51, Q₁ = 0.59, and e₁ = +0.70. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2013–2020, 2005     

Kinetic study on the radical polymerization of 2‐methacryloyloxyethyl phosphorylcholine

Polymerization of 2‐methacryloyloxyethyl phosphorylcholine (MPC) was kinetically investigated in ethanol using dimethyl 2,2′‐azobisisobutyrate (MAIB) as initiator. The overall activation energy of the homogeneous polymerization was calculated to be 71 kJ/mol. The polymerization rate (R_p) was expressed by R_p = k[MAIB]^0.54±0.05 [MPC]^1.8±0.1. The higher dependence of R_p on the monomer concentration comes from acceleration of propagation due to monomer aggregation and also from retardation of termination due to viscosity effect of the MPC monomer. Rate constants of propagation (k_p) and termination (k_t) of MPC were estimated by means of ESR to be k_p = 180 L/mol · s and k_t = 2.8 × 10⁴ L/mol · s at 60 °C, respectively. Because of much slower termination, R_p of MPC in ethanol was found at 60 °C to be 8 times that of methyl methacrylate (MMA) in benzene, though the different solvents were used for MPC and MMA. Polymerization of MPC with MAIB in ethanol was accelerated by the presence of water and retarded by the presence of benzene or acetonitrile. Poly(MPC) showed a peculiar solubility behavior; although poly(MPC) was highly soluble in ethanol and in water, it was insoluble in aqueous ethanol of water content of 7.4–39.8 vol %. The radical copolymerization of MPC (M₁) and styrene (St) (M₂) in ethanol at 50 °C gave the following copolymerization parameters similar to those of the copolymerization of MMA and St; r₁ = 0.39, r₂ = 0.46, Q₁ = 0.76, and e₁ = +0.51. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 509–515, 2000     

Radical‐initiated polymerization of β‐methyl‐α‐methylene‐γ‐butyrolactone

β‐Methyl‐α‐methylene‐γ‐butyrolactone (MMBL) was synthesized and then was polymerized in an N,N‐dimethylformamide (DMF) solution with 2,2‐azobisisobutyronitrile (AIBN) initiation. The homopolymer of MMBL was soluble in DMF and acetonitrile. MMBL was homopolymerized without competing depolymerization from 50 to 70 °C. The rate of polymerization (R_p) for MMBL followed the kinetic expression R_p = [AIBN]^0.54[MMBL]^1.04. The overall activation energy was calculated to be 86.9 kJ/mol, k_p/k_t^1/2 was equal to 0.050 (where k_p is the rate constant for propagation and k_t is the rate constant for termination), and the rate of initiation was 2.17 × 10^?8 mol L^?1 s^?1. The free energy of activation, the activation enthalpy, and the activation entropy were 106.0, 84.1, and 0.0658 kJ mol^?1, respectively, for homopolymerization. The initiation efficiency was approximately 1. Styrene and MMBL were copolymerized in DMF solutions at 60 °C with AIBN as the initiator. The reactivity ratios (r₁ = 0.22 and r₂ = 0.73) for this copolymerization were calculated with the Kelen–Tudos method. The general reactivity parameter Q and the polarity parameter e for MMBL were calculated to be 1.54 and 0.55, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1759–1777, 2003     

Synthesis and characterization of well‐defined poly(2‐hydroxyethyl methacrylate‐co‐styrene)‐graft‐poly(ε‐caprolactone) by sequential controlled polymerization

A new graft copolymer, poly(2‐hydroxyethyl methacrylate‐co‐styrene) ‐graft‐poly(?‐caprolactone), was prepared by combination of reversible addition‐fragmentation chain transfer polymerization (RAFT) with coordination‐insertion ring‐opening polymerization (ROP). The copolymerization of styrene (St) and 2‐hydroxyethyl methacrylate (HEMA) was carried out at 60 °C in the presence of 2‐phenylprop‐2‐yl dithiobenzoate (PPDTB) using AIBN as initiator. The molecular weight of poly (2‐hydroxyethyl methacrylate‐co‐styrene) [poly(HEMA‐co‐St)] increased with the monomer conversion, and the molecular weight distribution was in the range of 1.09 ～ 1.39. The ring‐opening polymerization (ROP) of ?‐caprolactone was then initiated by the hydroxyl groups of the poly(HEMA‐co‐St) precursors in the presence of stannous octoate (Sn(Oct)₂). GPC and ¹H‐NMR data demonstrated the polymerization courses are under control, and nearly all hydroxyl groups took part in the initiation. The efficiency of grafting was very high. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5523–5529, 2004     

Radical and cationic polymerizations of 3‐ethyl‐3‐methacryloyloxymethyloxetane

3‐Ethyl‐3‐methacryloyloxymethyloxetane (EMO) was easily polymerized by dimethyl 2,2′‐azobisisobutyrate (MAIB) as the radical initiator through the opening of the vinyl group. The initial polymerization rate (R_p) at 50 °C in benzene was given by R_p = k[MAIB]^0.55 [EMO]^1.2. The overall activation energy of the polymerization was estimated to be 87 kJ/mol. The number‐average molecular weight (M?_n) of the resulting poly(EMO)s was in the range of 1–3.3 × 10⁵. The polymerization system was found to involve electron spin resonance (ESR) observable propagating poly(EMO) radicals under practical polymerization conditions. ESR‐determined rate constants of propagation (k_p) and termination (k_t) at 60 °C are 120 and 2.41 × 10⁵ L/mol s, respectively—much lower than those of the usual methacrylate esters such as methyl methacrylate and glycidyl methacrylate. The radical copolymerization of EMO (M₁) with styrene (M₂) at 60 °C gave the following copolymerization parameters: r₁ = 0.53, r₂ = 0.43, Q₁ = 0.87, and e₁ = +0.42. EMO was also observed to be polymerized by BF₃OEt₂ as the cationic initiator through the opening of the oxetane ring. The M?_n of the resulting polymer was in the range of 650–3100. The cationic polymerization of radically formed poly(EMO) provided a crosslinked polymer showing distinguishably different thermal behaviors from those of the radical and cationic poly(EMO)s. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1269–1279, 2001     

Synthesis and characterization of original functional polymers of tetrafluoroethylene and 4,5,5‐trifluoro‐4‐ene pentyl acetate

The bulk radical copolymerization of tetrafluoroethylene (TFE) with 4,5,5‐trifluoro‐4‐ene pentyl acetate (FAc), initiated by tert‐butyl peroxypivalate to synthesize original, functionalized fluorinated poly(TFE‐co‐FAc), was investigated. FAc monomer was prepared from a five‐step process. The copolymerization was carried out in batch at different initial monomer molar ratios ([TFE]_o/[FAc]_o ranging from 95/5 to 10/90 mol %) and at different initiator concentrations (ranging between 0.075 and 1.100 mol % about the monomers) at 70 °C. All the experiments revealed the production of fluorooligomers as evidenced by an allylic‐transfer reaction from FAc. The microstructure of these copolymers (i.e., the molar percentage of both monomers in the copolymers) was assessed by ¹⁹F NMR spectroscopy. From the kinetics of copolymerization, two key characteristics were determined. First, the reaction order to the initiator (being 1.07) and that of FAc monomer (0.85) showed a heterogeneous character of the copolymerization and monomolecular chain‐transfer reaction to FAc. Second, from the Tidwell and Mortimer method, the reactivity ratios of both comonomers were determined, showing a tendency to alternance in a wide range of initial monomeric ratios (30/70–70/30): r_FAc = 0.20 ± 0.26 and r_TFE = 0.18 ± 0.15. Alfrey and Price's Q and e values of FAc were calculated by Greenley's technique [Q_FAc = 0.098 (from Q_TFE = 0.032) and e_FAc = 1.23 (vs e_TFE = 1.63)], indicating that FAc is a strong electron‐withdrawing monomer as TFE. The normalized monomer‐diad and triad fractions as a function of the polymer composition were obtained from the comonomer sequence‐distribution procedure. The average molecular weights and molecular weight distributions as well as the thermal properties (glass‐transition temperature and decomposition temperature) of the fluorocopolymers were assessed and are discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1693–1706, 2004     

Radical copolymerization of vinylidene fluoride with 1‐bromo‐2,2‐difluoroethylene

The radical copolymerization of vinylidene fluoride (VDF) and 1‐bromo‐2,2‐difluoroethylene (BDFE) in 1,1,1,3,3‐pentafluorobutane solution at different monomer molar ratios (ranging from 96/4 to 25/75 mol %) and initiated by tert‐butylperoxypivalate (TBPPI, mainly) is presented. Poly(VDF‐co‐BDFE) copolymers of various aspects (from white powders to yellow viscous liquids) were produced depending on the copolymer compositions. The microstructures of the obtained copolymers were characterized by ¹⁹F and ¹H NMR spectroscopy and by elementary analysis and these techniques enabled one to assess the contents of both comonomers in the produced copolymers. VDF was shown to be more incorporated in the copolymer than BDFE. From the extended Kelen and Tudos method, the kinetics of the radical copolymerization led to the determination of the reactivity ratios, r_i, of both comonomers (r_VDF = 1.20 ± 0.50 and r_{BDFE =} 0.40 ± 0.15 at 75 °C) showing that VDF is more reactive than BDFE. Alfrey‐Price's Q and e values of BDFE monomer were calculated to be 0.009 (from Q_VDF = 0.008) or 0.019 (from Q_VDF = 0.015) and +1.22 (vs. e_VDF = 0.40) or +1.37 (vs. e_VDF = 0.50), respectively, indicating that BDFE is an electron‐accepting monomer. Statistic cooligomers were produced with molar masses ranging from 1,800 to 5,500 g/mol (assessed by GPC with polystyrene standards). A further evidence of the successful copolymerization was shown by the selective reduction of bromine atoms in poly(VDF‐co‐BDFE) cooligomers that led to analog PVDF. The thermal properties of the poly(VDF‐co‐BDFE) cooligomers were also determined and those containing a high VDF amount exhibited a high thermal stability. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3964–3976, 2010.     

Synthesis of a new monomer N′‐(β‐methacryloyloxyethyl)‐2‐pyrimidyl‐(p‐benzyloxycarbonyl)aminobenzenesulfonamide and its copolymerization with N‐phenyl maleimide

The new monomer N′‐(β‐methacryloyloxyethyl)‐2‐pyrimidyl‐(p‐benzyloxy‐ carbonyl)aminobenzenesulfonamide (MPBAS) (M₁) is synthesized using sulfadiazine as parent compound. It could be homopolymerized and copolymerized with N‐phenyl maleimide (NPMI) (M₂) by radical mechanism using AIBN as initiator at 60 °C in dimethylformamide. The new monomer MPBAS and polymers were identified by IR, element analysis and ¹H NMR in detail. The monomer reactivity ratios in copolymerization were determined by YBR method, and r₁ (MPBAS) = 2.39 ± 0.05, r₂ (NPMI) = 0.33 ± 0.02. In the presence of ammonium formate, benzyloxycarbonyl groups could be broken fluently from MPBAS segments of copolymer by catalytic transfer hydrogenation, and the copolymer with sulfadiazine side groups are recovered. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2548–2554, 2000     

Radical heterogeneous polymerization behavior of N‐methyl‐α‐fluoroacrylamide in benzene

The polymerization of N‐methyl‐α‐fluoroacrylamide (NMFAm) initiated with dimethyl 2,2′‐azobisisobutyrate (MAIB) in benzene was studied kinetically and with electron spin resonance. The polymerization proceeded heterogeneously with the highly efficient formation of long‐lived poly(NMFAm) radicals. The overall activation energy of the polymerization was 111 kJ/mol. The polymerization rate (R_p) at 50 °C is given by R_p = k[MAIB]^0.75±0.05 [NMFAm]^0.44±0.05. The concentration of the long‐lived polymer radical increased linearly with time. The formation rate (R_p?) of the long‐lived polymer radical at 50 °C is expressed by R_p? = k[MAIB]^1.0±0.1 [NMFAm]^0±0.1. The overall activation energy of the long‐lived radical formation was 128 kJ/mol, which agreed with the energy of initiation (129 kJ/mol), which was separately estimated. A comparison of R_p? with the initiation rate led to the conclusion that 1‐methoxycarbonyl‐1‐methylethyl radicals (primary radicals from MAIB), escaping from the solvent cage, were quantitatively converted into the long‐lived poly(NMFAm) radicals. Thus, this polymerization involves completely unimolecular termination due to polymer radical occlusion. ¹H NMR‐determined tacticities of resulting poly(NMFAm) were estimated to be rr = 0.34, mr = 0.48, and mm = 0.18. The copolymerization of NMFAm(M₁) and St(M₂) with MAIB at 50 °C in benzene gave monomer reactivity ratios of r₁ = 0.61 and r₂ = 1.79. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2196–2205, 2001     

Radical polymerization of new functional monomer: Methacryloyl isocyanate containing 4‐chloro‐1‐phenol

New functional monomer methacryloyl isocyanate containing 4‐chloro‐1‐phenol (CPHMAI) was prepared on reaction of methacryloyl isocyanate (MAI) with 4‐chloro‐1‐phenol (CPH) at low temperature and was characterized with IR, ¹H, and ¹³C‐NMR spectra. Radical polymerization of CPHMAI was studied in terms of the rate of polymerization, solvent effect, copolymerization, and thermal properties. The rate of polymerization of CPHMAI has been found to be smaller than that of styrene under the same conditions. Polar solvents such as dimethylsulfoxide (DMSO) and N,N‐dimethyl formamide (DMF) were found to slow the polymerization. Copolymerization of CPHMAI (M₁) with styrene (M₂) in tetrahydrofuran (THF) was studied at 60°C. The monomer reactivity ratio was calculated to be r₁ = 0.49 and r₂ = 0.66 according to the method of Fineman—Ross. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 469–473, 2000     

Flexibilized styrene‐N‐substituted maleimide copolymers. I. Multiblock copolymers prepared from styrene‐maleimide telechelics and polytetrahydrofuran

Telechelic copolymers of styrene and different N‐substituted‐maleimides (SMIs) with a molecular weight of 2000–8000 g/mol were synthesized using the starved‐feed‐reactor technique and were nearly bifunctional when the monomer feed had a high styrene concentration. The COOH‐terminated rigid SMI blocks were polycondensated with OH‐terminated poly(tetrahydrofuran) (PTHF) blocks, with a molecular weight of 250–1000 g/mol, which are the flexible parts in the generated homogeneous multiblock copolymer. The entanglement density, which is closely related to the toughness of materials, increased in these flexible SMI copolymers (ν_e = 5.2 · 10²⁵ m⁻³) compared to the unflexibilized ones (ν_e = 2.4 · 10²⁵ m⁻³). The glass transition temperature of these flexibilized, single‐phase multiblock copolymers was still high enough to qualify them as engineering plastics. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3550–3557, 2000     

Ring‐opening polymerization of 1,4‐dioxan‐2‐one initiated by lanthanum isopropoxide in bulk

Lanthanum isopropoxide (La(OiPr)₃) has been synthesized and employed for ring‐opening polymerization of 1,4‐dioxan‐2‐one in bulk as a single‐component initiator. The influences of reaction conditions such as initiator concentration, reaction time, and reaction temperature on the polymerization were investigated. The kinetics indicated that the polymerization is first‐order with respect to the monomer concentration. The Mechanistic investigations according to ¹H NMR spectrum analysis demonstrated that the polymerization of PDO proceeded through a coordination‐insertion mechanism with a rupture of the acyl‐oxygen bond of the monomer rather than the alkyl‐oxygen bond cleavage. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5214–5222, 2008     

Synthesis of comb‐like polystyrene with poly(N‐phenyl maleimide‐alt‐p‐chloromethyl styrene) as macroinitiator

The copolymerization of N‐phenyl maleimide and p‐chloromethyl styrene via reversible addition–fragmentation chain transfer (RAFT) process with AIBN as initiator and 2‐(ethoxycarbonyl)prop‐2‐yl dithiobenzoate as RAFT agent produced copolymers with alternating structure, controlled molecular weights, and narrow molecular weight distributions. Using poly(N‐phenyl maleimide‐alt‐p‐chloromethyl styrene) as the macroinitiator for atom transfer radical polymerization of styrene in the presence of CuCl/2,2′‐bipyridine, well‐defined comb‐like polymers with one graft chain for every two monomer units of backbone polymer were obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2069–2075, 2006     

Initiator effect on the cationic ring‐opening copolymerization of 2‐ethyl‐2‐oxazoline and 2‐phenyl‐2‐oxazoline

The aim of this research was to study the effect of the initiator on the resulting monomer distribution for the cationic ring‐opening copolymerization of 2‐ethyl‐2‐oxazoline (EtOx) and 2‐phenyl‐2‐oxazoline (PhOx). At first, kinetic studies were performed for the homopolymerizations of both monomers at 160 °C under microwave irradiation using four initiators. These initiators have the same benzyl‐initiating group but different leaving groups, Cl^?, Br^?, I^?, and OTs^?. The basicity of the leaving group affects the ratio of covalent and cationic propagating species and, thus, the polymerization rate. The observed differences in polymerization rates could be correlated to the concentration of cationic species in the polymerization mixture as determined by ¹H NMR spectroscopy. In a next‐step, polymerization kinetics were determined for the copolymerizations of EtOx and PhOx with these four initiators. The reactivity ratios for these copolymerizations were calculated from the polymerization rates obtained for the copolymerizations. This approach allows more accurate determination of the copolymerization parameters compared to conventional methods using the composition of single polymers. When benzyl chloride (BCl) was used as an initiator, no copolymers could be obtained because its reactivity is too low for the polymerization of PhOx. With decreasing basicity of the used counterions (Br^? > I^? > OTs^?), the reactivity ratios gradually changed from r_EtOx = 10.1 and r_PhOx = 0.30 to r_EtOx = 7.9 and r_PhOx = 0.18. However, the large difference in reactivity ratios will lead to the formation of quasi‐diblock copolymers in all cases. In conclusion, the used initiator does influence the monomer distribution in the copolymers, but for the investigated system the differences were so small that no difference in the resulting polymer properties is expected. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4804–4816, 2008     

Preparation of amphiphilic statistical copolymers of 2‐hydroxyethyl methacrylate with 2‐diethylaminoethyl methacrylate,precursors of water‐soluble copolymers

Statistical copolymers of 2‐hydroxyethyl methacrylate (HEMA) and 2‐diethylaminoethyl methacrylate (DEA) were synthesized at 50 °C by free‐radical copolymerization in bulk and in a 3 mol L^?1 N,N′‐dimethylformamide solution with 2,2′‐azobisisobutyronitrile as an initiator. The solvent effect on the apparent monomer reactivity ratios was attributed to the different aggregation states of HEMA monomer in the different solvents. The copolymers obtained were water‐insoluble at a neutral pH but soluble in an acidic medium when the molar fraction of the DEA content was higher than 0.5. The quaternization of DEA residues increased the hydrophilic character of the copolymers, and they became water‐soluble at a neutral pH when the HEMA content was lower than 0.25. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2427–2434, 2002     

Reversible addition–fragmentation transfer polymerization of p‐nitrophenyl acrylate and synthesis of diblock copolymers poly(p‐nitrophenyl acrylate)‐b‐polystyrene

Poly(p‐nitrophenyl acrylate)s (PNPAs) with different molecular mass and narrow polydispersity were successfully synthesized for the first time by reversible addition–fragmentation transfer (RAFT) polymerization with azobisisobutyronitrile (AIBN) as an initiator and [1‐(ethoxy carbonyl) prop‐1‐yl dithiobenzoate] as the chain‐transfer agent. Although the molecular mass of PNPAs can be controlled by the molar ratio of NPA to RAFT agent and the conversion, a trace of homo‐PNPA was found, especially at the early stage of polymerization. The dithiobenzoyl‐terminated PNPA obtained was used as a macro chain‐transfer agent in the successive RAFT block copolymerization of styrene (St) with AIBN as the initiator. After purification by two washings with cyclohexane and nitromethane to remove homo‐PSt and homo‐PNPA, the pure diblock copolymers, PNPA‐b‐PSt's, with narrow molecular weight distribution were obtained. The structural analysis of polymerization products by ¹H NMR and GPC verified the formation of diblock copolymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4862–4872, 2004     

Synthesis and polymerization of fluorinated monomers bearing a reactive lateral group. XII. Copolymerization of vinylidene fluoride with 2,3,3‐trifluoroprop‐2‐enol

An improved synthesis of 2,3,3‐trifluoroprop‐2‐enol (FA1) and its copolymerization in solution with vinylidene fluoride (VDF, or 1,1‐difluoroethylene) initiated by tert‐butyl peroxypivalate are presented. A new synthesis of FA1, with NaH and lithium diisopropylamine as bases, from 2,2,3,3‐tetrafluoropropanol is described. A series of nine copolymerization reactions were investigated from initial [VDF]₀/[FA1]₀ molar ratios of 9.1/90.9 to 94.2/5.8. The copolymer compositions were calculated via ¹⁹F NMR spectroscopy. From the Tidwell–Mortimer method, the reactivity ratios of both comonomers were determined (r_FA1 = 0.11 ± 0.22 and r_VDF = 0.83 ± 0.77 at 50°C), and they showed an azeotropic point. Alfrey and Price's Q and e values of FA1 were calculated to be 0.0178 (from Q_VDF = 0.008), 0.039 (from Q_VDF = 0.015), and 0.275 (from Q_VDF = 0.036) and 2.74 (vs e_VDF = 1.20), 2.04 (vs e_VDF = 0.50), and 1.94 (vs e_VDF = 0.4), respectively, and they indicated that FA1 is an electron‐accepting monomer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3634–3643, 2002     

Asymmetric cyclopolymerization of N‐tert‐butyl‐N‐allylacrylamide in the presence of β‐cyclodextrin

The radical polymerization of N‐tert‐butyl‐N‐allylacrylamide (t‐BAA) was carried out in a dimethyl sulfoxide/H₂O mixture in the presence of β‐cyclodextrin (β‐CD). The polymerization proceeded with the complete cyclization of the t‐BAA unit and yielded optically active poly(t‐BAA). The IR spectrum of the obtained polymer showed that the cyclic structure in the polymer was a five‐membered ring. The optical activity of poly(t‐BAA) increased with an increasing molar ratio of β‐CD to the t‐BAA monomer. The interaction of β‐CD with t‐BAA was confirmed by ¹H NMR and ¹³C NMR analyses of the polymerization system. It is suggested that interaction of the t‐BAA monomer with the hydrophobic cavity of β‐CD plays an important role in the asymmetric cyclopolymerization of t‐BAA. The radical copolymerization of t‐BAA with styrene (St), methyl methacrylate, ethyl methacrylate, or benzyl methacrylate (BMA) also produced optically active copolymers with a cyclic structure from the t‐BAA unit. St and BMA carrying a phenyl group were predicted to compete with t‐BAA for interaction with β‐CD in the copolymerization system. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2098–2105, 2000     

Atom transfer radical polymerization of n‐butyl acrylate catalyzed by CuBr/N‐(n‐hexyl)‐2‐pyridylmethanimine

The homogeneous atom transfer radical polymerization (ATRP) of n‐butyl acrylate with CuBr/N‐(n‐hexyl)‐2‐pyridylmethanimine as a catalyst and ethyl 2‐bromoisobutyrate as an initiator was investigated. The kinetic plots of ln([M]₀/[M]) versus the reaction time for the ATRP systems in different solvents such as toluene, anisole, N,N‐dimethylformamide, and 1‐butanol were linear throughout the reactions, and the experimental molecular weights increased linearly with increasing monomer conversion and were very close to the theoretical values. These, together with the relatively narrow molecular weight distributions (polydispersity index ～ 1.40 in most cases with monomer conversion > 50%), indicated that the polymerization was living and controlled. Toluene appeared to be the best solvent for the studied ATRP system in terms of the polymerization rate and molecular weight distribution among the solvents used. The polymerization showed zero order with respect to both the initiator and the catalyst, probably because of the presence of a self‐regulation process at the beginning of the reaction. The reaction temperature had a positive effect on the polymerization rate, and the optimum reaction temperature was found to be 100 °C. An apparent enthalpy of activation of 81.2 kJ/mol was determined for the ATRP of n‐butyl acrylate, corresponding to an enthalpy of equilibrium of 63.6 kJ/mol. An apparent enthalpy of activation of 52.8 kJ/mol was also obtained for the ATRP of methyl methacrylate under similar reaction conditions. Moreover, the CuBr/N‐(n‐hexyl)‐2‐pyridylmethanimine‐based system was proven to be applicable to living block copolymerization and living random copolymerization of n‐butyl acrylate with methyl methacrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3549–3561, 2002