Anionic graft polymerization of propylene sulfide on cellulose. II. Absorption of iodine,silver, and mercury on the graft polymers

The adsorption of iodine, silver nitrate, and mercuric chloride by cellulosic membranes grafted with polypropylene sulfide was investigated. It was found that the grafted polypropylene sulfide adsorbed iodine by complexation from aqueous solution or from gaseous phase. Adsorption from water led to the formation of a complex with molar ratio of I₂ to propylene sulfide units of 1, and that while the complex formed from gaseous iodine had a molar ratio I₂ to propylene sulfide approaching 2. Most of the sulfide groups participated in complexation. It was found that the complexation of the polysulfide was accompanied by degradation which was attributed to halogenation of the polysulfide at the tertiary carbon atoms. The iodine complex was more stable in water than in organic solvents, where most of the iodine was desorbed. The graft polymers adsorbed also by complexation silver nitrate and mercuric chloride. Adsorption could be described by a Freundlich type isotherm. At low concentrations most of the silver nitrate present in solution was adsorbed.     

Anionic graft polymerization of ethylene oxide on starch. I

Graft polymers of polyethylene oxide on various starches were obtained by anionic graft polymerization of ethylene oxide on the starch alkoxide derivatives. The polyalkoxides were prepared by reaction of potassium naphthalene with starch in DMSO solution. It was found that increase of monomer or alkoxide concentration led to transformation of the grafts from solids to syrups. Rice starch, having a more complex structure than soluble starch or wheat starch, led to graft polymers having higher melting ranges than the others. The graft polymers were very soluble in water or methanol.     

Anionic grafting polymerization of propylene sulfide onto human hair in water

Natural human hair was modified by the graft polymerization of propylene sulfide in an aqueous medium. The amount of the polymer grafted onto the reduced hair was 0.15–0.19 g on 1.0 g of hair. The grafted polymer was isolated by the hydrolysis of the hair in the polymer‐grafted hair under basic conditions and was confirmed to be poly(propylene sulfide) by ¹H NMR, ¹³C NMR, and Fourier transform infrared spectra. The number‐average molecular weights of the isolated polymers from the grafted products were 10,000–12,000. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3778–3786, 2006     

Anionic polymerization of propylene oxide

The anionic polymerization of propylene oxide with the use of potassium tert-butoxide and naphthalene sodium as initiator and dimethylsulfoxide, tetrahydrofuran and mixtures of both as solvent was investigated. The reactions were carried out in vacuum-sealed dilatometers over the temperature range 20?60°C. The products were analyzed by gelpermeation chromatography and infrared spectroscopy. The object of the investigation was to obtain information on the mechanism of the reaction and elucidate some of its kinetic aspects. It is shown that the polymerization occurs by two different processes depending on the experimental conditions: one involving free ions and ion-pairs, the other, ion-pairs alone. In the first case, where DMSO was used as solvent, the order of the reaction with respect to the initiator is greater than unity (～1.7), while in the second case, involving the mixture of DMSO and THF and ion-pairs alone, the reaction order is only one. Transfer to monomer is believed to take place only in the strongly dissociating DMSO medium, where free ions are present.     

Anionic graft polymerization of ethylene oxide on starch. II. Structure of the graft polymers

Starch–poly(ethylene oxide) graft polymers were prepared in DMSO at various monomer and starch alkoxide concentrations. Complimentary and varied information on the structure of the graft polymers was obtained from NMR and periodic acid oxidation of the polymers. From the NMR spectra of the graft polymers in pyridine containing a trace of HCl, which causes shifting of the resonance of the internal ? CH₂O? protons from the terminal ? CH₂OH protons, the polyethylene oxide content, the DP _n of the grafted side chains, and the efficiency of the alkoxides were calculated. With increase of the alkoxide concentration there was a small decrease in ? DP _n, and in the efficiency of the alkoxides in initiating graft polymerization. With increase of monomer concentration, there was only a small increase in ? DP _n but a large increase in the efficiency, indicating the existence of transfer reactions between the growing anions and the free hydroxyl groups on the starch. The results of he periodic acid oxidation showed that with increase of alkoxide concentration there was no significant change in the per cent oxidation of the graft polymers, but with increase of monomer, there was an increase in the participation of the secondary hydroxyl groups in initiation. This supports the NMR evidence for the existence of transfer reactions leading to ? DP _n values much lower than those calculated from [monomer]/[catalyst] ratios.     

Anionic graft polymerization of methacrylonitrile on potassium starch alkoxide

The anionic graft polymerization of methacrylonitrile on potassium starch alkoxide in dimethyl sulfoxide was studied. Factors affecting the graft polymerization such as monomer and alkoxide concentrations as well as temperature were investigated. The yield of the graft polymers was found to increase with alkoxide concentration, and it was possible to incorporate all the starch into graft polymer. On increasing the monomer concentration the graft polymer yield increased to a flat maximum. At the higher monomer concentrations, the efficiency of monomer in giving graft polymer decreased due to increased homopolymer formation. The composition of the graft polymers varied with increasing monomer concentration, graft polymers having about 40–65% of grafted starch were obtained. With increasing temperature (10 to 60°C), the yield of graft polymer decreased, there was more homopolymerization, but the amount of starch incorporated in the graft remained constant. The structure of the graft polymers was deduced from hydrolysis of the starch backbone of the graft polymers by dilute mineral acid and the determination of the molecular weights of the grafted side chains, and from oxidation by periodic acid, which showed the extent of grafting at the secondary hydroxyl groups. These results have shown that by anionic graft polymerization it is possible to obtain graft polymers having more densely packed grafted side chains of relatively low molecular weights than those obtained previously by free-radical graft polymerization.     

Anionic graft polymerization of methyl methacrylate on starch and dextrin

The anionic graft polymerization of methyl methacrylate on the potassium alkoxide derivative of starch or dextrin in DMSO was studied. The effects of monomer and alkoxide concentrations as well as temperature were investigated. The yield of graft polymer increased with increasing alkoxide concentration. With increasing monomer concentration and with increasing temperature the extent of homopolymer formation increased. The composition of the graft polymers was found to depend on the reaction conditions. Graft polymers having about 10–40% poly(methyl methacrylate) were obtained. There were quantitative differences in yield of isolated graft polymer between starch and dextrin and these were ascribed to differences in the solubility properties of the carbohydrates. Evidence on the structure of the graft polymers and on the mechanism of the graft polymerization was obtained from acid hydrolysis of the graft polymers and determination of the molecular weights of the cleaved side chains.     

Anionic dispersion polymerization. I. control of particle size

Studies on the mechanism for the formation of the stable dispersion polystyrene prepared by anionic dispersion polymerization of styrene in n-hexane using poly(t-butylstyrene) as the stabilizing moiety in steric stabilizer have been performed by a combination of size exclusion chromatographic (SEC) and transmission electron microscopic (TEM) analyses. When the molecular weight of poly(t-butylstyrene) as the stabilizing moiety exceeded 1.76 X 10⁴ g/mol, the formed polymer particles successfully retained a steric stability. Block copolymerization of t-butylstyrene and styrene in n-hexane has also provided the dispersion polymer particles with a relatively narrow size distribution. The stable dispersion polystyrenes have been produced in n-hexane by polymerization of styrene using the mixture of sec-butyllithium and poly(t-butylstyryl)lithium. The polymerization is called living dispersion polymerization (LDP), in which poly(t-butylstyrene-b-styrene) as the steric stabilizer and polystyrene can be formed simultaneously. The particle size was readily controlled by a combination of the concentration of monomer and the molar ratio of poly(t-butylstyryl)lithium to sec-butyllithium, for instance, [stabilizing moiety]/[RLi]. © 1996 John Wiley & Sons, Inc.     

Anionic graft polymerization and homopolymerization of phenyl glycidyl ether

Phenyl glycidyl ether was found to react with potassium starch alkoxide in dimethyl sulfoxide (DMSO) to give graft polymers in almost quantitative yields, both the monomer and the starch being incorporated completely into the graft polymer. No transfer reactions to monomer or solvent leading to homopolymerization was found. For this reason this system was used as a model for the study of the rate of the graft polymerization of alkylene oxides on starch and other carbohydrates. Comparison of the rates of the graft polymerization of phenyl glycidyl ether on starch alkoxide with that of the homopolymerization by potassium naphthalene in DMSO under comparable conditions showed that the former reaction was much slower. Rates of the graft polymerizations on dextrin and sucrose under comparable conditions, were similar to those obtained with starch. On the other hand, the rates of polymerization on poly(ethylene oxide) alkoxides of different molecular weights were similar to those obtained in the corresponding homopolymerization by potassium naphthalene, showing that neither the molecular weight of the initiator nor the viscosity of the reaction medium were the governing factors. This suggested that the lower rates obtained by using the carbohydrate alkoxides as initiators were connected with the heterogeneity of these reaction systems, the polymeric alkoxide being insoluble in DMSO. The systematic study carried out on the homopolymerization by potassium naphthalene in DMSO showed that the effective initiator was dimsyl anion obtained by interaction of potassium naphthalene with DMSO. The reaction was bimolecular, being first order to monomer and to initiator. The molecular weights increased with increasing monomer concentration and decreasing catalyst concentration, in accordance with a “living” polymerization system.     

Anionic graft polymerization of methyl acrylate to protein functional groups

Graft polymerization of methyl acrylate to functional groups in proteins was studied with model compounds and with whole gluten proteins. Polymerization was carried out in the presence of sodium hydride or sodium in dimethyl sulfoxide. Initiation proceeds by an anionic mechanism, and the rate-determining step is the production of the initially formed carbanion. The rate of disappearance of methyl acrylate was followed via gas chromatography. Amino acid analyses indicated that the functional groups of the amino acids, as well as the peptide bonds, were acting as the initiation sites in proteins. Reaction rates of the functional groups were determined on model compounds in the presence of sodium and sodium hydride. With both the model compounds and the proteins, polymerization was initially rapid and then leveled off, although rates depended on the concentration of activator and acrylate. Methoxyl group analyses of modified model compounds and proteins indicated that from 5 to 10 methyl acrylate residues were introduced per reactive site.     

Anionic polymerization of acrylates. I. Polymerization of 2-ethylhexylacrylate in nonpolar solvents

Initiation with a combined initiator n-butyllithium/lithium tert-butoxide in the ratio 1:6 brings the anionic polymerization of 2-ethylhexylacrylate (EtHA) in toluene and n-heptane at temperatures between ?78 and ?20°C up to a quantitative conversion. In the initial stages of the process the molecular weight distribution (MWD) of the products is polymodal as a result of the stablizing function of the alkoxide; MWD of the final product after a complete consumption of the monomer is medium, being visibly dependent on the reaction temperature and without any distinct content of low-molecular weight components, which suggests a sufficient activity of all growth centers, and thus an essential restriction of side termination reactions.     

Anionic polymerization of propylene oxide: Isomerization of allyl ether to propenyl ether end groups

The isomerization of allyl ether to propenyl ether end group in anionically-polymerized poly (propylene oxide) was monitored by ¹H NMR spectroscopy. It was confirmed that the reaction followed a simple second-order rate law: ?d[allyl]dt = k₂[allyl] [O^?]. Values of k₂ determined over the 90–130°C temperature range, indicated an activation energy of 116 kJ mol^?1. © 1994 John Wiley & Sons, Inc.     

Anionic ring‐opening polymerization of propylene oxide in the presence of phosphonium catalysts

Anionic ring‐opening polymerization of propylene oxide in the presence of potassium alcoholate initiator was accelerated by addition of the bulky phosphonium salt tetrakis[cyclohexyl(methyl)amino]phosphonium‐tetrafluoroborate. Dipropylene glycol (DPG) was partially deprotonated (5%) and used as an initiator for the polymerization performed at 100 °C at normal pressure. The delocalization of the positive charge over five atoms promoted the formation of a separated ion pair, thus enhancing nucleophilicity and reactivity. Compared with those of polyaminophosphazenes and tetrabutylphosphonium cation, the average propagation rates increased in the order of Bu₄P⁺, K⁺, P, P, and ^tBuP₄H⁺. DP_n for the polymers was in the range of 20–64. Characterization of poly(propylene oxide)s by means of ¹H NMR, size exclusion chromatography (SEC), and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF‐MS) showed low polydispersities (M_w/M_n) without any byproducts or impurities. The M_w/M_n obtained was 1.03–1.09 (MALDI‐TOF‐MS) and 1.11–1.15 (SEC), respectively. Values calculated from titration of the hydroxyl groups showed good agreement. Determination of the total degree of unsaturation in the range of 13–60 mmol/kg indicated larger amounts with increasing polymerization rates. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 864–873, 2002; DOI 10.1002/pola.10163     

Anionic graft polymerization of lithiated poly(2,6-dimethyl-1,4-phenylene ether)

Lithiated poly(2,6-dimethyl-1,4-phenylene ether) has been used as an initiator for the graft polymerization of isoprene, methyl methacrylate, hexamethylcyclotrisiloxane, and phenyl isocyanate with the use of toluene and tetrahydrofuran as solvents. The products were examined by gel-permeation chromatography for evidence of homopolymerization and graft polymerization. The composition of the graft copolymers was determined by NMR, and for isoprene and hexamethylcyclotrisiloxane, termination by trialkylchlorosilanes enabled chain lengths to be determined by NMR. The use of toluene gave rise to some homopolymerization, but with tetrahydrofuran, only hexamethylcyclotrisiloxane gave homopolymer. In all cases, graft copolymers were formed. With isoprene and methyl methacrylate, soluble graft copolymers were formed in good yield. In the former case approximately 60% 3,4 and 40% 1,4 addition was found. In the latter case 1,1-diphenylethylene was used to reduce crosslinking, in its absence, methyl methacrylate gave only crosslinked gels in tetrahydrofuran. Hexamethylcyclotrisiloxane added only one molecule per lithium on the polymer, the remainder giving homopolymer. Phenyl isocyanate gave some soluble graft copolymer in toluene, but only crosslinked products were obtained when tetrahydrofuran was used as reaction solvent.     

Anionic polymerization of methacrylonitrile—I. Polymerization with n-butyllithium as initiator

The anionic polymerization of methacrylonitrile has been studied at ?75° in toluene and with n-butyllithium as initiator. The kinetics of the polymerization were investigated considering the consumption of both monomer and initiator. BuLi disappears relatively slowly and about 50–60% remains unreacted. A simple kinetic scheme cannot therefore be put forward. All possible side reactions have also been examined. The molecular weight study establishes the living character of this system and gives an initiator efficiency of about 0.2. The contribution of low molecular weight products, typical of the polymerization of polar monomers, is also taken into account. In order to obtain a better understanding of the mechanism of this polymerization, in which unreacted initiator is probably engaged in very stable and inactive mixed associated particles, small amounts of THF (known frequently to break down such aggregates) were added to the system. A rather unexpected slow but complete disappearance of the initiator occurs; the conversion at which the rate of monomer consumption levels off depends on the THF concentration.     

Relationships of graft polymerization of vinyl monomers onto cellulose. Reaction kinetics and polymer structure

Graft polymerization of acrylamide and sulfuric salt of 2-methyl-5 vinylpyridine onto cellulose using CO(III) salts was studied. It was shown that graft polymerisation of water-soluble polymers can be described by general relationships of radical reaction. The relation between elementary reaction constants of the formation and termination of active centers in cellulose, as well as relation between constants of the propagation, transfer and termination of chains were determined for different cellulose materials and monomers. The translational diffusion, sedimentation, viscosity, and flow birefringence of copolymers have been investigated in different solvents. Experimental data showed that the copolymers obtained are graft copolymers with two to five grafted chains onto macromolecules. The minimum distance between the branch points is 100 ± 20 glucoside units. The peculiarity of these copolymers is relatively low polydispersity. The conformation of macromolecules of such copolymers in solution depends on the compatibility of the copolymer components and the thermodynamic properties of the solvent.