Batch scheduling and common due-date assignment on a single machine

We consider the problem of scheduling n groups of jobs on a single machine where three types of decisions are combined: scheduling, batching and due-date assignment. Each group includes identical jobs and may be split into batches; jobs within each batch are processed jointly. A sequence independent machine set-up time is needed between each two consecutively scheduled batches of different groups. A due-date common to all jobs has to be assigned. A schedule specifies the size of each batch, i.e. the number of jobs it contains, and a processing order for the batches. The objective is to determine a value for the common due-date and a schedule so as to minimize the sum of the due date assignment penalty and the weighted number of tardy jobs. Several special cases of this problem are shown to be ordinary NP-hard. Some cases are solved in O(n log n) time. Two pseudopolynomial dynamic programming algorithms are presented for the general problem, as well as a fully polynomial approximation scheme.     

Single machine group scheduling with resource dependent setup and processing times

A single machine scheduling problem is studied. There is a partition of the set of n jobs into g groups on the basis of group technology. Jobs of the same group are processed contiguously. A sequence independent setup time precedes the processing of each group. Two external renewable resources can be used to linearly compress setup and job processing times. The setup times are jointly compressible by one resource, the job processing times are jointly compressible by another resource and the level of the resource is the same for all setups and all jobs. Polynomial time algorithms are presented to find an optimal job sequence and resource values such that the total weighted resource consumption is minimum, subject to meeting job deadlines. The algorithms are based on solving linear programming problems with two variables by geometric techniques.     

Single Machine Group Scheduling with Two Ordered Criteria

The problem of scheduling jobs on a single machine is considered. It is assumed that the jobs are classified into several groups and the jobs of the same group have to be processed contiguously. A sequence independent set-up time is incurred between each two consecutively scheduled groups. A schedule is specified by a sequence for the groups and a sequence for the jobs in each group. The quality of a schedule is measured by two critera ordered by their relative importance. The objective is to minimize the maximum cost, the secondary criterion, subject to the schedule is optimal with respect to total weighted completion time, the primary criterion. A polynomial time algorithm is presented to solve this bicriterion group scheduling problem. It is shown that this algorithm can also be modified to solve the single machine group scheduling problem with several ordered maximum cost criteria and arbitrary precedence constraints.     

Group Scheduling with Controllable Setup and Processing Times: Minimizing Total Weighted Completion Time

The following single machine scheduling problem is studied. A partition of a set of n jobs into g groups on the basis of group technology is given. The machine processes jobs of the same group contiguously, with a sequence independent setup time preceding the processing of each group. The setup times and the job processing times are controllable through the allocation of a continuously divisible or discrete resource to them. Each job uses the same amount of the resource. Each setup also uses the same amount of resource, which may be different from that for the jobs. Polynomial-time algorithms are constructed for variants of the problem of finding an optimal job sequence and resource values so as to minimize the total weighted job completion time, subject to given restrictions on resource consumption. The algorithms are based on a polynomial enumeration of the candidates for an optimal job sequence and solving the problem with a fixed job sequence by linear programming. This research was supported in part by The Hong Kong Polytechnic University under grant number G-T246 and the Research Grants Council of Hong Kong under grant number PolyU 5191/01E. In addition, the research of M.Y. Kovalyov was supported by INTAS under grant number 00-217.     

Some Generalisations of the Time Minimising Assignment Problem

The time minimising assignment problem is the problem of finding an assignment of n jobs to n facilities, one to each, which minimises the total time for completing all the jobs. The usual assumption made in these problems is that all the jobs are commenced simultaneously. In this paper two generalisations of this assumption are considered, and algorithms are presented to solve these general problems. Numerical examples are worked out illustrating the algorithms.     

Scheduling in a contaminated area: A model and polynomial algorithms

There are n jobs to be scheduled in a contaminated area. The jobs can be rescue, de-activation or cleaning works to be executed by a single worker in an area contaminated with radio-active or chemical materials. Precedence relations can be given on the set of jobs. An execution of each job can be preempted. However, the length of the minimal uninterrupted work period is given and it is the same for all jobs. Each work period for a job should be accompanied by a rest period whose length depends on the start time of the work period and its length. We focus on a short term planning problem. We show that this problem can be modelled by a scheduling problem with start time dependent job processing times. The dependency functions are exponentially decreasing ones. We also construct two polynomial time algorithms for the both cases—with and without precedence constraints.     

A comparison of heuristic algorithms for flow shop scheduling problems with setup times and limited batch size

In this paper, we propose different heuristic algorithms for flow shop scheduling problems, where the jobs are partitioned into groups or families. Jobs of the same group can be processed together in a batch but the maximal number of jobs in a batch is limited. A setup is necessary before starting the processing of a batch, where the setup time depends on the group of the jobs. In this paper, we consider the case when the processing time of a batch is given by the maximum of the processing times of the operations contained in the batch. As objective function we consider the makespan as well as the weighted sum of completion times of the jobs. For these problems, we propose and compare various constructive and iterative algorithms. We derive suitable neighbourhood structures for such problems with batch setup times and describe iterative algorithms that are based on different types of local search algorithms. Except for standard metaheuristics, we also apply multilevel procedures which use different neighbourhoods within the search. The algorithms developed have been tested in detail on a large collection of problems with up to 120 jobs.     

Minimizing makespan on a two-machine re-entrant flowshop

This paper focuses on a two-machine re-entrant flowshop scheduling problem with the objective of minimizing makespan. In the re-entrant flowshop considered here, all jobs must be processed twice on each machine, that is, each job should be processed on machine 1, machine 2 and then machine 1 and machine 2. We develop dominance properties, lower bounds and heuristic algorithms for the problem, and use these to develop a branch and bound algorithm. For evaluation of the performance of the algorithms, computational experiments are performed on randomly generated test problems. Results of the experiments show that the suggested branch and bound algorithm can solve problems with up to 200 jobs in a reasonable amount of CPU time.     

Single machine scheduling with common due date assignment in a group technology environment

We consider a scheduling problem in which n jobs are grouped into F groups and are to be processed on a single machine. A machine setup time is required when the machine switches from one group of jobs to the other. All jobs have a common due date that needs to be determined. The objective is to find an optimal common due date and an optimal sequence of jobs to minimize the sum of the cost of tardy jobs and the cost related to the common due date. We consider two cases:

• 1.(i) the jobs have to be processed in groups; and
• 2.(ii) the jobs do not have to be processed in groups.

Analytical results are presented and computational algorithms are developed.     

Serial-batching group scheduling with release times and the combined effects of deterioration and truncated job-dependent learning

This paper investigates a single machine serial-batching scheduling problem considering release times, setup time, and group scheduling, with the combined effects of deterioration and truncated job-dependent learning. The objective of the studied problem is to minimize the makespan. Firstly, we analyze the special case where all groups have the same arrival time, and propose the optimal structural properties on jobs sequencing, jobs batching, batches sequencing, and groups sequencing. Next, the corresponding batching rule and algorithm are developed. Based on these properties and the scheduling algorithm, we develop a hybrid VNS–ASHLO algorithm incorporating variable neighborhood search (VNS) and adaptive simplified human learning optimization (ASHLO) algorithms to solve the general case of the studied problem. Computational experiments on randomly generated instances are conducted to compare the proposed VNS–ASHLO with the algorithms of VNS, ASHLO, Simulated Annealing (SA), and Particle Swarm Optimization (PSO). The results based on instances of different scales show the effectiveness and efficiency of the proposed algorithm.     

Minimizing due date related performance measures on two batch processing machines

This paper considers a scheduling problem in a two-machine flowshop of two batch processing machines. On each batch processing machine, jobs are processed in a batch, and each batch is allowed to contain jobs up to the maximum capacity of the associated machine. The scheduling problem is analyzed with respect to three due date related objectives including maximum tardiness, number of tardy jobs and total tardiness. In the analysis, several solution properties are characterized and based upon these properties, three efficient polynomial time algorithms are developed for minimizing the due date related measures.     

需要安装时间的平行多功能机排序问题的启发式算法

考虑需要安装时间的平行多功能机排序问题。在该模型中,每个工件对应机器集合的一个子集,其只能在这个子集中的任一台机器上加工,称这个子集为该工件的加工集合;工件分组,同组工件具有相同的加工时间和加工集合,不同组中的工件在同一台机器上连续加工需要安装时间,目标函数为极小化最大完工时间。对该问题NP-难的一般情况设计启发式算法:首先按照特定的规则将所有工件组都整组地安排到各台机器上,然后通过在各机器间转移工件不断改进当前最大完工时间。通过与下界的比较检验算法的性能,大量的计算实验表明,算法是实用而有效的。     

Minimizing maximum lateness of jobs in inventory constrained scheduling

This paper focuses on a machine scheduling problem having applications in truck scheduling at transshipment terminals. Jobs increase and decrease, respectively, the level of a central inventory. Naturally, jobs decreasing the inventory level can be processed only if the level of the inventory is high enough not to drop below zero. We consider the problem to find a schedule for jobs such that the maximum lateness among all jobs is minimized. We develop properties of optimal solutions, lower bounds, and heuristic methods in order to find upper bounds. These are incorporated in four branch and bound algorithms that are based on fixing sequences of jobs in forward or backward direction in two different types of representations. By means of a computational study, we compare these approaches with each other in order to show their efficiency.     

A survey of algorithms for the generalized assignment problem

This paper surveys algorithms for the well-known problem of finding the minimum cost assignment of jobs to agents so that each job is assigned exactly once and agents are not overloaded. All approaches seem to be based on branch-and-bound with bound supplied through heuristics and through relaxations of the primal problem formulation. From the survey one can select building blocks for the design of one's own tailor-made algorithm. The survey also reveals that although just about every mathematical programming technique was tried on this problem, there is still a lack of a representative set of test problems on which competing enumeration algorithms can be compared, as well as a shortage of effective heuristics.     

Dynamic Programming State-Space Relaxation for Single-Machine Scheduling

The problem of sequencing jobs on a single machine to minimize total cost is considered. Machine capacity constraints require that, at any time, at most one job is processed. Also, no machine idle-time between processing jobs is allowed. In contrast to most research, it is not assumed that the cost is a non-decreasing function of completion time. A dynamic programming formulation of the problem is presented. Since the number of states required by this formulation is prohibitively large, the possibilities for branch and bound algorithms are explored. It is shown that the dynamic programming formulation can be relaxed by mapping the state-space onto a smaller state-space and performing the recursion on this smaller state-space, thereby giving a lower bound. Techniques for improving this lower bound through the use of penalties and through the use of state-space modifiers are discussed. Computational results are presented for the problem in which each job has a due date, and the objective is to minimize the sum of holding costs for jobs completed before their due date and tardiness costs for jobs completed after their due date.     

Single machine scheduling with family setups to minimize total earliness and tardiness

This paper considers the problem of scheduling a given number of jobs on a single machine to minimize total earliness and tardiness when family setup times exist. The paper proposes optimal branch-and-bound algorithms for both the group technology assumption and if the group technology assumption is removed. A heuristic algorithm is proposed to solve larger problems with the group technology assumption removed. The proposed algorithms were empirically evaluated on problems of various sizes and parameters. The paper also explores how the choice of procedure affects total earliness and tardiness if an implementation of lean production methods has resulted in a reduction in setup times. An important finding of these empirical investigations is that scheduling jobs by removing the group technology assumption can significantly reduce total earliness and tardiness.     

Branch-and-bound algorithms for scheduling in permutation flowshops to minimize the sum of weighted flowtime/sum of weighted tardiness/sum of weighted flowtime and weighted tardiness/sum of weighted flowtime,weighted tardiness and weighted earliness of jobs

The problem of scheduling in permutation flowshops is considered in this paper with the objectives of minimizing the sum of weighted flowtime/sum of weighted tardiness/sum of weighted flowtime and weighted tardiness/sum of weighted flowtime, weighted tardiness and weighted earliness of jobs, with each objective considered separately. Lower bounds on the given objective (corresponding to a node generated in the scheduling tree) are developed by solving an assignment problem. Branch-and-bound algorithms are developed to obtain the best permutation sequence in each case. Our algorithm incorporates a job-based lower bound (integrated with machine-based bounds) with respect to the weighted flowtime/weighted tardiness/weighted flowtime and weighted tardiness, and a machine-based lower bound with respect to the weighted earliness of jobs. The proposed algorithms are evaluated by solving many randomly generated problems of different problem sizes. The results of an extensive computational investigation for various problem sizes are presented. In addition, one of the proposed branch-and-bound algorithms is compared with a related existing branch-and-bound algorithm.     

A permutation flow-shop scheduling problem with convex models of operation processing times

The paper is an extension of the classical permutation flow-shop scheduling problem to the case where some of the job operation processing times are convex decreasing functions of the amounts of resources (e.g., financial outlay, energy, raw material) allocated to the operations (or machines on which they are performed). Some precedence constraints among the jobs are given. For this extended permutation flow-shop problem, the objective is to find a processing order of the jobs (which will be the same on each machine) and an allocation of a constrained resource so as to minimize the duration required to complete all jobs (i.e., the makespan). A computational complexity analysis of the problem shows that the problem is NP-hard. An analysis of the structure of the optimal solutions provides some elimination properties, which are exploited in a branch-and-bound solution scheme. Three approximate algorithms, together with the results of some computational experiments conducted to test the effectiveness of the algorithms, are also presented. This revised version was published online in June 2006 with corrections to the Cover Date.     

Minimizing flow time in a flow-line manufacturing cell with family setup times

This paper considers the problem of scheduling part families and jobs within each part family in a flowline manufacturing cell with independent family setup times where parts (jobs) in each family are processed together. The objective is to minimize total flow time. A branch-and-bound algorithm capable of solving moderate sized problems is developed. Several heuristic algorithms are proposed and empirically evaluated as to their effectiveness and efficiency in finding optimal permutation schedules. These results show that several heuristic algorithms generate solutions that are better than those generated by an existing genetic algorithm.     

Two-parallel machines scheduling with rate-modifying activities to minimize total completion time

This paper considers the two-parallel machines scheduling problem with rate-modifying activities. In this model, each machine has a rate-modifying activity that can change the processing rate of machine under consideration. Hence the actual processing times of jobs vary depending on whether the job is scheduled before or after the rate-modifying activity. We need to make a decision on when to schedule the rate-modifying activities and the sequence of jobs to minimize some objective function. We provide polynomial and pseudo-polynomial time algorithms to solve the total completion time minimization problem and total weighted completion time minimization problem under agreeable ratio condition.