Non-Interpenetrated Single-Crystal Covalent Organic Frameworks

Growth of covalent organic frameworks (COFs) as single crystals is extremely challenging. Inaccessibility of open-structured single-crystal COFs prevents the exploration of structure-oriented applications. Herein we report for the first time a non-interpenetrated single-crystal COF, LZU-306, which possesses the open structure constructed exclusively via covalent assembly. With a high void volume of 80 %, LZU-306 was applied to investigate the intrinsic dynamics of reticulated tetraphenylethylene (TPE) as the individual aggregation-induced-emission moiety. Solid-state ²H NMR investigation has determined that the rotation of benzene rings in TPE, being the freest among the reported cases, is as fast as 1.0×10⁴ Hz at 203 K to 1.5×10⁷ Hz at 293 K. This research not only explores a new paradigm for single-crystal growth of open frameworks, but also provides a unique matrix-isolation platform to reticulate functional moieties into a well-defined and isolated state.     

Hydrogen‐Bonded Organic Frameworks (HOFs): A New Class of Porous Crystalline Proton‐Conducting Materials

Two porous hydrogen‐bonded organic frameworks (HOFs) based on arene sulfonates and guanidinium ions are reported. As a result of the presence of ionic backbones appended with protonic source, the compounds exhibit ultra‐high proton conduction values (σ) 0.75× 10^?2 S cm^?1 and 1.8×10^?2 S cm^?1 under humidified conditions. Also, they have very low activation energy values and the highest proton conductivity at ambient conditions (low humidity and at moderate temperature) among porous crystalline materials, such as metal–organic frameworks (MOFs) and covalent organic frameworks (COFs). These values are not only comparable to the conventionally used proton exchange membranes, such as Nafion used in fuel cell technologies, but is also the highest value reported in organic‐based porous architectures. Notably, this report inaugurates the usage of crystalline hydrogen‐bonded porous organic frameworks as solid‐state proton conducting materials.     

High‐Flux Membranes Based on the Covalent Organic Framework COF‐LZU1 for Selective Dye Separation by Nanofiltration

Covalent organic frameworks (COFs) are attractive candidates for advanced water‐treatment membranes owing to their high porosity and well‐organized channel structures. Herein, the continuous two‐dimensional imine‐linked COF‐LZU1 membrane with a thickness of only 400 nm was prepared on alumina tubes by in situ solvothermal synthesis. The membrane shows excellent water permeance (ca. 760 L m^?2 h^?1 MPa^?1) and favorable rejection rates exceeding 90 % for water‐soluble dyes larger than 1.2 nm. The water permeance through the COF‐LZU1 membrane is much higher than that of most membranes with similar rejection rates. Long‐time operation demonstrates the outstanding stability of the COF‐LZU1 membrane. As the membrane has no selectivity for hydrated salt ions (selectivity <12 %), it is also suitable for the purification of dye products from saline solutions. The excellent performance and the outstanding water stability render the COF‐LZU1 membrane an interesting system for water purification.     

A Pyrolysis‐Free Covalent Organic Polymer for Oxygen Reduction

Highly efficient electrocatalysts derived from metal–organic frameworks (MOFs) and covalent organic frameworks (COFs) for oxygen reduction reaction (ORR) have been developed. However, the subsequent pyrolysis is often needed owing to their poor intrinsic electrical conductivity, leading to undesirable structure changes and destruction of the original fine structure. Now, hybrid electrocatalysts were formed by self‐assembling pristine covalent organic polymer (COP) with reduced graphene oxide (rGO). The electrical conductivity of the hybridized COP/rGO materials is increased by more than seven orders of magnitude (from 3.06×10^?9 to 2.56×10^?1 S m^?1) compared with pure COPs. The ORR activities of the hybrid are enhanced significantly by the synergetic effect between highly active COP and highly conductive rGO. This COP/rGO hybrid catalyst exhibited a remarkable positive half‐wave (150 mV).     

Three‐Dimensional Anionic Cyclodextrin‐Based Covalent Organic Frameworks

Three‐dimensional covalent organic frameworks (3D COFs) are promising crystalline materials with well‐defined structures, high porosity, and low density; however, the limited choice of building blocks and synthetic difficulties have hampered their development. Herein, we used a flexible and aliphatic macrocycle, namely γ‐cyclodextrin (γ‐CD), as the soft struts for the construction of a polymeric and periodic 3D extended network, with the units joined via tetrakis(spiroborate) tetrahedra with various counterions. The inclusion of pliable moieties in the robust open framework endows these CD‐COFs with dynamic features, leading to a prominent Li ion conductivity of up to 2.7 mS cm⁻¹ at 30 °C and excellent long‐term Li ion stripping/plating stability. Exchanging the counterions within the pores can effectively modulate the interactions between the CD‐COF and CO₂ molecules.     

Photostimulus‐Responsive Large‐Area Two‐Dimensional Covalent Organic Framework Films

Using an external stimulus to modulate the electronic structure of covalent organic frameworks (COFs) is very important because such a response will endow them with additional functions. A two‐dimensional (2D) COF, constructed from a photo‐responsive unit (1,2‐bis(5‐formyl‐2‐methylthien‐3‐yl)cyclopentene), can reversibly switch its electrical conductivity 200 times from low state (the open form) to high state (the closed form) upon irradiation with UV light and reversible with visible light. This reversible phenomenon can be monitored through a circuit containing a light‐emitting diode (LED). Photoinduced ring‐closing/opening reactions do not destroy the integrity of the frameworks, and both processes follow logarithmic carrier generation with time. Moreover, the correlation between COFs electronic properties and changes in photoinduced kinetics and absorption curves has been demonstrated.     

Vinylene‐Linked Covalent Organic Frameworks by Base‐Catalyzed Aldol Condensation

Two 2D covalent organic frameworks (COFs) linked by vinylene (?CH=CH?) groups (V‐COF‐1 and V‐COF‐2) are synthesized by exploiting the electron deficient nature of the aromatic s‐triazine unit of C₃‐symmetric 2,4,6‐trimethyl‐s‐triazine (TMT). The acidic terminal methyl hydrogens of TMT can easily be abstracted by a base, resulting in a stabilized carbanion, which further undergoes aldol condensation with multitopic aryl aldehydes to be reticulated into extended crystalline frameworks (V‐COFs). Both V‐COF‐1 (with terepthalaldehyde (TA)) and V‐COF‐2 (with 1,3,5‐tris(p‐formylphenyl)benzene (TFPB)) are polycrystalline and exhibit permanent porosity and BET surface areas of 1341 m² g^?1 and 627 m² g^?1, respectively. Owing to the close proximity (3.52 Å) of the pre‐organized vinylene linkages within adjacent 2D layers stacked in eclipsed fashion, [2+2] photo‐cycloadditon in V‐COF‐1 formed covalent crosslinks between the COF layers.     

Stable 2D Heteroporous Covalent Organic Frameworks for Efficient Ionic Conduction

Two‐dimensional (2D) covalent organic frameworks (COFs) feature open and ordered one‐dimensional column nanochannels which offer immense possibilities for incorporation of various guests for specific functions. However, the relatively low chemical stability of most COFs originating from the dynamic covalent linkages hinders their practical application. In this work, a highly crystalline and heteroporous dibenzo[g,p]chrysene‐based COF (DBC‐2P) was synthesized and served as a host material for ionic conduction. DBC‐2P exhibits excellent stability both in strong acid and base due to the large conjugated DBC‐based knot that reinforces the interlayer interactions. Subsequent encapsulation of linear polyethylene glycol (PEG) and PEG‐LiBF₄ salt into the nanochannels of DBC‐2P affords a hybrid material with a high ionic conductivity of 2.31×10^?3 S cm^?1. This work demonstrates an efficient post‐synthetic strategy for the development of new COF–polymer composites with intriguing properties.     

Isostructural Three‐Dimensional Covalent Organic Frameworks

Herein, we reported the designed synthesis of three isostructural three‐dimensional covalent organic frameworks (3D COFs) with ‐H, ‐Me, or ‐F substituents, which have similar crystallinity and topology. Their crystal structures were determined by continuous rotation electron diffraction (cRED), and all three 3D COFs were found to adopt a fivefold interpenetrated pts topology. More importantly, the resolution of these cRED datasets reached up to 0.9–1.0 Å, enabling the localization of all non‐hydrogen atomic positions in a COF framework directly by 3D ED techniques for the first time. In addition, the precise control of the pore environments through the use of different functional groups led to different selectivities for CO₂ over N₂. We have thus confirmed that polycrystalline COFs can be definitely studied to the atomic level as other materials, and this study should also inspire the design and synthesis of 3D COFs with tailored pore environments for interesting applications.     

Superprotonic Conductivity in Flexible Porous Covalent Organic Framework Membranes

Poor mechanical stability of the polymer electrolyte membranes remains one of the bottlenecks towards improving the performance of the proton exchange membrane (PEM) fuel cells. The present work proposes a unique way to utilize crystalline covalent organic frameworks (COFs) as a self‐standing, highly flexible membrane to further boost the mechanical stability of the material without compromising its innate structural characteristics. The as‐synthesized p‐toluene sulfonic acid loaded COF membranes (COFMs) show the highest proton conductivity (as high as 7.8×10⁻² S cm⁻¹) amongst all crystalline porous organic polymeric materials reported to date, and were tested under real PEM operating conditions to ascertain their practical utilization as proton exchange membranes. Attainment of 24 mW cm⁻² power density, which is the highest among COFs and MOFs, highlights the possibility of using a COF membrane over the other state‐of‐the‐art crystalline porous polymeric materials reported to date.     

Adsorption Properties of Hydrated Cr3+ Ions on Schiff‐base Covalent Organic Frameworks: A DFT Study

Considering the superior physiochemical property, increasing efforts have been devoted to exploiting the covalent organic frameworks (COFs) materials on the environmental remediation of heavy metal ions. Water pollution caused by Cr³⁺ metal ions is of special concern for scientists and engineers. Notwithstanding all the former efforts made, it is surprising that very little is known about the interaction mechanisms between the hydrated Cr³⁺ metal ions and COF materials. In present context, density functional theory (DFT) method is used to elucidate geometric and electronic properties with the purpose of putting into theoretical perspective the application values and interaction mechanisms for COF materials on Cr³⁺ capture. The results showed that all the five selected Schiff‐base COFs materials displayed good adsorption performance on Cr³⁺ removal while the phenazine‐linked and imine‐COFs possessed the most favorable adsorption capacity due to the optimal chemical units and frameworks. The hydration effect was found to play a two‐side role in the adsorption process and interaction mechanisms, involving coordination, hydrogen bonds, as well as weak non‐covalent interactions, have been illuminated to explain the observed different adsorption behaviors. This study provides a general guidance for the design and selection of efficient COF materials as high‐capacity Cr³⁺ adsorbents.     

Two‐Dimensional Tetrathiafulvalene Covalent Organic Frameworks: Towards Latticed Conductive Organic Salts

The construction of a new class of covalent TTF lattice by integrating TTF units into two‐dimensional covalent organic frameworks (2D COFs) is reported. We explored a general strategy based on the C₂+C₂ topological diagram and applied to the synthesis of microporous and mesoporous TTF COFs. Structural resolutions revealed that both COFs consist of layered lattices with periodic TTF columns and tetragonal open nanochannels. The TTF columns offer predesigned pathways for high‐rate hole transport, predominate the HOMO and LUMO levels of the COFs, and are redox active to form organic salts that exhibit enhanced electric conductivity by several orders of magnitude. On the other hand, the linkers between the TTF units play a vital role in determining the carrier mobility and conductivity through the perturbation of 2D sheet conformation and interlayer distance. These results open a way towards designing a new type of TTF materials with stable and predesignable lattice structures for functional exploration.     

Polycarboxylate‐Templated Coordination Polymers: Role of Templates for Superprotonic Conductivities of up to 10−1 S cm−1

Three coordination polymers (CPs) have been synthesized based on a [Co(bpy)(H₂O)₄]²⁺ chain (bpy=4,4′‐bipyridine) by a template approach. The frameworks are neutralized by different templated polycarboxylate anions (furan di‐carboxylate (fdc) in Co‐fdc, benzene tri‐carboxylate (btc) in Co‐tri and benzene tetra‐carboxylate (btec) in Co‐tetra). These templates with different degrees of protonation and ionic carrier concentration played significant role on crystal packing as well as formation of well‐directed H‐bonded networks which made these CPs perform well in proton conduction (PC). The PC value reaches to 1.49×10^?1 S cm^?1 under 80 °C and 98 % relative humidity (R.H.) for Co‐tri, which is the highest among CPs/MOFs/COFs and is an example of conductivity in the order of 10^?1 S cm^?1. Co‐tri and Co‐tetra are excellent proton conductors at mild temperature (40 °C) and 98 % R.H. (conductivities up to 2.92×10^?2 and 1.38×10^?2 S cm^?1, respectively).     

An Olefin‐Linked Covalent Organic Framework as a Flexible Thin‐Film Electrode for a High‐Performance Micro‐Supercapacitor

Developing effective synthetic strategies as well as enriching functionalities for sp²‐carbon‐linked covalent organic frameworks (COFs) still remains a challenge. Now, taking advantage of a variant of Knoevenagel condensation, a new fully conjugated COF ( g‐C₃₄N₆‐COF ) linked by unsubstituted C=C bonds was synthesized. Integrating 3,5‐dicyano‐2,4,6‐trimethylpyridine and 1,3,5‐triazine units into the molecular framework leads to the enhanced π‐electron communication and electrochemical activity. This COF shows uniform nanofibrous morphology. By assembling it with carbon nanotubes, a flexible thin‐film electrode for a micro‐supercapacitor (MSC) can be easily obtained. The resultant COF‐based MSC shows an areal capacitance of up to 15.2 mF cm^?2, a high energy density of up to 7.3 mWh cm^?3, and remarkable rate capability. These values are among the highest for state‐of‐the‐art MSCs. Moreover, this device exhibits excellent flexibility and integration capability.     

Semiconductor/Covalent‐Organic‐Framework Z‐Scheme Heterojunctions for Artificial Photosynthesis

A strategy to covalently connect crystalline covalent organic frameworks (COFs) with semiconductors to create stable organic–inorganic Z‐scheme heterojunctions for artificial photosynthesis is presented. A series of COF–semiconductor Z‐scheme photocatalysts combining water‐oxidation semiconductors (TiO₂, Bi₂WO₆, and α‐Fe₂O₃) with CO₂ reduction COFs (COF‐316/318) was synthesized and exhibited high photocatalytic CO₂‐to‐CO conversion efficiencies (up to 69.67 μmol g^?1 h^?1), with H₂O as the electron donor in the gas–solid CO₂ reduction, without additional photosensitizers and sacrificial agents. This is the first report of covalently bonded COF/inorganic‐semiconductor systems utilizing the Z‐scheme applied for artificial photosynthesis. Experiments and calculations confirmed efficient semiconductor‐to‐COF electron transfer by covalent coupling, resulting in electron accumulation in the cyano/pyridine moieties of the COF for CO₂ reduction and holes in the semiconductor for H₂O oxidation, thus mimicking natural photosynthesis.     

Designed Synthesis of a 2D Porphyrin‐Based sp2 Carbon‐Conjugated Covalent Organic Framework for Heterogeneous Photocatalysis

The construction of stable covalent organic frameworks (COFs) for various applications is highly desirable. Herein, we report the synthesis of a novel two‐dimensional (2D) porphyrin‐based sp² carbon‐conjugated COF (Por‐sp²c‐COF), which adopts an eclipsed AA stacking structure with a Brunauer—Emmett—Teller surface area of 689 m² g^?1. Owing to the C=C linkages, Por‐sp²c‐COF shows a high chemical stability under various conditions, even under harsh conditions such as 9 m HCl and 9 m NaOH solutions. Interestingly, Por‐sp²c‐COF can be used as a metal‐free heterogeneous photocatalyst for the visible‐light‐induced aerobic oxidation of amines to imines. More importantly, in comparison to imine‐linked Por‐COF, the inherent structure of Por‐sp²c‐COF equips it with several advantages as a photocatalyst, including reusability and high photocatalytic performance. This clearly demonstrates that sp² carbon‐linked 2D COFs can provide an interesting platform for heterogeneous photocatalysis.     

Two‐Dimensional Covalent Organic Frameworks for Carbon Dioxide Capture through Channel‐Wall Functionalization

Ordered open channels found in two‐dimensional covalent organic frameworks (2D COFs) could enable them to adsorb carbon dioxide. However, the frameworks’ dense layer architecture results in low porosity that has thus far restricted their potential for carbon dioxide adsorption. Here we report a strategy for converting a conventional 2D COF into an outstanding platform for carbon dioxide capture through channel‐wall functionalization. The dense layer structure enables the dense integration of functional groups on the channel walls, creating a new version of COFs with high capacity, reusability, selectivity, and separation productivity for flue gas. These results suggest that channel‐wall functional engineering could be a facile and powerful strategy to develop 2D COFs for high‐performance gas storage and separation.     

2D sp2 Carbon‐Conjugated Porphyrin Covalent Organic Framework for Cooperative Photocatalysis with TEMPO

2D covalent organic frameworks (COFs) are receiving ongoing attention in semiconductor photocatalysis. Herein, we present a photocatalytic selective chemical transformation by combining sp² carbon‐conjugated porphyrin‐based covalent organic framework (Por‐sp²c‐COF) photocatalysis with TEMPO catalysis illuminated by 623 nm red light‐emitting diodes (LEDs). Highly selective conversion of amines into imines was swiftly afforded in minutes. Specifically, the π‐conjugation of porphyrin linker leads to extensive absorption of red light; the sp² ?C=C? double bonds linkage ensures the stability of Por‐sp²c‐COF under high concentrations of amine. Most importantly, we found that crystalline framework of Por‐sp²c‐COF is pivotal for cooperative photocatalysis with (2,2,6,6‐tetramethylpiperidin‐1‐yl)oxyl (TEMPO). This work foreshadows that the outstanding hallmarks of COFs, particularly crystallinity, could be exploited to address energy and environmental challenges by cooperative photocatalysis.     

Postsynthetic Functionalization of Three‐Dimensional Covalent Organic Frameworks for Selective Extraction of Lanthanide Ions

Chemical functionalization of covalent organic frameworks (COFs) is critical for tuning their properties and broadening their potential applications. However, the introduction of functional groups, especially to three‐dimensional (3D) COFs, still remains largely unexplored. Reported here is a general strategy for generating a 3D carboxy‐functionalized COF through postsynthetic modification of a hydroxy‐functionalized COF, and for the first time exploration of the 3D carboxy‐functionalized COF in the selective extraction of lanthanide ions. The obtained COF shows high crystallinity, good chemical stability, and large specific surface area. Furthermore, the carboxy‐functionalized COF displays high metal loading capacities together with excellent adsorption selectivity for Nd³⁺ over Sr²⁺ and Fe³⁺ as confirmed by the Langmuir adsorption isotherms and ideal adsorbed solution theory (IAST) calculations. This study not only provides a strategy for versatile functionalization of 3D COFs, but also opens a way to their use in environmentally related applications.     

Post-synthetic Modification of Covalent Organic Frameworks through in situ Polymerization of Aniline for Enhanced Capacitive Energy Storage

Covalent organic frameworks (COFs) having layered architecture with open nanochannels and high specific surface area are promising candidates for energy storage. However, the low electrical conductivity of two-dimensional COFs often limits their scope in energy storage applications. The conductivity of COFs can be enhanced through post-synthetic modification with conducting polymers. Herein, we developed polyaniline (PANI) modified triazine-based COFs via in situ polymerization of aniline within the porous frameworks. The composite materials showed high conductivity of 1.4–1.9×10⁻² S cm⁻¹ at room temperature with a 20-fold enhancement of the specific capacitance than the pristine frameworks. The fabricated supercapacitor exhibited a high energy density of 24.4 W h kg⁻¹ and a power density of 200 W kg⁻¹ at 0.5 A g⁻¹ current density. Moreover, the device fabricated using the conducting polymer-triazine COF composite could light up a green light-emitting diode for 1 min after being charged for 10 s.