New Efficient Synthesis of Methyl Trans-2-Aryl (or Hetaryl)-1-Benzamidocyclopropancarboxylates

Methyl trans-2-aryl(or hetaryl)-1-benzamidocyclopropancarboxylates can be easily obtained by thermal decomposition of trans-4-aryl(or hetaryl)-3-benzamido-3-carbomethoxy-Δ¹-pyrazolines synthesized by 1,3-dipolar cycloaddition of diazomethane with methyl E-3-aryl(or hetaryl)-2-benzamido-2-propenoates.     

Synthesis of all of the possible stereoisomers of 4-benzamido-3-hydroxy-2-(δ-carbomethoxybutyl)thiophan

The stereospecific synthesis of the four possible isomers of 4-benzamido-3-hydroxy-2-(-carbomethoxybutyl)thiophan (III–VI) was accomplished from 4-benzamido-3-oxo-2-(-carbomethoxybutylidene)thiophan (I) using the stereospecificity of the reduction of the oxo group of I, the stereospecificity of the reduction of the exocyclic double bond of 4-benzamido-3-hydroxy-2-(-carbomethoxybutylidene)thiophan (II), and inversion of the hydroxyl group of III and IV. The configurations of the stereoisomers obtained were established by PMR spectroscopy.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 897–901, July, 1972.     

Thiazoles and thiadiazines. The condensation of ethyl 4-chloroacetoacetate with thiosemicarbazide

By varying the acidity, solvent polarity, and temperature when thiosemicarbazide reacted with ethyl 4-chloroacetoacetate, ethyl 2-amino-6H-1,3,4-thiadiazine-5-acetate hydrochloride, ethyl 2-hydrazinothiazole-4-acetate, and ethyl 2-imino-3-aminothiazoline-4-acetate hydrochloride were prepared selectively. Double bond migration occurred after neutralizing the thiadiazine and thiazoline hydrochlorides to form the α,β-unsaturated esters: 2-amino-5-carbethoxymethylidene-4,5-dihydro-6H-1,3,4-thiadiazine and 2-imino-3-amino-4-carbethoxymethylidenethiazolidine. Pmr studies revealed that an equilibrium existed in solution between the imine and enamine tautomers of the thiadiazine free base. In the enamine structure, a 6-membered hydrogen bonded ring system promotes stability. The thiadiazine contracted in acidic aqueous acetone to ethyl 2-isopropylidenehydrazonothiazole-4-acetate. Monobenzoylation at the primary amine of the thiadiazine yielded ethyl 2-benzamido-6H-1,3,4-thiadiazine-5-acetate without disruption of the hydrogen bonded ring, but benzoylating the imino functionality of the thiazolidine caused deconjugation of the α,β-unsaturated ester by double bond migration back into the ring, and ethyl 2-benzimido-3-aminothiazoline-4-acetate was produced, dehydration yielded ethyl 2-phenylthiazolo[3,2-b]-s-triazole-5-acetate. This compound was also obtained by reacting 3-phenyl-1,2,4-triazole-5-thiol with ethyl 4-chloroacetoacetate, while the monobenzoylated derivative of the hydrazinothiazole, ethyl 2-(2-benzoylhydrazino)thiazole-4-acetate underwent a dehydrative cyclization to ethyl 3-phenyl-thiazolo [2,3-c]-s-triazole-5-acetate. In chloroform solvent, the second site of benzoylation on the thiadiazine was ring nitrogen 3 while in ethanol or acetonitrile-pyridine ring nitrogen 4 was benzoylated instead. Benzoylation at ring nitrogen 3 resulted in deconjugation of the α,β-unsaturated ester moiety and formed the endocyclic imine, ethyl 2-benzimido-3-benzoyl-2,3-dihydro-6H-1,3,4-thiadiazine-5-acetate. However, deconjugation of the unsaturated ester did not occur after benzoylation at ring nitrogen 4; the product was trans-2-benzamido-4-benzoyl-5-carbethoxymethylidene-4,5-dihydro-6H-1,3,4-thiadiazine. The hydrogen bonded oximes, syn-2-amino-5-ethyloxalyl-6H-1,3,4-thiadiazine oxime, 3,3-dimethyl-5-ethyloxalyl-2H-1,2,4-triazolo[3,4-b]thiazole oxime, and 2-(2-benzoylhydrazino)-4-ethyloxalylthiazole oxime were synthesized by nitrosation. 2-Amino-5-ethyloxalyl-6H-1,3,4-thiadiazine oxime benzoate, 2-benzamido-5-ethyloxalyl-6H-1,3,4-thiadiazine oxime dibenzoate, and the tribenzoylated derivatives, 2-benzimido-3-benzoyl-5-ethyloxalyl-2,3-dihydro-6H-1,3,4-thiadiazine oxime benzoate and 2-benzamido-4-benzoyl-5-ethyl-oxalyl-4H-1,3,4-thiadiazine oxime benzoate, of the thiadiazine oxime werè prepared. The oxime benzoylated first, the primary amine second, and the number 3 and 4 ring nitrogens last.     

Unexpected cleavage of the N-N bond in the reactions of 3-pyrazolidinone-1-azomethine imines with HCN

Treatment of (1Z,4R^∗,5R^∗)-1-arylmethylidene-4-benzamido-5-phenylpyrazolidin-3-one 1-azomethine imines 4a-d with potassium cyanide in the presence of acetic acid resulted in addition of HCN to the exocyclic CN double bond followed by β-eliminative N-N single bond cleavage (ring opening) to give the N-[(1R^∗,2R^∗)-3-amino-2-benzamido-3-oxo-1-phenylpropyl]benzimidoyl cyanides 6a-d in 28-85% yields. Reaction of dipole 4e with HCN furnished stable intermediate, (1′S^∗,4R^∗,5R^∗)-4-benzamido-1-[cyano(mesityl)methyl]-5-phenylpyrazolidin-3-one (5e), in 76% yield. The structure of compound 6c was determined by X-ray diffraction.     

The reaction of 4-amino-2-oxazolines with isocyanates and isothiocyanates. Synthesis and X-ray structures of polysubstituted 2-imidazolidinones, 1,3-oxazolidines and 1,3-thiazolidines

Reactions of 4-alkylamino-2-phenyl-2-oxazolines 1 with isocyanates and isothiocyanates provide unprecedented efficient and regioselective heterocycle-heterocycle transformations. Compounds 1 reacted rapidly with tosyl isocyanate yielding directly 3-alkyl-4-benzamido-1-tosyl-2-imidazolidinones 4 in almost quantitative yields. The corresponding ureido intermediates 2 were not isolable species. However, the reactions with non-sulfonylated isocyanates or isothiocyanates were slower, leading to the expected ureido and thioureido derivatives 5, which were easily and efficiently transformed to either polysubstituted 2-imino-1,3-oxazolidine or 2-imino-1,3-thiazolidine hydrochlorides 7, respectively, by treatment with hydrochloric acid. The possible reasons for this disparity in chemical behaviour are discussed. X-ray crystallographic structures for 4-benzamido-3-methyl-1-tosyl-2-imidazolidinone 4b, 4-[1-isopropyl-3-(4-nitrophenyl)ureido]-2-phenyl-2-oxazoline 5e, (Z)-3-benzyl-4-benzamido-2-phenylimino-1,3-oxazolidine hydrochloride 7a and (Z)-3-benzyl-4-benzamido-2-phenylimino-1,3-thiazolidine hydrochloride 7b have been determined.     

Synthesis of 5-aryl-3-carbazoyl-1,3,4-oxadiazol-2(3H)-one. Derivatives and their ring transformation into 5-benzamido-1,2,4-triazolidine-3,5-dione derivatives

Some 5-aryl-3-carbazoyl-1,3,4-oxadiazol-2(3H)-one derivatives 6 and 9 have been synthesized in two ways. The expected thermal ring transformation into 2,5-disubstituted 1,3,4-oxadiazoles did not occur but, by acid hydrolysis of 5-aryl-3-[3-benzylidene-2-methyl(or phenyl)carbazoyl]-1,3,4-oxadiazol-2(3H)-ones 6 , a new ring transformation took place and the corresponding 4-benzamido-1-methyl(or phenyl)-1,2,4-triazolidine-3,5-dione derivatives 11 were formed. The 4-amino-1-phenyl-1,2,4-triazolidine-3,5-dione ( 19 ) has been prepared and its structure was confirmed by some reactions.     

Synthesis of certain exocyclic thiazole nucleosides related to tiazofurin. Formation of a unique acycloaminonucleoside

Several thiazole nucleosides structurally related to tiazofurin (1) and ARPP (2) were prepared, in order to determine whether these nucleosides had enhanced antitumor/antiviral activities. Ring closure of 1-(2,3,5-tri-O-benzoyl-β-D-ribofuranosyl)thiourea (4) with ethyl bromopyruvate (5a) gave ethyl 2-(2,3,5-tri-O-benzoyl-β-D-ribofuranosylamino)thiazole-4-carboxylate (6a) . Treatment of 6a with sodium methoxide furnished methyl 2-(β-D-ribopyranosylamino)thiazole-4-carboxylate (9) . Ammonolysis of the corresponding methyl ester of 6a gave a unique acycloaminonucleoside 2-[(1R, 2R, 3R, 4R)(1-benzamido-2,3,4,5-tetrahydroxypentane)amino]-thiazole-4-carboxamide (7a) . Direct glycosylation of the sodium salt of ethyl 2-mercaptothiazole-4-carboxylate (12) with 2,3,5-tri-O-benzoyl-D-ribofuranosyl bromide (11) gave the protected nucleoside 10 , which on ammonolysis provided 2-(β-D-ribofuranosylthio)thiazole-4-carboxamide (3b) . Similar glycosylation of 12 with 2-deoxy-3,5-di-O-p-toluoyl-α-D-erythro-pentofuranosyl chloride (13) , followed by ammonolysis gave 2-(2-deoxy-β-D-ribofuranosylthio)thiazole-4-carboxamide (3c) . The structural assignments of 3b, 7a , and 9 were made by single-crystal X-ray analysis and their hydrogen bonding characteristics have been studied. These compounds are devoid of any significant antiviral/antitumor activity in vitro.     

Synthesis,configuration, and conformation of 3-acyl derivatives of 3a,4,6,6a-tetrahydrothieno[3,4-d][1,2,3]oxathiazoline 2-oxide

3-Benzoyl-3a,4,6,6a-tetrahydrothieno[3,4-d][1,2,3]oxathiazoline 2-oxide is formed as a result of intramolecular cyclization of cis-4-benzamido-3-chlorosulfitothiophan. Only one sulfur atom — that of the sulfoxide group — is removed from the cyclization product and the analogous 3-methoxycarbonyl-3a,4,6,6a-tetrahydrothieno[3,4-d][1,2,3]oxathiazoline 2-oxide by the action of Raney nickel; the products in this case are, respectively, cis-4-benzamido-3-hydroxythiophan and 3a,4,6,6a-tetrahydrothieno]3,4-d]oxazolidone. The three-dimensional structure of 3-acyl-3a,4,4,6a-tetrahydrothieno[3,4-d][1,2,3]oxathiazoline 2-oxide was determined by ¹H and ¹³C NMR spectroscopy. A difference between the conformational state of 3-substituted 3a,4,6,6a-tetrahydrothieno[3,4-d][1,2,3]oxathiazoline 2-oxides and 3-substituted 3a,4,6,6a-tetrahydrothieno[3,4-d]oxazolidones was established.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 191–197, February, 1977.     

Transformations of 2-(3-Hydroxy-3-methyl-1-butynyl)adamantan-2-ol >Catalyzed by Acids

Reaction of 2-(3-hydroxy-3-methyl-1-butynyl)adamantan-2-ol with acetonitrile under Ritter reaction conditions is accompanied by isomerization and partial hydration where the water addition to the triple bond occurs nonselectively. As a result of reaction carried out in the presence of 8 equiv of sulfuric acid a mixture was obtained of N ²-[4-(1-acetylamino-2-adamantyl)-2-methyl-3-butyn-2-yl]acetamide, N ³-[1-(1-acetylamino-2-adamantyl)-3-methyl-2-oxo-3-butyl]-acetamide, and N ³-[1-(1-acetylamino-2-adamantyl)-3-methyl-1-oxo-3-butyl]acetamide in ~10:3:2 ratio. In the presence of 2 equiv of the acid the mixture obtained consisted of N ²-[4-(1-acetylamino-2-adamantyl)-2-methyl-3-butyn-2-yl]acetamide, N ³-[1-(1-acetylamino-2-adamantyl)-3-methyl-2-oxo-3-butyl]acetamide, and 1-(1-acetylamino-2-adamantyl)-3-methyl-2-buten-1-one in the same ratio. In Rupe reaction conditions we obtained instead of the expected ,-unsaturated ketones a mixture of 1-(1-hydroxy-2-adamantyl)-3-hydroxy-3-methylbutan-1-one and 1-(1-hydroxy-2-adamantyl)-3-hydroxy-3-methylbutan-2-one in a 5:3 ratio.     

SYNTHESIS AND CATIONIC RING-OPENING POLYMERIZATION OF 1, 4-ANHYDRO-2, 3-DI-O-(P-AZIDOBENZYL)-α-D-RIBOPYRANOSE

New highly stereoregular 2, 3 -di- O-(p-azidobenzyl )-(1 →5 ) - α-D -ribofuranan was synthesized byselective ring-opening polymerization of 1, 4-anhydro-2, 3 - di-O -(p-azidobenzyl )-α-D -ribopyranose(ADABR) using phosphorus pentafluoride or tin tetrachloride as catalyst at low temperature indichloromethane. The monomer was obtained by the reaction of p - bromomethyl -phenyleneazide with 1, 4 -anhydro-α-D-ribose in DMF. The structure of poly(ADANR) was identified by specific rotation and ~(13)C-NMR spectroscopy. Acid chloride-AgCl_4 complex catalyst such as CH_2=C(CH_3)C~+OClO_4~- used in thepolymerization resulted in polymers with mixed structures, i.e. (1→5)-α-D-ribofuranosidic and (1→4)-β-D-ribopyranosidic units. However, with C_6H_5C~+OClO_4~- as catalyst, pure (1→5)-α-D-ribofuranan was obtained.The effects of catalyst, polymerization temperature and time on polymer stereoregularity were examined, andthe mechanism of the ring-opening polymerization was discussed.     

Synthesis and Conformational Analysis of 2′-Deoxy-2′-(3-methoxybenzamido)adenosine,a rational-designed inhibitor of trypanosomal glyceraldehyde phosphate dehydrogenase (GAPDH)

A series of 2′-benzamido-2′-deoxyadenosine analogues were synthesized in an effort to find new lead structures for the treatment of sleeping sickness. The 2′-deoxy-2′-(3-methoxybenzamido)adenosine ( 1h ) was proved to be a selective inhibitor of the parasite glyceraldehyde 3-phosphate dehydrogenase which confirms the modeling studies. The solution-state conformation of 2′-(thiophene-2-carboxamido) analogue 1d demonstrates a 2′-endo conformation, an orientation of the thiophene ring under the ribose moiety, and the base part occupying a ‘syn’/‘anti’ equilibrium.     

新型席夫碱配体及其Mn3+、Fe3+、Ni2+、Cu2+配合物的合成与表征

0引言手性环氧化物是合成许多天然产物、光学活性材料、光学活性药物等的重要中间体[1]。上世纪60年代以来,手性过渡金属配合物作为烯烃不对称环氧化的催化剂越来越受到人们的重视[2]。研究表明,某些席夫碱金属配合物具有仿酶催化活性,在仿酶催化剂的合成及应用方面占有重要地位[3]。目前,人们将水杨醛衍生物与光学活性胺的席夫碱金属配合物用于不对称环氧化、不对称环丙烷化等反应,具有很高的对映体选择性[4]。同时发现配体的电子效应直接影响配合物的催化活性和对映体选择性。为进一步研究配体的电子性能对配合物催化性能的影响,我们设计…     

Investigation of the reactions of fluorine containing 3-hydrazino-5H-1, 2, 4-triazino[5, 6-b]indoles with ethyl acetoacetate. Synthesis of some novel tetracyclic ring systems

Novel tetracyclic ring systems viz. 3-methyl-1-oxo-12H-1, 2, 4-triazepino[3′,4′:3, 4][1, 2, 4]triazino[5, 6-b]indole ( 4a ) and 3-methyl-5-oxo-12H-1, 2, 4-triazepino[4′,3′:2, 3][1, 2, 4]triazino[5, 6-b]indole ( 5a ), having angular and linear structures respectively, were synthesized by the cyclization of 3-oxobutanoic acid [5H-1, 2, 4-triazino-[5, 6-b]indole-3-yl]hydrazone ( 3a ). However, cyclization of 3b (R = CH_a, R¹ = R² = H) afforded the angular product 4b exclusively. Moreover, cyclization of 3c (R = R³ = H, R¹ = F) yielded 7-fluoro-1-0xo-10H-1, 3-imidazo[2′,3′:3, 4][1, 2, 4]triazino[5, 6-b]indole ( 6c ) and 7-fluoro-3-oxo-10H-1, 3-imidazo[3′,2′:2, 3][1, 2, 4]triazino-[5, 6-b]indole ( 7c ) instead of the expected triazepinone derivatives. Compound 3d (R = R¹ = H, R² = CF₃) also gave an imidazole derivative but only one angular product was obtained. In all these reactions, formation of the angular product involving cyclization at N-4 is favoured. Characterization of these products have been done by elemental analyses, ir, pmr, ¹⁹F nmr and mass spectral studies.     

Mono- and dinuclear Zn(II) complexes of Schiff-base ligands: syntheses,characterization and studies of photoluminescence

Six Schiff-bases HL¹-HL⁴, L⁵ and L⁶ [HL¹ = 2,6-bis[1-(2-aminoethyl)pyrolidine-iminomethyl]-4-methyl-phenol, HL² = 2,6-bis[1-(2-aminoethyl)piperidine-iminomethyl]-4-methyl-phenol, HL³ = N-{1-(2-aminoethyl)pyrolidine}salicylideneimine, HL⁴ = N-{1-(2-aminoethyl)piperidine}salicylideneimine, L⁵ = 2-benzoyl pyridine-N-{1-(2-aminoethyl)pyrolidine}, L⁶ = 2-benzoylpyridine-N-{1-(2-aminoethyl)piperidine}] have been synthesized and characterized. Zn(II) complexes of those ligands have been prepared by conventional sequential route as well as by template synthesis. The same complexes are obtained from the two routes as evident from routine physicochemical characterizations. All the Schiff-bases exhibit photoluminescence originating from intraligand (π–π*) transitions. Metal mediated fluorescence enhancement is observed on complexation of HL¹-HL⁴ with Zn(II), whereas metal mediated fluorescence quenching occurs in Zn(II) complexes of L⁵ and L⁶.     

Reaction of 1,3,4-oxadiazolones with free L-α-amino acids: A facile synthesis of novel 3,5-disubstituted hydantoins

A series of novel 3,5-disubstituted hydantoins 3a-1 were easily synthesized in one-step from the reaction of 2-phenyl-1,3,4-oxadiazolin-5-ones 1a-h with various free L-α-amino acids 2a-e in m-cresol at 150°. An alternative route leading to the formation of 3-benzamido-5-isopropylhydantoin 3c was also developed to make clear the reaction mechanism.     

Chemistry of sulfonyl isocyanates and sulfonyl isothiocyanates. X. Possible routes to substituted imidazolidinethiones and hexahydropyrimidinethiones

4-Toluenesulfonyl isocyanate (I) reacted with 2-aminoethanol and 3-amino-l-propanol to give 2:1 isocyanate/amino alcohol addition products. 1-Amino-2-propanol and I gave 1:1 and 2:1 adducts while 2-amino-2-methyl-l-propanol afforded only a 1:1 adduct. 4-Toluenesulfonyl isothio-cyanate (III) gave 1:1 adducts with 2-aminoethanol, l-amino-2-propanol and 3-amino-l-propanol, the first two of which were cyclized by concentrated sulfuric acid to 1-(4-toluenesulfonyl)-imidazoline-2-thiones and the third to 1-(4-toluenesulfonyl)hexahydropyrimidine-2-thione. A 1:2 adduct was obtained from III and 2-amino-2-methyl-l-propanol. Amino acids reacted with I and with 4-chlorobenzenesulfonyl isocyanate (II) to give N-(arylsulfonyl)-N¹-(carboxylic acid)-ureas. N-(4-Toluenesulfonyl)-N¹-(acetic acid)-urea (XVI) was converted to the methyl ester (XIX) by concentrated sulfuric acid and methanol and to water-soluble unrecoverable products by sulfuric acid alone. Glycine and III gave N-(4-toluenesulfonyl)-N¹-(acetic acid)-thiourea (XX) which was converted to the methyl ester (XXII) by concentrated sulfuric acid/methanol and to the cyclic 1-(4-toluenesulfonyl)imidazolin-5-one-2-thione (XXI) by sulfuric acid alone.     

Preparation and Structure of (E)-1-(3′-Hydroxy-2-Furanyl)-3-(3″-Hydroxy-4″-Methoxyphenyl)-2-Propen-1-One

Abstract

A facile procedure is presented for the synthesis of (E)-1-(3′-hydroxy-2′-furanyl)-3-(3″-hydroxy-4″-methoxyphenyl)-2- propen-1-one (6). Galactosylisomaltol (1) was condensed with isovanillin (2) under strong alkaline conditions at 25 [ddot]C to form (E)-1-(3′-O-β-D-galactopyranosyloxy-2′-furanyl)-3-(3″- hydroxy-4″-methoxyphenyl)-2-propen-1-one (4). (E)-1-(3′-hydroxy-2′-furanyl)-3-(3″-hydroxy-4″-methoxyphenyl)-2-propen-1-one (6) was obtained by acid hydrolysis of 4 in a 53.9% yield. This hetero-cyclic 2-propen-1-one was characterized on the basis of spectral data (IR and ¹H NMR), physicochemical properties, and conversion to a mono-O-acetyl derivative.     

Reactions of 5-oxo-1-phenylpyrrolidine-3-carbohydrazides with 1,4-naphthoquinone derivatives and the properties of the obtained products

N′-(4-Oxo-1,4-dihydronaphthalen-1-ylidene)-1-phenyl-5-oxopyrrolidine-3-carbohydrazides and N′-(3-methyl-4-oxo-1,4-dihydronaphthalen-1-ylidene)-1-phenyl-5-oxopyrrolidine-3-carbohydrazides were synthesized by reactions of 5-oxo-1-phenylpyrrolidine-3-carbohydrazides with 1,4-naphthoquinone or 2-methyl-1,4-naphthoquinone. The alkylated analogues of the above products were obtained using ethyl iodide. The interaction of 5-oxo-1-phenylpyrrolidine-3-carbohydrazides with 2,3-dichloro-1,4-naphthoquinone was followed by formation of N′-(3-chloro-1,4-dioxo-1,4-dihydronaphthalen-2-yl)-1-phenyl-5-oxopyrrolidine-3-carbohydrazides. All these compounds were characterized using ¹H, ¹³C NMR, IR and mass spectra. Some of the new compounds were tested for the antimicrobial and antifungal activity.     

Synthesis and spectral properties of 2-methylthio-3H-4-(para-substituted-phenyl)-7-[(o-, and p-substituted)-phenylthio]-1,5-benzodiazepines

A series of twelve new 2-methylthio-3H-4-(p-substituted phenyl)-7-[(o-, and p-substituted)phenylthio]-1,5-benzodiazepines, which have potentially useful pharmacological properties, has been synthesized by condensing the 3,3-dimercapto-1-(para-substituted-phenyl)-2-propen-1-one with 3,4-diamino phenyl-R-phenylthio ethers, and subsequently the 1H-1,5-benzodiazepine-2-thiones obtained were treated with sodium hydride and methyl iodide. The structure of all products was corroborated by ir, ¹H-nmr, ¹³C-nmr and ms.     

Establishment of the configuration of 4-benzamido-3-oxo-2-(α-hydroxyamino-δ-carbomethoxybutyl)-thiophane

Proton magnetic resonance spectroscopy was used to establish that the addition of hydroxylamine to the exocyclic double bond of 4-benzamido-3-oxo-2-(-carbomethoxybutylidene)-thiophane occurs stereospecifically; the compound formed has the trans configuration with respect to the substituents in the 2 and 4 positions.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 12, pp. 1600–1601, December, 1972.