Affinity capillary electrophoresis of DNA for detection of single-nucleotide polymorphisms and point mutations. Comprehensive study for optimization of the weak affinity

A single-stranded DNA and its point mutant can be separated with affinity capillary electrophoresis (ACE) in which an appropriate ligand DNA is used as a pseudo-stationary affinity phase. In this paper, we systematically examine the effects of ligand sequence, capillary temperature, and cation concentration on the ACE separation quality, which is quantitatively evaluated in terms of resolution and peak height. For fine tuning of the affinity, control of MgCl(2) concentration and insertion of a spacer sequence into the ligand DNA are more effective than control of the capillary temperature. For design of the ligand DNA, a simple strategy is proposed, based on the prediction of melting temperature. This strategy was tested with eleven different sample sequences. All of them were separated under the same conditions (250 microM MgCl(2) and 25 degrees C), and nine cases of them had satisfactory separation qualities.     

Oligodeoxynucleotide-modified capillary for electrophoretic separation of single-stranded DNAs with a single-base difference.

We describe here a method of affinity capillary electrophoresis in which oligodeoxynucleotide (ODN) was immobilized onto the inner surface of the capillary. The immobilized ODN functioned successfully as an affinity ligand for sequence-based DNA separation. Six- or 12-mer ODN with a sequence complementary to one of the c-K-ras gene was used as an immobilized ligand. When the 12-mer ODN was used, the detection peak for the complementary ODN disappeared selectively, while the single-base mutant was detected as usual. In contrast, when the 6-mer ODN was used as the affinity ligand with a mixture of the complementary ODN and its single-base mutant, it was possible to detect both as completely separate peaks. That is, the separation mode was dependent on the base number of the immobilized ODN used as an affinity ligand.     

Detection of single-base mutation by affinity capillary electrophoresis using a DNA-polyacrylamide conjugate

We have developed an affinity capillary electrophoresis (ACE) method for detection of gene point mutations using a DNA-polyacrylamide conjugate as a pseudostationary affinity phase. In this study, the target DNA was prepared by mixing two PCR products: the wild type of K-ras gene and its codon 12 point mutant. The ligand DNA was designed to be complementary to codons 11 and 12 of the wild type. The target DNA was denatured by the addition of formamide and by heating at 95 degrees C for 5 min, and then electrophoretically separated by difference in affinity to the pseudoimmobilized ligand DNA. The method successfully separated a mixture of the wild-type DNA and each of six codon 12 point mutants by the same ligand DNA. The limit of mutation detection was determined by mixing the wild-type DNA with decreasing concentrations of the mutant DNA. The lowest level of detection was 10% mutant DNA in a background of the wild type. The practicability of this method has been confirmed using a colorectal carcinoma cell line. This study is the first demonstration of detection of gene point mutation in polymerase chain reaction (PCR) products using ACE, and opens up a new possibility of CE-based gene diagnosis.     

Capillary electrophoresis using immobilized whole cells with overexpressed endothelin receptor for specific ligand screening

A new capillary electrophoresis method using immobilized cells as the stationary phase has been developed. The power of this method is demonstrated by the separation and identification of endothelin antagonists on a capillary column coated by the transfected Chinese hamster ovary (CHO) cells with overexpressing endothelin receptors. The screening results are validated by functional assays suppressing the increase of intracellular calcium concentration induced by endothelin-1. Instead of making efforts in isolating protein receptors, the easily prepared whole-cell capillary column provides a superior tool on the basis of ligand/receptor affinity for a rapid screening of potent drug candidates from compound libraries.     

Capillary electrophoretic approach to screen for enzyme inhibitors in natural extracts

This paper demonstrates development of electrophoretically mediated micro analysis (EMMA), for screening protein tyrosine phosphatase (PTP) inhibitors in natural extracts. It is demonstrated that capillary electrophoresis (CE) separation of the substrate and the product allows for using the assay in an on-column format to monitor the reaction without typically used fluorogenic substrates. Michaelis-Menten kinetics parameters calculated based on the EMMA results (Km = 1.2-1.5 microM) were in a good agreement (Km = 1.0-1.5 microM) obtained using an off-line CE functional assay (CE FA). EMMA of PTP titrated with different concentrations of ligand demonstrated the peak-shift phenomenon normally seen in affinity capillary electrophoresis. This feature of EMMA gives an indication of the binding affinity of the ligand in addition to its functional activity, providing another dimension in characterization of the protein-inhibitor interaction. It was demonstrated that simultaneous screening of the primary PTP target and a secondary, counter target (PTP-C) using the EMMA format can be used to prioritize hits based on their specificity.     

Affinity capillary electrophoretic DNA separation using PEG-oligodeoxyribonucleotide block copolymers: relationship between peak resolution and affinity strength

Capillary electrophoretic separation of chemically synthesized ssDNA and a single-base-substituted one (normal and mutant ssDNA, respectively) was demonstrated using a PEG-oligodeoxyribonucleotide block copolymer (PEG-b-ODN) as an affinity ligand. When the base sequence of PEG-b-ODN was designed to be complementary to part of normal ssDNA including the base-substituted site, the electrophoretic mobility of normal ssDNA significantly decreased whereas that of mutant ssDNA slightly changed. Resolution of the separation strongly depended on the ODN length of the copolymer, the capillary temperature, and the Mg2+ concentration in the running buffer, indicating that the retardation of migration of normal ssDNA was induced by the reversible hybridization with PEG-b-ODN. It was found that the dissociation constant (K(d)) of the duplex between normal ssDNA and the affinity probe ODN should be smaller than 10(-6) M to achieve the good peak separation. In addition, we calculated the mobility of the complex (mu(C)) between normal ssDNA and PEG-b-ODN using a two-state model. The base sequence of affinity probe ODN appropriate to achieve the sufficient resolution will be predicted on the basis of the mu(C) and K(d )values.     

Multiple ligand detection and affinity measurement by ultrafiltration and mass spectrometry analysis applied to fragment mixture screening

Binding affinity of a small molecule drug candidate to a therapeutically relevant biomolecular target is regarded the first determinant of the candidate's efficacy. Although the ultrafiltration-LC/MS (UF-LC/MS) assay enables efficient ligand discovery for a specific target from a mixed pool of compounds, most previous analysis allowed for relative affinity ranking of different ligands. Moreover, the reliability of affinity measurement for multiple ligands with UF-LC/MS has hardly been strictly evaluated. In this study, we examined the accuracy of K_d determination through UF-LC/MS by comparison with classical ITC measurement. A single-point K_d calculation method was found to be suitable for affinity measurement of multiple ligands bound to the same target when binding competition is minimized. A second workflow based on analysis of the unbound fraction of compounds was then developed, which simplified sample preparation as well as warranted reliable ligand discovery. The new workflow implemented in a fragment mixture screen afforded rapid and sensitive detection of low-affinity ligands selectively bound to the RNA polymerase NS5B of hepatitis C virus. More importantly, ligand identification and affinity measurement for mixture-based fragment screens by UF-LC/MS were in good accordance with single ligand evaluation by conventional SPR analysis. This new approach is expected to become a valuable addition to the arsenal of high-throughput screening techniques for fragment-based drug discovery.     

The separation of oligodeoxynucleotides having a single-base difference by affinity capillary electrophoresis using oligodeoxynucleotide- polyacrylamide conjugate

We have developed an affinity capillary electrophoresis for gene mutation assay. We show a method for separating a mixture of oligodeoxynucleotides having single-base difference using oligodeoxynucleotide-polyacrylamide conjugate. Because the conjugate behaved similarly to nonionic polyacrylamide in terms of migration rate, it can be used as a pseudoimmobilized affinity ligand in a polyacrylamide-coated capillary. Oligodeoxynucleotide having an oncogene sequence and a version with one base substituted were completely separated by this method. The magnesium-ion concentration was found to be a key factor in achieving efficient separation of oligodeoxynucleotides with the same chain length.     

Chiral separation of sympathomimetics by ligand exchange capillary electrophoresis.

A rapid and simple approach to the chiral separation of sympathomimetic drugs with amino alcohol structure by ligand exchange capillary electrophoresis is described. An N-(2-hydroxyoctyl)-L-4-hydroxyproline/copper(II) complex is used as chiral selector. Thirteen sympathomimetics were resolved, nine with baseline resolution. The influence of pH and composition of the electrolyte on resolution was investigated. The optimal pH for complexation of these amino alcohols was found to be 12.     

毛细管电泳法高效筛选8-氧代鸟嘌呤DNA糖基化酶的核酸适配体

8-氧代鸟嘌呤DNA糖基化酶(OGG1)是人体中重要的功能蛋白,在修复DNA氧化性损伤过程中起关键作用。氧化应激等引起的氧化损伤易导致炎症反应的发生,对OGG1的抑制可以一定程度上起到缓解作用;对癌细胞OGG1的抑制有望作为癌症治疗的新方法。目前的研究多集中于小分子对OGG1功能的影响和调控,而OGG1的适配体筛选尚未见报道。作为功能配体,适配体具有合成简单、高亲和力及高特异性等优点。该文筛选了OGG1的核酸适配体,结合毛细管电泳高效快速的优点建立了两种基于毛细管电泳-指数富集进化(CE-SELEX)技术的筛选方法:同步竞争法和多轮筛选法。同步竞争法利用单链结合蛋白(SSB)与核酸库中单链核酸的强结合能力,与目标蛋白OGG1组成竞争体系,并通过增加SSB浓度来增加竞争筛选压力,以去除与OGG1弱结合的核酸序列,一步筛选即可获得与OGG1强结合的核酸序列。多轮筛选法在相同孵育条件和电泳条件下,经3轮筛选获得OGG1的核酸适配体。比较两种筛选方法的筛选结果,筛选结果中频次最高的3条候选核酸适配体序列一致,其解离常数(K_D)值在1.71~2.64 μmol/L之间。分子对接分析结果表明候选适配体1(Apt 1)可能与OGG1中具有修复氧化性损伤功能的活性口袋结合。通过对两种筛选方法的对比,证明同步竞争法更加快速高效,对其他蛋白核酸适配体筛选方法的选择具有一定的指导意义。得到的适配体有望用于OGG1功能调控,以抑制其修复功能。     

A review on recent developments for biomolecule separation at analytical scale using microfluidic devices

Microfluidic devices with their inherent advantages like the ability to handle 10⁻⁹ to 10⁻¹⁸ L volume, multiplexing of microchannels, rapid analysis and on-chip detection are proving to be efficient systems in various fields of life sciences. This review highlights articles published since 2010 that reports the use of microfluidic devices to separate biomolecules (DNA, RNA and proteins) using chromatography principles (size, charge, hydrophobicity and affinity) along with microchip capillary electrophoresis, isotachophoresis etc. A detailed overview of stationary phase materials and the approaches to incorporate them within the microchannels of microchips is provided as well as a brief overview of chemical methods to immobilize ligand(s). Furthermore, we review research articles that deal with microfluidic devices as analytical tools for biomolecule (DNA, RNA and protein) separation.     

Development of reactive thiol-modified monolithic capillaries and in-column surface functionalization by radical addition of a chromatographic ligand for capillary electrochromatography

Reactive thiol-modified capillary columns for capillary electrochromatography (CEC) were developed by transforming the pendent 2,3-epoxypropyl groups of poly(glycidyl methacrylate-co-ethylene dimethacrylate) (poly(GMA-co-EDMA)) monoliths into 3-mercapto-2-hydroxy-propyl residues by a nucleophilic substitution reaction, employing sodium-hydrogen sulfide as nucleophilic reagent. Conditions for this modification reaction were systematically optimized with respect to different parameters, such as reaction temperature, pH-value, reaction time, type and concentration of organic modifier, and concentration of the sodium-hydrogen sulfide solution. The amount of thiol groups that was generated on the monolith surface was determined directly in the capillaries by a disulfide-exchange reaction employing 2,2'-dipyridyl disulfide (DPDS). This reaction in the capillary liberates pyridine-2-thione in equimolar amount to the surface sulfhydryls, which was collected into a vial and determined photometrically at 343 nm by RP-HPLC. About 17% of the total lateral epoxide moieties of the monolithic substrate could be transformed to reactive sulfhydryl groups, which corresponds to about 0.7 mmol g(-1) monolithic polymer, with a column-to-column repeatability of 3.2% R.S.D. The reactive thiol groups can be utilized to attach any chromatographic ligand with appropriate anchor in a second step, e.g. by radical addition, graft polymerization, nucleophilic substitution, disulfide formation or Michael addition reaction. To demonstrate the feasibility of the concept, we chose an anion exchange type chromatographic ligand based on a quinine derivative, O-9-tert-butylcarbamoylquinine (t-BuCQN) which was attached to the monolith in a radical addition reaction, for a further in-column surface functionalisation. About 78% of the sulfhydryl groups were derivatized with t-BuCQN as determined from differential DPDS assays before and after the selector immobilization reaction. The applicability of these surface-functionalised monolithic capillary columns could be shown by an electrochromatographic separation of the enantiomers of N-3,5-dinitrobenzoyl-leucine, which performed fairly well compared to an analogous capillary that was fabricated by an in situ copolymerization approach.     

Fast separation of oligonucleotide and triplet repeat DNA on a microfabricated capillary electrophoresis device and capillary electrophoresis

A laser-induced fluorescence detection system coupled with a highly sensitive silicon-intensified target (SIT) camera is successfully applied to the imaging of a band for DNA fragment labeling by fluorescence dye in a microchannel, and to the visualizing of the separation process on a microfabricated chip. We demonstrated that an only 6 mm separation channel is sufficient for the separation of triplet repeat DNA fragment and DNA molecular marker within only 12 s. The separation using the microfabricated capillary electrophoresis device is confirmed to be at least 18 times faster than the same separation carried out by conventional capillary electrophoresis with 24.5 cm effective length. The use of a short capillary with 8.5 cm effective length is also efficient for fast separation of DNA; however, the microchip technology is even faster than capillary electrophoresis using a short capillary.     

High-throughput screening of holoprotein conformational stability by dynamic ligand exchange-affinity capillary electrophoresis

Dynamic ligand exchange-affinity capillary electrophoresis (DLE-ACE) is introduced as a convenient platform for assessing the conformational stability and relative affinity of a holoprotein to different ligands without off-line sample pretreatment, since ligand exchange and protein unfolding processes are integrated in-capillary during electromigration.     

Synthesis and DNA binding studies of Ni(II), Co(II), Cu(II) and Zn(II) metal complexes of N1,N5-bis[pyridine-2-methylene]-thiocarbohydrazone Schiff-base ligand

The thiocarbohydrazone Schiff-base ligand with a nitrogen and sulphur donor was synthesized through condensation of pyridine-2-carbaldehyde and thiocarbohydrazide. Schiff-base ligands have the ability to conjugate with metal salts. A series of metal complexes with a general formula [MCl2(H2L)]·nH2O (MNi, Co, Cu and Zn) were synthesized by forming complexes of the N1,N5-bis[pyridine-2-methylene]-thiocarbohydrazone (H2L) Schiff-base ligand. These metal complexes and ligand were characterized by using ultraviolet-visible (UV-Vis), Fourier Transform Infrared (FT-IR), 1H and 13C NMR spectroscopy and mass spectroscopy, physicochemical characterization, CHNS and conductivity. The biological activity of the synthesized ligand was investigated by using Escherichia coli DNA as target. The DNA interaction of the synthesized ligand and complexes on E. coli plasmid DNA was investigated in the aqueous medium by UV-Vis spectroscopy and the binding constant (Kb) was calculated. The DNA binding studies showed that the metal complexes had an improved interaction due to trans-geometrical isomers of the complexes than ligand isomers in cis-positions.     

Methods for investigating G-quadruplex DNA/ligand interactions

DNA is considered an important target for drug design and development. Until recently, the focus was on double-stranded (duplex) DNA structures. However, it has now been shown that single stranded DNA can fold into hairpin, triplex, i-motif and G-quadruplex structures. The more interesting G-quadruplex DNA structures comprise four strands of stacked guanine (G)-tetrads formed by the coplanar arrangement of four guanines, held together by Hoogsteen bonds. The DNA sequences with potential to form G-quadruplex structures are found at the chromosomal extremities (i.e. the telomeres) and also at the intra-chromosomal region (i.e. oncogenic promoters) in several important oncogenes. The formation of G-quadruplex structures is considered to have important consequences at the cellular level and such structures have been evoked in the control of expression of certain genes involved in carcinogenesis (c-myc, c-kit, K-ras etc.) as well as in the perturbation of telomeric organization. It has been shown that the formation of quadruplexes inhibits the telomere extension by the telomerase enzyme, which is up-regulated in cancer cells. Therefore, G-quadruplex structures are an important target for drug design and development and there is a huge interest in design and development of small molecules (ligands) to target these structures. A large number of so-called G-quadruplex ligands, displaying varying degrees of affinity and more importantly selectivity (i.e. the ability to interact only with quadruplex-DNA and not duplex-DNA), have been reported. Access to efficient and robust in vitro assays is needed to effectively monitor and quantify the G-quadruplex DNA/ligand interactions. This tutorial review provides an overview of G-quadruplex ligands and biophysical techniques available to monitor such interactions.     

Chiral ligand exchange capillary electrophoresis using borate anion as a central ion

Native DL-pantothenic acid, having a 1,3-diol structure, was chirally resolved by ligand exchange capillary electrophoresis using (S)-3-amino-1,2-propanediol as a chiral selector and the borate anion as a central ion. The optimum conditions for both high resolution and short migration time of DL-pantothenic acid were found to be 200 mM (S)-3-amino-1,2-propanediol and 200 mM borate buffer (pH 9.2) containing 15% methanol with an applied voltage of +25 kV at 20 degrees C, using direct detection at 200 nm. With this system, the resolution (Rs) of racemic pantothenic acid was approximately 1.7. When (S)-1,2-propanediol, (S)-1,2,3-propanetriol, (S)-1,3-butanediol or (S)-1-amino-2-propanol were used as chiral ligand instead of (S)-3-amino-1,2-propanediol, DL-pantothenic acid was not enantioseparated. When borate was replaced with Tris or butylborate, no chiral separation was achieved. Therefore, the ionic interaction between the amino and carboxyl groups of the ternary complex may play an important role in the enantioseparation of DL-pantothenic acid by the proposed CE system.     

Drug screening of pharmaceutical discovery compounds by micro-size exclusion chromatography/mass spectrometry.

Micro-size exclusion chromatography coupled with capillary liquid chromatography (capLC) and mass spectrometry (MS) provides a rapid and simple approach to the preliminary screening of active ligands toward a specific target macromolecule. In this study, the effectiveness of this technique is demonstrated by a number of small molecule ligands with known binding affinities towards the protein target. All ligands were incubated together with a target protein under native conditions. Separation was then achieved by microcentrifugation where the high molecular weight (MW) compounds were selectively passed through the size-exclusion material. The retained low MW compounds were then recovered and analyzed by capLC/MS. The absence of the ligand indicated strong affinity towards the target, while ligand detection indicated inactivity. This assay demonstrated the drugs that were acting as strong inhibitors of Co-PDF from those showing to be comparatively inactive. The relative binding rank order of the drugs towards Co-PDF was also determined. The results were validated by a corresponding set of control experiments in which the target molecules were excluded from the process. In principle, high-throughput micro-size exclusion chromatography, coupled with capLC/MS, offers a powerful technique as a preliminary screen in determining both the strong binding affinity and the relative affinity rank ordering of ligands towards a specific target macromolecule, and is complementary with other analytical drug screening techniques.     

亲和毛细管电泳测定孕酮与其单克隆抗体的结合常数

采用亲和毛细管电泳的配体分离模式,以激光诱导荧光作为检测手段,测定了荧光素标记的孕酮与孕酮我隆抗体之间的结合常数,并研究了温育时间、电泳条件等因素对测定的影响。     

Applications of capillary electrophoresis with laser-induced fluorescence for analysis of dGMP–BPDE adduct

DNA adducts are thought to be crucial to the initiation of mutational and carcinogenic processes. Polycyclic aromatic hydrocarbons (PAHs) have been identified as one major source of carcinogenic risk since they can bind to DNA thus forming an adduct. Quantification of this adduct is important because it may correlate to the risk for cancer development. In this study, the adduct formed between 2'-deoxyguanosine 5'-monophosphate and benzo[ a]pyrene-7,8-dihydrodiol-9,10-epoxide (BPDE) was analyzed by capillary electrophoresis. Both capillary zone electrophoresis (CZE) and micellar electrokinetic capillary chromatography (MECC) modes with laser-induced fluorescence detection were used for the separation and analysis of DNA adducts. The exploration of capillary electrophoresis in several modes provided different separation mechanisms in which the stereochemical forms of the adduct could be separated. The best result obtained was using a coated fused-silica capillary in Tris-TAPS buffer, which provided high sensitivity with a detection limit of 2.5x10(-9) mol L(-1). MECC separation of the BPDE adduct, although less sensitive, provided an efficient enantioselective separation option.