Order acceptance and scheduling on two identical parallel machines

We study the order acceptance and scheduling problem on two identical parallel machines. At the beginning of the planning horizon, a firm receives a set of customer orders, each of which has a revenue value, processing time, due date, and tardiness weight. The firm needs to select orders to accept and schedule the accepted orders on two identical parallel machines so as to maximize the total profit. The problem is intractable, so we develop two heuristics and an exact algorithm based on some optimal properties and the Lagrangian relaxation technique. We evaluate the performance of the proposed solution methods via computational experiments. The computational results show that the heuristics are efficient and effective in approximately solving large-sized instances of the problem, while the exact algorithm can only solve small-sized instances.     

Scheduling job families on non-identical parallel machines with time constraints

This paper studies the scheduling of lots (jobs) of different product types (job family) on parallel machines, where not all machines are able to process all job families (non-identical machines). A special time constraint, associated to each job family, should be satisfied for a machine to remain qualified for processing a job family. This constraint imposes that the time between the executions of two consecutive jobs of the same family on a qualified machine must not exceed the time threshold of the family. Otherwise, the machine becomes disqualified. This problem comes from semiconductor manufacturing, when Advanced Process Control constraints are considered in scheduling problems. To solve this problem, two Mixed Integer Linear Programming models are proposed that use different types of variables. Numerical experiments show that the second model is much more effective, and that there is a trade-off between optimizing the scheduling objective and maximizing the number of machines that remain qualified for the job families. Two heuristics are also presented and studied in the numerical experiments.     

Parallel machine scheduling problems with a single server

In this paper, we consider the problem of scheduling jobs on parallel machines with setup times. The setup has to be performed by a single server. The objective is to minimize the schedule length (makespan), as well as the forced idle time. The makespan problem is known to be NP-hard even for the case of two identical parallel machines. This paper presents a pseudopolynomial algorithm for the case of two machines when all setup times are equal to one. We also show that the more general problem with an arbitrary number of machines is unary NP-hard and analyze some list scheduling heuristics for this problem. The problem of minimizing the forced idle time is known to be unary NP-hard for the case of two machines and arbitrary setup and processing times. We prove unary NP-hardness of this problem even for the case of constant setup times. Moreover, some polynomially solvable cases are given.     

Stochastic cyclic scheduling problem in synchronous assembly and production lines

In this paper we address the stochastic cyclic scheduling problem in synchronous assembly and production lines. Synchronous lines are widely used in the production and assembly of various goods such as automobiles or household appliances. We consider cycle time minimisation (or throughput rate maximisation) as the objective of the scheduling problem with the assumption that the processing times are independent random variables. We first discuss the two-station case and present a lower bounding scheme and an approximate solution procedure for the scheduling problem. For the general case of the problem, two heuristic solution procedures are presented. An extension of the two-station lower bound to the general case of the problem is also discussed. The performance of the proposed heuristics on randomly generated problems is documented, and the impact of scheduling decisions on problems with different levels of variability in processing times are analysed. We also analyse the problem of sequence determination when the available information is limited to the expected values of individual processing times.     

Heuristics for the flow line problem with setup costs

This paper presents two new heuristics for the flowshop scheduling problem with sequence-dependent setup times (SDSTs) and makespan minimization objective. The first is an extension of a procedure that has been very successful for the general flowshop scheduling problem. The other is a greedy randomized adaptive search procedure (GRASP) which is a technique that has achieved good results on a variety of combinatorial optimization problems. Both heuristics are compared to a previously proposed algorithm based on the traveling salesman problem (TSP). In addition, local search procedures are developed and adapted to each of the heuristics. A two-phase lower bounding scheme is presented as well. The first phase finds a lower bound based on the assignment relaxation for the asymmetric TSP. In phase two, attempts are made to improve the bound by inserting idle time. All procedures are compared for two different classes of randomly generated instances. In the first case where setup times are an order of magnitude smaller than the processing times, the new approaches prove superior to the TSP-based heuristic; for the case where both processing and setup times are identically distributed, the TSP-based heuristic outperforms the proposed procedures.     

On a methodology for discrete–continuous scheduling

Discrete–continuous problems of scheduling nonpreemptable jobs on parallel machines are considered. The problems arise e.g. when jobs are assigned to multiple parallel processors driven by a common electric, hydraulic or pneumatic power source. Existing models have assumed job processing rates as a function of the number of jobs currently being processed, or equivalently the number of machines currently in operation. In this paper a more general model is proposed in which processing rates of a job assigned to a machine depend on the amount of a continuous, i.e. continuously divisible resource (e.g. power) allotted to this job at a time. Thus the problem consists of two interrelated subproblems: (i) to sequence jobs on machines, and (ii) to allocate the continuous resource among jobs already sequenced. We provide a comprehensive analysis of the problem. This includes properties of optimal schedules, efficiently (in particular analytically) solvable cases, formulations of the possibly simplest mathematical programming problems for finding optimal schedules in the general case, heuristics and the worst-case analysis. Although our objective function in this paper is to minimize makespan of a set of independent jobs, the presented methodology can be applied to other criteria, precedence-related jobs, and many resource types (apart from, or instead of machines).     

Scheduling jobs with release dates on parallel batch processing machines to minimize the makespan

Batch processing happens in many different industries, in which a number of jobs are processed simultaneously as a batch. In this paper we develop two heuristics for the problem of scheduling jobs with release dates on parallel batch processing machines to minimize the makespan and analyze their worst-case performance ratios. We also present a polynomial-time optimal algorithm for a special case of the problem where the jobs have equal processing times.     

Scheduling orders for multiple product types to minimize total weighted completion time

We consider the problem of scheduling orders for multiple different product types in an environment with m dedicated machines in parallel. The objective is to minimize the total weighted completion time. Each product type is produced by one and only one of the m dedicated machines; that is, each machine is dedicated to a specific product type. Each order has a weight and may also have a release date. Each order asks for certain amounts of various different product types. The different products for an order can be produced concurrently. Preemptions are not allowed. Even when all orders are available at time 0, the problem has been shown to be strongly NP-hard for any fixed number (?2) of machines. This paper focuses on the design and analysis of efficient heuristics for the case without release dates. Occasionally, however, we extend our results to the case with release dates. The heuristics considered include some that have already been proposed in the literature as well as several new ones. They include various static and dynamic priority rules as well as two more sophisticated LP-based algorithms. We analyze the performance bounds of the priority rules and of the algorithms and present also an in-depth comparative analysis of the various rules and algorithms. The conclusions from this empirical analysis provide insights into the trade-offs with regard to solution quality, speed, and memory space.     

Minimizing maximum completion time in a proportionate flow shop with one machine of different speed

A flow shop with identical machines is called a proportionate flow shop. In this paper, we consider the variant of the n-job, m-machine proportionate flow shop scheduling problem in which only one machine is different and job processing times are inversely proportional to machine speeds. The objective is to minimize maximum completion time. We describe some optimality conditions and show that the problem is NP-complete. We provide two heuristic procedures whose worst-case performance ratio is less than two. Extensive experiments with various sizes are conducted to show the performance of the proposed heuristics.     

A hybrid three-stage flowshop problem: Efficient heuristics to minimize makespan

We treat a problem of scheduling n jobs on a three stages hybrid flowshop of particular structure (one machine in the first and third stages and two dedicated machines in stage two). The objective is to minimize the makespan. This problem is NP-complete. We propose two heuristic procedures to cope with realistic problems. Extensive experimentation with various problem sizes are conducted and the computational results show excellent performance of the proposed heuristics.     

Exploiting process plan flexibility in production scheduling: A multi-objective approach

When solving a product/process design problem, we must exploit the available degrees of freedom to cope with a variety of issues. Alternative process plans can be generated for a given product, and choosing one of them has implications on manufacturing functions downstream, including planning/scheduling. Flexible process plans can be exploited in real time to react to machine failures, but they are also relevant for off-line scheduling. On the one hand, we should select a process plan in order to avoid creating bottleneck machines, which would deteriorate the schedule quality; on the other one we should aim at minimizing costs. Assessing the tradeoff between these possibly conflicting objectives is difficult; actually, it is a multi-objective problem, for which available scheduling packages offer little support. Since coping with a multi-objective scheduling problem with flexible process plans by an exact optimization algorithm is out of the question, we propose a hierarchical approach, based on a decomposition into a machine loading and a scheduling sub-problem. The aim of machine loading is to generate a set of efficient (non-dominated) solutions with respect to the load balancing and cost objectives, leaving to the user the task of selecting a compromise solution. Solving the machine loading sub-problem essentially amounts to selecting a process plan for each job and to routing jobs to the machines; then a schedule must be determined. In this paper we deal only with the machine loading sub-problem, as many scheduling methods are already available for the problem with fixed process plans. The machine loading problem is formulated as a bicriterion integer programming model, and two different heuristics are proposed, one based on surrogate duality theory and one based on a genetic descent algorithm. The heuristics are tested on a set of benchmark problems.     

Berth allocation with time-dependent physical limitations on vessels

We consider a berth allocation problem in container terminals in which the assignment of vessels to berths is limited by water depth and tidal condition. We model the problem as a parallel-machine scheduling problem with inclusive processing set restrictions, where the time horizon is divided into two periods and the processing sets in these two periods are different. We consider both the static and dynamic cases of the problem. In the static case all of the vessels are ready for service at time zero, while in the dynamic case the vessels may have nonzero arrival times. We analyze the computational complexity and develop efficient heuristics for these two cases. Computational experiments are performed to test the effectiveness of the heuristics and to evaluate the benefits of taking tidal condition into consideration when making berth allocation decisions.     

The wafer probing scheduling problem (WPSP)

The wafer probing scheduling problem (WPSP) is a variation of the parallel-machine scheduling problem, which has many real-world applications, particularly, in the integrated circuit (IC) manufacturing industry. In the wafer probing factories, the jobs are clustered by their product types, which must be processed on groups of identical parallel machines and be completed before the due dates. Further, the job processing time depends on the product type, and the machine setup time is sequence dependent on the orders of jobs processed. Since the wafer probing scheduling problem involves constraints on job clusters, job-cluster dependent processing time, due dates, machine capacity, and sequence dependent setup time, it is more difficult to solve than the classical parallel-machine scheduling problem. In this paper, we formulate the WPSP as an integer programming problem. We also transform the WPSP into the vehicle routing problem with time windows (VRPTW), a well-known network routing problem which has been investigated extensively. An illustrative example is given to demonstrate the proposed transformation. Based on the provided transformation, we present three efficient algorithms to solve the WPSP near-optimally.     

Evolutionary hybrid approaches for generation scheduling in power systems

Generation scheduling (GS) in power systems is a tough optimisation problem which continues to present a challenge for efficient solution techniques. The solution is to define on/off decisions and generation levels for each electricity generator of a power system for each scheduling interval. The solution procedure requires simultaneous consideration of binary decision and continuous variables. In recent years researchers have focused much attention on developing new hybrid approaches using evolutionary and traditional exact methods for this type of mixed-integer problems. This paper investigates how the optimum or near optimum solution for the GS problem may be quickly identified. A design is proposed which uses a variety of metaheuristic, heuristics and mathematical programming techniques within a hybrid framework. The results obtained for two case studies are promising and show that the hybrid approach offers an effective alternative for solving the GS problems within a realistic timeframe.     

A note on “A mixed integer programming model for advanced planning and scheduling (APS)”

In a recent paper, Chen and Ji [Chen, K., Ji, P., 2007. A mixed integer programming model for advanced planning and scheduling (APS). European Journal of Operational Research 181, 515–522] develop a mixed integer programming model for advanced planning and scheduling problem that considers capacity constraints and precedence relations between the operations. The orders require processing of several operations on eligible machines. The model presented in the above paper works for the case where each operation can be processed on only one machine. However, machine eligibility means that only a subset of machines are capable of processing a job and this subset may include more than one machine. We provide a general model for advanced planning and scheduling problems with machine eligibility. Our model can be used for problems where there are alternative machines that an operation can be assigned to.     

Fuzzy scheduling of job orders in a two-stage flowshop with batch-processing machines

In this paper, we present a mixed-integer fuzzy programming model and a genetic algorithm (GA) based solution approach to a scheduling problem of customer orders in a mass customizing furniture industry. Independent job orders are grouped into multiple classes based on similarity in style so that the required number of setups is minimized. The family of jobs can be partitioned into batches, where each batch consists of a set of consecutively processed jobs from the same class. If a batch is assigned to one of available parallel machines, a setup is required at the beginning of the first job in that batch. A schedule defines the way how the batches are created from the independent jobs and specifies the processing order of the batches and that of the jobs within the batches. A machine can only process one job at a time, and cannot perform any processing while undergoing a setup. The proposed formulation minimizes the total weighted flowtime while fulfilling due date requirements. The imprecision associated with estimation of setup and processing times are represented by fuzzy sets.     

A mathematical programming model and solution for scheduling production orders in Shanghai Baoshan Iron and Steel Complex

In this paper, we investigate the production order scheduling problem derived from the production of steel sheets in Shanghai Baoshan Iron and Steel Complex (Baosteel). A deterministic mixed integer programming (MIP) model for scheduling production orders on some critical and bottleneck operations in Baosteel is presented in which practical technological constraints have been considered. The objective is to determine the starting and ending times of production orders on corresponding operations under capacity constraints for minimizing the sum of weighted completion times of all orders. Due to large numbers of variables and constraints in the model, a decomposition solution methodology based on a synergistic combination of Lagrangian relaxation, linear programming and heuristics is developed. Unlike the commonly used method of relaxing capacity constraints, this methodology alternatively relaxes constraints coupling integer variables with continuous variables which are introduced to the objective function by Lagrangian multipliers. The Lagrangian relaxed problem can be decomposed into two sub-problems by separating continuous variables from integer ones. The sub-problem that relates to continuous variables is a linear programming problem which can be solved using standard software package OSL, while the other sub-problem is an integer programming problem which can be solved optimally by further decomposition. The subgradient optimization method is used to update Lagrangian multipliers. A production order scheduling simulation system for Baosteel is developed by embedding the above Lagrangian heuristics. Computational results for problems with up to 100 orders show that the proposed Lagrangian relaxation method is stable and can find good solutions within a reasonable time.     

The interface of buffer design and cyclic scheduling decisions in deterministic flow lines

In this paper, we address some issues on the interface of buffer design and cyclic scheduling decisions in a multi-product deterministic flow line. We demonstrate the importance of the above interface for the throughput performance of the flow line. In particular, we point out that the use of sequence-independent information, such as workload distribution and variability in processing times among stations, is not adequate to decide the optimal buffer configuration of the flow line. We formulate the buffer design problem for a fixed sequence of jobs as a general resource allocation problem, and suggest two effective heuristics for its solution. For the simultaneous buffer design and cyclic scheduling problem, we suggest an iterative scheme that builds on the effectiveness of the above heuristics. One of the side results of our extensive computational studies on this problem is that the general guidelines of buffer design in single-product flow lines with stochastic processing times are not directly transferable to the multiproduct deterministic flow line environment.     

A contribution to the stochastic flow shop scheduling problem

This paper deals with performance evaluation and scheduling problems in m machine stochastic flow shop with unlimited buffers. The processing time of each job on each machine is a random variable exponentially distributed with a known rate. We consider permutation flow shop. The objective is to find a job schedule which minimizes the expected makespan. A classification of works about stochastic flow shop with random processing times is first given. In order to solve the performance evaluation problem, we propose a recursive algorithm based on a Markov chain to compute the expected makespan and a discrete event simulation model to evaluate the expected makespan. The recursive algorithm is a generalization of a method proposed in the literature for the two machine flow shop problem to the m machine flow shop problem with unlimited buffers. In deterministic context, heuristics (like CDS [Management Science 16 (10) (1970) B630] and Rapid Access [Management Science 23 (11) (1977) 1174]) and metaheuristics (like simulated annealing) provide good results. We propose to adapt and to test this kind of methods for the stochastic scheduling problem. Combinations between heuristics or metaheuristics and the performance evaluation models are proposed. One of the objectives of this paper is to compare the methods together. Our methods are tested on problems from the OR-Library and give good results: for the two machine problems, we obtain the optimal solution and for the m machine problems, the methods are mutually validated.     

Flexible flow shop scheduling with uniform parallel machines

We consider the multistage flexible flow shop scheduling problem with uniform parallel machines in each stage and the objective of minimizing makespan. We develop a general class of heuristics for this strongly NP-hard problem that extend several well-known heuristics for the corresponding embedded serial flow shop problem, and obtain absolute performance guarantees for heuristics in this class by building on similar absolute performance guarantees for the corresponding serial flow shop heuristics. Our approach is quite robust, since it can extend any heuristic for the serial flow shop problem (with an absolute performance guarantee) to a similar one for the flexible flow shop problem with uniform parallel machines.