Absorption and photoluminescence of Buriti oil/polystyrene and Buriti oil/poly(methyl methacrylate) blends

This work reports the preparation and characterization of Buriti (Mauritia flexuosa L.) oil/polystyrene (PS) and Buriti oil/poly(methyl methacrylate) blends. The Buriti is an abundant palm tree of the Amazon region. This oil was used because of its chemical composition (high concentrations of oleic acid, tocopherols and carotenoids, especially β-carotene) and interesting optical properties, such as absorption and photoluminescence. The incorporation of the vegetable oil in the PS and PMMA matrices renders orange-colored blends, which were verified to absorb UV-Vis radiation and emit light in the green region. The intensity of these properties is proportional to the oil content in the samples. Micrographs of the blends showed that the oil is located in cavities distributed in the polymeric matrices. This work shows that it is possible to employ the Buriti oil, a cheaper and abundant natural resource, to improve absorption and light emission properties of PS and PMMA polymers.     

Glass transition temperature and thermal decomposition of cellulose powder

Cellulose powder and cellulose pellets obtained by pressing the microcrystalline powder were studied using differential scanning calorimetry (DSC), differential thermal analysis (DTA), and thermal gravimetry (TG). The TG method enabled the assessment of water content in the investigated samples. The glass phase transition in cellulose was studied using the DSC method, both in heating and cooling runs, in a wide temperature range from −100 to 180 °C. It is shown that the DSC cooling runs are more suitable for the glass phase transition visualisation than the heating runs. The discrepancy between glass phase transition temperature T _g found using DSC and predictions by Kaelbe’s approach are observed for “dry” (7 and 5.3% water content) cellulose. This could be explained by strong interactions between cellulose chains appearing when the water concentration decreases. The T _g measurements vs. moisture content may be used for cellulose crystallinity index determination.     

Studies on phase morphology and thermo-physical properties of nitrile rubber blends

The study deals with the morphological and thermal analysis of binary rubber blends of acrylonitrile-co-butadiene rubber (NBR) with another polymer. Either ethylene propylene diene terpolymer (EPDM), ethylene vinyl acetate (EVA), chlorosulphonated polyethylene (CSM), or polyvinyl chloride (PVC) has been selected for the second phase. Depending on the relative polarity and interaction parameter of the components, the binary blends showed development of a bi-phasic morphology through scanning electron microscopy (SEM). Use of different types of thermal analysis techniques revealed that these blends are generally incompatible excepting one of NBR and PVC. Derivative differential scanning calorimetry (DDSC), in place of conventional DSC, has been used to characterize the compatibility behavior of the blends. NBR–PVC shows appearance of only one glass transition temperature (T _g) averaging the individual T _g’s of the blend components. The partially missible blend of NBR and CSM shows a broadening of T _g interval between the phase components, while the immiscible blends of either NBR–EPDM or NBR–EVA do not show any change in T _g values corresponding to the individual rubbers of their blend. The experimental T _g values were also compared with those calculated theoretically by Fox equation and observed to match closely with each other. Studies have also been made to evaluate the thermal stability of these blends by thermo-gravimetric analysis (TG) and evaluation of activation energy of respective decomposition processes by Flynn and Wall method. Thermo-mechanical analysis (TMA) was found to be effective for comparison of creep recovery and dimensional stability of the blends both at sub-ambient as well as at elevated temperatures.     

Edible wheat gluten (WG) protein films

Commercial wheat gluten (WG) films, hard wheat gluten films and soft wheat gluten films, plasticized with glycerol have been cast from water–ethanol solutions. The effect of aging on various film properties has been investigated. The films were aged for about 6 months at 50% relative humidity and ~25 °C, and the mechanical (tensile strength and the percentage of elongation at break (E _b)), thermal (TG and DSC) and Attenuated Total Reflectance (ATR)-FTIR spectral properties have been studied. Changes in the protein structure were determined by ATR-FTIR spectroscopy. Films from soft WG exhibited the highest E _b (508%) and the highest TS (6.33 MPa). The TG analysis results show that the moisture content in all three kinds of WG protein films is about 5%. The absence of the glycerol phase transition in DSC curves implies that there is no separate phase containing glycerol in the WG protein-glycerol films with 40% glycerol.     

Thermal stability and degradation of Co(II), Cd(II), and Zn(II) complexes with <Emphasis Type="Italic">N</Emphasis>-benzyloxycarbonylglycinato ligand

Thermal behavior of Co(II), Cd(II), and Zn(II) complexes with N-benzyloxycarbonylglycinato ligand was investigated using the results of TG, DSC and DTG analysis obtained at different heating rates (2.5 to 30 °C min⁻¹), from room temperature to about 900 °C. Mechanisms of complex degradation, as well as enthalpies of the degradation processes were determined. It is shown that thermal stability of investigated complexes correlates with their crystal structures, especially with the presence of crystallization and coordinated water molecules. The values of dehydration enthalpies are discussed and correlated with composition of the complexes. Kissinger’s, Ozawa’s, and Friedman’s isoconversion methods were used for the determination of kinetic parameters: the pre-exponential factor A and the apparent activation energy E _a. For all three complexes and all steps of degradation, the values of kinetics parameters obtained by Kissinger’s and Ozawa’s methods are in good agreement. The results obtained by Friedman’s method showed that some decomposition steps are simple and some others are complex ones.     

Thermal and structural studies of polypropylene blended with esterified industrial waste lignin

Microwave-assisted chemical modification of lignin was achieved through esterification using maleic anhydride. Modified lignin (ML) was blended in different proportions up to 25 mass% with polypropylene (PP) using Brabender electronic Plasticorder at 190 °C. The structural and thermal properties of blends were investigated by thermogravometric analysis (TG), differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD) and scanning electron microscopy (SEM). TG analysis showed increased thermal stability of blends due to antioxidant property of ML, which opposed oxidative degradation of PP. DSC analysis indicted slight depression in a glass transition temperature and melting temperature of blends due to partial miscible blend behavior between PP and ML. All blends showed higher crystallization temperatures and continuously reducing percentage crystallinity with increasing ML proportion in the blends. WAXD analysis indicated that PP crystallized in β polymeric form in addition to α-form in the presence of ML. However, proportion of β-form did not show linear relation with increase in ML proportion, thus ML acts as β nucleating agent in the PP matrix. SEM analysis showed good dispersion/miscibility in PP matrix indicating modification in lignin is useful.     

Influence of cobalt complex on thermal properties of poly(ethylene terephthalate)/polycarbonate blend

The effects of processing time and concentration of cobalt acetylacetonate III complex in poly(ethylene terephthalate)/polycarbonate reactive blending were investigated. The blend was prepared in an internal mixer at 270°C, 60 rpm, at different processing times (5–20 min) and catalyst concentration (0.00625–0.075 mass%). The reaction product was evaluated by differential scanning calorimetry (DSC), thermogravimetry (TG) and wide angle X-rays scattering (WAXS). In general, the DSC curves showed two glass transition temperatures (T _g’s) close to each homopolymer, independent of the processing time and complex’s concentration, suggesting the presence of two phases: one rich in PET and other one rich in PC. In all cases, melting temperature (T _m), cold crystallization temperature (T _cc) and crystallinity degree (X _c) were progressively reduced with blending conditions. The TG curves presented two decays. The first one represented the PET rich phase and the other one was related to the PC phase. The WAXS diffractograms showed that the Bragg’s angle and interplanar spacing of PET remaining practically unchanged.     

Thermal and Rheological Behavior of Collagen. Chitosan blends

Collagen:chitosan blends in 1:1 ratio were prepared and characterized by Fourier transform infrared spectroscopy, thermal (DSC, TG) and rheological studies. Apparently each material maintains its behavior and addition of chitosan does not denature collagen fibers. The rheological behavior showed that adding chitosan to collagen causes a decrease of storage modulus (G’),viscous loss modulus (G”) and apparent viscosity when measured as a function of frequency. Both anionic and native collagen presented more solid-like behavior than fluid-like viscoelastic behavior. Collagen:chitosan blends exhibits a more fluid-like viscoelastic behavior. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal properties of microcrystalline cellulose-filled PET–PTT blend polymer composites

Polymer composite materials were prepared from poly(ethylene terephthalate)–poly(trimethylene terephthalate) blends as the matrix and different microcrystalline cellulose (MCC) filler levels (0–40 wt%) using melt compounding followed by compression molding. The composites were analyzed using dynamic mechanical thermal analysis (DMTA), differential scanning calorimetry (DSC) and thermogravimetric analysis (TG). The DSC results indicated that there is no consistent or significant influence of the MCC addition on the glass transition (T _g), melting (T _m), and crystallization temperature of the composites. With increasing MCC content, dynamic mechanical properties improved because of the reinforcing effect of the MCC. The tan δ peak values from the DMTA were not significantly changed as the MCC content increased. TG indicated that the onset temperature of rapid thermal degradation decreased with increasing MCC content. It was also found that the thermal stability of the composites slightly decreased as the MCC content increased.     

Thermal decomposition of nicotinate complexes of cobalt and nickel in dynamic nitrogen atmosphere

Thermal decomposition of cobalt and nickel nicotinate was studied by TG, DTG and DSC. The mechanism of decomposition has been established from TG and DSC data. The kinetic parameters namelyE, A together with ΔH were calculated from DSC curves using mechanistic and non-mechanistic integral equations.

---

Zusammenfassung Mittels TG, DTG und DSC wurde die thermische Zersetzung von Cobaltund Nickelnikotinat untersucht. Der Zersetzungsmechanismus wurde anhand der TG-und DSC-Daten entwickelt. Die kinetischen ParameterE, A wurden zusammen mit ΔH anhand der DSC-Kurven mit Hilfe von mechanistischen und nichtmechanistischen Integrationsgleichungen berechnet.

     

Thermal properties and phase transitions in blends of Nylon-6 with silk fibroin

The thermal and structural properties of binary blends of Nylon-6 (N6) and a chemically related biopolymer, Bombyx mori silk fibroin (SF), are reported in this work. Homopolymers and blends, in composition ratios of N6/SF ranging from 95/05 to 70/30, were investigated by thermogravimetric (TG) analysis, differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy and wide angle X-ray scattering (WAXS). Silk fibroin typically degrades at temperatures just above 210°C, which occurs within the melting endotherm of N6. In TG studies, the measured mass remaining was slightly greater than expected, indicating the blends had improved thermal stability. No beta sheet crystals of SF were detected by FTIR analysis of the Amide I region. Strong interaction between N6 and SF chains was observed, possibly as a result of formation of hydrogen bonds between N6 and SF chains. DSC analysis showed that the addition of SF to N6 caused a decrease in the crystallization temperature, the melting temperature of the lowest melting crystals and the crystallinity of N6. Furthermore, the α-crystallographic phase dominates and the γ-crystallographic phase was not observed in N6/SF blends, in contrast to the homopolymer N6, which contains both phases. We suggest that the addition of SF might result in changes of the chain extension of N6, which lead to the appearance of α-rather than γ-phase crystals.     

Characterization of Rubber Epoxy Blends by Thermal Analysis

Differential scanning calorimetry (DSC), thermogravimetric analysis (TG) and dynamic mechanical analysis (DMA) of the blends ofepoxy cresol novolac (ECN) resin toughened with liquid carboxy terminated butadiene-co-acrylonitrile (CTBN) rubber have been carried out. Exothermal heat of reaction (ΔH) due to crosslinking of the resin in presence of diaminodiphenyl methane(DDM, as amine hardener) showed a decreasing trend with increasing rubber concentration. Enhancements of thermal stability as well as lower percentage mass loss of the epoxy-rubber blends with increasing rubber concentration have been observed in TG. Dynamic mechanical properties reflected a monotonic decrease in the storage modulus (E′) with increasing rubber content in the blends. The loss modulus (E″) and the loss tangent(tanδ) values, however, showed an increasing trend with rise of the temperature up to a maximum (peak) followed by a gradual fall in both cases. Addition of 10 mass% of CTBN resulted maximum E″ and tanδ. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal Behavior of VARIOUS sulfone-based diimid-diacids Solvated with Polar Organic Solvents

Thermal analysis techniques were performed to reveal ‘crystalline solvate’ behavior between organic compounds and polar solvents. Diimide-dicarboxylic acid (DIDA) was formed by reacting 3,3'-diaminodiphenylsulfone (3,3'-DPS) or 4,4'-diaminodiphenylsulfone (4,4'-DPS) with trimellitic anhydride (TMA) in some polar solvents (PSv). The products could crystallize upon cooling in a polar solvent media to form a solvate containing a finite quantity of solvents, leading to what can be termed as ‘crystalline solvates’ (CS). This study has demonstrated that sampling techniques in TG and DSC must be kept to be as similar as possible, which is a critical point in practices of thermal analysis techniques. DSC analysis revealed that there are two endothermic peaks in the CS, with the lower one being the de-solvate temperature of CS (T _d) at which the solvated solvent molecules were removed, and the higher peak being the melting point of the de-solvated DIDA (T _m). T _d was found to vary with the types of polar solvents and structures of DIDA. The TG result indicated that most of the sulfone-based DIDA-CS contained 2 moles of solvent per mole of solvate. X-ray analysis revealed that different crystalline structures were found for DIDA-CS solvated with different solvent molecules, but all de-solvated DIDA possessed the same crystal unit. This revised version was published online in July 2006 with corrections to the Cover Date.     

Cetane number and thermal properties of vegetable oil,biodiesel, 1-butanol and diesel blends

Vegetable oil derived fuels for diesel engines are becoming important as alternative to petroleum diesel fuels due to their environmental friendliness and availability. Ignition quality in compression ignition (CI) engines is influenced by thermal characteristics and fuel properties. In this study, the effects of vegetable oil transesterification and vegetable oil–1-butanol-diesel blends on fuel properties, cetane number (CN) and thermal characteristics were experimentally investigated. Methyl esters (biodiesel) and 10% vegetable oil–10% 1-butanol–80% diesel blends were prepared from croton oil (CRO), coconut oil (COO) and jatropha oil (JAO). CN was measured in a CFR F-5 engine, and a thermogravimetric analysis (TG), as well as the determination of fuel properties of vegetable oils, biodiesels and blends was carried out. It can be observed for vegetable oils that they possess low volatility characteristics, low CN and high viscosity different from those of biodiesels, blends and diesel fuel. It was observed that biodiesels and blends exhibit similarities with diesel in the fuel characteristics, CN and TG curves.     

Development of forensic analytical chemistry method for examination of Merla by thermal analysis and high resolution gas chromatography

The objective of this work is the TG and DSC analysis of “Merla” samples as well as the separation and identification of organic compounds by Ultra Fast GC method. The obtained results showed the grouping and the establishment of the degree of the sample’s similarity based in the Euclidean Distance. The cluster was a useful tool to determine if the samples, confiscated from different users by police, were manufactured in the same or different laboratories. Consequently one can conclude if in any city operates one or more drug manufacturing laboratories.     

The crystallinity and miscibility of syndiotactic polystyrene blends after mixing with low molar mass liquid crystal or commercial lubricant

The quantities of the crystallinity of syndiotactic polystyrene (SPS) blended with another polymer in the group of poly(α-methyl styrene), poly(n-butyl methacrylate) or poly(cyclohexyl acrylate) with or without the additives were measured by X-ray diffraction and calculated by Ruland’s method. The SPS was synthesized by using metallocene catalyst and modified-methylaluminoxane as cocatalyst. The additive of low molar mass liquid crystal chemical (cyclohexyl-biphenyl-cyclohexane (CBC33)) or lubricant (glycerol monostearate (GMS)) was individually added to the blends of SPS in order to investigate the effects on the crystallinity of the blended SPS. From the experimental results, it was found that the percent crystallinities of the blends decreased with decreasing the percent of SPS in the blend because of the dilution of SPS. The depression of the percent crystallinity was in the order of PaMS > PCHA > PBMA according to the compatibility with SPS. The addition of GMS or CBC33 slightly decreased the percent crystallinity of the pure SPS. The addition of GMS impeded the depression of the SPS crystallinity in the blends, because their percent depression from pure SPS is similar (at around 25%) regardless to the components of the blends. The blends with added CBC33 have the similar depression of crystallinity as the pure blends because of the low concentration of CBC33 and the good compatibility of CBC33 with the SPS.     

Thermal properties of anhydride-cured bio-based epoxy blends

Epoxidized palm oil (EPO) (0–12 wt%) was added into petrochemical-based epoxy blends (diglycidyl ether of bisphenol-A (DGEBA)/cycloaliphatic epoxide resin/epoxy novolac resin) to develop a thermal curable bio-based epoxy system. The thermal behaviors of the EPO, epoxy blends (EB), and bio-based epoxy blends (EB/EPO) were characterized using differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMT) and thermo-mechanical analysis (TM). The glass transition temperature (T _g) and storage modulus (E′) of the EB/EPO system was reduced with the increasing of the EPO loading. This is attributed to the plasticizing effect of the EPO. It was found that epoxy blends with higher loading of EPO possessed higher coefficient of thermal expansion (CTE) and tanδ value. This is due to the increase of the free volume and chain flexibility in the three-dimensional network of the epoxy blends. The internal thermal stresses of the EB/EPO were decreased as the increasing loading of EPO, owing to the reduction of crosslink density, modulus of elasticity, and T _g in the epoxy blends.     

On the oximine complexes of transitionmetals

Fourteen chelates of the type [Ni(II)(Diox.H)₂], ((Diox.H)₂: various α-dioximes) have been studied by means of FTIR, NMR, MS data and various thermoanalytical methods (TG, DTA, DTG, DSC). In some cases kinetic parameters of the thermal decomposition of the complexes were also calculated using Zsakó’s ‘nomogram method’. The mechanism of the decomposition processes was characterised on the basis of mass spectra.     

Thermal studies on polymorphic structures of tibolone

Tibolone polymorphic forms I (monoclinic) and II (triclinic) have been prepared by recrystallization from acetone and toluene, respectively, and characterized by different techniques sensitive to changes in solid state, such as polarized light microscopy, X-ray powder diffractometry, thermal analysis (TG/DTG/DSC), and vibrational spectroscopy (FTIR and Raman microscopy). The nonisothermal decomposition kinetics of the obtained polymorphs were studied using thermogravimetry. The activation energies were calculated through the Ozawa’s method for the first step of decomposition, the triclinic form showed a lower E _a (91 kJ mol⁻¹) than the monoclinic one (95 kJ mol⁻¹). Furthermore, Raman microscopy and DSC at low heating rates were used to identify and follow the thermal decomposition of the triclinic form, showing the existence of three thermal events before the first mass loss.