Synthesis of ordered mesoporous carbonaceous materials and their highly efficient capture of uranium from solutions

An extremely effortless method was applied for successful synthesis of mesoporous carbonaceous materials(MCMs) using well-ordered mesoporous silica as template. Various characterizations(scanning electron microscopy(SEM), transmission electron microscopy(TEM), X-ray diffraction(XRD), Fourier transform infrared spectroscopy(FT-IR), Raman, X-ray photoelectron spectroscopy(XPS), Brunner-Emmet-Teller(BET) and Zeta potential) confirmed that MCMs had large surface area, uniform pore size distribution, and abundant oxygen-containing functional groups. The batch techniques were employed to study U(VI) adsorption on MCMs under a wide range of experiment conditions. The adsorption kinetics of U(VI) onto MCMs were well-fitted by pseudo-second-order kinetic model, indicating a chemisorption process. The excellent adsorption capacity of MCMs calculated from the Langmuir model was 293.95 mg g~(-1) at pH 4.0. The FT-IR and XPS analyses further evidenced that the binding of U(VI) onto MCMs was ascribed to the plentiful adsorption sites(–OH and –COOH groups) in the internal mesoporous structure, which could efficiently trap guest U(VI) ions. The results presented herein revealed that MCMs were ideal adsorbents in the efficient elimination of uranium or other lanthanides/actinides from aqueous solutions, which would play an important role in environmental pollution management application.     

Biosorption behaviors of uranium (VI) from aqueous solution by sunflower straw and insights of binding mechanism

Uranium (VI)-containing water has been recognized as a potential longer-term radiological health hazard. In this work, the sorptive potential of sunflower straw for U (VI) from aqueous solution was investigated in detail, including the effect of initial solution pH, adsorbent dosage, temperature, contact time and initial U (VI) concentration. A dose of 2.0 g L^?1 of sunflower straw in an initial U (VI) concentration of 20 mg L^?1 with an initial pH of 5.0 and a contact time of 10 h resulted in the maximum U (VI) uptake (about 6.96 mg g^?1) at 298 K. The isotherm adsorption data was modeled best by the nonlinear Langmuir–Freundlich equation. The equilibrium sorption capacity of sunflower straw was observed to be approximately seven times higher than that of coconut-shell activated carbon as 251.52 and 32.37 mg g^?1 under optimal conditions, respectively. The positive enthalpy and negative free energy suggested the endothermic and spontaneous nature of sorption, respectively. The kinetic data conformed successfully to the pseudo-second-order equation. Furthermore, energy dispersive X-ray, fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy demonstrated that U (VI) adsorption onto sunflower straw was predominantly controlled by ion exchange as well as complexation mechanism. The study revealed that sunflower straw could be exploited for uranium remediation of aqueous streams as a promising adsorbent.     

Synthesis,characterization, and application of polystyrene adsorbents containing tri-n-butylphosphate for solid-phase extraction of uranium (VI) from aqueous nitrate solutions

Polystyrene adsorbent for solid-phase extraction of U(VI) was developed through in situ copolymerization of styrene and divinylbenzene in the presence of tri-n-butylphosphate and its magnetic form was obtained by addition of fine particles of magnetite in an amount of 15 wt% of the total monomers used. The obtained adsorbents were characterized by means of scanning electron microscope, FTIR spectroscopy and X-ray powder diffraction. The adsorption behavior of U(VI) from aqueous nitrate solutions onto non-magnetic adsorbent RI (St–DVB–TBP) and its magnetic form RII (St–DVB–TBP–Fe₃O₄) at different experimental condition was studied using batch method. The adsorption results were found to fit Langmuir model. The magnetite-containing adsorbent showed higher uptake values relative to the corresponding magnetite-free one. The adsorption of U(VI) onto RI followed pseudo-first order kinetics whereas the adsorption onto RII followed pseudo-second order. Thermodynamic studies revealed that the adsorption process was a spontaneous exothermic reaction. Desorption of the loaded U(VI) was carried out using distilled water and found to be 97 and 93 % for RI and RII, respectively.     

Preparation and adsorption performance of 5-azacytosine-functionalized hydrothermal carbon for selective solid-phase extraction of uranium

A new solid-phase extraction adsorbent was prepared by employing a two-step "grafting from" approach to anchor a multidentate N-donor ligand, 5-azacytosine onto hydrothermal carbon (HTC) microspheres for highly selective separation of U(VI) from multi-ion system. Fourier-transform infrared and X-ray photoelectron spectroscopies were used to analyze the chemical structure and properties of resultant HTC-based materials. The adsorption behavior of U(VI) onto the adsorbent was investigated as functions of pH, contact time, ionic strength, temperature, and initial U(VI) concentration using batch adsorption experiments. The U(VI) adsorption was of pH dependent. The adsorption achieved equilibrium within 30min and followed a pseudo-second-order equation. The adsorption amount of U(VI) increased with raising the temperature from 283.15 to 333.15K. Remarkably, high ionic strength up to 5.0molL(-1) NaNO(3) had only slight effect on the adsorption. The maximum U(VI) adsorption capacity reached 408.36mgg(-1) at 333.15K and pH 4.5. Results from batch experiments in a simulated nuclear industrial effluent, containing 13 co-existing cations including uranyl ion, showed a high adsorption capacity and selectivity of the adsorbent for uranium (0.63mmolUg(-1), accounting for about 67% of the total adsorption amount).     

Synthesis, characterization, thermodynamic and kinetic investigations on uranium (VI) adsorption using organic-inorganic composites: Zirconyl-molybdopyrophosphate-tributyl phosphate

Zirconyl-molybdopyrophosphate-tributyl phosphate (ZMPP-TBP) was a novel organic-inorganic composite adsorbent prepared by co-precipitation method and used in the adsorption of uranium from aqueous solution in batch adsorption experiments. The as-obtained product was characterized using SEM, energy dispersive X-ray spectroscopy (EDX), XRD and BET-N₂ adsorption measurements. The study had been conducted to investigate the effects of solution pH, temperature, contact time, initial concentration and coexisting ions. A maximum removal of 99.31% was observed for an initial concentration 5 mg/L, at pH 6.0 and an adsorbent dose of 1.0 g/L. The isothermal data were fitted with both Langmuir and Freundlich equations, but the data fitted the former better than the latter. According to the evaluation using the Langmuir equation, the maximum adsorption capacity of uranium (VI) was 196.08 mg/g at 293 K and pH 6.0. The pseudo-first-order kinetic model and pseudo-second-order kinetic model were used to describe the kinetic data, and the pseudo-second-order kinetic model was better. The thermodynamic parameter ΔG was calculated, the negative ΔG values of uranium (VI) at different temperature showed that the adsorption process was spontaneous. The good reusability of ZMPP-TBP also indicated that the ZMPP-TBP was a very promising adsorbent for uranium adsorption from aqueous solution.     

Validation of a Monte Carlo HPGe detector model against irradiated foil gamma-ray spectroscopy measurements

In order to separate and pre-concentrate uranium from aqueous phase, a novel silica-based adsorbent was prepared by impregnating nalidixic acid (HNA) into a macroreticular silica/polymer composite support (SiO₂-P) with a mean diameter of 60 μm. Adsorption behavior of uranium from aqueous solution onto the adsorbent was studied. Experimental results indicated that HNA/SiO₂-P showed strong adsorption for uranium in a wide range of pH from 3.5 to 10.0, and the maximum adsorption capacity was 35.4 mg g⁻¹. In addition, HNA/SiO₂-P exhibited good selectivity for U(VI) and showed weak or bare adsorption affinity to foreign ions. Kinetic and isotherm of uranium adsorption were in accordance with the pseudo-second-order kinetic model and Langmuir isotherm adsorption model, respectively. Moreover, U(VI) sorption was found to be an endothermic reaction and spontaneous under experimental state. The synthesized adsorbent showed an admirable stability at lower pH values in aqueous solution.

     

Adsorption of uranium (VI) from aqueous solution by tetraphenylimidodiphosphinate

The adsorption of uranium (VI) using tetraphenylimidodiphosphinate (Htpip) was studied. Factors of affecting sorption efficiency have been investigated and results showed the adsorption of uranium (VI) was equilibrium at pH 4.5, time 20 min, adsorbent dosage 0.005 g and initial concentration 50 mg L^?1 reaching 99.86 mg g^?1 of adsorption capacity and 99.86% of removal efficiency. Additionally, the interfering ions studies showed that the adsorbent possessed excellent adsorption selectivity of uranium (VI). The surface morphology of Htpip was investigated by SEM. The adsorption process of uranium (VI) onto Htpip fit the pseudo-second-order kinetic model and the Freundlich isotherm model very well.     

Adsorption of uranium from aqueous solution using HDTMA+-pillared bentonite: isotherm, kinetic and thermodynamic aspects

The ability of hexadecyltrimethylammonium cation pillared bentonite (HDTMA⁺-bentonite) has been explored for the removal and recovery of uranium from aqueous solutions. The adsorbent was characterized using small-angle X-ray diffraction, high resolution transmission electron microscopy, and Fourier transform infrared spectroscopy. The influences of different experimental parameters such as solution pH, initial uranium concentration, contact time, dosage and temperature on adsorption were investigated. The HDTMA⁺-bentonite exhibited the highest uranium sorption capacity at initial pH of 6.0 and at 80?min. Adsorption kinetics was better described by the pseudo-second-order model and adsorption process could be well defined by the Langmuir isotherm. The thermodynamic parameters, ??G° (308?K), ??H°, and ??S° were determined to be ?31.64, ?83.84?kJ/mol, and ?169.49?J/mol/K, respectively, which demonstrated the sorption process of HDTMA⁺-bentonite towards U(VI) was feasible, spontaneous, and exothermic in nature. The adsorption on HDTMA⁺-bentonite was more favor than Na-bentonite, in addition the saturated monolayer sorption capacity increased from 65.02 to 106.38?mg/g at 298?K after HDTMA⁺ pillaring. Complete removal (??100%) of U(VI) from 1.0?L simulated nuclear industry wastewater containing 10.0?mg U(VI) ions was possible with 1.5?g HDTMA⁺-bentonite.     

Highly efficient removal of uranium(VI) from aqueous solutions by poly(acrylic acid-co-acrylamide) hydrogels

In this study, poly(acrylic acid-co-acrylamide) (PAAAM) hydrogels were used to remove uranium (VI) ions in wastewater and characterized by FTIR, SEM, EDX. The effects of pH value, coexistence of ionic strength, contact time, initial U (VI) ion concentration and adsorption temperature were also studied. Adsorption data fitted well with pseudo-second-order, intra-particle diffusion model and Langmuir isotherm mode, the maximum adsorption capacity of U(VI) was 713.24 mg g^?1. Thermodynamic analysis shows that the adsorption of U(VI) is spontaneous endothermic. PAAAM hydrogel has excellent regeneration performance, after five time adsorption–desorption cycles, the adsorbent still maintained 99.24% adsorption capacity.     

Synthesis of a cellulose derivative for enhanced sorption and selectivity of uranium from phosphate rocks prior to its fluorometric determination

In this research work, the separation of Uranium from phosphate medium via adsorption prior to its fluorometric determination was carried out onto a newly synthesised adsorbent made via impregnation of urea onto cellulose (UIC). The full characterisation of the synthetic extractant (UIC) was carried out by various instrumental techniques such as elemental analysis, FTIR, TGA, XRD and SEM analysis. Various factors that may affect the quality of adsorbing U (VI) ions using synthesised Urea-impregnated cellulose had been investigated. The maximum adsorption capacity (82 mg/g) for U (VI) has been verified by the Langmuir isotherm model. The thermodynamics and kinetics of the adsorption process indicated that the uranium sorption onto synthesised Urea-impregnated cellulose was an exothermic and pseudo-second-order process. The tolerance limits for the common cations which are actually found with uranium in the phosphate solutions and may show sorption behaviour on the synthesised UIC resin were calculated and gave a high tolerance limit. Contrary to previously reported studies, several ameliorations have resulted including an elevated selectivity and adsorption capacity of uranium from phosphate medium. The optimised method was applied with good accuracy results for determination of uranium in reference and different phosphate rock types bearing uranium.     

Uranium extraction from aqueous solution using dried and pyrolyzed tea and coffee wastes

The adsorption of U(VI) onto dried and pyrolyzed tea and coffee wastes was investigated. The adsorption properties of the materials were characterized by measuring uranium uptake as a function of solution pH, kinetics and adsorption isotherms. pH profile of uranium adsorption where UO₂ ²⁺ is expected to be the predominant species was measured between pH 0 and 4. Both Langmuir and Freundlich adsorption models were used to describe adsorption equilibria, and corresponding constants evaluated. Using the Langmuir model, the maximum adsorption capacity of uranium by dried tea and coffee wastes was 59.5 and 34.8 mg/g, respectively at 291 K. Adsorption thermodynamic constants, ΔH° ΔS° and ΔG° were also calculated from adsorption data obtained at three different temperatures. Adsorption thermodynamics of uranyl ions on dried tea and coffee systems indicated spontaneous and endothermic processes. Additionally, a Lagergren pseudo-second-order kinetic model was used to fit the kinetic experimental data for both adsorbents and the constants evaluated. Dried tea and coffee wastes proved to be effective adsorbents with high capacities and significant advantage of a very low cost.     

Synthesis of phosphorus-modified poly(styrene-co-divinylbenzene) chelating resin and its adsorption properties of uranium(VI)

A new phosphorus-modified poly(styrene-co-divinylbenzene) chelating resin (PS–N–P) was synthesized by P,P-dichlorophenylphosphine oxide modified commercially available ammoniated polystyrene beads, and characterized by Fourier transform infrared spectroscopy and elemental analysis. The adsorption properties of PS–N–P toward U(VI) from aqueous solution were evaluated using batch adsorption method. The effects of the contact time, temperature, pH and initial uranium concentration on uranium(VI) uptake were investigated. The results show that the maximum adsorption capacity (97.60 mg/g) and the maximum adsorption rate (99.72 %) were observed at the pH 5.0 and 318 K with initial U(VI) concentration 100 mg/L and adsorbent dose 1 g/L. Adsorption equilibrium was achieved in approximately 4 h. Adsorption kinetics studied by pseudo second-order model stated that the adsorption was the rate-limiting step (chemisorption). U(VI) adsorption was found to barely decrease with the increase in ionic strength. Equilibrium data were best modeled by the Langmuir isotherm. The thermodynamic parameters such as ?G ₀, ?H ₀ and ?S ₀ were derived to predict the nature of adsorption. Adsorbed U(VI) ions on PS–N–P resin were desorbed effectively (about 99.39 %) by 5 % NaOH–10 % NaCl. The synthesized resin was suitable for repeated use.     

Adsorption of Cr(VI) using cellulose microsphere-based adsorbent prepared by radiation-induced grafting

Cellulose microsphere (CMS) adsorbent was prepared by radiation-induced grafting of dimethylaminoethyl methacrylate (DMAEMA) onto CMS followed by a protonation process. The FTIR spectra analysis proved that PDMAEMA was grafted successfully onto CMS. The adsorption of Cr(VI) onto the resulting adsorbent was very fast, the equilibrium adsorption could be achieved within 15 min. The adsorption capacity strongly depended on the pH of the solution, which was attributed to the change of both the existed forms of Cr(VI) and the tertiary-ammonium group of PDMAEMA grafted CMS with the pH. A maximum Cr(VI) uptake (ca. 78 mg g^?1) was obtained as the pH was in the range of 3.0–6.0. However, even in strong acid media (pH 1.3), the adsorbents still showed a Cr(VI) uptake of 30 mg g^?1. The adsorption behavior of the resultant absorbent could be described with the Langmuir mode. This adsorbent has potential application for removing heavy metal ion pollutants (e.g. Cr(VI)) from wastewater.     

Highly efficient,economic, and recyclable glutathione decorated magnetically separable nanocomposite for uranium(VI) adsorption from aqueous solution

A green and environment-friendly magnetically separable nanocomposite, glutathione@magnetite was fabricated sonochemically through the functionalization of Fe₃O₄ by glutathione which was well characterized using Fourier-transform infrared spectroscopy, ultravoilet-visible spectroscopy, scanning electron microscope, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, thermogravimetric analysis, vibrating sample magnetometer, Brunauer-Emmett-Teller, and high-resolution transmission electron microscope. The parameters affecting adsorption including pH, temperature, contact time, initial adsorbate concentration, and adsorbent amount were optimized by batch experiments. The magnetic glutathione@magnetite was applied for the removal of uranium(VI) in water with maximum adsorption capacity found to be 333.33 mg/g in 120 min at a neutral pH at 25 °C showing high efficiency for U(VI) ions. Furthermore, adsorption results obtained from UV-vis spectroscopy were validated by inductively coupled plasma optical emission spectroscopy. The thermodynamic parameters, viz Gibbs free energy (ΔGº), standard enthalpy change (ΔHº), and standard entropy change (ΔSº) of the process were calculated using the Langmuir constants. The pseudo-second-order kinetics model is seen to be applicable for describing the uptake process using a kinetics test. Moreover, desorption studies reveals that glutathione@magnetite can be used repeatedly, and removal efficiency shows only a small decrease after six cycles. Thus, glutathione@magnetite acts as a potential adsorbent for the removal of U(VI) from the water with great adsorption performance.     

Highly efficient removal of Cr(VI) from wastewater via adsorption with novel magnetic Fe3O4@C@MgAl-layered double-hydroxide

Novel magnetic Fe₃O₄@C@MgAl-layered double-hydroxide (LDH) nanoparticles have been successfully prepared by the chemical self-assembly methods. The properties of surface functional groups, crystal structure, magnetism and surface morphology of magnetic nanoparticles were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermal gravity-differential thermal gravity (TG-DTG), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The adsorption studies of the novel adsorbent in removing heavy metals Cr (VI) from waste water showed that the maximum absorption amount of Cr(VI) was 152.0 mg/g at 40℃ and pH 6.0. The excellent adsorption capacity of the Fe₃O₄@C@MgAl-LDH nano-absorbents plus their easy separation, environmentally friendly composition and reusability makes them more suitable adsorbents for the removal of metal ions from waste water.     

Highly efficient adsorbents of poly(o-phenylenediamine) solid and hollow sub-microspheres towards lead ions: a comparative study

Two kinds of different-shaped poly(o-phenylenediamine) (PoPD) polymers: solid and hollow sub-microspheres with both size of about 700 nm synthesized by a solution route without any additional directing agents, were employed as efficient adsorbents for removal of Pb(??) ions from water. Firstly, chemical structures of PoPD sub-microspheres were performed by Fourier-transform infrared (FT-IR), UV-vis, (1)H NMR spectra, X-ray diffraction (XRD) and GPC analysis. When used as adsorbents, both PoPD hollow and solid sub-microspheres showed high adsorptivity and adsorption capacity towards Pb(??) ions in water, and mechanisms of adsorption behaviors were revealed by XRD and X-ray photoelectron spectra (XPS). It was found that the pH and concentration of Pb(??) ion solution, as well as contact time and adsorbent dosage affect the degree of adsorption. Adsorption isotherms and kinetics of Pb(??) ions onto PoPD sub-microspheres were also investigated according to experimental data. Comparative investigations of adsorption behaviors revealed that hollow sub-microspheres showed enhanced adsorptivity adsorption capacity towards Pb(??) ions as compared with solid sub-microspheres typical at low adsorbent dosage. PoPD hollow sub-microspheres also showed good adsorptivity for other heavy-metal ions, such as Hg(??), Cd(??) and Cu(??), which implied their potential applications as effective adsorbents for heavy-metal ions in water.     

Pentavalent uranium oxide via reduction of [UO2]2+ under hydrothermal reaction conditions

The synthesis, crystal structure, and spectroscopic characterization of [U(V)(H2O)2(U(VI)O2)2O4(OH)](H2O)4 (1), a mixed-valent U(V)/U(VI) oxide material, are reported. The hydrothermal reaction of UO2(2+) with Zn and hydrazine at 120 degrees C for three days yields 1 in the form of a dark red crystalline solid. Compound 1 has been characterized by a combination of single-crystal and powder X-ray diffraction (XRD), elemental analysis, thermogravimetric analysis, X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS). The structure consists of an extended sheet of edge and corner shared U(VI) pentagonal bipyramids that are further connected by edge sharing to square bipyramidal U(V) units. The overall topology is similar to the mineral ianthinite. The uranium L(III)-edge XAS revealed features consistent with those observed by single-crystal X-ray diffraction. High resolution XPS data analysis of the U4f region confirmed the oxidation states of U as originally assigned from XRD analysis and bond valence summations.     

Novel graphene oxide/bentonite composite for uranium(VI) adsorption from aqueous solution

A novel graphene oxide/bentonite composite (GO/bentonite) was synthesized and then characterized through powder X-ray diffraction, fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, and energy dispersive spectroscopy. Adsorption achieved equilibrium within 10 min. Moreover, U(VI) adsorption on GO/bentonite was highly dependent on solution pH and independent of ionic strength. These characteristics suggested that inner-sphere surface complexes of U(VI) formed on GO/bentonite. The adsorption of U(VI) from aqueous solution on GO/bentonite was fitted to the pseudo-second-order and Freundlich isotherm models. The maximum sorption capacity of GO/bentonite was 234.19 mg g^?1 under neutral pH at 303 K. GO/bentonite is a potentially powerful adsorbent for the efficient removal of U(VI) from aqueous solutions.     

Adsorption modeling and mechanistic insight of hazardous chromium on para toluene sulfonic acid immobilized-polyaniline@CNTs nanocomposites

The development of highly efficient adsorbents materials for the purification of wastewater has caught a considerable deal of attention these days. Conducting polymers functionalized adsorbents has become a favorable route for enhancing their adsorption capability due to their ease of synthesis at laboratory scale. In this study, functionalized multiwalled carbon nanotube (CNT)-polyaniline (Pani) composites were fabricated using an oxidation polymerization methodology and later doped with para toluene sulfonic acid (pTSA). The CNTs provided an adequate substrate for the adhesion of Pani as well as a large surface area due to its nano size, and pTSA provided additional functionality for the adsorption of differently charged moieties through strong or weak interactions. The as-synthesized pTSA-Pani@CNT nanocomposite was analyzed by the scanning electron microscopy, transmission electron microscopy for the morphological studies and the structural analysis were done by the X-ray diffraction, and X-ray photoelectron spectroscopy (XPS). The characterization results confirmed that the Pani was adhered to the CNTs as well as its successful functionalization with pTSA. The pTSA-Pani@CNT composite was then applied to the adsorptive removal of hexavalent chromium (Cr(VI)) and the composite showed higher adsorption for Cr(VI) than pTSA-CNT and pTSA-Pani, and the maximum removal level was detected at acidic pH. The analyses of the equilibrium isotherms and adsorption kinetics were performed to elucidate the adsorption mechanism. The XPS analysis indicated that Cr(VI) was strongly bounded to the adsorbent and it further indicated that the amine, imine, and hydroxyl functional groups were involved in the adsorption process. This study presents a new insight for the fabrication of highly functional polymer-carbonaceous nanocomposites for the scavenging of heavy metals from water bodies.