Electrophoretic behavior of peptides in capillary electrophoresis influence of ionic strength and pH in aqueous-organic media.

Through correct pH, pKa and activity coefficients values, a model describing the effect of pH on electrophoretic mobility of substances has been applied to a series of peptides in water and in acetonitrile-water mixtures. The derived equations permit prediction of the optimum pH for the electrophoretic separation from only a few experimental values and they also permit determination of pKa values of analytes in the aqueous-organic media employed. Furthermore, the electrophoretic resolution between pairs of substances can be predicted, in order to evaluate electrophoretic separations of the studied peptides.     

Evaluation of chromatographic versus electrophoretic behaviour of a series of therapeutical peptide hormones

In this work, models describing the effect of pH on chromatographic and electrophoretic behaviour for a series of polyprotic therapeutic peptide hormones were compared. taking into account the species in solution and the activity coefficients. The usefulness of the proposed equations is twofold, they permit the determination of the acidity constants in water and in the hydroorganic mobile phases used in liquid chromatography (LC) and capillary electrophoresis (CE) and can also be used for the selection of the optimum pH for the separation of mixtures of the modelled compounds. The proposed relationships allow an important reduction of the experimental data needed for the development of new separation methods. The accuracy of the proposed equations is verified by modelling the chromatographic and electrophoretic behaviour of a series of polyprotic therapeutic peptide hormones. By calculating the values of predicted resolutions, selection of the optimum pH to perform LC or CE separations of their mixtures becomes a rapid and simple process.     

Prediction of electrophoretic behaviour of a series of quinolones in aqueous methanol.

Quinolones are a family of antibacterial agents used in human and veterinary clinics. The examination of protonation equilibria is essential because their antibacterial activity is pH-dependent. In this work, dissociation constants of quinolones in MeOH-water mixtures were obtained using capillary electrophoresis. The method is based on a model that relates electrophoretic mobility of the solute with pH. The effect of pH, pKa and activity coefficient on electrophoretic behaviour was considered. Standard pH values for buffer solutions were previously determined in MeOH-water mixtures, and the pH can thus be measured in these media as in water. This model is also used to obtain the optimum conditions for the separation of a series of substances because it allows one to predict the resolution between adjacent peaks from a few experimental data.     

Separation of living and dead polymers in synthetic polypeptide mixtures by nonaqueous capillary electrophoresis using differences in ionization states

The complexity in the mechanisms of polymerization of N-carboxyanhydrides requires the development of new analytical techniques able to separate mixtures of synthetic polypeptides. This work focuses on the separation of poly(N(epsilon)-trifluoroacetyl-L-lysine) (PTLL) mixtures by nonaqueous capillary electrophoresis (CE). The main goal of this work was to find electrophoretic conditions that permit the separation and the quantification of the dead polymer families that were previously identified in the samples. The influence of the pH of the electrolyte on the selectivity of the separation was carefully investigated. The mechanisms of separation of the PTTLs are discussed as a function of their ionization state. The separations obtained on a noncovalently coated capillary were compared with those obtained on a fused-silica capillary. Finally, using two different electrolytes, it is possible to quantify the three families of PTLLs, namely, the living PTLLs, the dead PTLLs with N-formyl end group and the dead PTLLs with a carboxylic end group. These results confirm the importance of CE for the separation of synthetic organic polymers in nonaqueous electrolytes.     

Effect of various modes of pressurization on the separation in capillary electrochromatography

The dissociation constants of 10 sulfonated azo dyes, six of the most common food colours used as additives (Food Yellow 4, Food Yellow 3, Food Red 9, Food Red 7, Food Red 17 and Food Blue 5), and four commonly used as textile dyes (Acid Orange 7, Acid Orange 12, Acid Red 26 and Acid Red 88), have been determined by two different systems, one by using capillary electrophoresis (CE) with diode array detection and the other by using UV-visible absorption spectrophotometry, which has been used as reference method to obtain the pKa values. The pKa values obtained by CE were determined in two ways, first on the basis of the electrophoretic mobilities (calculated from the migration times), and after we propose a new methodology, in which the dissociation constants are determined from the spectra corresponding to the maxima of electrophoretic peaks. The pKa values obtained by using these CE methods have been compared with those obtained by using the spectrophotometric method. The results show that the pKa values obtained by the CE proposed method are in general closer to the reference values than those obtained from the electrophoretic mobilities. Moreover, the proposed method retains the advantages of CE, as the possibility of working with small amounts of sample, despite its purity.     

Upconversion nanoparticle bioconjugates characterized by capillary electrophoresis

Upconversion nanoparticles (UCNPs) are an emerging class of optical materials with high potential in bioimaging due to practically no background signal and high penetration depth. Their excellent optical properties and easy surface functionalization make them perfect for conjugation with targeting ligands. In this work, capillary electrophoretic (CE) method with laser‐induced fluorescence detection was used to investigate the behavior of carboxyl‐silica‐coated UCNPs. Folic acid, targeting folate receptor overexpressed by wide variety of cancer cells, was used for illustrative purposes and assessed by CE under optimized conditions. Peptide‐mediated bioconjugation of antibodies to UCNPs was also investigated. Despite the numerous advantages of CE, this is the first time that CE was employed for characterization of UCNPs and their bioconjugates. The separation conditions were optimized including the background electrolyte concentration and pH. The optimized electrolyte was 20 mM borate buffer with pH 8.     

Immunoassay by capillary electrophoresis with quantum dots

The application of quantum dots in capillary electrophoresis immunoassay was studied for the first time. Quantum dots were conjugated with antibody and subsequently tested by electrophoretic separation of free antibody and antibody-antigen complex. Antibody was fluorescently labeled by quantum dots via conjugation procedures and its electrophoretic characteristics were effectively modified due to the attachment of quantum dots. The determination of human IgM by direct CE based immunoassay could be easily achieved by simply changing the pH value of separation buffer. Polymer additive influenced the separation too but the effect was not as significant as buffer pH adjustment. Satisfactory separation of complex from free antibody could be achieved with 20mM sodium tetraborate as separation buffer, at pH 9.8. The immunoassay application of quantum dots in CE offers considerable advantages and can be readily applied to other large bio-molecules.     

Capillary electrophoresis/electrospray ion trap mass spectrometry for the analysis of negatively charged derivatized and underivatized glycans.

The increasing interest in the development of glycoproteins for therapeutic purposes has created a greater demand for methods to characterize the sugar moieties bound to them. Traditionally, released carbohydrates are derivatized using such methods as permethylation or fluorescent tagging prior to analysis by high performance liquid chromatography (HPLC), capillary electrophoresis (CE), or direct infusion mass spectrometry. However, little research has been performed using CE with on-line mass spectrometry (MS) detection. The CE separation of neutral oligosaccharides requires the covalent attachment of a charged species for electrophoretic migration. Among charged labels which have shown promise in assisting CE and HPLC separation is the fluorophore 8-aminonaphthalene-1,3,6-trisulfonic acid (ANTS). This report describes the qualitative profiling of charged ANTS-derivatized and underivatized complex glycans by CE with on-line electrospray ion trap mass spectrometry. Several neutral standard glycans including a maltooligosaccharide ladder were derivatized with ANTS and subjected to CE/UV and CE/MS using low pH buffers consisting of citric and 6-aminocaproic acid salts. The ANTS-derivatized species were detected as negative ions, and multiple stage MS analysis provided valuable structural information. Fragment ions were easily identified, showing promise for the identification of unknowns. N-Linked glycans released from bovine fetuin were used to demonstrate the applicability of ANTS derivatization followed by CE/MS for the analysis of negatively charged glycans. Analyses were performed on both underivatized and ANTS-derivatized species, and sialylated glycans were separated and detected in both forms. The ability of the ion trap mass spectrometer to perform multiple stage analysis was exploited, with MS5 information obtained on selected glycans. This technique presents a complementary method to existing methodologies for the profiling of glycan mixtures.     

Capillary electrophoretic determination of thiosulfate,sulfide and sulfite using in-capillary derivatization with iodine

A new capillary electrophoresis (CE) method was developed for the rapid, simple and selective determination of thiosulfate, sulfide and sulfite species. The proposed method is based on the in-capillary derivatization of separated sulfur anions by mixing their zones with the iodine zone during the electrophoretic migration and direct UV detection of iodide formed. The optimal conditions for the separation and derivatization reaction were established by varying electrolyte pH, electrolyte counter-ion, concentration of iodine, and applied voltage. The optimized separations were carried out in 20 mmol/L Tris-chloride electrolyte (pH 8.5) using direct UV detection at 214 nm. All three sulfur species were well resolved in less than 4 min. The method gives repeatability comparable or even better than this obtained for sulfur anions using standard CE technique. The proposed CE system was applied to the monitoring of sulfur anions in spent fixing solutions during the electrolytic oxidation.     

Retention behaviour of peptides, quinolones, diuretics and peptide hormones in liquid chromatography. Influence of ionic strength and pH on chromatographic retention

Peptides, quinolones, diuretics and peptide hormones are important substances of biomedical interest. In this work a model describing the effect of pH on retention in liquid chromatography (LC) is established and tested for these compounds using an octadecylsilica column. The suggested model uses the pH value measured in the hydro-organic mixture used as mobile phase instead of the pH value in water and takes into account the effect of the activity coefficients. The proposed equations permit the prediction of the pH optimum using a minimum number of measurements and also permit the determination of the acidity constants of the compounds considered in the medium used as mobile phase. Moreover, these equations can be combined with the previously derived equations, that relate the retention with the solvent composition of the mobile phase, to establish a general model that relates the elution behaviour of the solute with the significant mobile phase properties: composition, pH and ionic strength.     

Analytical separation of Au/Ag core/shell nanoparticles by capillary electrophoresis

This paper demonstrates that capillary electrophoresis (CE) can be employed for characterizing the sizes of a series of Au/Ag core/shell nanoparticles (NPs). We effected the CE separation of Au/Ag core/shell NPs using a mixed buffer of sodium dodecyl sulphate (SDS) (40 mM) and 3-(cyclohexylamino)propanesulfonic acid (10 mM) at pH 9.7 and an applied voltage of 20 kV. A linear relationship (R(2)>0.99) existed between the electrophoretic mobilities and the sizes of the Au/Ag core/shell NPs within the diameter range from 25 to 90 nm; the relative standard deviations of these electrophoretic mobilities were <0.9%. From the good correlation between the results obtained by CE and those provided by scanning electron microscopy, we confirmed that this CE method is a valid one for characterizing the sizes of Au/Ag core/shell NP samples. In addition, when the Au/Ag core/shell NPs were separated through CE and detected using an on-line photodiode array detector, this approach allowed the chemical characterization of the NP species. This CE approach should allow the rapid and cost-effective characterization of a number of future nanomaterials.     

Study of the selectivity of inorganic anions in hydro-organic solvents using indirect capillary electrophoresis

In capillary electrophoresis (CE) analysis of small inorganic anions, the ability to control the electroosmotic flow (EOF) and the ability to alter the electrophoretic mobility of the ions are essential to improve resolution and separation speed. In this work, a CE method for separation of small inorganic anions using indirect detection in mixed methanol/water buffers is presented. The suitability of different UV absorbing probes commonly used for indirect detection including chromate, iodide, phthalate, benzoate, trimellitate, and pyromellitate, in mixed methanol/water buffers is examined. The effect of the electrolyte buffer system, including the pH, buffer concentration and the organic solvent on the electrophoretic mobility of the probes and analytes are also investigated. The EOF was reversed using cationic surfactant, cetyltrimethylammonium bromide (CTAB) so ions were separated under co-EOF mode. The organic solvent alters the electrophoretic mobility of the probes and the analytes differently and hence choice of the appropriate probe is essential to achieve high degree of detection sensitivity. Separations of six anions in less than 2.5 min were accomplished in buffers containing up to 30% MeOH. Adjustment of the methanol content helps to improve the selectivity and resolution of inorganic anions. Limit of detection, reproducibility and application of the method for quantification of anions in water samples will also be discussed.     

Fast and simultaneous detection of prominent natural antioxidants using analytical microsystems for capillary electrophoresis with a glassy carbon electrode: a new gateway to food environments

This paper examines for the first time the analytical possibilities of fast and simultaneous detection of prominent natural antioxidants including examples of flavonoids and vitamins using a CE microchip with electrochemical detection (ED). Unpinched injection conditions, zone electrophoretic separation and amperometric detection were carefully assayed and optimised. Analysis involved the zone electrophoretic separation of arbutin, (+)-catechin and ascorbic acid in less than 4 min using a borate buffer (pH 9.0, 50 mM), employing 2 kV as the separation voltage and +1.0 V as the detection potential. In addition, the separation of different 'couples' of natural antioxidants of food significance including (+)-catechin and ascorbic acid, (+)-catechin and rutin, as well as arbutin and phlorizdin is proposed. To demonstrate the potential and future role of CE microsystems, analytical possibilities and a new route in the raw sample analysis are presented. The preliminary results obtained allow the proposal of CE-ED microchips as a real gateway to microanalysis in foods.     

Determination of the electrophoretic mobility of bacteria and their separation by capillary zone electrophoresis

Conditions for the determination of electrophoretic mobilities of bacteria by capillary electrophoresis (CE) were explored. Most precise values are obtained using fused silica capillaries of 1–3 m length (0.25 mm inner diameter), a background buffer with an ionic strength of 0.0015 mol/L and a pH value of 7–10 at a field strength of 120 V/cm. Capillary electrophoretic separation of three different bacteria populations on the basis of their mobility differences could be realized. Electrophoretic band widths of all bacteria populations investigated are relatively large compared to molecule bands. It finds its explanation in the different distribution of surface charge density to cross-sectional area of each single cell of a population.     

Applicability of predictive models to the peptide mobility analysis by capillary electrophoresis-electrospray mass spectrometry

The prediction of peptide mobility by capillary electrophoresis (CE) coupled to electrospray mass spectrometry (MS) is studied in order to verify the validity of the semi-empirical models developed in classical CE. This work relies on the experimental determination of the electrophoretic mobilities of 68 peptides, different in charge and in size. The results indicate that the prediction is possible in CE-MS experiments, in spite of the restraints inherent in the coupling conditions. The best fit of experimental data was obtained with the Offord's model. The efficiency of the model was confirmed by the analysis of a peptide mixture in CE-MS.     

pKa values of peptides in aqueous and aqueous-organic media. Prediction of chromatographic and electrophoretic behaviour

In the present work, models describing the effect of the pH on the chromatographic and electrophoretic behaviour for polyprotic peptides were compared. The proposed models can be simultaneously used for determination of dissociation constants and selection of the optimum pH for the separation of peptides, in water and acetonitrile-water mixtures widely used in liquid chromatography and in capillary electrophoresis. The models use the pH value measured in the acetonitrile-water mixture instead of the pH value in water and take into account the effect of the activity coefficients. They permit the determination of the acidity constants in the aqueous and hydro-organic mobile phase from chromatographic retention and electrophoretic migration measurements, respectively. The values obtained by both proposed techniques agree with the potentiometric values previously determined. The suitability of the proposed models for predicting chromatographic and electrophoretic behaviour of compounds studied from a limited number of experimental data was also compared. The separation between solutes by both techniques in a complex mixture can be easily predicted, making simple and rapid pH selection to achieve optimum separation.     

Enantioseparations by using capillary electrophoretic techniques. The story of 20 and a few more years

This paper provides the author's insight on the past, present and future of performing enantioseparations using capillary electrophoretic (CE) techniques. These techniques are discussed from the historical point of view, as well as based on their potential as the separation techniques of today and the future. The overview covers mechanistic as well as practical aspects of CE techniques.     

CE characterization of semiconductor nanocrystals encapsulated with amorphous silicium dioxide

The electrophoretic mobility of silica-encapsulated semiconductor nanocrystals (quantum dots) dependent on the pH and the ionic strength of the separation electrolyte has been determined by CE. Having shown the viability of the approach, the electrophoretic mobility mu of the nanoparticles investigated is calculated for varied zeta potential zeta, particle radius r, and ionic strength I employing an approximate analytical expression presented by Ohshima (J. Colloid Interface Sci. 2001, 239, 587-590). The comparison of calculated with measured data shows that the experimental observations exactly follow what would be expected from theory. Within the parameter range investigated at fixed zeta and I there is an increase in mu with r which is a nonlinear function. This dependence of mu on size parameters can be used for the size-dependent separation of particles. Modeling of mu as function of I and zeta makes it possible to calculate the size distribution of nanoparticles from electrophoretic data (using the peak shape of the particle zone in the electropherogram) without the need for calibration provided that zeta is known with adequate accuracy. Comparison of size distributions calculated via the presented method with size histograms determined from transmission electron microscopy (TEM) micrographs reveals that there is an excellent matching of the size distribution curves obtained with the two independent methods. A comparison of calculated with measured distributions of the electrophoretic mobility showed that the observed broad bands in CE studies of colloidal nanoparticles are mainly due to electrophoretic heterogeneity resulting from the particle size distribution.     

Ultra-rapid analysis of nitrate and nitrite by capillary electrophoresis

Rapid analysis of nitrate and nitrite by capillary electrophoresis (CE) has been limited by the ions' very similar electrophoretic mobilities. With a pKa of 3.15, the mobility of nitrite can be selectively reduced using a low pH buffer in CE. A much shorter capillary can be used and separation voltages can be increased. With this method, nitrate and nitrite are separated in just over 10 s. This is roughly 20 times faster than current separation methods. Direct UV detection at 214 nm was employed and offered sub microM detection limits. Total analysis time (pre-rinse, injection, and separation) was less than 1 min, making this method ideal for high-throughput analysis.