Analysis of Cibacron blue F3G-A interaction with therapeutic proteins by MALDI-TOF mass spectrometry

The formation of the complexes between Cibacron blue F3G-A and two therapeutic proteins, recombinant human interferon-alpha2b and recombinant human growth hormone, was investigated. The method of time-resolved limited proteolysis coupled with MALDI-TOF mass spectrometry was used. The analysis of peptide maps revealed that A(17)HR(19) and L(20)HQLAFDTYQEFEEAYIPK(38) of hGH, and R(14)TLMLLAQMR(23) and D(33)RHDFGFPQEEFGNQFQK(50) of hIFN-alpha2b, exhibit affinity to Cibacron blue F3G-A. Copyright (c) 2008 John Wiley & Sons, Ltd.     

Determination of the Dissociation Constant and Stoichiometry of a Complex of the Protein Interferon α-2b with Cibacron Blue F3G-A

The nonlinear least-squares technique was used for determining the complexation parameters of the recombinant human cytokine interferon -2b with a pseudobiospecific ligand, Cibacron Blue F3G-A. The dissociation constant of the complex and the number of ligand–protein binding sites were found.     

Triazine dye binding of human alpha-fetoprotein and albumin

Column chromatography was used to investigate the interaction of human alpha-fetoprotein and albumin with different immobilized dyes. Binding of alpha-fetoprotein to the dye conjugates was studied at pH 7.0. Between 56 and 93% of the total alpha-fetoprotein applied to the column was recovered in the break-through fractions of the respective runs. Of all the dyes, Cibacron Blue F3G-A adsorbs alpha-fetoprotein most strongly. This interaction clearly depends on the degree of dye substitution of the gel. A relatively weak interaction exists between alpha-fetoprotein and immobilized Procion Red HE-3B. This is used in the purification of alpha-fetoprotein by negative chromatography resulting in a 16.6-fold enrichment of this protein. Human albumin binds tightly to immobilized Cibacron Blue F3G-A as well as to Cibacron Brilliant Blue FBR-P and shows a lower affinity to Procion Blue MX-R. Procion Red dyes, which are structurally different from Cibacron Blue F3G-A are also capable of interacting with serum albumin. The results obtained are discussed in terms of the present theoretical conceptions about dye-protein interactions.     

IMMOBILIZED CIBACRON BLUE F3G-A ON CROSSLINKED POLY (VINYL ALCOHOL) FOR AFFINITY CHROMATOGRAPHY

Immobilized triazine dye affinity chromatography has been widely used for protein purification. In this paper, cibacron Blue F3G-A was immobilized,through a spacer arm, onto a rigid hydrophilic porous polymer by reacting an epoxy-group-containing poly(vinyl alcohol) with 6-aminohexyl-N'-Cibacron Blue F3G-A,which was obtained by reacting Cibacron Blue F3G-A with excess of 1,6-diaminohexane, in a pH 8.6 buffer. The epoxy-group-containing poly(vinyl alcohol) was prepared by hydrolysis of macroporous crosslinded poly(vinyl acetate),which was synthesized by suspension copolymerization of vinyl acetate and triallyl isocyanurate in the presence of butyl acetate and n-heptane as diluents. The cibacron Blue F3G-A-immobilized poly(vinyl alcohol)was packed in a stainless steel column (250×5 mm I. D.) and the chromatographic behaviors of several proteins (cytochrome c, lysozyme, bovine serum albumin, insulin, and lactate dehydrogenase) were determined.     

A new affinity-HPLC packing for protein separation: Cibacron blue attached uniform porous poly(HEMA-<Emphasis Type="Italic">co</Emphasis>-EDM) beads

In this study, a new affinity high-performance liquid chromatography (HPLC) stationary phase suitable for protein separation was synthesized. In the first stage of the synthesis, uniform porous poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate), poly(HEMA-co-EDM), beads 6.2 μm in size were obtained. Homogeneous distribution of hydroxyl groups in the bead interior was confirmed by confocal laser scanning microscopy. The plain poly(HEMA-co-EDM) particles gave very low non-specific protein adsorption with albumin. The selected dye ligand Cibacron blue F3G-A (CB F3G-A) was covalently linked onto the beads via hydroxyl groups. In the batch experiments, albumin adsorption up to 60 mg BSA/g particles was obtained with the CB F3G-A carrying poly(HEMA-co-EDM) beads. The affinity-HPLC of selected proteins (albumin and lysozyme) was investigated in a 25 mm×4.0-mm inner diameter column packed with CB F3G-A carrying beads and both proteins were successfully resolved. By a single injection, 200 μg of protein was loaded and quantitatively eluted from the column. The protein recovery increased with increasing flow rate and salt concentration of the elution buffer and decreased with the increasing protein feed concentration. During the albumin elution, theoretical plate numbers up to 30,000 plates/m were achieved by increasing the salt concentration.     

三嗪染料修饰曲通X-100亲和分离苹果酸脱氢酶

三嗪染料(Cibacmn blue F3G-A)的蒽醌部分结构类似于腺嘌呤,可以用于亲和分离以NAD+(NADP+)和FAD为辅酶的脱氢酶.三嗪染料通过亲核取代反应修饰曲通X-100,形成的三嗪染料-曲通X-100与成相聚合物吐温80、磷酸钾盐构成液-固亲和萃取体系.从猪心肌匀浆液纯化苹果酸脱氢酶的条件:三嗪染料-曲通...     

Liquid—liquid extraction of lactate dehydrogenase from muscle using polymer-bound triazine dyes

An extract from porcine muscle containing soluble enzymes has been partitioned between the two liquid phases of an aqueous, biphasic system consisting of dextran, polyethylene glycol, and water. The influence of polymer-bound triazine dyes (Cibacron blue F3G-A and Procion yellow HE-3G) on the partition of lactate dehydrogenase and total protein was studied. The effects of pH and concentrations of polymers and buffer on this so-called affinity partitioning were also determined. The two-phase systems were used in extraction procedures for purification of lactate dehydrogenase to a specific activity of 456–494 U (7.6–8.4 μkat) per mg protein. The use of these systems for extraction of enzymes in technical scale is discussed.     

Purification of neutral protease by dye affinity chromatography

Twenty triazinic dyes were assayed as ligands for the chromatographic affinity purification of a neutral protease from Flavourzyme^™, a commercial preparation. Screening at pH 4.0 allowed the selection of eight dyes on the basis of their high protease adsorption. When the pH was set to 5.0 in order to increase selectivity, only Yellow HE-4R, Red HE-3B, and Cibacron Blue F3G-A maintained protease adsorption at high values. Neither maximum capacities nor dissociation constants calculated from isotherms measured at 8 and 25°C showed great differences. By contrast, a strong temperature effect was evidenced in the elution step: elution at 8°C allowed 70, 81, and 98% recovery of adsorbed protease with Yellow HE-4R, Red HE-3B, and Cibacron Blue F3G-A, respectively, whereas only 20% recovery was attained at 25°C. Based on the results obtained, a purification process for the neutral protease contained in Flavourzyme with Cibacron Blue F3G-A as the affinity ligand was developed, yielding 96% of electrophoretically pure enzyme in a single step, the specific activity rising from 850 to 3650 U/mg.     

Induced phase separation in low-ionic-strength cellulose nanocrystal suspensions containing high-molecular-weight blue dextrans

Spontaneous entropic phase separation phenomena occur in a wide range of systems containing highly anisotropic colloidal particles. Among these are aqueous suspensions of negatively charged cellulose I nanocrystals produced by sulfuric acid hydrolysis of native cellulose, which phase separate into isotropic and chiral nematic liquid-crystalline phases. Phase separation of an isotropic phase from a completely ordered nanocrystal suspension may be induced by the addition of salts or nonadsorbing macromolecules. In previous work (Edgar, C. D.; Gray, D. G. Macromolecules 2002, 35, 7400-7406), an isotropic phase was found to form over a period of several days when blue dextran (a sulfonated triazine dye, Cibacron blue 3G-A, covalently attached to high-molecular-weight dextran chains) was added to initially ordered suspensions. Here we report work showing that the observed phase separation was associated with the charged dye molecules attached to the dextran. The Cibacron blue 3G-A dye attached to blue dextran was found to induce greater phase separation than free (unbound) dye; at increasing ionic strength, depletion attractions due to the blue dextran increasingly contribute to the phase separation.     

Partition of purified human thyroxine-binding globulin in aqueous two-phase systems in response to reactive dyes

Thyroxine-binding globulin was isolated from pooled human serum by a two-step method involving affinity chromatography on thyroxine-Sepharose and preparative disc-electrophoresis. The final product was found to be homogeneous by polyacrylamide gel electrophoresis and has a molecular weight of 59,000. Isoelectric focusing resolved the protein into seven bands with isoelectric points ranging from 3.9 to 4.3. The isolated protein showed affinity to a number of different dyes as recognized by affinity phase partitioning. The interaction of the protein with the dye Cibacron Blue F3G-A was found to be strongly competitive with the natural ligand thyroxine.     

染料壳聚糖微球的制备及其对人血清白蛋白吸附性能研究

人血清白蛋白(Human Serum Albumin,HSA)是血浆中含量最丰富的蛋白质,约占血浆总蛋白的60%.在人体内,HSA有许多重要的生理功能[1],临床上广泛应用于手术输血和危重病人补液,治疗创伤休克、烧伤、水肿和低白蛋白血症等,而且能增强人体抵抗能力,是迄今为止产量最大、临床用量最大     

Improved hollow-fibre membranes for dye-affinity chromatography

Hollow-fibre membranes with different degrees of surface hydrophilicity were obtained by grafting mixtures of glycidyl methacrylate (GMA) and dimethyl acrylamide (DMAA) in various proportions, and Cibacron Blue F3G-A was attached to them through ammonia or glucamine spacers. Membrane hydrophilicity increased with the amount of dimethyl acrylamide in the grafted polymer. As the hydrophilicity increased the permeability decreased from 352 mL/cm2 min MPa for membranes grafted with GMA with ammonia spacer to 12.7 mL/cm2 min MPa for membranes grafted with GMA/DMAA 1/3 with glucamine spacer. Membranes grafted with GMA/DMAA 1/3 with ammonia spacer showed the best performance for BSA and lysozyme adsorption: maximum capacity was 15.3 +/- 2.2 mg BSA/mL membrane and 58.3 +/- 6.6 mg lysozyme/mL membrane while dissociation constants were 0.27 +/- 0.16 and 0.13 +/- 0.12 mg/mL, respectively. Over 80% of adsorbed proteins could be eluted with 2 M NaCl + 20% isopropanol in 20 mM sodium phosphate buffer, pH 7.0.     

Separation and quantification of the major casein fractions by reverse-phase high-performance liquid chromatography and urea-polyacrylamide gel electrophoresis. Detection of milk adulterations

A urea-formaldehyde resin (UF) continuous bed has been prepared through in-situ condensation polymerization in a confined tube. The monolith is an agglomerate of 2-microm irregular particles. Nitrogen adsorption shows that the monolith has a bimodal pore size distribution. It has low resistance to flow. A dyed monolith is obtained through modification of the UF monolith with Cibacron blue F3GA. Although its dye concentration and dynamic capacity are low compared to Sepharose type affinity media, the dyed monolith can separate some proteins in the affinity mode of liquid chromatography.     

Bead cellulose derivatives as supports for immobilization and chromatographic purification of proteins

Characteristic data are presented for Divicell, a macroporous bead cellulose with excellent flow parameters. The preparation of Divicell derivatives and their properties are described with respect to their application as chromatographic supports. The ion exchangers Divicell DEAE and Divicell CM were manufactured in two types with different exclusion limits and an available capacity for proteins of up to 100 mg/ml gel. Divicell Blue is a bead cellulose with covalently bound Cibacron Blue F3G-A and was found to be a very suitable adsorbent for the selective separation and purification of human serum albumin. Activation of Divicell with sodium periodate, epichlorohydrin and 5-norbornene-2,3-dicarboximido carbonochloridate provided activated supports used for immobilization of ligands in organic solvents and in aqueous solutions. Coupling of amines, diamines, amino acids, carbohydrates and proteins is described. The immobilized ligands retained their biological activity as determined by their specific adsorption of proteins. Divicell alkyl derivatives were tested in hydrophobic interaction chromatography with bovine serum albumin as a model. Examples are presented of the application of Divicell derivatives to the purification of biomacromolecules such as immunoglobulins and lectins by affinity chromatography. The results were comparable to those obtained using the corresponding Sepharose-derived absorbents.     

染料壳聚糖微球的制备及其对牛血清白蛋白(BSA)吸附性能的研究

采用反相悬浮交联法制备壳聚糖微球,对微球进行羟丙基氯化及氨基化,并偶联色素配体Cibacron Blue F3GA,得到一种新型染料亲和吸附剂.以牛血清白蛋白(BSA)为目标蛋白,考察了该染料亲和吸附剂的吸附性能,发现其对BSA有较高的吸附量(95.2mg/g),吸附行为满足Langmuir吸附等温式.负载牛血清白蛋白的微球容易洗脱,洗脱率高达99％.     

Affinity adsorption of recombinant human interferon-α on a porous dye-affinity adsorbent

Interferons are potent biologically active proteins synthesized and secreted by somatic cells of all mammalian species. Dye-affinity adsorption is increasingly used for protein separation. Hollow fibers have several advantages as adsorbents in comparison to conventional bead supports because they are not compressible and they eliminate internal diffusion limitations. The aim of this study was to explore in detail the performance of polyamide hollow fibers to which Cibacron Blue F3GA was attached for adsorption of recombinant interferon-α (rHuIFN-α). The hollow fiber was characterized by scanning electron microscopy. These dye-carrying hollow fibers (35.8 μmol/g) were used in the rHuIFN-α adsorption-elution studies. The effects of initial concentration of rHuIFN-α, medium pH, ionic strength and temperature on the adsorption efficiency of dye-attached hollow fibers were studied in a batch system. The non-specific adsorption of rHuIFN-α on the hollow fibers was 1.2 mg/g. Cibacron Blue F3GA attachment significantly increased the rHuIFN-α adsorption up to 99.8 mg/g. Significant amount of the adsorbed rHuIFN-α (up to 94.8%) was eluted in 1 h in the elution medium containing 1.0 M NaCl. In order to determine the effects of adsorption conditions on possible conformational changes of rHuIFN-α structure, fluorescence spectrophotometry was employed. We resulted that dye-affinity hollow fibers can be applied for rHuIFN-α adsorption without causing any significant conformational changes. Repeated adsorption/elution processes showed that these dye-attached hollow fibers are suitable for rHuIFN-α adsorption.     

High-performance anion-exchange chromatographic study of desialylated human alpha 1-acid glycoprotein variants. Development of a fractionation method for the protein slow variants

The three main desialylated variants (F1, S and A) of human alpha 1-acid glycoprotein (AAG), a serum acute-phase reactant, were analysed by high-performance anion-exchange chromatography in order to determine their optimum separation conditions. The analysis consisted of three steps, as follows: (1) A desialylated commercial AAG was separated into one "fast"- and one "slow"-migrating fraction by preparative isoelectrofocusing. The "fast" and "slow" fractions were shown to contain the F1 variant and a mixture of the S and A variants, respectively. (2) The pH titration curves of these two fractions were then measured by strong anion-exchange chromatography with several buffer systems of increasing pH. From the data obtained, it was not possible to select the optimum conditions to separate the "fast" variant F1 from the "slow" variants A and S. However, the S and A variants were shown to ionize very differently. (3) The specific fractionation of the S and A variants was therefore carried out by anion-exchange chromatography under operating conditions based on the data obtained from the study of their pH titration curves. This was performed both with the "slow"-migrating fraction obtained by preparative isoelectrofocusing of commercial AAG and with an AAG (containing only variants S and A) purified from an individual serum on immobilized Cibacron Blue F3G-A. Identification of the fractionated proteins was achieved by analytical isoelectrofocusing.     

Dye attached poly(hydroxyethyl methacrylate) cryogel for albumin depletion from human serum

Cibacron Blue F3GA was immobilized on poly(hydroxyethyl methacrylate) cryogel and it was used for selective and efficient depletion of albumin from human serum. The poly(hydroxyethyl methacrylate) was selected as the basic component because of its inertness, mechanical strength, chemical and biological stability, and biocompatibility. Cibacron Blue F3GA was covalently attached to the poly(hydroxyethyl methacrylate) cryogel to produce poly(hydroxyethyl methacrylate)-Cibacron Blue F3GA cryogel affinity column. The poly(hydroxyethyl methacrylate)-Cibacron Blue F3GA cryogel was characterized with respect to gelation yield, swelling degree, total volume of macropores, Fourier Transform Infrared spectroscopy, and scanning electron microscopy. It was found that the maximum amount of adsorption (343 mg/g of dry cryogel) obtained from experimental results is very close to the calculated Langmuir adsorption capacity (345 mg/g of dry cryogel). The maximum adsorption capacity for poly(hydroxyethyl methacrylate)-Cibacron Blue F3GA cryogel column was obtained as 950 mg/g of dry cryogel for nondiluted serum. The adsorption capacity decreased with increasing dilution ratios while the depletion ratio of albumin remained as 77% in serum sample. Finally, the poly(hydroxyethyl methacrylate)-Cibacron Blue F3GA cryogel was optimized for using in the fast protein liquid chromatography system for rapid removal of the high abundant proteins from the human serum.     

Protein purification using immobilised triazine dyes.

This review attempts to identify proteins which selectively interact with immobilised triazine dyes such as Cibacron blue F3GA and Procion red HE 3B. Different support matrices are compared by examining the capacities of these dyes for proteins. Various approaches to the immobilisation of triazine dyes are considered together with the use of spacers. Some theories of the mechanism of protein retardation by immobilised dyes are discussed. A number of methods are suggested for the measurement of dye concentrations and for the modification of the binding of proteins to dye columns. The variety of elution methods is compared with a view to optimizing purifications. The scope of applications is reviewed as well as the choice of dye. Some advantages of triazine dyes over other affinity ligands are given. It is concluded that although no satisfactory mechanism for the binding of triazine dyes to proteins has yet been proposed, these dyes possess considerable potential for protein purification, particularly when applied on the large scale.     

Human liver dihydrodiol dehydrogenase 1-catalyzed reaction generating 9alpha,11beta-prostaglandin F2 from prostaglandin D2 followed by micellar electrokinetic chromatography

An enzyme reaction converting prostaglandin D2 (PGD2) into 9alpha,11beta-prostaglandin F2 (9alpha,11beta-PGF2) by a human liver-originated recombinant dihydrodiol dehydrogenase 1 (DD1) has been studied using CE. Four prostaglandins, viz. PGD2, 9alpha,11beta-PGF2, PGE2, and PGF2a (see Fig. 1, the latter two major PGs are possibly coexisting compounds in the assay mixtures), were completely separated by using SDS or PEG as buffer additives. Because analysis times in the SDS system were shorter than in the PEG system, SDS was employed in measurements of the enzyme activity of DD1. The pH dependence and the reaction temperature dependence of enzyme activity have been studied. The present method enabled us to detect all of the participants in the enzyme reaction: PGD2, 9alpha,11beta-PGF2, nicotinamide adenine dinucleotide phosphate (NADPH), and NADP+. Thus, direct, comprehensive, and reliable analysis of the enzyme reaction becomes possible. Enzyme activity has hitherto been estimated indirectly from the decrease of fluorescence derived from NADPH as an index of progress of the enzyme reactions in batch methods employed in conventional studies. In addition, the low sample consumption characteristic of CE should be a significant advantage of the present method in characterization of less commonly available enzymes such as the recombinant species used in this work.