This review (with 79 references) summarizes the recent work on the development of chemical sensors and biosensors based on the use of composites made from conducting polymers (CPs) and graphene. Owing to the unique electrical, mechanical, optical, chemical and structural properties of CP and graphene, these kinds of composites have generated increasing interest in senor field. In this review, we first discuss methods for preparation of CP/GE composites by chemical, electrochemical, or physical methods including electrostatic interactions. We then cover aspects of the fabrication of modified electrodes and the performance of respective sensors with electrochemical, electronic or optical signal transduction. We then discuss sensors for the determination of inorganic and organic species, gases and vapors. We also review the state of the art in respective biosensors for hydrogen peroxide and glucose, for oligomers (DNA, RNA, and aptamers), for biogenic amines, NAD^+/NADH, cytochromes and the like, and in immunosensors. Finally, the perspective and current challenges of CP/GE composites for use in (bio)sensors are outlooked.
Figure
Conducting polymer composites with graphene have attracted increasing research interest in the modified electrodes for the application in chemical sensors and biosensors, due to the unique intrinsic properties of each component. 相似文献
Gold nanorods (AuNRs) show high potential in electrochemical sensing owing to their excellent conductivity, electrocatalytic activity, selectivity and sensitivity. This review (with 99 refs.) summarizes the performance of AuNR-based electrochemical sensors based on the use of advanced nanocomposites. Following an introduction into the fields of biosensors and nanomaterials, the article summarizes the advantages and limitations of conventional analytical methods. A third section overviews the methods for preparation and characterization of AuNRs and nanocomposites including bimetallic nanorods, gold-metal oxide, gold-carbon nanotubes, gold-polymer, gold-graphene, gold-CNT and gold-enzymes conjugates. Their electrochemistry is treated next, with aspects related to the effects of rod size and shape, of thiol coatings on voltammetric signals, and on the behavior of 1-D AuNRs and respective arrays. Section 5 gives examples for non-enzymatic sensors for simple biomolecules, with subsections on sensors for hydrogen peroxide, nitric oxide, glucose, dopamine, NAD/NADH, cysteine, and some drugs. Section 6 covers enzyme-based sensors, with examples on sensors using peroxidases, oxidases and the like. The next sections cover DNA biosensors (such as for DNA biomarkers) and immunosensors, mainly for tumor markers. Possibilities for improving sensor performance are presented at the end of the review.
Nanocomposites consisting of gold nanoclusters and graphene oxide (AuNC/GO) were prepared and investigated with respect to the design of new sensors for hydrogen peroxide (H2O2). The AuNC/GO hybrid nanomaterials were deposited on a gold electrode by the layer-by-layer assembly method, where they showed enhanced photoelectrical and sensing properties. The presence of graphene oxide improves the photoinduced electron separation efficiency of the AuNCs, as well as the catalytic effect of AuNCs on the electroreduction of H2O2. Compared to an electrode modified with AuNCs only, the new electrodes display a more than ten-fold enhanced photocurrent at a working voltage of -500 mV (vs. Ag/AgCl), higher sensitivity for H2O2 (25.76 nA?mM?1), lower LOD (2 μM) and extended linear range (from 30 μM to 5 mM). The sensors were applied to the determination of H2O2 extracted from living human umbilical vein endothelial cells stimulated by angiotensin II.
Graphical abstract Graphene oxide (GO) not only improves the photoinduced charge separation efficiency of fluorescent gold nanoclusters (AuNCs) based photoelectrochemical sensors, but also enhances the catalytic property of AuNCs on the detection of hydrogen peroxide (H2O2).
This review (with 340 refs) focuses on methods for specific and sensitive detection of metabolites for diagnostic purposes, with particular emphasis on electrochemical nanomaterial-based sensors. It also covers novel candidate metabolites as potential biomarkers for diseases such as neurodegenerative diseases, autism spectrum disorder and hepatitis. Following an introduction into the field of metabolic biomarkers, a first major section classifies electrochemical biosensors according to the bioreceptor type (enzymatic, immuno, apta and peptide based sensors). A next section covers applications of nanomaterials in electrochemical biosensing (with subsections on the classification of nanomaterials, electrochemical approaches for signal generation and amplification using nanomaterials, and on nanomaterials as tags). A next large sections treats candidate metabolic biomarkers for diagnosis of diseases (in the context with metabolomics), with subsections on biomarkers for neurodegenerative diseases, autism spectrum disorder and hepatitis. The Conclusion addresses current challenges and future perspectives.
Graphical abstract This review focuses on the recent developments in electrochemical biosensors based on the use of nanomaterials for the detection of metabolic biomarkers. It covers the critical metabolites for some diseases such as neurodegenerative diseases, autism spectrum disorder and hepatitis.
Screening serum for the presence of prostate specific antigen (PSA) belongs to the most common approach for the detection of prostate cancer. This review (with 156 refs.) addresses recent developments in PSA detection based on the use of various kinds of nanomaterials. It starts with an introduction into the field, the significance of testing for PSA, and on current limitations. A first main section treats electrochemical biosensors for PSA, with subsections on methods based on the use of gold electrodes, graphene or graphene-oxide, carbon nanotubes, hybrid nanoparticles, and other types of nanoparticles. It also covers electrochemical methods based on the enzyme-like activity of PSA, on DNA-, aptamer- and biofuel cell-based methods, and on the detection of PSA via its glycan part. The next main section covers optical biosensors, with subsections on methods making use of surface plasmon resonance (SPR), localized SPR and plasmonic ELISA-like schemes. This is followed by subsections on methods based on the use of fiber optics, fluorescence, chemiluminescence, Raman scattering and SERS, electrochemiluminescence and cantilever-based methods. The most sensitive biosensors are the electrochemical ones, with lowest limits of detection (down to attomolar concentrations), followed by mass cantilever sensing and electrochemilumenescent strategies. Optical biosensors show lower performance, but are still more sensitive compared to standard ELISA. The most commonly applied nanomaterials are metal and carbon-based ones and their hybrid composites used for different amplification strategies. The most attractive sensing schemes are summarized in a Table. The review ends with a section on conclusions and perspectives.
Graphical abstract Schematic representation of nanostructure-based biosensors for detection of prostate specific antigen using various detection schemes and biorecognition elements such as antibodies (Abs), aptamers (APT), lectins (LEC), and molecularly imprinted polymers (MIP).
Various kinds of nanomaterials have been described in recent years that represent stable and low-cost alternatives to biomolecules (such as enzymes) for use in (bio)analytical methods. The materials typically include, metal/metal oxides, metal complexes, nanocomposites, porphyrins, phthalocyanines, smart polymers, and carbonaceous nanomaterials. Due to their biomimetic and other properties, such nano-materials may replace natural enzymes in chemical sensors, biosensors, and in various kinds of bioassays. This overview (with 252 references) highlights the analytical potential of such nanomaterials. It is divided into sections on (a) the types of nanomaterials according to their intrinsic nature, (b) non-enzymatic sensor designs (including electrochemical, colorimetric, fluorescent and chemiluminescent methods), and (c), applications of non-enzymatic sensors in the biomedical, environmental and food analysis fields. We finally address current challenges and future directions.
Graphical abstract This review discusses different types of nanomaterials, which are explored as a potential biomimetic material to replace the natural enzyme in the field of biosensors, and have found widespread applications in biomedical, food and environmental analysis.
The authors report on an efficient method for the voltammetric sensing of dopamine (DA) by using an electrode modified with alternating monolayers of graphene oxide (GO) and Titanium dioxide (TiO2) nanoparticles anchored GO nanosheets (NSs)). The as-prepared nanostructures were characterized by photoluminescence spectroscopy, powder X-ray diffraction, Raman spectroscopy, FT-IR spectroscopy, transmission electron microscopy, scanning electron microscopy, atomic force microscopy and Energy Dispersive X-ray Analysis (EDAX) techniques. The GO/TiO2 nanocomposite (NC) was deposited on a glassy carbon electrode (GCE), where it displayed an excellent electrocatalytic activity toward the oxidation of DA, owing to its excellent conductivity, high specific surface area, enhanced interfacial contact and more negative zeta potential. Figures of merit include (a) a fast response (5 s), (b) a wide linear range (between 0.2 and 10 μM of DA) (c) a particularly low detection limit (27 nM), (d) a working potential as low as 0.25 V (vs. Ag/AgCl) and (e) a sensitivity of 1.549 μA·μM?1·cm?2. The GO/TiO2/GCE exhibited excellent selectivity over the other interferences as revealed by the differential pulse voltammetric and amperometric studies. The analysis of spiked urine samples resulted in recoveries in the range of 96 to 106%, with RSDs between 3.8 and 5.2%.
Graphical abstract A GO/TiO2 (graphene oxide/titanium dioxide) nanocomposite (NC) was prepared and exploited as electrochemical probes in DA detection. It displays a low detection limit, wide linear range and excellent selectivity.
The authors describe a fluorometric aptamer based assay for adenosine triphosphate (ATP). It is based on the use of carbon dots (CDs) and graphene oxide (GO). The resultant CD-aptamer is adsorbed on the surface of GO via π-stacking and hydrophobic interaction, and the fluorescence of CD-aptamer is quenched via fluorescence resonance energy transfer (FRET) between CDs and GO. If ATP is present, it will bind to the aptamer and the CD-aptamer will be desorbed from GO. This will suppress FRET and the fluorescence of the CDs is restored. Under the optimal conditions and at typical excitation/emission wavelengths of 358/455 nm, the assay has a 80 pM detection limit and a linear range that extends from 0.10 to 5.0 nM concentrations of ATP. The method was successfully applied to the determination of ATP in yogurt samples. This method can also be conceivably applied to the detection of other analytes for which appropriate aptamers are available.
Graphical abstract Schematic of a novel fluorometric ATP assay based on the fluorescence resonance energy transfer (FRET) between aptamer modified carbon dots (CD-aptamer) and graphene oxide (GO). CD-aptamer was used as the energy donor and molecular recognition probe, and GO acted as energy acceptor. This assay exhibits high sensitivity and selectivity with a detection limit as low as 80 pM.
Novel nanocomposites were prepared from graphene oxide (GO) and octahedral tin dioxide (SnO2) through a facile process that included synthesis of octahedral SnO2 and the reduction of GO with ascorbic acid. The morphology and structure of the nanocomposites were characterized by UV–vis spectroscopy, transmission electron microscopy, and Raman spectroscopy. The nanocomposites were placed on a glassy carbon electrode where they displayed excellent performance in terms of differential pulse voltammetric determination of dopamine (DA). This is attributed to (a) the synergetic interactions between reduced graphene oxide (r-GO) and octahedral SnO2, and (b) the presence of a large number of active sites on the nanocomposites surface. The sensor responds to DA in the concentration range of 0.08 to 30 μM, with a 6 nM detection limit if operated at 0.24 V (vs. Ag/AgCl). The modified electrode also widely suppresses the background current resulting from excess ascorbic acid and uric acids. The method was applied to the determination of DA in spiked human urine and gave satisfactory results, with recoveries in the range from 96.4 to 98.2 %.
Green and facile synthesis of reduced graphene oxide-octahedral SnO2 (r-GO-SnO2) nanocomposites for the sensitive and selective electrochemical detection of dopamine.
Cardiac troponin (cTn) is a specific and sensitive biomarker for diagnosis of myocardial injury. Hence, numerous kinds of biosensors for cTn have been reported. Electrochemical methods possess inherent advantages over other kinds of sensors because they are specific, sensitive, and simple. By combining the advantages of electrochemical biosensors with those of nanomaterials, some interesting electrochemical biosensor for cTn can be obtained where the nanomaterials trigger substantial signal amplification. This review (with 101 refs.) summarizes the state of the art in electrochemical biosensing of cTn based on the use of nanomaterials. Following an introduction into the field, the use of nanomaterials in electrochemical sensing is briefly discussed. A next section covers strategies for signal amplification by using nanomaterials, with subsections on the use of nanowires, nanotubes, graphenes, and various other nanoparticles. The article concludes with a discussion of the prospects of nanomaterial-based signal amplification and on future research directions.
Graphical abstract Illustration of electrochemical biosensing of cardiac troponin (cTn) with various kinds of nanomaterials, including nanowires, nanotubes, graphene and nanoparticles, as the signal amplification modules.
This review (with 110 refs.) gives an overview on the progress that has been made in the past few years on the use of gold nanoparticles (AuNPs) for use in sensors and analytical tools for the determination of dopamine (DA). Both AuNPs and their composites with other organic and inorganic materials including noble metals are treated. Following an overview on the clinical significance of DA, we discuss the various analytical methods that are (a) electrochemiluminescence (ECL); (b) surface enhanced Raman scattering (SERS); (c) colorimetric probing and visual detection; and (d) the large class of electrochemical sensors. Subsections cover sensors based on plain AuNPs, bimetallic NPs, AuNP-metal@metal oxide nanocomposites, AuNP nanocomposites with organic polymers, AuNP nanocomposites with carbon nanotubes or with graphene, and finally sensors based on ternary materials containing AuNPs. The review ends with a conclusion on current challenges of sensors for DA and an outlook on future trends.
We review the recent progress in sensing dopamine based on AuNPs and its nanocomposites including bimetallic nanoparticles, AuNPs-/metal oxide, AuNPs-polymer, AuNPs-carbon nanotubes, AuNPs-graphene and ternary materials using different types of sensing techniques such as electrochemiluminescence (ECL), colorimetric, surface enhanced Raman scattering (SERS) and electrochemical techniques.
We report on a widely applicable approach for protein detection by using triple-helix DNA mediated CuInS2 quantum dot (QD) and graphene oxide (GO) nanocomposite. The CuInS2 QDs were coated with mercaptopropionic acid and then covalently linked to a hairpin aptamer against lysozyme (HLA). Single-stranded DNA (triple helix-forming oligonucleotide; THFO) readily absorbs on the surface of GO via π-stacking interaction, and this results in the formation of THFO-GO. If HLA-CuInS2 QDs are added to the THFO-GO system, the fluorescence of HLA-CuInS2 QDs (at excitation/emission wavelengths of 590/665 nm) is quenched. Lysozyme has a higher affinity for HLA than THFO. Therefore, in the presence of lysozyme, it will bind to the HLA-CuInS2 QD and displace the THFO-GO. This results in the restoration of fluorescence that is related to the concentration of lysozyme. The fluorescence of the QDs is turned on. The calibration plot is linear in the 0.01 to 1.8 ng·mL￣1 concentration range, with a 3 pg·mL￣1 detection limit (at a signal-to-noise ratio of 3). The method was also applied to study the inhibition of lysozyme by IvyEc. In our perception, this method has a wide scope in that it may become applicable to any protein for which an appropriate aptamer is available.
Graphical abstract A novel convenient and universal fluorescence nanoprobe for sensitive and selective detection of lysozyme and inhibitor screening was established using triple-helix DNA mediated CuInS2 QDs and GO nanocomposites
A multiplexed graphene oxide (GO) fluorescent nanoprobe is described for quantification and imaging of messenger RNAs (mRNAs) in living cells. The recognizing oligonucleotides (with sequences complementary to those of target mRNAs) were labeled with different fluorescent dyes. If adsorbed on GO, the fluorescence of the recognizing oligonucleotides is quenched. After having penetrated living cells, the oligonucleotides bind to target mRNAs and dissociate from GO. This leads to the recovery of fluorescence. Using different fluorescent dyes, various intracellular mRNAs can be simultaneously imaged and quantified by a high content analysis within a short period of time. Actin mRNA acts as the internal control. This GO-based nanoprobe allows mRNA mimics to be determined within an analytical range from 1 to 400 nM and a detection limit as low as 0.26 nM. Up to 3 intracellular mRNAs (C-myc, TK1, and actin) can be detected simultaneously in a single living cell. Hence, this nanoprobe enables specific distinction of intracellular mRNA expression levels in cancerous and normal cells. It can be potentially applied as a tool for detection of cancer progression and diagnosis.
Graphical abstract A multiplexed graphene oxide (GO)-based fluorescent nanoprobe is described for quantification and imaging of intracellular messenger RNAs. After penetrating living cells, the recovered fluorescence of the dissociated recognizing oligonucleotides can be analyzed , and this allows for simultaneous detection of up to 3 intracellular messenger RNAs.
A composite was prepared from a Co(II)-based zeolitic imidazolate framework (ZIF-67) and graphene oxide (GO) by an in situ growth method. The material was electrodeposited on a glassy carbon electrode (GCE). The modified GCE was used for the simultaneous voltammetric determination of dopamine (DA) and uric acid (UA), typically at working potentials of 0.11 and 0.25 V (vs. SCE). The morphology and structure of the nanocomposite were characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy and X-ray diffraction. The modified electrode exhibits excellent electroanalytical performance for DA and UA owing to the synergistic effect of the high electrical conductivity of GO and the porosity of ZIF-67. By applying differential pulse voltammetry, a linear response is found for DA in the 0.2 to 80 μM concentration range, and for UA between 0.8 and 200 μM, with detection limits of 50 and 100 nM (at S/N =?3), respectively. Further studies were performed on the effect of potential interferents, and on electrode stability and reproducibility. The modified GCE was applied to the simultaneous detection of DA and UA in spiked human urine and gave satisfying recoveries.
Graphical abstract Schematic of the preparation procedure of GO-ZIF67 and electrochemical reaction mechanisms of UA and DA at the GO-ZIF67-modified glassy carbon electrode (GCE). GO: graphene oxide; ZIF-67: Co(II)-based zeolitic imidazolate framework.
The article reports an aptamer based assay for cocaine by employing graphene oxide and exonuclease III-assisted signal amplification. It is based on the following scheme and experimental steps: (1) Exo III can digest dsDNA with blunt or recessed 3-terminus, but it has limited activity to ssDNA or dsDNA with protruding 3-terminus; (2) GO can absorb the FAM-labeled ssDNA probe and quench the fluorescence of probe, while the affinity between FAM-labeled mononucleotide and GO is negligible; (3) Cocaine aptamer can be split into two flexible ssDNA pieces (Probe 1 and Probe 2) without significant perturbation of cocaine-binding abilities; (4) The triple complex consisting of Probe 1, Probe 2 and cocaine can be digested by Exo III with the similar efficiency as normal dsDNA. Cocaine aptamer is split into two flexible ssDNA pieces (Probe 2 and 3′-FAM-labeled Probe 1). Cocaine can mediate the cocaine aptamer fragments forming a triplex. The triple complex has unique characteristic with 3′-FAM-labeled blunt end at the Probe 1 and 3′-overhang end at Probe 2. If exonuclease III is added, it will catalyze the stepwise removal of fluorescein (FAM) labeled mononucleotides from the 3-hydroxy termini of the special triplex complex, resulting in liberation of cocaine. The cocaine released in this step can produce a new cleavage cycle, thereby leading to target recycling. Through such a cyclic bound-hydrolysis process, small amounts of cocaine can induce the cleavage of a large number of FAM-labeled probe 1. The cleaved FAM-labeled mononucleotides are not adsorbed on the surface of graphene oxide (GO), so a strong fluorescence signal enhancement is observed as the cocaine triggers enzymatic digestion. Under optimized conditions, the assay allows cocaine to be detected in the 1 to 500 nM concentration range with a detection limit of 0.1 nM. The method was applied to the determination of cocaine in spiked human plasma, with recoveries ranging from 92.0 to 111.8 % and RSD of <12.8 %.
A glassy carbon electrode (GCE) was anodically oxidized by cyclic voltammetry (CV) in 0.05 M sulfuric acid to introduce hydroxy groups on its surface (GCEox). Next, an imidazolium alkoxysilane (ImAS) is covalently tethered to the surface of the GCEox via silane chemistry. This electrode is further modified with graphene oxide (GO) which, dispersed in water, spontaneously assembles on the electrode surface through electrostatic interaction and π-interaction to give an electrode of type GO/ImAS/GCE. Electroreduction of GO and GCEox by CV yields electroreduced GO (erGO) and an electrode of the type erGO/ImAS/GCE. This electrode displays excellent electrocatalytic activity for the oxidation of ascorbic acid (AA), dopamine (DA) and uric acid (UA). Three fully resolved anodic peaks (at ?50 mV, 150 mV and 280 mV vs. Ag/AgCl) are observed during differential pulse voltammetry (DPV). Under optimized conditions, the linear detection ranges are from 30 to 2000 μM for AA, from 20 to 490 μM for UA, and from 0.1 to 5 μM and from 5 μM to 200 μM (two linear ranges) for DA. The respective limits of detection (for an S/N of 3) are 10 μM, 5 μM and 0.03 μM. The GCE modified with erGO and ImAS performs better than a bare GCE or a GCE modified with ImAS only, and also outperforms many other reported electrodes for the three analytes. The method was successfully applied to simultaneous analysis of AA, DA and UA in spiked human urine.
Graphical abstract Differential pulse voltammetric simultaneous determination of ascorbic acid, dopamine and uric acid is achieved on a glassy carbon electrode modified with electroreduced graphene oxide and imidazolium groups, through anodic treatment of glassy carbon and silane chemistry.
Nanosized carbon materials are offering great opportunities in various areas of nanotechnology. Carbon nanotubes and graphene, due to their unique mechanical, electronic, chemical, optical and electrochemical properties, represent the most interesting building blocks in various applications where analytical chemistry is of special importance. The possibility of conjugating carbon nanomaterials with biomolecules has received particular attention with respect to the design of chemical sensors and biosensors. This review describes the trends in this field as reported in the last 6?years in (bio)analytical chemistry in general, and in biosensing in particular.
Figure
Carbon nanotubes and graphene in analytical applications 相似文献
In this study, the graphene oxide/poly(N-isopropylacrylamide) nanocomposite modified with 2-mercaptoethanol (GO/MPNIPAM) was synthesized in three stages. N-Isopropylacrylamide polymerization was firstly performed in the presence of azobisisobutyronitrile as an initiator, which was discovered by Homer, and 2-mercaptoethanol as a modifier. Then, the graphene oxide/modified polymer nanocomposite was synthesized by the covalent interactions between carboxylic acids of the graphene oxide and hydroxyl groups of the modified polymer during the esterification reaction. The GO/MPNIPAM nanocomposite includes some percentage of the polymer that improves solubility and stability of the GO sheets in physiological applications; due to the interaction between the MPNIPAM and the modified GO polymer, a bridge-like connection is formed between the GO sheets and the process that leads to remove a large number of hydrophilic groups on the GO nanocomposite and therefore, the GO/MPNIPAM is well dissolved in organic solvents. This property is beneficial for anti-cancer drug delivery as well as π–π interactions between the nanocomposite and aromatic drugs. The nanocomposite is not a toxic material for human body at all and has high capacity for drug delivery. Structure and morphology of the nanocomposite were studied by FTIR, SEM, XRD, UV, TGA and Raman analysis. The analysis done by X-ray diffraction pattern confirmed the presence of graphene oxide in nanocomposites and improved crystalline polymer in nanocomposites. 相似文献
A hybrid material consisting of bulk-reduced TiO2, graphene oxide (GO) and polyaniline (PANI) was fabricated by decorating TiO2 with GO, followed by in-situ oxidative chemical polymerization of aniline. The TiO2 nanoparticles (NPs) with thermally stable bulk reduction states were initially prepared from porous amorphous titanium as the precursor. The TiO2 NPs and GO were chemically conjugated to each other via amide bonds to improve the stability of the composite. The sensor, if operated in the conductivity mode, exhibits strong signal changes, and fast response and recovery times (of 32 and 17 s, respectively) to gaseous ammonia even at room temperature. Its response range extends from 5 to 300 ppm, and the lower detection limit is 5 ppm. The sensor is fairly selective and not interfered by gases such as CO, CH4, and trimethylamine, and by vapors of methanol and ethanol. It also displays good temporal stability. This is attributed to the bulk-reduced state of TiO2, the presence of oxygen functional groups on GO, and the strong adsorption and rapid diffusion of ammonia. The results also imply the presence of a synergetic effect between TiO2 and GO/PANI, which is probably beneficial for the potential application of the resulting composite as a gas sensor.
Graphical abstract A hybrid material consisting of bulk-reduced TiO2, graphene oxide (GO) and polyaniline (PANI) was fabricated by decorating TiO2 with GO, followed by in-situ oxidative chemical polymerization of aniline. The TiO2/GO/PANI sensor exhibits strong signal changes, fast response time (32 s) and recovery time (17 s) to ammonia at room temperature. It also displays good selectivity and temporal stability.
The authors describe a method for synthesizing graphene oxide quantum dots (GOQDs) possessing orange fluorescence with emission wavelength that can be tuned over the range from 537 to 593 nm by variation of the excitation wavelength. The GOQD display peroxidase-mimicking catalytic activity. Specifically, they catalyze the oxidation of dopamine to produce 4-(2-aminoethyl)benzene-1,2-quinone (AQ) which is colored and can quench the fluorescence of GOQDs. However, quenching is reversed by addition of NADP+, but not by its reduced form (NADPH). Based on these findings, an assay was worked out to monitor enzymatic reactions involving NADP+. The method allows NADPH to be detected in the 2–175 μM concentration range, with a 0.6 μM detection limit.
Graphical abstract Schematic of a top-down method for synthesizing fluorescent graphene oxide quantum dots (GOQD) by chemical degrading, exfoliation and self-assembly of graphene oxide (GO). The GOQDs display peroxidase-like activity and can oxidize dopamine to form a colored quinone that quenches the fluorescence of the GOQDs. The quenching efficiency is reduced, however, in the presence of NADP+.
