Characterization of a 2‐Benzo[c]cinnoline Modified Glassy Carbon Electrode by Raman Spectroscopy,Electrochemical Impedance Spectroscopy,and Ellipsometry

This work describes the characterization of the grafted 2‐benzo[c]cinnoline (2BCC) molecules at a glassy carbon (GC) electrode surface by voltammetry and spectroscopy. Attachment of the molecule to the carbon substrate was achieved by the electrochemical reduction of 2‐benzo[c]cinnoline diazonium salt (2BCC‐DAS). GC electrode modification was carried out in aprotic solution with 2BCC diazonium salt. Dopamine (DA) and ascorbic acid (AA) were used to prove the surface modification to see the blockage of the electron transfer. The presence of 2BCC at the GC electrode surface was characterized by cyclic voltammetry and Raman spectroscopy. Raman spectroscopy was used to monitor molecular bound properties of the adsorbates at the 2BCC‐GC surface and confirm the attachment of 2BCC molecules onto the GC surface. The thickness of the 2BCC film on GC was also investigated by ellipsometric measurement.     

An electrochemical biosensor for direct detection of DNA using polystyrene-g-soya oil-g-imidazole graft copolymer

A label-free electrochemical DNA biosensor was developed through the attachment of polystyrene-g-soya oil-g-imidazole graft copolymer (PS-PSyIm) onto modified graphene oxide (GO) electrodeposited on glassy carbon electrode (GC). GC/GO electrode was initially functionalised via electrochemical reduction of 4-nitrobenzene diazonium salt, followed by the electrochemical reduction of NO₂ to NH₂. Subsequent to the electrochemical deposition of gold nanoparticles on modified surface, the attachment of the PS-PSyIm graft copolymer on the resulting electrode was achieved. The interaction of PS-PSyIm with DNA at the bare glassy carbon electrode was studied by cyclic voltammetry technique, and it was found that interaction predominantly takes place through intercalation mode. The selectivity of developed DNA biosensor was also explored by DPV on the basis of considering hybridisation event with non-complementary, one-base mismatched DNA and complementary target DNA sequence. Large decrease in the peak current was found upon the addition of complementary target DNA. The sensitivity of the developed DNA biosensor was also investigated, and detection limit was found to be 1.20 nmol L^?1.     

Electrocatalytic Reduction of Oxygen at Glassy Carbon Electrodes Coated with Diazonium‐derived Porphyrin/Metalloporphyrin Films

In this study, the influence of the film structure was investigated on the electrocatalytic oxygen reduction at GC electrodes covered with porphyrin and metalloporphyrin rings via the diazonium modification method. For that purpose, primarily, tetraphenylporphyrin (TPP) films on GC electrode surfaces were prepared by electroreduction of in situ generated diazonium salts of 5‐(4‐aminophenyl)‐10,15,20‐triphenylporphyrin (APP) and 5,10,15,20‐tetrakis(4‐aminophenyl)porphyrin (TAPP) molecules. Next, the formation of metalloporphyrin films on the modified surfaces was accomplished through the complexation reactions of surface porphyrin rings with metal ions in the salt solutions containing Mn(II), Fe(III) and Co(II) ions. The resulting porphyrin and metalloporphyrin layers were identified with XPS and ICP‐MS. The electrochemical barrier properties of the films on GC surfaces were examined by cyclic voltammetry in K₃Fe(CN)₆ aqueous solution. The electrocatalytic abilities of the resulting films were also investigated for the oxygen electrochemical reduction by employing cyclic voltammetry in PBS solutions saturated with oxygen. The results showed that the oxygen reduction potentials on modified GC electrodes were shifted to less negative potentials compared to that of bare GC electrode. Also, it was obtained that the oxygen reduction reaction was more effective on the GC electrodes modified with TPP rings by using TAPP molecules than those prepared by using APP molecules.     

Synthesis and characterization of 1,3-diarylbenzo[c]selenophenes

A series of 1,3-diarylbenzo[c]selenophenes (symmetrical/unsymmetrical) have been synthesized involving a selenium transfer reaction of keto-alcohol/benzo[c]furan using Woollins reagent. The optical and electrochemical studies of these diarylbenzo[c]selenophenes are correlated with their structures.     

Electrochemical and impedance spectroscopy studies of various diazonium salts on a glassy carbon electrode

Abstract  

The derivatization of a glassy carbon electrode surface was achieved with and without electrochemical reduction of various diazonium salts in acetonitrile solutions. The surfaces were characterized, before and after their attachment, by cyclic voltammetry and electrochemical impedance spectroscopy to evidence the formation of a coating on the carbon surface. The results were indicative of the presence of substituted phenyl groups on the investigated surface. Also, the effects of diazonium thin films at the surface of a glassy carbon electrode, modification time, and salt concentration on their electrochemical responses in the presence of the Fe(CN)₆^3−/4− probe were investigated. Electrochemical impedance measurements indicated that the kinetics of electron transfer is slowed down when the time and the concentration used to modify the glassy carbon electrode are increased. We therefore modified a glassy carbon surface via its derivatization with and without electrochemical reduction of various diazonium salts in acetonitrile solution.     

Electrochemical Reduction of a Conjugated Cinnamic Acid Diazonium Salt as an Immobilization Matrix for Glucose Biosensor

Initial results on the synthesis of a new conjugated diazonium salt of trans‐4‐cinnamic acid diazonium fluoroborate, which is used for the chemical modification of the glassy carbon (GC) electrode with trans‐4‐cinnamic acid groups through electrochemical reduction, and direct covalent immobilization of glucose oxidase (GOD) on the cinnamic acid groups are presented. The chemically modified GC electrode exhibits a good selectivity relative to the bare GC electrode for the various possible interfering compounds in glucose analysis: namely ascorbic acid and 4‐acetamidophenol. Covalent immobilization of GOD on the chemically modified GC electrode produces a biosensor which responds to glucose concentration changes in the presence of a soluble redox mediator (ferrocenemethanol). The chemical modification of GC by cinnamic acid groups is potentially useful for the attachment of other enzymes and biochemical reagents.     

Synthesis and characterization of benzo[c]thiophene analogs incorporating benzo[b]thiophene/1-hexylindole/benzo[b]furan

Synthesis of 1,3-disubstituted benzo[c]thiophene analogs incorporating heterocycles such as benzo[b]thiophene/1-hexylindole/benzo[b]furan and thiophene units is described. Optical and electrochemical studies of the benzo[c]thiophene analogs are also reported.     

Synthesis of some azacrown derivatives and fabrication of their nanofilms on the glassy carbon surface

The modification of N-phenyl-aza-15-crown-5 (PA15C5) and N-(4-aminophenyl)-aza-15-crown-5 (4APA15C5) on glassy carbon (GC) electrode was performed by the electrochemical oxidation of the corresponding azacrown derivatives in anhydrous acetonitrile media. The electrochemical behavior of the resulting modified GC electrode was investigated in the presence of electroactive redox probes and these results, together with the X-ray photoelectron spectroscopy (XPS) and reflection-absorption infrared spectroscopy were used to confirm the attachment of these molecules onto the GC surface. The ellipsometric thicknesses of PA15C5 and 4APA15C5 films at the GC surface was obtained around 9.28 ± 0.40 and 10.50 ± 1.10 nm, respectively. Azacrown modified nanoscale surfaces serve as alkali metal sensor specific for their cavity in the crown ring.     

A Comparative Study of the Modification of Gold and Glassy Carbon Surfaces with Mixed Layers of In Situ Generated Aryl Diazonium Compounds

In situ generated aryl diazonium cations were synthesized in the electrochemical cell by reaction of the corresponding amines with NaNO₂ in aqueous HCl. This paper reports a study of the formation of mixed layers from in situ generated aryl diazonium cations. Firstly, glassy carbon (GC) and gold electrode surfaces were modified with five single in situ generated aryl diazonium salts to obtain their corresponding reductive potential followed by the modification of GC and gold surfaces with eight binary mixed layers of in situ generated aryl diazonium salts. The difference between GC and gold surfaces in terms of in situ formation of two‐component aryl diazonium salt films was compared. The behavior of the mixed layers formed from in situ generated aryl diazonium salts relative to diazonium salts that were pre‐synthesized prior to surface modification was also investigated. Cyclic voltammetry and X‐ray photoelectron spectroscopy were used to characterize the resulting modified GC and gold surfaces. It is found that for some aryl diazonium salts the potential at which reductive adsorption is achieved on gold and GC surfaces is significantly different. For the eight sets of binary mixed layers, the species with more anodic potential are more difficult to attach to the both GC and gold surfaces. The behavior of the mixed layers formed from in situ generated aryl diazonium salts and the pre‐synthesized diazonium salts is similar; which emphasizes the advantage of the in situ approach without any apparent difference in behavior to the presynthesized diazonium salts.     

Electrochemical derivatization of carbon surface by reduction of in situ generated diazonium cations

The derivatization of a glassy carbon electrode surface was achieved by electrochemical reduction of several in situ generated diazonium cations. The diazonium cations were synthesized in the electrochemical cell by reaction of the corresponding amines with NaNO2 in aqueous HCl. The versatility of the method was demonstrated by using six diazonium cations. This deposition method, which involves simple reagents and does not require the isolation and purification of the diazonium salt, enabled the grafting of covalently bounded layers which exhibited properties very similar to those of layers obtained by the classical derivatization method involving isolated diazonium salt dissolved in acetonitrile or aqueous acid solution. Cyclic voltammetry and electrochemical impedance spectroscopy carried out in aqueous solutions containing electroactive redox probe molecules such as Fe(CN)6(3-/4-) and Ru(NH3)6(3+) confirmed the barrier properties of the deposited layers. The chemical composition of the grafted layers was determined by X-ray photoelectron spectroscopy and surface coverage in the range 3 x 10(-10) to 6 x 10(-10) mol cm(-2) was estimated for films grown in our experimental conditions.     

A Comparative Study of Electrochemical Reduction of 4‐Nitrophenyl Covalently Grafted on Gold and Carbon

4‐Nitrophenyl layers were grafted on gold and glassy carbon surfaces by electrochemical reductive adsorption of the corresponding diazonium salt. Electrochemical conversion efficiencies of 4‐nitrophenyl moieties to 4‐aminophenyl moieties on gold versus on glassy carbon in a protic medium were investigated using X‐ray photoelectron spectroscopy (XPS). In total contrast to all previous comparative studies showing greater electrochemical reactivity of aryl diazonium salt‐derived layers on gold than on glassy carbon, a much lower rate of conversion to 4‐aminophenyl was observed on gold than on glassy carbon by both cyclic voltammetry (CV) and chronoamperometry (CA) methods. The lower electron transfer rate during conversion observed on gold versus glassy carbon was proposed to be due to a mechanism related to the molecular structure rearrangement of 4‐nitrophenyl during the process on glassy carbon. However, whilst complete conversion of 4‐nitrophenyl to 4‐aminophenyl on gold by chronoamperometry was achieved, on glassy carbon complete reduction could not be achieved under the same conditions.     

Electrode Modification Using Alkyne Manganese Phthalocyanine and Click Chemistry for Electrocatalysis

In this work, azidobenzene diazonium salt is grafted onto a glassy carbon electrode (GCE) followed by clicking of manganese tetrahexynyl phthalocyanine for the electrocatalysis of hydrazine. The GCE was first grafted via the in situ diazotization of a diazonium salt, rendering the GCE surface layered with azide groups. From this point, the 1,3‐dipolar cycloaddition reaction, catalyzed by a copper catalyst was utilized to ‘click’ the manganese tetrahexynyl phthalocyanine to the surface of the grafted GCE. This new platform was then characterized using cyclic voltammetry (CV), scanning electrochemical microscopy (SECM) and X‐ray photoelectron spectroscopy (XPS). Based on the cyclic voltammetry calibration curve of electrocatalysis for hydrazine, the clicked Mn phthalocyanine electrode proved to be an effective sensor with a sensitivity of 27.38 µA mM^?1 and the limit of detection (LoD) of 15.4 pM which is a great improvement compared to other reported sensors for this analyte.     

Towards the fabrication of label-free amperometric immunosensors using SWNTs

A label-free immunosensor based on the modulation of the electrochemistry of a surface bound redox species, to detect the presence of antibodies, is demonstrated. In this proof of concept study the model epitope was biotin and the model antibody was anti-biotin IgG. Glassy carbon (GC) electrode surfaces were first modified with 4-nitrophenyl groups by electrochemical reductive adsorption of the corresponding aryl diazonium salt. Subsequently, the nitro group was reductively converted into an amine, giving 4-aminophenyl groups. Oxidatively shortened single walled carbon nanotubes (SWNTs) were then covalently attached to the electrode via self-assembly; a procedure that has previously been shown to give SWNTs aligned normal to the surface. 1,1-Di(aminomethyl)ferrocene was attached to the carboxylic acid terminated SWNTs followed by attachment of biotin to the remaining free amine of the ferrocene derivative. Binding of anti-biotin IgG to the surface bound epitope resulted in attenuation of the ferrocene electrochemistry. This label-free immunosensor was successfully able to detect anti-biotin between 30 and 450 ng mL⁻¹.     

Functionalization of glassy carbon with diazonium salts in ionic liquids

The paper reports on the chemical functionalization of glassy carbon electrodes with 4-bromobenzene (4-BBDT) and 4-(4'-nitrophenylazo)benzene diazonium tetrafluoroborate (4-NAB) salts in ionic liquids. The reaction was carried out at room temperature in air without any external electrical bias in either hydrophobic (1-butyl-3-methylimidazolium hexafluorophosphate) or hydrophilic (1-butyl-3-methylimidazolium methyl sulfate) ionic liquids. The resulting surfaces were characterized using X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and electrochemical measurements. Electrochemical reduction of the terminal nitro groups allowed the determination of surface coverage and formation of an amine-terminated carbon surfaces. The results were compared to glassy carbon chemically modified in an aqueous solution in the presence of 1% sodium dodecyl sulfate (SDS) with the same diazonium salt. Furthermore, Raman spectroscopy coupled with electrochemical measurements allowed to distinguish between the reduction of -NO2 to -NH2 group and the -N=N- to -NH-NH- bond.     

Synthesis of cesium selective pyridyl azocalix[n]arenes

A series of pyridylazo calix[n]arenes (n=4, 6, 8) including the first examples of mixed hetroaryl azocalix(n)arenes have been synthesized by coupling calix[n]arenes with diazonium salts derived from amino pyridines. It has been observed that the coupling reaction of diazonium salt obtained from 3-aminopyridine with calix[n]arene gives tetrakis-, hexakis- and octakis (pyridylazo)calix[n]arenes (n=4,6,8) while those derived from 4-aminopyridine give partially substituted (4-pyridylazo)calix[n]arene analogs. There is no reaction of calix(n)arenes with diazonium salts derived from 2-aminopyridine under identical conditions of experiments. The conformational analysis of synthesized compounds have been ascertained by detailed spectral measurements and single crystal X-ray analysis of 5-(3′-pyridylazo)-25,26,27,28-tetrahydroxycalix[4]arene. A rational explanation for the observed partial and exhaustive coupling reaction in the synthesis of heteroaryl azocalix(n)arenes has been suggested. Preliminary evaluation of synthesized derivatives as molecular receptors for metal ions indicates that they have good potential to function as selective ionic filters for cesium ions.     

Syntheses and modifications of bisdiazonium salts of 3,8-benzo[c]cinnoline and 3,8-benzo[c]cinnoline 5-oxide onto glassy carbon electrode and the characterization of the modified surfaces

The goal of this study was to prepare novel glassy carbon electrode surfaces using two similar bis-diazonium salts, 3,8-benzo[c]cinnoline (3,8-BCC-BDAS) and 3,8-benzo[c]cinnoline 5-oxide (3,8-BCCNO-BDAS) at the glassy carbon (GC) surface. These diazonium salts were reduced electrochemically and covalently electrografted onto the glassy carbon electrode surface to form modified electrodes. Electrochemical reduction of 3,8-BCC-BDAS and 3,8-BCCNO-BDAS salts on the electrode surface yielded a compact and stable film. The existence of BCC moieties on the GC surface was characterized by X-ray photoelectron spectroscopy, reflectance-adsorption infrared spectroscopy, cyclic voltammetry, ellipsometry, and electrochemical impedance spectroscopy. The stability and working potential range of the novel modified electrodes were also studied. The possibility of analytical application of these novel surfaces for inorganic cations and especially selectivity to copper ions was investigated. 3,8-diaminobenzo[c]cinnoline (3,8-DABCC) and its 5-oxide derivative (3,8-DABCCNO) were synthesized from the reductive cyclization of 2,2′-dinitrobenzidine and prepared their bisdiazonium salts via the tetrazotization reactions of the diamines with NaNO₂. The structures of 3,8-DABCC and 3,8-DABCCNO and their corresponding bisdiazonium salts are confirmed by spectral analysis.     

Investigation of the Antifouling Properties of Phenyl Phosphorylcholine‐Based Modified Gold Surfaces

Low impedance, antifouling coatings on gold electrodes based on three new zwitterionic phenyl phosphorylcholine (PPC)‐based layers namely 1) reductively adsorbed PPC diazonium salt, 2) dithiocarbamate PPC SAM and 3) lipoamide PPC SAM (PPC coupled to α‐lipoic acid) were evaluated. The layers were assessed for their ability to limit nonspecific adsorption of proteins to electrode surface with some significant differences observed compared with previously studied PPC diazonium salts reductively adsorbed on glassy carbon. Fluorescence microscopy and electrochemical impedance spectroscopy results suggest that protein adsorption is sensitive to the difference in the structure of the PPC molecules and the charge neutrality of the layers. The lipoamide PPC SAM was shown to be the most effective at resisting nonspecific protein adsorption and this layer was as effective as the ‘gold standard’ of oligo(ethylene oxide) SAMs on gold and PPC diazonium salts reductively adsorbed on glassy carbon.     

Microwave-assisted synthesis of novel N-(4-phenylthiazol-2-yl)-benzo[d]thiazole-, thiazolo[4,5-b]pyridine-, thiazolo[5,4-b]pyridine- and benzo[d]oxazole-2-carboximidamides inspired by marine topsentines and nortopsentines

We report the synthesis of novel N-(4-phenylthiazol-2-yl)-substituted benzo[d]thiazole-, thiazolo[4,5-b]pyridine-, thiazolo[5,4-b]pyridine- and benzo[d]oxazole-2-carboximidamides, which were inspired by marine topsentines and nortopsentines. Condensation of 4,5-dichloro-1,2,3-dithiazolium chloride (Appel salt) with various ortho-halogenated anilines, aminopyridines and aminophenols gave the corresponding aryliminodithiazoles in good to excellent yields. Copper(I)-mediated or nucleophilic-assisted cyclization of aryliminodithiazoles furnished cyano-functionalized benzo[d]thiazoles, thiazolo[4,5-b]- and thiazolo[5,4-b]-pyridines and benzo[d]oxazoles. The latter were condensed with substituted 4-phenylthiazol-2-amines to furnish twenty seven new polyaromatic carboximidamides in moderate to good yields.     

A short route to 3-alkynyl-4-bromo(chloro)cinnolines by Richter-type cyclization of ortho-(dodeca-1,3-diynyl)aryltriaz-1-enes

Cleavage of ortho-(dodeca-1,3-diynyl)triazenes in HCl or HBr medium and subsequent cyclization of the resulting diazonium salts is investigated. In the absence of a strong electron-withdrawing substituent, the reaction affords 3-alkynyl-4-bromo(chloro)cinnolines as the only product. A methoxycarbonyl group promotes hydrolysis of 4-halocinnolines which results in the formation of by-products: furo[3,2-c]cinnoline and cinnolinone. Substitution of bromine in 3-(alk-1-ynyl)-4-bromocinnolines is achieved with methylamine, Na₂S and ethynylbenzene affording pyrrolo[3,2-c]cinnoline, thieno[3,2-c]cinnoline and 3,4-diethynylcinnoline, respectively.     

Modification of glassy carbon electrode by the electrochemical oxidation of 3‐aminophenylcalix[4]pyrrole in nonaqueous media

3‐Aminophenylcalix[4]pyrrole (3APCP) was grafted to a glassy carbon (GC) surface during the electrochemical oxidation process in 0.1 M tetrabutylammoniumtetra‐fluoroborate (TBATFB) containing acetonitrile solution. The presence of a surface film was confirmed electrochemically by comparing voltammograms of dopamine and ferricyanide redox probes at the bare and modified electrodes. Reflection‐absorption infrared spectroscopy (RAIRS), XPS, atomic force microscopy (AFM), ellipsometry and the contact angle measurements were also employed to characterize 3APCP film on GC electrode. RAIRS analysis revealed that calix[4]pyrrole was bonded to the glassy carbon surface via the etheric linkage. The stability of the modified GC electrode was also studied. Copyright © 2011 John Wiley & Sons, Ltd.