Identification of Anionic Supramolecular Complexes of Sulfonamide Receptors with Cl<Superscript>−</Superscript>, NO<Stack><Subscript>3</Subscript><Superscript>−</Superscript></Stack>, Br<Superscript>−</Superscript>, and I<Superscript>−</Superscript> by APCI-MS

As part of a mass spectrometric investigation of the binding properties of sulfonamide anion receptors, an atmospheric pressure chemical ionization mass spectrometric (APCI-MS) method involving direct infusion followed by thermal desorption was employed for identification of anionic supramolecular complexes in dichloromethane (CH₂Cl₂). Specifically, the dansylamide derivative of tris(2-aminoethyl)amine (tren) (1), the chiral 1,3-benzenesulfonamide derivatives of (1R,2S)-(+)-cis-1-amino-2-indanol (2), and (R)-(+)-bornylamine, (3), were shown to bind halide and nitrate ions in the presence of (n−Bu)₄N⁺X⁻ (X⁻ = Cl⁻, NO₃⁻, Br⁻, I⁻). Solutions of receptors and anions in CH₂Cl₂ were combined to form the anionic supramolecular complexes, which were subsequently introduced into the mass spectrometer via direct infusion followed by thermal desorption. The anionic supramolecular complexes [M+X]⁻, (M=1–3, X⁻=Cl⁻, NO₃⁻, Br⁻, I⁻) were observed in negative mode APCI-MS along with the deprotonated receptors [M−H]⁻. Full ionization energy of the APCI corona pin (4.5 kV) was necessary for obtaining mass spectra with the best signal-to-noise ratios.     

Influence of ion size on the stability of chloroplumbates containing PbCl<Stack><Subscript>5</Subscript><Superscript>−</Superscript></Stack> or PbCl<Stack><Subscript>6</Subscript><Superscript>2−</Superscript></Stack>

The enthalpies of formation of PbCl₄, PbCl₅⁻ and PbCl₆²⁻, originating from quantum mechanics, have enabled the thermodynamic behaviour of these ions with respect to Cl-detachment to be assessed. The stability of salts containing PbCl₅⁻ and PbCl₆²⁻ as a function of the dimensions of these anions and complementary cations was studied using an approach combining the Kapustinskii-Yatsimirskii equation with basic thermochemical relationships. It was found that hexachloroplumbates of monovalent metal cations will not dissociate into metal chlorides and PbCl₄, provided the complementary cations are suitably large in size. Hexachloroplumbates of divalent metal cations have not yet been synthesised since no known metal cations attain the requisite large size. Such salts will not dissociate if the divalent metal cations are able to complex suitably large electron-donating ligands. The pentachloroplumbates of both monovalent and divalent metal cations are unstable, since no known metal cations have appropriately large ionic radii. The approach adopted appears to be useful for the examination of the thermal behaviour, stability and reactivity of chloroplumbates.     

Mercury complex [(HOCH<Subscript>2</Subscript>)<Subscript>3</Subscript>CNH<Subscript>3</Subscript>]<Stack><Subscript>2</Subscript><Superscript>+</Superscript></Stack> [HgI<Subscript>4</Subscript>]<Superscript>2−</Superscript>: Synthesis and structure

The complex [(HOCH₂)₃CNH₃] ₂ ⁺ [HgI₄]^2? (I) was synthesized by reacting (trioxymethyl)methylammonium iodide with mercury dioide (2: 1 mol/mol) in acetone. X-ray crystallography shows that the complex consists of two types of crystallographically independent [(HOCH₂)₃CNH₃]⁺ cations and tetrahedral anions [HgI₄]^2? (IHgI, 106.49(2)°–113.99(4)°; Hg-I, 2.7849(8)-2.8105(8) Å. [(HOCH₂)₃CNH₃]⁺ cations are linked via hydrogen bonds O…H-N and O-H…N (O…N, 2.84–2.92 Å) to form polymer chains, which are cross-linked with one another via anions (I…H, 2.81, 2.82 Å).     

Chemical Bonding in the Complexes XeF<Stack><Subscript>5</Subscript><Superscript>+</Superscript></Stack>XF<Stack><Subscript>6</Subscript><Superscript>−</Superscript></Stack> (X = P,As, Sb,and Bi)

Ab initio quantum-chemical calculations of the complexes XeF ₅ ⁺ XF ₆ ^? (X = P, As, Sb, and Bi) were performed with the use of relativistic pseudopotentials for heavy atoms and full-electron basis sets. The chemical bonds were characterized by the parameters of critical points (electron density, its Laplacian, total electron energy, and its kinetic and potential components). It was demonstrated that the interaction between the XeF ₅ ⁺ cation and the XF ₆ ^? anion in XeF ₅ ⁺ XF ₆ ^? follows a key-lock scheme involving directed interactions of bridging fluorine atoms F_b → Xe and that the structuring function of the lone electron pair of the Xe atom is to compensate the destabilizing electrostatic interaction between the Xe and X atoms bearing excess positive charges.     

Study on nonlinear kinetic and thermodynamics of oscillating reaction of amino Acid-BrO<Stack><Subscript>3</Subscript><Superscript>−</Superscript></Stack>-Mn<Superscript>2+</Superscript>-H<Subscript>2</Subscript>SO<Subscript>4</Subscript>-acetone system

With the help of the kinetic parameters (the rate constant (k _in k _p) and the apparent activation energy (E _in E _p) of the oscillatory induction period and oscillation period) of the oscillating reaction using thirteen amino acids, leucine (Leu), threonine (Thr), arginine (Arg), lysine (Lys), histidine (His), alanine (Ala), glutamine (Glu), glycine (Gly), methionine (Met), cystine (Cys), tryptophan (Trp), serine (Ser) and tyrosine (Tyr), as organic substrates in amino acid-BrO₃⁻-Mn²⁺-H₂SO₄-acetone system, then based on the Oregonator model and the thermodynamics theory on irreversible process, the thermodynamic function (ΔH _in, ΔG _in, ΔS _in and ΔH _p, ΔG _p, ΔS _p) of these oscillating system are studied. The results indicate the entropy ΔS of these oscillating reaction are negative, thereby it is proved that the oscillating reaction is a noequilibrium system with dissipation structure in agreement with the character of the oscillating reaction from disorder to order in irreversible thermodynamics. These are satisfactorily to explain the experimental phenomena.     

Reactions of [NH<Stack><Subscript>3</Subscript><Superscript>+·</Superscript></Stack>, H<Subscript>2</Subscript>O] with carbonyl compounds: A McLafferty rearrangement within a complex?

The reactions of the water solvated ammonia radical cation [NH(3)(+*), H(2)O] with a variety of aldehydes and ketones were investigated. The reactions observed differ from those of low energy aldehydes and ketones radical cations, although electron transfer from the keto compound to ionized ammonia is thermodynamically allowed within the terbody complexes initially formed. The main process yields an ammonia solvated enol with loss of water and an alkene. This process corresponds formally to a McLafferty fragmentation within a complex. With aldehydes, another reaction can take place, namely the transfer of the hydrogen from the CHO group to ammonia, leading to the proton bound dimer of ammonia and water, and to the NH(4)(+) cation. Comparison between the available experimental results leads to the conclusion that the McLafferty fragmentation occurs within the terbody complex initially formed, with no prior ligand exchange, the water molecule acting as a spectator partner.     

The ESCA analysis of the B<Subscript>3</Subscript>H<Stack><Subscript>8</Subscript><Superscript>−</Superscript></Stack> anion

Compounds [Et₄N]₂B₃H₈ and CsB₃H₈ are studied using the ESCA method. The results of analysis of the B1s electron spectra and estimation of the effective charge differences in [Et₄N]₂B₃H₈ are compared to the data of theoretical calculations of the B₃H₈⁻ anion.     

Hydration of CBr<Subscript>3</Subscript>COOH molecules and CBr<Subscript>3</Subscript>CO<Stack><Subscript>2</Subscript><Superscript>–</Superscript></Stack> anions in aqueous solutions

The optimal structures and the vibrational frequencies of H-bonded complexes formed from one-two CBr₃COOH molecules or the CBr₃CO ₂ ^– anion with water molecules are calculated by density functional theory (B3LYP/6-31++G(d,p)). The comparison of the obtained results with the known Raman spectra of the CBr₃COOH–H₂O and NaCBr₃CO ₂ ^– ·H₂O solutions (with component molar ratios of ≤1:16) shows that they include stable hydrates: CBr₃COOH·H₂O and CBr₃CO ₂ ^– ·(H₂O)₆. The first one has a cyclic form, and the second has a cubic globular form. The vibrational band frequencies of the CBr₃COOH molecule and the CBr₃CO ₂ ^– anion in the spectra of both solutions are almost completely determined by the mutual arrangement of units in these hydrates.     

A new method of synthesis of the B<Subscript>3</Subscript>H<Stack><Subscript>8</Subscript><Superscript>−</Superscript></Stack> anion

A new method of synthesis of the B₃H₈⁻ anion has been suggested. The method uses the reaction of some metal halides (CuCl, SnCl₂, CrCl₃, PbF₂, PbCl₂, PbBr₂, and BiCl₃) with sodium tetrahydroborate. It is characterized by high (up to quantitative) yields and simplicity of isolation of the target products ((n-C₄H₉)₄N)[B₃H₈] and Cs[B₃H₈].     

Kinetics of electroreduction of S<Subscript>2</Subscript>O<Stack><Subscript>8</Subscript><Superscript>2−</Superscript></Stack> anions on mechanically renewable silver electrode

The kinetics of electroreduction of peroxodisulfate anions on a mechanically renewed silver electrode is studied by voltammetric and impedance methods. Impedance diagrams obtained in the region of negatively charged metal surface are successfully modeled by the equivalent circuit formed by the solution resistance and also the reaction resistance connected in parallel with the constant-phase element substituted for the double layer capacitance. The analysis of experimental data carried out in terms of this circuit and their comparison with the literature data makes it possible to assume that the reduction kinetics of S₂O ₈ ^2? anions on this electrode can be adequately described in the framework of the phenomenological theory of slow discharge. The reasons for deviation of the literature data on the kinetics of this reaction on polycrystalline Ag electrode from the relationships following from the slow discharge theory are put forward and substantiated.     

A molecular dynamics simulation of H<Subscript>3</Subscript>PO<Subscript>4</Subscript>, H<Subscript>2</Subscript>PO<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack>, and the protonated form of N,N-dimethylformamide in liquid N,N-dimethylformamide

The molecular dynamics simulation method was for the first time used to study the structural and energy parameters of H₃PO₄, H₂PO₄⁻, and (DMFA)H⁺ (protonated dimethylformamide) in liquid N,N-dimethylformamide. The predominant orientation of the nearest neighbors of H₃PO₄, H₂PO₄⁻, DMFA, and (DMFA)H⁺ was determined from ranked distribution functions. The most probable structure of H-bonded complexes was obtained. It was shown that H₃PO₄ formed H-bonds with two DMFA molecules, and and (DMFA)H⁺ formed H-bonds with one molecule. The dependence of Coulomb interaction energies on the distance between H₃PO₄, H₂PO₄⁻, (DMFA)H⁺, and DMFA had the form of damped oscillations, as is characteristic of intermolecular interactions in pure DMFA. The molecular dynamics simulation of the H₂PO₄⁻-(DMFA)H⁺-DMFA ternary system showed a high probability of the formation of contact ion pairs.     

Experimental Determination of the Isotherm at 15°C of the System Mg<Superscript>2+</Superscript>/Cl<Superscript>−</Superscript>, SO<Subscript>4</Subscript><Superscript>2</Superscript>–H<Subscript>2</Subscript>O

Summary.  The diagram of the ternary system Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O was established at 15°C by means of analytical and conductimetric measurements. Three compounds were found in this diagram, which are MgSO₄·6H₂O, MgSO₄·7H₂O, and MgCl₂·6H₂O. The solubility field of MgSO₄·7H₂O is important whereas those of MgSO₄·6H₂O and MgCl₂·6H₂O are small. The compositions (mass-%) of the two invariant points determined by the two methods are: MgSO₄:MgCl₂=2.73:33.80 and MgSO₄: MgCl₂=3.38:28.91. Both the measured and the calculated isotherm at 15°C have been used for modelling of the diagram Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O between 0 and 35°C. The polythermal invariant point was approximately located between 15 and 10°C.  Corresponding author. E-mail: ariguib@planet.tn Received October 16, 2002; accepted (revised) December 3, 2002 Published online April 24, 2003 RID="a" ID="a" Dedicated to Prof. Dr. Heinz Gamsj?ger on the occasion of his 70^th birthday     

Synthesis and Structure of the bismuth complex [Ph<Subscript>3</Subscript>PrP]<Stack><Subscript>4</Subscript><Superscript>+</Superscript></Stack>[Bi<Subscript>4</Subscript>I<Subscript>16</Subscript>]<Superscript>4−</Superscript>

The complex [Ph₃P] ₄ ⁺ [Bi₄I₁₆]^4? · 2 Me₂C=O (I) was synthesized by the reaction of triphenyl(propyl)phosphonium iodide with bismuth iodide in acetone. The crystal structure of complex I was determined by X-ray crystallography. It contains, in addition to solvent molecules, two types of crystallographically independent tetrahedral tetraphenyl(propyl)phosphonium cations and tetranuclear anions [Bi₄I₁₆]^4? in a chair conformation with the bismuth atoms being in an octahedral coordination. The Bi-I distances in the anion vary within 2.8768(4)–3.2524(4) Å.     

Preparation of nano-SO<Stack><Subscript>4</Subscript><Superscript>2−</Superscript></Stack>/TiO<Subscript>2</Subscript> catalyst and its application in esterification of sebacic acid with 2-ethyl hexanol

A pure anatase phase nano-SO₄²⁻ /TiO₂ catalysts were synthesized and their catalytic activities were tested. Nano-SO₄²⁻/TiO₂ shows high activity and effective re-usable when used as basic catalysts for the synthesis of dioctyl sebacate.     

Isochoric isothermal pyrolysis of trifluoroiodomethane: CF<Stack><Subscript>3</Subscript><Superscript>·</Superscript></Stack> recombination kinetics

The rate constant of CF ₃ ^· recombination (\(k_{(CF_3 )_2 }^M \)) in the isochoric isothermal pyrolysis of trifluoroiodomethane at T = 625–732 K and P = 29–300 Torr was derived from molecular iodine accumulation curves. Using literature data for the high-pressure limit and the results of our measurements, an analytical expression for \(k_{(CF_3 )_2 }^M \) was set up for T = 300–1300 K and any pressure of the buffer gas CF₃I.     

Single-phased white-light emitting CaAl<Subscript>2</Subscript>Si<Subscript>2</Subscript>O<Subscript>8</Subscript>: Eu<Superscript>2+</Superscript>, Mn<Superscript>2+</Superscript> phosphors prepared by a sol–gel method

CaAl₂Si₂O₈: Eu²⁺, Mn²⁺ phosphors have been prepared by a sol–gel method. X-ray diffractometer, spectrofluorometer and UV–Vis spectrometer were used to characterize structural and optical properties of the samples. The results indicate that anorthite (CaAl₂Si₂O₈) directly crystallizes at 1000 °C in the sol–gel process. CaAl₂Si₂O₈: Eu²⁺, Mn²⁺ phosphors show two emission bands excited by ultraviolet light. Blue (around 415 nm) and yellow (around 575 nm) emissions originate from Eu²⁺ and Mn²⁺, respectively. With appropriate tuning of Mn²⁺ content, CaAl₂Si₂O₈: Eu²⁺, Mn²⁺ phosphors exhibit different hues and relative color temperatures.     

Comparison of Magnetic Properties between Spin Singlet and Triplet Li<Subscript>3</Subscript>Al<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> Clusters

With a second-order Møller–Plesset perturbation theory and Hartree–Fock nuclear magnetic resonance calculations, we investigated the magnetic properties of spin singlet and triplet Li₃Al ₄ ^? clusters. The obtained gauge-independent atomic orbital magnetic shielding tensors confirm the paramagnetism of singlet Li₃Al ₄ ^? and diamagnetism of the triplet. The planar rings composed of four aluminum atoms make the magnetic properties of Li₃Al ₄ ^? clusters versatile. The localized molecular orbital, low symmetry of geometric conformation and narrow gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital are found to correlate with the paramagnetism of singlet Li₃Al ₄ ^? . The origin of the paramagnetism is explained. In triplet Li₃Al ₄ ^? , the two outmost orbitals are degenerate, causing a conversion from the paramagnetism to diamagnetism.     

SO<Stack><Subscript>2</Subscript><Superscript>−·</Superscript></Stack> electron transfer ion/ion reactions with disulfide linked polypeptide ions

Multiply-charged peptide cations comprised of two polypeptide chains (designated A and B) bound via a disulfide linkage have been reacted with SO2-* in an electrodynamic ion trap mass spectrometer. These reactions proceed through both proton transfer (without dissociation) and electron transfer (with and without dissociation). Electron transfer reactions are shown to give rise to cleavage along the peptide backbone, loss of neutral molecules, and cleavage of the cystine bond. Disulfide bond cleavage is the preferred dissociation channel and both Chain A (or B)-S* and Chain A (or B)-SH fragment ions are observed, similar to those observed with electron capture dissociation (ECD) of disulfide-bound peptides. Electron transfer without dissociation produces [M + 2H]+* ions, which appear to be less kinetically stable than the proton transfer [M + H]+ product. When subjected to collision-induced dissociation (CID), the [M + 2H]+* ions fragment to give products that were also observed as dissociation products during the electron transfer reaction. However, not all dissociation channels noted in the electron transfer reaction were observed in the CID of the [M + 2H]+* ions. The charge state of the peptide has a significant effect on both the extent of electron transfer dissociation observed and the variety of dissociation products, with higher charge states giving more of each.     

Synthesis and physicochemical study of the PMo<Subscript>11</Subscript>(TiO)O<Stack><Subscript>39</Subscript><Superscript>5−</Superscript></Stack> heteropolyanion

Procedures were developed for the synthesis of the guanidinium (Gua) and tetrabutylammonium (TBA) salts of 11-molybdotitano(IV)phosphate heteropolyanion (MTPH) from solutions with the stoichiometric ratio P: Mo = 1: 11 and in excess of titanium(IV) ions, Ti: P ≥ 1.5, at pH 1.85–1.90. MTPH was isolated as the (Gua)₅PMo₁₁(TiO)O₃₉ and (TBA)₅PMo₁₁(TiO)O₃₉ salts. The composition and formula of MTPH were established by chemical analysis, electronic absorption spectroscopy in the visible region of the oxidized and reduced MTPH forms, IR spectroscopy, and ³¹P NMR. H₅PMo₁₁(TiO)O₃₉, obtained by ion exchange of the Gua salt in an aqueous-organic medium, is a strong pentabasic acid. MTPH reacts with H₂O₂ to form a peroxo complex with limited stability in an aqueous solution. In aqueous-organic media, the peroxo complex is more stable. In acetonitrile, MTPH persists for several days.