Click approach to the three‐component synthesis of novel β‐hydroxy‐1,2,3‐triazoles catalysed by new (Cu/Cu2O) nanostructure as a ligand‐free,green and regioselective nanocatalyst in water

Copper nanostructures were produced as an effective and regioselective catalyst for the synthesis of 1,2,3‐triazoles from a wide range of raw materials, such as sodium azide, epoxides and terminal alkynes, in water via a one‐pot three‐component click reaction. The new heterogeneous catalyst was prepared by a simple ball mill reduction of CuO with NaBH₄ using a ball‐to‐powder weight ratio of 50:1 under air atmosphere at room temperature. The catalyst was fully characterized using scanning electron microscopy, energy‐dispersive X‐ray analysis, Fourier transform infrared spectroscopy and X‐ray diffraction. The copper nanostructures catalysed both ring opening and triazole cyclization steps. Products were obtained in high yields and short reaction times. The reactions were performed at ambient temperature in water as a green solvent. The Cu/Cu₂O nanostructures revealed high reusability and high stability via a simple recycling process.     

Fabrication of Hierarchically Structured MOF‐Co3O4 on Well‐aligned CuO Nanowire with an Enhanced Electrocatalytic Property

Engineering appropriate shape and size of three‐dimensional inorganic nanostructures materials is of one the main critical problems in pursuing high‐performance electrode materials. Herein, we fabricate a metal‐organic framework derived cobalt oxide (Co₃O₄) are grown on copper oxide nanowire (CuO NWs) supported on the surface of 3D copper foam substrate. The highly aligned CuO NWs were prepared by using electrochemical anodization of copper foam in ambient temperature and followed by MOF Co₃O₄ was grown via a simple in situ solution deposition then consequent calcination process. The obtained binder‐free 3D CuO NWs@Co₃O₄ nanostructures were further characterized by using X‐ray diffraction, X‐ray photoelectron spectroscopy, field‐emission scanning electron microscopy, and transmission electron microscopy. Furthermore, electrochemical sensing of glucose was studied by using Cyclic Voltammetry, and chronoamperometry techniques. Interestingly, 3D CuO NWs@Co₃O₄ electrode exhibits excellent performance for the oxidation of glucose compared with individual entities. The proposed sensor shows wide linear ranges from 0.5 μM to 0.1 mM with the sensitivity of 6082 μA/μM and the lowest detection limit (LOD) of 0.23 μM was observed with the signal to noise ratio, (S/N) of 3. The superior catalytic oxidation of glucose mainly is endorsed by the excellent electrical conductivity and synergistic effect of the Co₃O₄ and CuO NWs.     

Copper hydroxide nanoneedle and nanotube arrays fabricated by anodization of copper

Cu(OH)2 nanoneedle and nanotube arrays were electrochemically synthesized by anodization of a copper foil in an aqueous solution of KOH. The nanoneedles and nanotubes were constructed from nanosheets of Cu(OH)2. Controlling the electrochemical conditions can qualitatively modulate the lengths, amounts, and shapes of Cu(OH)2 nanostructures. The composition of as-prepared Cu(OH)2 nanostructures has been confirmed by X-ray diffraction and select-area electron diffraction. The influences of the KOH concentration of the aqueous electrolyte, the reaction temperature, and current density on the morphology of Cu(OH)2 nanostructures were investigated, and the formation mechanism of the nanostructures is discussed. Furthermore, Cu(OH)2 nanoneedles can be successfully transformed to CuO nanoneedles with little morphology change by heating. This work developed a simple, clean, and effective route for fabrication of large area Cu(OH)2 or CuO nanostructured films.     

Synthesis, characterization, and electrochemical properties of self-assembled leaf-like CuO nanostructures

A simple hydrothermal process was used to synthesize the assembled leaf-like copper oxide (CuO) from copper hydroxide and urea in aqueous solution. The field emission scanning electron microscopy revealed that the individual CuO leaf-like nanostructure has a dimension of about 0.5–1.5 μm in length, 50–70 nm in thickness, and 80–110 nm in width, respectively. These CuO nanostructures were structurally characterized by X-ray diffraction and Raman spectroscopy, which showed that the CuO nanostructures prepared from the hydrothermal process have high crystalline properties with a monoclinic structure. X-ray photoelectron spectroscopy studies confirmed that the as-prepared sample is composed of CuO, which is consistent with X-ray diffraction patterns. The CuO nanostructures were used as electrode materials for lithium-ion batteries, demonstrating electrochemical properties of a high initial discharge capacity of approximately 1,028 mAh/g along with good cycle stability.     

Copper(II) Acetylacetonate: An Efficient Catalyst for Huisgen‐Click Reaction for Synthesis of 1,2,3‐Triazoles in Water

An efficient and green copper(II ) acetylacetonate‐catalyzed protocol for the Huisgen‐click reaction in water at 100 °C has been established. The protocol was not only suitable for the reaction between organic azides and alkynes, but also suitable for one‐pot three‐component reaction among alkyl halides, NaN₃ and alkynes.     

The composite catalysts of Cu/CuxO nanoparticles supported on the carbon fibers were prepared for styrene oxidation reaction

In this paper a novel simple method for preparing two different catalysts with various‐valences copper was reported. Carbon nanofibers supported copper‐cuprous oxide nanoparticles (Cu‐Cu₂O NPs/CNFs) and copper oxide nanoparticles (CuO NPs/CNFs) through electrospinning, adsorption and reduction in the high‐pressure hydrogenation and the high‐temperature calcination methods. These catalysts were investigated by a series of characterizations and were applied in reaction in nitrogen atmosphere, which had a good catalytic activity and selectivity of benzaldehyde for the reaction. Above all, the new study has been certified clearly, in which Cu‐Cu₂O NPs/CNFs and CuO NPs/CNFs composite catalysts enhanced the generation of benzaldehydeand the excellent catalytic properties were exhibited.     

Tailoring the structure of metal oxide nanostructures towards enhanced sensing properties for environmental applications

The present article reviews recent works in our laboratory about the sensing properties to toxic gases using nanostructured WO(3), TiO(2), FTiO(2), and CuO functionalized quartz crystal microbalance (QCM) sensors. WO(3) and TiO(2) functionalized QCM sensors have much shorter response time than those functionalized by conventional hydrogen-bond acidic branched copolymers for detection of dimethyl methylphosphonate (DMMP). FTiO(2) functionalized QCM sensors can improve the gas sensing characteristics by shortening the response time but at the price of partial irreversibility. The sensing mechanism was examined by diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Varied CuO nanostructures were synthesized by simple modulation of reaction conditions. All the as-prepared CuO was applied on QCM resonators and explored for HCN sensing. Surprisingly, responses of all the sensors to HCN were found to be in an opposite direction as compared with other common volatile substances, offering excellent selectivity for HCN detection. The sensitivity was very high, and the response and recovery were very fast. Comparison of the specific surface areas of CuO nanostructures showed that CuO of higher surface area is more sensitive than that of lower surface area, indicating that the specific surface area of these CuO nanostructures plays an important role in the sensitivity of related sensors. Based on experimental results, a sensing mechanism was proposed in which a surface redox reaction occurs between CuO and Cu(2)O on the CuO nanostructures reversibly upon contact with HCN and air, respectively. The CuO functionalized QCM sensors are considered to be a promising candidate for trace HCN gas detection in practical applications.     

Urea Assisted Synthesis of Flower Like CuO Nanostructures and Their Chemical Sensing Application for the Determination of Cadmium Ions

The novel nanostructures of CuO with improved morphology are strongly required for the development of devices with enhanced performance. In this study flower like nanostructures of CuO are synthesized by hydrothermal method using urea as tuning material for the morphology of CuO during the growth process. Scanning electron microscopy (SEM) and X‐ray diffraction (XRD) techniques were used for the characterization of these nanostructures. The nanostructures are highly dense, uniform and well aligned on the gold coated glass substrate. Moreover, CuO nanostructures exhibited pure phase of CuO. These novel CuO nanostructures were potentially used for the construction of cadmium ion sensor by functionalizing with tetrathia‐12‐crown‐4 a selective cadmium ion ionophore. The proposed cadmium ion sensor has detected the wide range of cadmium ion concentrations from 1.0×10^?9–1.0×10^?1 M with a sensitivity of 29.3±0.3 mV/decade and also a fast response time of less than 10.0 s is demonstrated. CuO nanostructures based cadmium ion selective electrode has also shown excellent reproducibility, repeatability, selectivity, and stability. The sensor electrode was also used as indicator electrode for the confirmation of practical utility and the obtained result describes the good behavior of the sensor in the potentiometric titration for the determination of cadmium ions.     

Introduction of Ag/CuO/MCM‐48 as an efficient catalyst for the one‐pot synthesis of novel pyran‐pyrrole hybrids

Bimetallic silver and copper incorporated mesoporous MCM‐48 (Ag/CuO/MCM‐48) was synthesized by simple wet‐impregnation method. The knowledge about its structural properties was gathered by means of Fourier transform‐infrared, energy‐dispersive X‐ray, X‐ray diffraction, field emission‐scanning electron microscopy, transmission electron microscopy and Brunauer–Emmett–Teller analyses. The catalytic activity of Ag/CuO/MCM‐48 was examined in the one‐pot three‐component reaction of 3‐(1‐methyl‐1H‐pyrrol‐2‐yl)‐3‐oxopropanenitrile, malononitrile and various aromatic aldehydes leading to novel pyran‐pyrrole hybrid derivatives in reduced reaction times (5–10 min) and excellent yields (88–97%). Application of Ag/CuO/MCM‐48 as a potent heterogeneous catalyst with good reusability up to five times, use of ethanol as an eco‐compatible medium and chromatography‐free work‐up are some crucial green aspects of this procedure.     

负载型Cu-Pd双金属纳米氧化物催化剂催化合成碳酸二乙酯：Cu（I）作为活性中心

催化反应活性与催化剂活性组分的存在价态密切相关,所以探讨催化剂在反应过程中的活性中心及其价态变化,对于催化反应机理和催化剂的研究都显得十分重要.目前对于氧化羰基合成碳酸二甲酯催化剂的机理的探讨很多,主要存在的争议是Cu+还是Cu2+作为活性中心,以及铜物种的配位状态.大多体系都是以分子筛为载体的铜基催化剂,其活性中心的研究存在铜离子在分子筛中的定位问题,而且催化活性也会受到分子筛结构的影响.采用这种方法研究活性中心的影响因素较多,存在一定的局限性.因此,直接制备纳米级的铜基氧化物用于本催化体系,有利于更直观简单地探索其活性中心.纳米级金属氧化物材料是一种新型的功能性材料,而纳米铜基氧化物(CuO和Cu2O)因其独特的物化性质和结构而引起广泛关注.我们采用水热法制备纳米CuO及其它氧化物,研究了NaOH浓度对催化剂的催化性能的影响;葡萄糖是一种还原性较强的还原剂,其用量必定会对所制备的氧化物的物种有所影响.为了探究Cu0和Cu+在本体系中的作用,采用不同葡萄糖用量制备了具有不同Cu2O含量的PdCl2/Cu-Cu2O催化剂.在上述研究基础上,我们采用X射线衍射、场发射扫描电子显微镜、热重分析、等离子体原子发射光谱等表征手段研究了负载型纳米铜基氧化物催化剂在合成碳酸二乙酯反应中催化性能差异的原因,旨在直接考察活性中心主要是Cu+还是Cu2+,避免分子筛等体系中载体结构的影响,研究结果更具参考性.结果发现, NaOH浓度为5 mol/L时制备的PdCl2/CuO和PdCl2/Cu-Cu2O催化剂的性能优于其他浓度下制备的催化剂,这可能是由于不同浓度的碱溶液会对铜离子的沉淀过程产生不同的影响;相同NaOH浓度下制备的催化剂中, PdCl2/Cu-Cu2O催化剂的催化性能明显优于PdCl2/CuO催化剂,这可能是由于PdCl2/Cu-Cu2O催化剂更有利于反应过程中电子的传递,从而表现出更好的催化性能,我们推测Cu0和Cu+可能更有利催化乙醇氧化羰基合成DEC;表征分析发现PdCl2/CuO和PdCl2/Cu-Cu2O均具有很好的热稳定性,两种催化剂中PdCl2负载量几乎相同,因此,主要影响催化性能的因素是载体CuO和Cu-Cu2O中铜的价态.采用不同葡萄糖用量制备了含有不同Cu2O含量的PdCl2/Cu-Cu2O催化剂,其中, PdCl2/Cu-Cu2O-2催化剂中含有更多的Cu2O,在反应中乙醇转化率达到了7.2%, DEC的选择性为97.9%, DEC的时空收率可达到151.9 mg·g–1·h–1.由此可见在乙醇气相氧化羰基合成DEC体系中, Cu+是主要的活性中心.     

Copper oxide nanostructures: Controlled synthesis and their catalytic performance

Oval-plate-like, sphere-like, bundle-like and plate-like copper oxide (CuO) nanostructures were prepared by hydrothermal method using Cu(CH₃COO)₂·H₂O and NaOH as the reagents in the absence of any surfactants or templates. The morphology and structure of CuO nanostructures could be easily tailored by adjusting the amount of NaOH. The catalytic activity of the as-prepared CuO nanostructures was demonstrated by catalytic oxidation of methylene blue (MB) in presence of hydrogen peroxide (H₂O₂). The oval-plate-like CuO exhibited better catalytic activity and which was mainly attributed to the larger specific surface area.     

Syntheses of CuO nanostructures in ionic liquids

A simple and efficient approach is developed to fabricate single-crystalline CuO nanostructures through an ionic liquid assisted one-step low-temperature solid-state route.Both nanoparticles(5 nm in size)and nanorods(5-10 nm in diameter and 50-100 nm in length)of monoclinic CuO were obtained. These synthesized CuO nanostructures were characterized by X-ray diffraction(XRD),transmission electron microscopy(TEM),selected area electron diffraction(SAED),X-ray photoelectron spectros- copy(XPS),energy dispersive spectroscopy(EDS)and nitrogen adsorption analysis.The morpholo- gies of the nanostructures can be controlled by tuning the amount of NaOH and ionic liquids.The growth mechanism of CuO nanostructures is investigated.     

Copper(II)–Thymine Coordination Polymer Nanoribbons as Potential Oligonucleotide Nanocarriers

The direct reaction between copper nitrate, thymine‐1‐acetic acid, and 4,4′‐bipyridine in water leads to the formation of a blue colloid comprising uniform crystalline nanoribbons (length >1 μm; width ca. 150–185 nm; diameter ca. 15–60 nm) of a coordination polymer. The polymer displays a thymine‐based structure freely available for supramolecular interactions. These nanostructures show significant selective interaction with single‐stranded oligonucleotides based on adenine. Remarkably, they present low cell toxicity in three cell lines–despite the copper(II) content–and can be used as nanocarriers of oligonucleotides. These results suggest the potential of these types of nanostructures in several biological applications.     

多元醇法形貌可控制备氧化亚铜微纳米颗粒

以硝酸铜、乙酸铜、乙酰丙酮铜为原料,采用多元醇还原法合成制备了氧化亚铜立方体、微球、空心球、核壳结构等微纳米颗粒。 利用X射线衍射仪(XRD)、场发射扫描电子显微镜(FE-SEM)、透射电子显微镜(TEM)、高分辨透射电子显微镜(HRTEM)和紫外可见吸收光谱(UV-Vis)等测试手段对样品的物相、形貌、元素组分及吸光性能进行了表征。 同时考察了铜源、反应时间、和多元醇类型对氧化亚铜微纳米材料形貌的影响,对产物形成机理进行了初步的探讨。 对产物形成机理进行了初步的探讨。 采用简单低廉的多元醇合成法,可以控制合成不同相貌的氧化亚铜微纳米结构。 对制备形貌可控的氧化物具有一定的指导意义。     

Kinetics of Adsorption and Desorption of Poly(ethylenimine) and Its Complex with Copper(II) on Copper(II) Oxide Powder

Adsorption of poly(ethylenimine) and complexes of poly(ethylenimine) with copper(II) ions on copper(II) oxide powder has been investigated. The rate of adsorption and reaction between poly(ethylenimine) and CuO is very fast. The desorption rate of the complex of poly(ethylenimine) with copper(II) ions is slower and decreases when the initial polymer concentration is decreased. The desorption rate passes through a minimum when the initial concentration of CuO powder in the mixture increases. A mathematical model of polymer adsorption and desorption is proposed. Copyright 2000 Academic Press.     

Temperature driven morphological changes of hydrothermally prepared copper oxide nanoparticles

The size and shape of nanocrystals have a strong effect on the optical, electrical and catalytic properties. Therefore, controlling the size, shape and structure of nanocrystals is technically important. The controlled synthesis of CuO nanostructures was achieved using a hydrothermal process by simply controlling the precipitation reaction temperature between copper nitrate trihydrate and sodium hydroxide. The Scanning Electron Microscopy (SEM), EDS, XRD, and FTIR analysis revealed that the synthesized product at 200 °C is of pure copper oxide particles. From Scherrer formula, the prepared CuO particles varied approximately 3–7 nm in size simply by varying the reaction temperature. The synthesized particles exhibited a regular flake like morphology and had a uniform size distribution. The morphology and size depend on the reaction conditions. Copyright © 2008 John Wiley & Sons, Ltd.     

Conversion of CuO Nanoplates into Porous Hybrid Cu2O/Polypyrrole Nanoflakes through a Pyrrole‐Induced Reductive Transformation Reaction

Porous hybrid Cu₂O/polypyrrole nanoflakes have been synthesized from solid CuO nanoplate templates through the pyrrole‐induced reductive transformation reaction at elevated temperature. The conversion mechanism involves the reductive transformation of CuO to Cu₂O and the in situ oxidative polymerization of pyrrole to polypyrrole. In addition, the morphology of the as‐converted nanohybrids depends on the shape of the CuO precursors. The strategy enables us to transform single‐crystalline CuO nanosheets into hollow hybrid Cu₂O/polypyrrole nanoframes. The ability to transform CuO and an organic monomer into porous hybrid materials of conducting polymer and Cu₂O with macrosized morphological retention opens up interesting possibilities to create novel nanostructures. Electrochemical examinations show that these porous hybrid Cu₂O/polypyrrole nanostructures exhibit efficient catalytic activity towards oxygen reduction reaction (ORR), excellent methanol tolerance ability, and catalytic stability in alkaline solution, thus making them promising nonprecious‐metal‐based catalysts for ORR in alkaline fuel cells and metal–air batteries.     

Synthesis of Copper-Based Nanostructures in Liquid Environments by Means of a Non-equilibrium Atmospheric Pressure Nanopulsed Plasma Jet

The influence of the liquid composition on the chemical and morphological properties of copper-based nanostructures synthesized by a non-equilibrium atmospheric plasma treatment is investigated and discussed. The synthesis approach is simple and environmentally friendly, employs a non-equilibrium nanopulsed atmospheric pressure plasma jet as a contactless cathode and a Cu foil as immersed anode. The process was studied using four distinct electrolyte solutions composed of distilled water and either NaCl?+?NaOH, NaCl only or NaOH only at two different concentrations, without the addition of any copper salts. CuO crystalline structures with limited impurities (e.g. Cu and Cu(OH)₂ phases) were produced from NaCl?+?NaOH containing solutions, mainly CuO and CuCl₂ structures were synthesized in the electrolyte solution containing only NaCl and no synthesis occurred in solutions containing only NaOH. Both aggregated and dispersed nanostructures were produced in the NaCl?+?NaOH and NaCl containing solutions. Reaction pathways leading to the formation of the nanostructures are proposed and discussed.     

Design,Synthesis, and Antifungal Evaluation of Novel Benzoxazole Derivatives Containing a 1,2,3‐Triazole Moiety

For finding novel bioactive compounds with significant antifungal activities, 17 novel benzoxazole derivatives containing a 1,2,3‐triazole moiety were synthesized by the copper(II) acetylacetonate‐catalyzed cyclization reaction between 2‐aminophenol derivatives and 1H‐1,2,3‐triazole‐4‐carbaldehyde derivatives ( 4a ), which were prepared through three steps using aromatic amine as the starting material. Antifungal activities of the prepared compounds were evaluated against Botrytis cinerea (BC) and Fusarium Verticillium (FV). The test results indicated that compounds 5b , 5c , 5h, and 5n show good inhibitory effects on fungi. The preliminary structure–activity relationship is also discussed.     

聚合物控制CuO纳米盘的液相生长

表面活性剂聚丙烯酰胺（PAM）的控制下,在温和的低温水溶液中,高产率的CuO纳米盘被合成。粉未衍射（XRD）,扫描电镜（SEM）,高分辨透射电子显微（HRTEM）对产物的形貌结构进行表征。研究了不同反应条件如温度、PAM浓度等对产物形貌与尺寸的影响。结果表明,CuO纳米盘为单晶结构,沿着（002）和（110）面生长。PAM对纳米盘的形成起到关键作用。典型的聚合物-晶体作用生长机理用来解释CuO纳米盘的形成。聚合物诱引晶体生长与调控纳米晶自组装将提供了一条有效的路径来合成具有复杂形貌与特殊结构的无机和无机-有机杂化材料。