Energetic Materials Based on the 5‐Azido‐3‐nitro‐1, 2,4‐tri­azolate Anion

This study presents the preparation of 5‐azido‐3‐nitro‐1H‐1, 2,4‐triazole ( 1 ) in both good yield and high purity, starting from commercially available chemicals in a three step synthesis. Furthermore, several metal and nitrogen‐rich salts with sodium ( 3 ), potassium ( 4 ), cesium ( 5 ), silver ( 6 ), lead ( 7 ), ammonium ( 8 ), guanidinium ( 9 ), and aminoguanidinium ( 10 ) were prepared by simple acid‐base reactions. All compounds were well characterized by various means, including vibrational (IR, Raman) and multinuclear (¹H, ¹³C, ¹⁴N, ¹⁵N) NMR spectroscopy, mass spectrometry, and DSC. Additionally the structure of 7 was determined by single‐crystal X‐ray diffraction. The sensitivities towards various outer stimuli (impact, friction, electrostatic discharge) were determined according to BAM standards. The metal salts were tested as potential primary explosives utilizing various preliminary tests.     

‘Click Synthesis’ of 1H‐1,2,3‐Triazolyl‐Based Oxiconazole (=(1Z)‐1‐(2,4‐Dichlorophenyl)‐2‐(1H‐imidazol‐1‐yl)ethanone O‐[(2,4‐Dichlorophenyl)methyl]oxime) Analogs

The ‘click synthesis’ of some oxiconazole analogs 5a – 5v having 1H‐1,2,3‐triazolyl residues by Huisgen cycloaddition was achieved in four steps (Scheme 1). Oximation of phenacyl chloride ( 1 ) followed by azidation of 2‐chloro‐1‐phenylethanone oxime ( 2 ) provided azido ketoxime 3 . The CuI‐catalyzed Huisgen cycloaddition of 3 with terminal alkynes gave the 4‐substituted (at the triazole) 2‐(1H‐1,2,3‐triazol‐1‐yl)‐1‐phenylethanone oximes 4a – 4i . The O‐alkylation of 4a – 4i with various alkyl halides resulted in the formation of the target molecules 5a – 5v in good yields.     

Synthesis and Characterization of Bis(triaminoguanidinium) 5,5′‐Dinitrimino‐3,3′‐azo‐1H‐1,2,4‐triazolate – A Novel Insensitive Energetic Material

The synthesis of 5,5′‐diamino‐3,3′‐azo‐1H‐1,2,4‐triazole ( 3 ) by reaction of 5‐acetylamino‐3‐amino‐1H‐1,2,4‐triazole ( 2 ) with potassium permanganate is described. The application of the very straightforward and efficient acetyl protection of 3,5‐diamino‐1H‐1,2,4‐triazole allows selective reactions of the remaining free amino group to form the azo‐functionality. Compound 3 is used as starting material for the synthesis of 5,5′‐dinitrimino‐3,3′‐azo‐1H‐1,2,4‐triazole ( 4 ), which subsequently reacted with organic bases (ammonia, hydrazine, guanidine, aminoguanidine, triaminoguanidine) to form the corresponding nitrogen‐rich triazolate salts ( 5 – 9 ). All substances were fully characterized by IR and Raman as well as multinuclear NMR spectroscopy, mass spectrometry, and differential scanning calorimetry. Selected compounds were additionally characterized by low temperature single‐crystal X‐ray diffraction measurements. The heats of formation of 4 – 9 were calculated by the CBS‐4M method to be 647.7 ( 4 ), 401.2 ( 5 ), 700.4 ( 6 ), 398.4 ( 7 ), 676.5 ( 8 ), and 1089.2 ( 9 ) kJ · mol^–1. With these values as well as the experimentally determined densities several detonation parameters were calculated using both computer codes EXPLO5.03 and EXPLO5.04. In addition, the sensitivities of 5 – 9 were determined by the BAM drophammer and friction tester as well as a small scale electrical discharge device.     

Synthesis of Amino,Azido, Nitro,and Nitrogen‐Rich Azole‐Substituted Derivatives of 1H‐Benzotriazole for High‐Energy Materials Applications

The amino, azido, nitro, and nitrogen‐rich azole substituted derivatives of 1H‐benzotriazole have been synthesized for energetic material applications. The synthesized compounds were fully characterized by ¹H and ¹³C NMR spectroscopy, IR, MS, and elemental analysis. 5‐Chloro‐4‐nitro‐1H‐benzo[1,2,3]triazole ( 2 ) and 5‐azido‐4,6‐dinitro‐1H‐benzo[1,2,3]triazole ( 7 ) crystallize in the Pca2₁ (orthorhombic) and P2₁/c (monoclinic) space group, respectively, as determined by single‐crystal X‐ray diffraction. Their densities are 1.71 and 1.77 g cm^?3, respectively. The calculated densities of the other compounds range between 1.61 and 1.98 g cm^?3. The detonation velocity (D) values calculated for these synthesized compounds range from 5.45 to 8.06 km s^?1, and the detonation pressure (P) ranges from 12.35 to 28 GPa.     

Photocycloaddition of 2H‐1‐Benzopyran‐3‐carbonitriles and 2H‐1‐Benzothiopyran‐3‐carbonitriles to Alkenes and Alkenynes

Both (intermolecular) photocycloadditions of 2H‐1‐benzopyran‐ and 2H‐1‐benzothiopyran‐3‐carbonitriles to 2,3‐dimethylbut‐2‐ene and 2‐methylbut‐1‐en‐3‐yne, and (intramolecular) photoisomerization of 4‐(alkenyl)benzopyran‐3‐carbonitriles were investigated. In contrast to 2H‐1‐benzopyran‐3‐carbonitrile ( 1 ), its thia analog 4 reacts with 2,3‐dimethylbut‐2‐ene selectively, to afford only cyclobuta derivative 7 . In the presence of 2‐methylbut‐1‐en‐3‐yne, both 1 and 4 behave alike to afford the all‐cis‐cyclobuta diastereoisomers, 15 and 8 , respectively, as main products, as well as minor amounts of cyclobutenes 17 and 10 , respectively, which result from the addition of the terminal C‐atom of the acetylenic bond to C(3) of the heterocycle. 4‐Methyl‐2H‐1‐benzopyran‐3‐carbonitrile ( 5 ) does not undergo photoaddition to the alkene or the alkenyne mentioned above, whereas the corresponding intramolecular [2+2] photocycloaddition of 4‐(pent‐4‐enyl)benzopyran‐3‐carbonitrile ( 6b ) to tetracycle 20 proceeds quantitatively.     

Synthesis and Characterization of Novel 1‐Methyl‐3‐(4‐phenyl‐4H‐1,2,4‐triazol‐3‐yl)‐1H‐indazole Derivatives

A series of novel 1‐methyl‐3‐(4‐phenyl‐4H‐1,2,4‐triazol‐3‐yl)‐1H‐indazoles was synthesized in three steps from 5‐(1‐methyl‐1H‐indazol‐3‐yl)‐4‐phenyl‐2H‐1,2,4‐triazole‐3(4H)‐thiones. 5‐(1‐Methyl‐1H‐indazol‐3‐yl)‐4‐phenyl‐2H‐1,2,4‐triazole‐3(4H)‐thiones were converted into 1‐methyl‐3‐(5‐(methylsulfonyl)‐4‐phenyl‐4H‐1,2,4‐triazol‐3‐yl)‐1H‐indazoles upon methylation followed by treatment with aq. KMnO₄. The reaction of 1‐methyl‐3‐(5‐(methylsulfonyl)‐4‐phenyl‐4H‐1,2,4‐triazol‐3‐yl)‐1H‐indazoles with Raney nickel resulted in desulphonylation to afford corresponding 1‐methyl‐3‐(4‐phenyl‐4H‐1,2,4‐triazol‐3‐yl)‐1H‐indazoles. All the new synthesized compounds were characterized by spectral techniques.     

Studies on the Chemical Transformations of 6‐Methylchromone‐3‐carbonitrile under Nucleophilic Conditions

The chemical reactivity of 6‐methylchromone‐3‐carbonitrile ( 1 ) was studied towards some nucleophilic reagents. Reaction of carbonitrile 1 with malononitrile dimer and N′‐[(4‐methoxyphenyl)methylidene]‐2‐cyanoacetohydrazide ( 5 ) gave the unexpected chromeno[4,3‐b]pyridine 2 and benzoxocine‐3‐carbohydrazide 6 , respectively. Reaction of carbonitrile 1 with 3‐amino‐1,2,4‐triazole, 2‐aminobenzimidazole, 7‐chloro‐4‐hydrazinoquinoline and 3‐hydrazino‐5,6‐diphenyl‐1,2,4‐triazine proceeds via γ‐pyrone ring opening followed by cycloaddition onto the nitrile function leading to a variety of heterocyclic systems. Structures of the new synthesized products were deduced on the basis of their analytical and spectral data.     

Ring Opening and Recyclization Reactions with Chromone‐3‐carbonitrile

Chemical transformations of chromone‐3‐carbonitrile ( 1 ) with some substituted hydrazines, namely, thiosemicarbazide, S‐methyl/benzyldithiocarbazate, 7‐chloro‐4‐hydrazinoquinoline, and 3‐hydrazino‐5,6‐diphenyl‐1,2,4‐triazine, led to substituted pyrazoles 2 , 5 – 8 . Ring opening of carbonitrile 1 followed by recyclization with 3‐amino‐1,2,4‐triazole and 2‐aminobenzimidazole gave triazolo[1,5‐a]pyrimidine 9 and pyrimido[1,2‐a]benzimidazole 10 , respectively. Treatment of carbonitrile 1 with some heterocyclic amines produced 2‐amino‐3‐substituted‐chromones 11 and 12 . The novel 3‐hydroxychromeno[4,3‐b]pyrazolo[4,3‐e]pyridin‐5(1H)‐one ( 13 ) was efficiently synthesized from the ring conversion of carbonitrile 1 with cyanoacetohydrazide. A mixture of chromeno[2,3‐b]naphthyridine 14 and chromeno[4,3‐b]pyridine 15 was obtained from base catalyzed transformation of carbonitrile 1 with malononitrile dimer. A diversity of novel annulated chromeno[2,3‐b]pyridines 16 – 22 was also synthesized. Chromeno[2,3‐b]pyrrole‐2‐carboxylate 23 was obtained from the reaction of carbonitrile 1 with ethyl chloroacetate. Structures of the new synthesized products were deduced on the basis of their analytical and spectral data.     

Synthesis of fluorine containing N‐benzyl‐1,2,3‐triazoles and N‐methyl‐pyrazoles from conjugated alkynes

1, 3‐Dipolar‐cycloaddition reaction of fluoro substituted 3‐aryl‐propynenitriles 1 with benzyl azide 2 afforded the expected 3‐benzyl‐5‐aryl‐3H‐[1,2,3]triazole‐4‐carbonitrile 3 and 1‐benzyl‐5‐aryl‐1H‐[1,2,3]‐triazole‐4‐carbonitrile 4 in good yield. However, 1,3‐dipolar cycloaddition of diazomethane 5 with 3‐aryl‐propynenitriles 1 resulted in the exclusive formation of N‐methyl‐pyrazole derivatives 6 and 7 .     

Synthesis and antimycobacterial activity of alkyl 1‐heteroaryl‐1H‐1,2,3‐triazole‐4‐carboxylates

A series of alkyl l‐heteroaryl‐1H‐1,2,3‐triazole‐4‐carboxylates 6a‐u were synthesised in four steps from methyl (Z)‐2‐benzyloxycarbonylarmino‐3‐(dimethylamino)prop‐2‐enoate ( 1 ) and heterocyclic amines 2a‐s. Triazoles 6a‐o were tested against antimycobacterial activity. For the most active compound, n‐pentyl 1‐(6‐phenylpyridazin‐3‐yl)‐1H‐1,2,3‐triazole‐4‐carboxylate ( 6n ), minimum inhibitory concentration 3.13 μg/ml was determined.     

A series of (E)‐5‐(arylideneamino)‐1‐tert‐butyl‐1H‐pyrrole‐3‐carbonitriles and their reduction products to secondary amines: syntheses and X‐ray structural studies

An efficent access to a series of N‐(pyrrol‐2‐yl)amines, namely (E)‐1‐tert‐butyl‐5‐[(4‐chlorobenzylidene)amino]‐1H‐pyrrole‐3‐carbonitrile, C₁₆H₁₆ClN₃, (7a), (E)‐1‐tert‐butyl‐5‐[(2,4‐dichlorobenzylidene)amino]‐1H‐pyrrole‐3‐carbonitrile, C₁₆H₁₅Cl₂N₃, (7b), (E)‐1‐tert‐butyl‐5‐[(pyridin‐4‐ylmethylene)amino]‐1H‐pyrrole‐3‐carbonitrile, C₁₅H₁₆N₄, (7c), 1‐tert‐butyl‐5‐[(4‐chlorobenzyl)amino]‐1H‐pyrrole‐3‐carbonitrile, C₁₆H₁₈ClN₃, (8a), and 1‐tert‐butyl‐5‐[(2,4‐dichlorobenzyl)amino]‐1H‐pyrrole‐3‐carbonitrile, C₁₆H₁₇Cl₂N₃, (8b), by a two‐step synthesis sequence (solvent‐free condensation and reduction) starting from 5‐amino‐1‐tert‐butyl‐1H‐pyrrole‐3‐carbonitrile is described. The syntheses proceed via isolated N‐(pyrrol‐2‐yl)imines, which are also key synthetic intermediates of other valuable compounds. The crystal structures of the reduced compounds showed a reduction in the symmetry compared with the corresponding precursors, viz. Pbcm to P from compound (7a) to (8a) and P2₁/c to P from compound (7b) to (8b), probably due to a severe change in the molecular conformations, resulting in the loss of planarity observed in the nonreduced compounds. In all of the crystals, the supramolecular assembly is controlled mainly by strong (N,C)—H…N hydrogen bonds. However, in the case of (7a)–(7c), C—H…Cl interactions are strong enough to help in the three‐dimensional architecture, as observed in Hirshfeld surface maps.     

Supramolecular aggregation in three 4‐aryl‐6‐(1H‐indol‐3‐yl)‐3‐methyl‐1‐phenyl‐1H‐pyrazolo[3,4‐b]pyridine‐5‐carbonitriles

Both 6‐(1H‐indol‐3‐yl)‐3‐methyl‐4‐(4‐methylphenyl)‐1‐phenyl‐1H‐pyrazolo[3,4‐b]pyridine‐5‐carbonitrile and 6‐(1H‐indol‐3‐yl)‐3‐methyl‐4‐(4‐methoxyphenyl)‐1‐phenyl‐1H‐pyrazolo[3,4‐b]pyridine‐5‐carbonitrile crystallize from dimethylformamide solutions as stoichiometric 1:1 solvates, viz. C₂₉H₂₁N₅·C₃H₇NO, (I), and C₂₉H₂₁N₅O·C₃H₇NO, (II), respectively; however, 6‐(1H‐indol‐3‐yl)‐3‐methyl‐1‐phenyl‐4‐(3,4,5‐trimethoxyphenyl)‐1H‐pyrazolo[3,4‐b]pyridine‐5‐carbonitrile, C₃₁H₂₅N₅O₃, (III), crystallizes in the unsolvated form. The heterocyclic components of (I) are linked by C—H...π(arene) hydrogen bonds to form cyclic centrosymmetric dimers, from which the solvent molecules are pendent, linked by N—H...O hydrogen bonds. In (II), the heterocyclic components are linked by a combination of C—H...N and C—H...π(arene) hydrogen bonds into chains containing two types of centrosymmetric ring, and the pendent solvent molecules are linked to these chains by N—H...O hydrogen bonds. Molecules of (III) are linked into simple C(12) chains by an N—H...O hydrogen bond, and these chains are weakly linked into pairs by an aromatic π–π stacking interaction.     

On triazoles XLIX. Synthesis of 5,6‐dihydrothiazolo[3,2‐b]‐[1,2,4]triazol‐2‐yl‐, 6,7‐dihydro‐5H‐[1,2,4]triazolo[5,1‐b][1,3]thiazin‐2‐yl‐, and 5,6,7,8‐tetrahydro[1,2,4]triazolo[5,1‐b] [1,3]thiazepin‐2‐yl‐isoquinolinium salts

5′‐Mercapto‐1′H‐1,2,4‐triazol‐3′‐yl‐isoquinolinium salts (6) were synthesised by the reaction of ortho‐acyl phenylacetones (2) or the corresponding pyrylium salts (3) and 5‐amino‐2,3‐dihydro‐1H‐1,2,4‐triazole‐3‐thione (5) . Treatment of thioles 6 withα,ω‐dibromoalkanes led to type 15, 16 and 17 isoquinolinium salts condensed with thiazole, thiazine and thiazepine rings. When 6 are reacted with dibromomethane (10) 11 type dimeric structures are obtained.     

Synthesis and Antimicrobial Activity of N‐Aryl‐4‐(cyano/alkoxycarbonyl)‐5‐(pyridin‐3‐yl)‐1H/3H‐1,2,3‐triazole Derivatives

A convenient synthesis of a new series of N‐aryl‐5‐(pyridin‐3‐yl)‐1H/3H‐1,2,3‐triazole‐4‐carbonitriles and alkyl N‐aryl‐5‐(pyridin‐3‐yl)‐1H/3H‐1,2,3‐triazole‐4‐carboxylic acid esters is reported. The newly synthesized 5‐(pyridin‐3‐yl)‐1,2,3‐triazole derivatives are evaluated for their antibacterial and antifungal activity. Some of these triazole derivatives have exhibited moderate antimicrobial activity.     

The structures of 1,4‐diaryl‐5‐trifluoromethyl‐1H‐1,2,3‐triazoles related to J147, a drug for treating Alzheimer's disease

J147 [N‐(2,4‐dimethylphenyl)‐2,2,2‐trifluoro‐N′‐(3‐methoxybenzylidene)acetohydrazide] has recently been reported as a promising new drug for the treatment of Alzheimer's disease. The X‐ray structures of seven new 1,4‐diaryl‐5‐trifluoromethyl‐1H‐1,2,3‐triazoles, namely 1‐(3,4‐dimethylphenyl)‐4‐phenyl‐5‐trifluoromethyl‐1H‐1,2,3‐triazole (C₁₇H₁₄F₃N₃, 1 ), 1‐(3,4‐dimethylphenyl)‐4‐(3‐methoxyphenyl)‐5‐trifluoromethyl‐1H‐1,2,3‐triazole (C₁₈H₁₆F₃N₃O, 2 ), 1‐(3,4‐dimethylphenyl)‐4‐(4‐methoxyphenyl)‐5‐trifluoromethyl‐1H‐1,2,3‐triazole (C₁₈H₁₆F₃N₃O, 3 ), 1‐(2,4‐dimethylphenyl)‐4‐(4‐methoxyphenyl)‐5‐trifluoromethyl‐1H‐1,2,3‐triazole (C₁₈H₁₆F₃N₃O, 4 ), 1‐[2,4‐bis(trifluoromethyl)phenyl]‐4‐(3‐methoxyphenyl)‐5‐trifluoromethyl‐1H‐1,2,3‐triazole (C₁₈H₁₀F₉N₃O, 5 ), 1‐(3,4‐dimethoxyphenyl)‐4‐(3,4‐dimethoxyphenyl)‐5‐trifluoromethyl‐1H‐1,2,3‐triazole (C₁₉H₁₈F₃N₃O₄, 6 ) and 3‐[4‐(3,4‐dimethoxyphenyl)‐5‐(trifluoromethyl)‐1H‐1,2,3‐triazol‐1‐yl]phenol (C₁₇H₁₄F₃N₃O₃, 7 ), have been determined and compared to that of J147 . B3LYP/6‐311++G(d,p) calculations have been performed to determine the potential surface and molecular electrostatic potential (MEP) of J147 , and to examine the correlation between hydrazone J147 and the 1,2,3‐triazoles, both bearing a CF₃ substituent. Using MEPs, it was found that the minimum‐energy conformation of 4 , which is nearly identical to its X‐ray structure, is closely related to one of the J147 seven minima.     

Synthesis,structure and biological activity studies of 2‐[(1H‐1,2,4‐triazol‐1‐yl)methyl]‐1‐aryl)‐3‐ferrocenyl prop‐2‐en‐1‐one derivatives

Fifteen new ferrocene derivatives containing 1H‐1,2,4‐triazole moiety were synthesized in various yields by the condensation of ferrocenecarboxaldehyde with 1‐aryl‐3‐(1H‐1,2,4‐triazo‐1‐yl)‐propen‐1‐ones in toluene. Their structures have been confirmed by ¹H NMR, IR, MS and elemental analysis. In addition, the crystal structure of 4l was determined. The antifungal and plant growth regulatory activities of the title compounds are discussed. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis and Molecular Structure of New S‐Nucleosides of 5‐(4‐Pyridyl)‐4‐Aryl‐4H‐1,2,4‐Triazole‐3‐Thiols

The synthesis of some new S‐nucleosides of 5‐(4‐pyridyl)‐4‐aryl‐4H‐1,2,4‐triazole‐3‐thiols ( 4a‐n ) is described. Direct glycosylation of ( 4a‐n ) with tetra‐O‐acetyl‐α‐D‐glucopyranosyl bromide in the presence of potassium hydroxide followed by deacetylation using dry ammonia in methanol gave the corresponding 3‐S‐(ñ‐D‐glucopyranosyl)‐5‐(4‐pyridyl)‐4‐aryl‐4H‐1,2,4‐triazoles ( 6a‐n ) in good yields. All the compounds were fully characterized by means of ¹HNMR, ¹³C NMR spectra and elemental analyses. To assist in the interpretation of the spectroscopic data, the crystal structure of 3‐S‐(2′,3′,4′,6′‐tetra‐O‐acetyl‐β‐D‐glucopyranosyl)‐5‐(4‐pyridyl)‐4‐phenyl‐4H‐1,2,4‐triazole ( 5a ) was determined by X‐ray diffraction.     

A simple and efficient synthesis of novel N,N′‐bis (1H‐pyrrol‐1‐yl)‐1‐[2‐(2‐aryl‐5‐methyl‐3‐oxo‐2,4‐dihydro‐3H‐1,2,4‐triazol‐4‐yl)ethyl]‐1H‐1,2,3‐triazole‐4,5‐dicarboxamides

One‐pot reaction of 3‐aryl‐5‐methyl‐1,3,4‐oxadiazolin‐2‐ones 1a‐g with ethanolamine yielded the 4‐(2‐hydroxyethyl)‐2‐aryl‐5‐methyl‐2,4‐dihydro‐3H‐1,2,4‐triazolin‐3‐ones 2a‐g which were converted to the azido compounds 6a‐g . These azides on 1,3‐dipolar cycloaddition with DMAD afforded the dimethyl‐1‐[2‐(2‐aryl‐5‐methyl‐3‐oxo‐1,2,4‐triazol‐4‐yl)ethyl]‐1H‐1,2,3‐triazol‐4,5‐dicarboxylates 7a‐g which on conversion to bishydrazides 8a‐g and further cyclisation with 2,5‐hexanedione afforded the title compounds 9a‐g . This new short route for the so far unkown bis‐(triazolinone‐triazole)ethanes involves mild and convergent 1,3‐dipolar cycloaddition reaction yielding overall good yields of the products.     

New Synthesis of N‐(1H‐pyrazol‐5‐yl)‐hexahydroquinoline‐3‐carbonitrile and octahydropyrazolo[4′,3′:5,6]pyrimido[1,2‐a]quinoline‐6‐carbonitrile Derivatives from the Cyclic β‐Enaminones

A facile and convenient synthesis of an interesting N‐(1H‐pyrazol‐5‐yl)‐hexahydroquinoline‐3‐carbonitrile and octahydropyrazolo[4′,3′:5,6]pyrimido[1,2‐a ]quinoline‐6‐carbonitrile derivatives via the versatile readily accessible cyclic enaminones incorporating pyrazole moiety was accomplished.     

1,3‐Dipolar Cycloaddition Reactions of Organic Azides with Morpholinobuta‐1,3‐dienes and with an α‐Ethynyl‐enamine

The cycloaddition of organic azides with some conjugated enamines of the 2‐amino‐1,3‐diene, 1‐amino‐1,3‐diene, and 2‐aminobut‐1‐en‐3‐yne type is investigated. The 2‐morpholinobuta‐1,3‐diene 1 undergoes regioselective [3+2] cycloaddition with several electrophilic azides RN₃ 2 ( a , R=4‐nitrophenyl; b , R=ethoxycarbonyl; c , R=tosyl; d , R=phenyl) to form 5‐alkenyl‐4,5‐dihydro‐5‐morpholino‐1H‐1,2,3‐triazoles 3 which are transformed into 1,5‐disubstituted 1H‐triazoles 4a , d or α,β‐unsaturated carboximidamide 5 (Scheme 1). The cycloaddition reaction of 4‐[(1E,3Z)‐3‐morpholino‐4‐phenylbuta‐1,3‐dienyl]morpholine ( 7 ) with azide 2a occurs at the less‐substituted enamine function and yields the 4‐(1‐morpholino‐2‐phenylethenyl)‐1H‐1,2,3‐triazole 8 (Scheme 2). The 1,3‐dipolar cycloaddition reaction of azides 2a – d with 4‐(1‐methylene‐3‐phenylprop‐2‐ynyl)morpholine ( 9 ) is accelerated at high pressure (ca. 7–10 kbar) and gives 1,5‐disubstituted dihydro‐1H‐triazoles 10a , b and 1‐phenyl‐5‐(phenylethynyl)‐1H‐1,2,3‐triazole ( 11d ) in significantly improved yields (Schemes 3 and 4). The formation of 11d is also facilitated in the presence of an equimolar quantity of tBuOH. The three‐component reaction between enamine 9 , phenyl azide, and phenol affords the 5‐(2‐phenoxy‐2‐phenylethenyl)‐1H‐1,2,3‐triazole 14d .