Enhanced Charge Separation Efficiency in Pyridine‐Anchored Phthalocyanine‐Sensitized Solar Cells by Linker Elongation

A series of zinc phthalocyanine sensitizers ( PcS22 – 24 ) having a pyridine anchoring group are designed and synthesized to investigate the structural dependence on performance in dye‐sensitized solar cells. The pyridine‐anchor zinc phthalocyanine sensitizer PcS23 shows 79 % incident‐photon to current‐conversion efficiency (IPCE) and 6.1 % energy conversion efficiency, which are comparable with similar phthalocyanine dyes having a carboxylic acid anchoring group. Based on DFT calculations, the high IPCE is attributed with the mixture of an excited‐state molecular orbital of the sensitizer and the orbitals of TiO₂. Between pyridine and carboxylic acid anchor dyes, opposite trends are observed in the linker‐length dependence of the IPCE. The red‐absorbing PcS23 is applied for co‐sensitization with a carboxyl‐anchor organic dye D131 that has a complementary spectral response. The site‐selective adsorption of PcS23 and D131 on the TiO₂ surface results in a panchromatic photocurrent response for the whole visible‐light region of sun light.     

Molecular Design Rule of Phthalocyanine Dyes for Highly Efficient Near‐IR Performance in Dye‐Sensitized Solar Cells

A series of zinc–phthalocyanine sensitizers ( PcS16 – 18 ) with different adsorption sites have been designed and synthesized in order to investigate the dependence of adsorption‐site structures on the solar‐cell performances in zinc–phthalocyanine based dye‐sensitized solar cells. The change of adsorption site affected the electron injection efficiency from the photoexcited dye into the nanocrystalline TiO₂ semiconductor, as monitored by picosecond time‐resolved fluorescence spectroscopy. The zinc–phthalocyanine sensitizer PcS18 , possessing one carboxylic acid directly attached to the ZnPc ring and six 2,6‐diisopropylphenoxy units, showed a record power conversion efficiency value of 5.9 % when used as a light‐harvesting dye on a TiO₂ electrode under one simulated solar condition.     

Synthesis,solid‐state,and charge‐transport properties of conjugated polythiophene‐S,S‐dioxides

An alkylated semiconducting polymer comprising alternating bithiophene‐[all]‐S,S‐dioxide and aromatic monothiophene units in the polymer backbone was synthesized with the intent of modifying the energy gap and lowest unoccupied molecular orbital for use as a stable n‐type semiconductor. Films spun from this semiconducting polymer were characterized utilizing X‐ray scattering, near edge X‐ray absorption fine structure spectroscopy, ultraviolet photoelectron spectroscopy, and thin‐film field effect transistors to determine how oxidation of the thiophene ring systems impacts the structural and electronic properties of the polymer. The thiophene‐S,S‐dioxide polymers have lower optical and electrical band gaps than corresponding thiophene polymers. X‐ray scattering results indicate that the polymers are well ordered with the π–π stacking distances increased by 0.4 Å relative to analogous thiophene polymers. The electrical stability of these polymers is poor in transistors with a drop in the field effect mobility by approximately one order of magnitude upon addition of just 5% of the thiophene‐S,S‐dioxide unit in a copolymer with thiophene. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Flexible Tuning of Unsaturated β‐Substituents on Zn Porphyrins: A Synthetic,Spectroscopic and Computational Study

A series of zinc porphyrins substituted at adjacent β‐positions with a CN group and para‐substituted ethenyl/ethynyl‐phenyl group have been studied using electronic absorption spectroscopy, resonance Raman spectroscopy and DFT calculations. The oxidative nucleophilic substitution of hydrogen was utilized for the introduction of a cyano substituent on the porphyrin ring. This modification has a remarkable electronic effect on the ring. The resulting porphyrin cyanoaldehyde was further modified in Wittig condensations to give series of arylalkene‐ and arylalkyne‐substituted derivatives. This substitution pattern caused significant redshifting and broadening of the B band, tuning from 433–446 nm. Additionally the Q/B band intensity ratios show much higher values than observed for the parent porphyrin ZnTPP (0.20 vs. 0.03). Careful analysis of the electronic transitions using DFT and resonance Raman spectroscopy reveal that the substituent does not significantly perturb the electronic structure of the porphyrin core, which is still well described by Gouterman’s four‐orbital model. However, the substituents do play a role in elongating the conjugation length and this results in the observed spectral changes.     

Synthesis and characterization of thieno[3,2‐b]thiophene‐isoindigo‐based copolymers as electron donor and hole transport materials for bulk‐heterojunction polymer solar cells

A novel class of thieno[3,2‐b]thiophene (TT) and isoindigo based copolymers were synthesized and evaluated as electron donor and hole transport materials in bulk‐heterojunction polymer solar cells (BHJ PSCs). These π‐conjugated donor‐acceptor polymers were derived from fused TT and isoindigo structures bridged by thiophene units. The band‐gaps and the highest occupied molecular orbital (HOMO) levels of the polymers were tuned using different conjugating lengths of thiophene units on the main chains, providing band‐gaps from 1.55 to 1.91 eV and HOMO levels from ?5.34 to ?5.71 eV, respectively. The corresponding lowest unoccupied molecular orbital (LUMO) levels were appropriately adjusted with the isoindigo units. Conventional BHJ PSCs (ITO/PEDOT:PSS/active layer/interlayer/Al) with an active layer composed of the polymer and PC₇₁BM were fabricated for evaluation. Power conversion efficiency from a low of 1.25% to a high of 4.69% were achieved with the best performing device provided by the D?π?A polymer with a relatively board absorption spectrum, high absorption coefficient, and more uniform blend morphology. These results demonstrate the potential of this class of thieno[3,2‐b]thiophene‐isoindigo‐based polymers as efficient electron donor and hole transport polymers for BHJ PSCs. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Regioselective grignard metathesis reaction of 2,5‐dibromo‐3‐(6′‐hexylpyridine‐2′‐yl)thiophene and kumada coupling polymerization

2,5‐Dibromo‐3‐(6′‐hexylpyridine‐2′‐yl)thiophene ( DBPyTh ) was synthesized by the Suzuki coupling reaction between two aromatic compounds followed by the bromination. The Grignard metathesis reaction of DBPyTh with isopropylmagnesium chloride proceeded in 85% conversion and the regioselective halogen–metal exchange at the 2‐position was confirmed. Namely, 5‐bromo‐2‐chloromagnesio‐3‐(6′‐hexylpyridine‐2′‐yl)thiophene and 2‐bromo‐5‐chloromagnesio‐3‐(6′‐hexylpyridine‐2′‐yl)thiophene were generated in 90:10 molar ratio. Subsequently, the Kumada coupling polymerization was carried out using 1,3‐bis(diphenylphosphinopropane)nickel(II) dichloride to obtain poly(3‐(6′‐hexylpyridine‐2′‐yl)thiophene) ( PolyPyTh ). The polymer molecular weight could be roughly controlled by the catalyst concentration and the molecular weight distribution ranged from 1.25 to 1.80. The gas chromatograph analysis indicated that 5‐bromo‐2‐chloromagnesio‐3‐(6′‐hexylpyridine‐2′‐yl)thiophene was preferentially polymerized in 90% conversion and the percentage of the head‐to‐tail content (regioregularity) was calculated to be 96%. The matrix‐assisted laser desorption/ionization time‐of‐fright mass spectrum indicated that both polymer chain ends were substituted with the hydrogen atom. The absorption maxima of polymer in CHCl₃ and thin film were observed at 447 and 457 nm, respectively, which were blue‐shifted compared with poly(3‐(4′‐octylphenyl)thiophene). From the CV measurement of the polymer thin film, highest occupied molecular orbital (HOMO) (?5.31 eV) and lowest unoccupied molecular orbital (LUMO) (?3.76 eV) energy levels were calculated from the oxidation and reduction onset potentials, respectively, and the electrochemical band gap energy was determined to be 1.62 eV. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Low Band Gap Donor–Acceptor Conjugated Systems Based on 3‐Alkoxy or 3‐Pyrrolidino‐4‐cyanothiophene and Benzothiadiazole Units

3‐Hexyloxy‐4‐cyanothiophene, 3‐pyrrolidil‐4‐cyanothiophene, and 3,4‐ethylenedioxythiophene (EDOT) units are used with benzothiadiazole as building blocks for the development of three new conjugated donor–acceptor–donor (DAD) derivatives. The DAD molecules have the central acceptor part, which is formed by combining electron‐withdrawing cyano groups and the benzothiadiazole moiety, in common. Theoretical calculations and UV/Vis and electrochemical data reveal the key role of the end‐capped donor to tune the electronic properties of the derivatives. A study of the electropolymerization process of the three derivatives shows the strong influence of the donor parts on both the reactivity of the precursors and the electronic properties of the resulting polymers. Derivatives end‐capped with pyrrolidinocyano thiophene or EDOT units lead to films of polymers presenting low band gaps of around 0.9–1.4 eV. Upon oxidation, the two polymers present different behavior. In the presence of the pyrrolidinocyano thiophene moieties, oxidation leads to a blueshift of the absorption bands, whereas with EDOT units a classical redshift, giving high absorption in the near‐IR region, is observed for the oxidized states.     

3,6‐Dialkylthieno[3,2‐b]thiophene moiety as a soluble and electron donating unit preserving the coplanarity of photovoltaic low band gap copolymers

It has been shown recently, that the presence of alkyl side chains at the 3‐positions on the thiophene rings placed next to 2,1,3‐benzothiadiazole core in the backbone of several conjugated polymers results in severe steric hindrance and prevents efficient planarity of the thiophene‐2,1,3‐benzothiadiazole‐thiophene (TBzT) segment. Both properties have a strong influence on the optoelectronic properties of the polymer and need to be considered when the polymer is to be used for organic electronics applications. In this work, we modified a previously synthesized oligothiophene copolymer, consisting of two 3,4′‐dialkyl‐2,2′‐bithiophene units attached to a 2,1,3‐benzothiadiazole unit (TBzT segment) and a thieno[3,2‐b]thiophene unit, by optimizing the lateral alkyl side chains following a density functional theory investigation. It is demonstrated that eliminating the alkyl side chains from the 3‐positions of the TBzT segment and anchoring them onto the thieno[3,2‐b]thiophene, using an efficient synthesis of the 3,6‐dihexylthieno[3,2‐b]thiophene unit, allows us to reduce the energy band gap. In addition, the chemical modification leads to a better charge transport and to an enhanced photovoltaic efficiency of polymer/fullerene blends. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Improvement of TiO2/Dye/Electrolyte Interface Conditions by Positional Change of Alkyl Chains in Modified Panchromatic Ru Complex Dyes

A series of panchromatic ruthenium sensitizers ( MJ sensitizers) with attached thiophene and phenyl units bearing alkyl chains was synthesized. A new synthetic route was used to examine all possible positions for the alkyl chains. The absorption spectra showed the sum of a ruthenium complex and peripheral organic chromophore units. The hypochromic effect and blueshift of the metal‐to‐ligand charge‐transfer band observed in the modified ruthenium sensitizers were suppressed by changing the positions of the alkyl chains on the attached thiophene ring. Changing only one alkyl chain also influenced the performance of dye‐sensitized solar cells. Ruthenium sensitizer MJ‐10 with bulky substituent harvests visible and near‐infrared light, and solar cells sensitized by MJ‐10 exhibit an efficiency of 9.1 % under 1 sun irradiation.     

Synthesis and Spectroscopic Properties of Phthalocyanine–[60]Fullerene Conjugates Connected Directly by Means of a Four‐Membered Ring

New covalently C₆₀‐conjugated phthalocyanine (Pc) analogues in which the Pc and C₆₀ components are connected by means of a four‐membered ring have been synthesized by taking advantage of a [2+2] cycloaddition reaction of C₆₀ with benzyne units generated from either a phthalocyanine derivative ( 8 ) or its precursor ( 1 ). The reaction of 1 with PhI(OAc)₂ and trifluoromethanesulfonic acid (TfOH) followed by the [2+2] cycloaddition of C₆₀ in the presence of tetra‐n‐butylammonium fluoride (TBAF) yielded the C₆₀‐substituted Pc precursor ( 3 ). Mixed condensation of 3 and 4,5‐dibutylsulfonylphthalonitrile ( 4 ) in a thermally promoted template reaction using a nickel salt successfully gave the Pc–C₆₀ conjugate ( 5 ). Results of mass spectrometry and ¹H and ¹³C NMR spectroscopy clearly indicate the formation of the anticipated Pc–C₆₀ conjugate. Direct coupling of C₆₀ with the Pc analogue that contained eight peripheral trimethylsilyl (TMS) groups ( 8 ) also proceeded successfully, such that mono and bis C₆₀‐adducts were detected by their mass, although the isolation of each derivative was difficult. The absorption and magnetic circular dichroism (MCD) spectra of 5 and the reference compound ( 7 ) differ from each other in the Q‐band region, thereby suggesting that the presence of the C₆₀ moiety affects the electronic structure of the conjugate. The reduction and oxidation potentials of 5 and 7 obtained by cyclic voltammetry are comparative, except for the C₆₀‐centered reduction couple at ?1.53 V versus Fc⁺/Fc in o‐dichlorobenzene (o‐DCB). A one‐electron reduction of 5 and 7 in tetrahydrofuran (THF) by using the sodium mirror technique results in the loss of band intensity in the Q‐band region, whereas the characteristic marker bands for Pc‐ring‐centered reduction appear at around 430, 600, and 900 nm for both compounds. The final spectral shapes of 5 and 7 upon the reduction resemble each other, thus indicating that no significant molecular orbital (MO) interactions between the C₆₀ and Pc units are present for the reduced species of 5 . In contrast, the oxidized species of 5 and 7 generated by the addition of NOBF₄ in CH₂Cl₂ show significantly different absorption spectra from each other. Whereas the broad bands at approximately 400–550 nm of 7 ⁺ are indicative of the cationic π‐radical species of metallo‐Pcs and can be assigned to a transition from a low‐lying MO to the half‐filled MO, no corresponding bands were observed for 5 ⁺. These spectral characteristics have been tentatively assigned to the delocalized occupied frontier MOs for 5 ⁺. The experimental results are broadly supported by DFT calculations.     

Spectral Properties of Fluorogenic Thiophene‐derived Triarylmethane Dyes

Spectral properties and fluorogenic behaviors of five novel thiophene variants of malachite green (MG), termed MGTs, were determined. Appreciable changes as a function of homologation and substitution pattern, including absorption band positions and intensities and fluorescence quantum yields were observed. In particular, the shorter wavelength y‐band absorption was found to shift over a nearly 200 nm range based on aryl group variation, allowing fine‐tuning of the excitation wavelength for these dyes. In addition, the fluorescence intensity of some MGTs increased significantly (up to 4600‐fold) when the dye was bound to a cognate protein partner, which is potentially useful for cell imaging studies.     

Triplication of the Photocurrent in Dye Solar Cells by Increasing the Elongation of the π‐conjugation in Zn‐Porphyrin Sensitizers

Porphyrins are promising sensitizers for dye solar cells (DSCs) but narrow absorption bands at 400–450 and 500–650 nm limit their light‐harvesting properties. Increasing elongation of the π‐conjugation and loss of symmetry causes broadening and a red‐shift of the absorption bands, which considerably improves the performance of the DSC. Herein we use an oligothienylenevinylene to bridge a Zn‐porphyrin system and the anchoring group of the sensitizer. We separately study the performance of the two basic units: oligothienylenevinylene and Zn‐porphyrin. The combined system provides a three‐fold enhancement of the photocurrent with respect to parent dyes. This is caused by an additional strong absorption in the region 400–650 nm that leads to flat IPCE of 60 %. Theoretical calculations support that the addition of the oligothienylenevinylene unit as a linking bridge creates a charge transfer band that transforms a Zn‐porphyrin dye into a push–pull type system with highly efficient charge injection properties.     

Controlling the directionality of charge transfer in phthalocyaninato zinc sensitizer for a dye-sensitized solar cell: density functional theory studies

Density functional theory (DFT) calculation on the molecular structures, charge distribution, molecular orbitals, electronic absorption spectra of a series of eight unsymmetrical phthalocyaninato zinc complexes with one peripheral (E)-2-cyano-3-(5-vinylthiophen-2-yl) acrylic acid substituent at 2 or 3 position as an electron-withdrawing group and a different number of electron-donating amino groups at the remaining peripheral positions (9, 10, 16, 17, 23, 24) of the phthalocyanine ring, namely ZnPc-β-A, ZnPc-β-A-I-NH(2), ZnPc-β-A-II-NH(2), ZnPc-β-A-III-NH(2), ZnPc-β-A-I,II-NH(2), ZnPc-β-A-I,III-NH(2), ZnPc-β-A-II,III-NH(2), and ZnPc-β-A-I,II,III-NH(2), reveals the effects of amino groups on the charge transfer properties of these phthalocyanine derivatives with a typical D-π-A electronic structure. The introduction of amino groups was revealed altering of the atomic charge distribution, lifting the frontier molecular orbital level, red-shift of the near-IR bands in the electronic absorption spectra, and finally resulting in enhanced charge transfer directionality for the phthalocyanine compounds. Along with the increase of the peripheral amino groups at the phthalocyanine ring from 0, 2, 4, to 6, the dihedral angle between the phthalocyanine ring and the average plane of the (E)-2-cyano-3-(5-vinylthiophen-2-yl) acrylic acid substituent increases from 0 to 3.3° in an irregular manner. This is in good contrast to the regular and significant change in the charge distribution, destabilization of frontier orbital energies, and red shift of near-IR bands of phthalocyanine compounds along the same order. In addition, comparative studies indicate the smaller effect of incorporating two amino groups onto the 16 and 17 than on 9 and 10 or 23 and 24 peripheral positions of the phthalocyanine ring onto the aforementioned electronic properties, suggesting the least effect on tuning the charge transfer property of the phthalocyanine compound via introducing two electron-donating amino groups onto the 16 and 17 peripheral positions. As expected, compound ZnPc-β-A-I,III-NH(2) with four amino groups at 9, 10, 23, and 24 positions of the phthalocyanine ring shows the best charge transfer directionality among the three phthalocyaninato zinc complexes with four peripheral amino groups.     

Fluoride Sensing by Catechol‐Based π‐Electron Systems

We have developed new catechol‐based sensors that can detect fluoride via fluorescence or optical absorption even in the presence of other halides. The level and sensitivity of detection of the sensing molecules is dependent on the chromophore length, which is controlled by the number of thiophene units (one to three) within the chromophore. The sensor with three thiophene units, (E)‐2‐(2,2′‐terthiophen‐5‐yl)‐3‐(3,4‐dihydroxyphenyl)acrylonitrile, gives the best response to fluoride. By using fluorescence measurements fluoride is detectable over the concentration range 1.7 μM to 200 μM . Importantly, when adsorbed onto a solid support the fluorescent catechol dye can be used to detect the presence of fluoride in aqueous solution.     

Theoretical studies on triaryamine‐based p‐type D‐D‐π‐A sensitizer

Development of triaryamine‐based nonmetallic dye sensitizers is a hot topic in the solar cell research. A series of triaryamine‐based dyes WS1 – WS7 were designed with W1 as the prototype. Density functional theory (DFT) and time‐dependent‐DFT calculations were used to investigate the effects of the attached donor D on the absorption spectra and electronic properties of the dyes. The light‐harvesting efficiency (LHE), hole injection force (ΔG_inj), dye regeneration force (ΔG_reg), and charge recombination force (ΔG_CR) for all the dyes were predicted. The insertion of D not only results in a red shift in the absorption spectra for all dyes but also achieves a broader absorption for visible light. Compared with that of the prototype, the absorption peak of the dye WS7 has a red shift of 95 nm and an oscillator strength increase of 29%. The absorption peak of WS7 is wider and stronger, and the absorption range extends to 900 nm. The LHE and ΔG_reg values of WS7 are 0.991 and ?1.49 eV, respectively. On overall evaluation, WS7 is a promising candidate of a p‐type dye sensitizer with good light absorption and dye regeneration efficiency.     

Synthesis and Characterization of Diketopyrrolopyrrole‐based D‐π‐A‐π‐D Small Molecules for Organic Solar Cell Applications

Four new small molecules – CTDP , BCTDP , CFDP , and BCFDP having D‐π‐A‐π‐D molecular architecture, possessing carbazole and benzocarbazole as electron donors, diketopyrrolopyrrole core as acceptor and thiophene/furan acting as spacer/bridge between donor (carbazole and benzocarbazole) and acceptor (diketopyrrolopyrrole) units are synthesized. All the four compounds exhibited absorption in the range of 300 to 700 nm, and, in particular, more intense absorption found in the 500 to 660 nm region. The estimated band gaps are found to be 1.92 eV for CTDP, 1.92 eV for BCTDP, 1.94 eV for CFDP, and 1.92 eV for BCFDP from their intersection point of absorption and emission spectra. The electrochemical studies revealed that the highest occupied molecular orbital/lowest unoccupied molecular orbital energy levels of all the four compounds, CTDP (−5.03/−3.65 eV), BCTDP (−5.03/−3.65 eV), CFDP (−4.94/−3.65 eV), and BCFDP (−4.90/−3.62 eV) are well matched with PCBM and expected to be act as donor materials in small molecule bulk hetero junction organic solar cells. All the compounds are thermally stable up to 382–416°C.     

Electronic structure and optical properties of poly[3‐(4‐octylphenoxy)thiophene]: Experimental and theoretical studies

This article reports the synthesis and characterization of a new polythiophene derivative phenoxy‐substituted, the poly[3‐(4‐octylphenoxy)thiophene] (POPOT). The oxidative polymerization was found to yield low molecular weight material, whereas a modified Grignard metathesis (GRIM) yielded polymers of high molecular weights. One‐ and two‐dimensional NMR indicated the latter to be highly regioregular. POPOTs exhibited higher thermal stabilities than equivalent alkoxy‐substituted polythiophenes and exhibited red shifts in the absorption spectra with respect to equivalent. The absorption spectra showed a red shifted λ_max at 540 nm in tetrahydrofuran solutions and 580 nm in spin‐coated films, with respect to poly(3‐alkylthiophene)s. A further red shift of 40 nm in going from solution (540 nm) to solid states (580 nm) is correlated with results from density functional theory electronic structure calculations. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7505–7516, 2008     

Dye‐sensitized solar cells based on zinc(II) phthalocyanines bearing 3‐pyridin‐3‐ylpropoxy anchoring groups

In this study, nonperipherally tetra‐substituted ( 2 ), peripherally tetra‐substituted ( 3 ), and peripherally octa‐substituted ( 4 ) zinc(II) phthalocyanines were synthesized as sensitizers for dye‐sensitized solar cells (DSSCs) in which 3‐pyridin‐3‐ylpropoxy substituent acts as anchoring unit to bind TiO₂ surface. The optical results indicated that there is an interaction between the dyes and the TiO₂ surface. The photovoltaic performances of the DSSCs based on these dyes were found to depend on both the position and number of the substituents. Despite the more red‐shifted absorption, the DSSC based on 2 showed the conversion efficiency of 0.68%, which is lower than 1.36% and 0.92% for 3 and 4 , respectively, under one sun (AM 1.5G). The vertical orientation of the dye on TiO₂ surface could be the main reason for the higher photovoltaic performance of complex 3 , which is beneficial for not only injecting the electrons into the conduction band of TiO₂ but also reducing the charge recombination. Overall, these results demonstrate that the peripherally tetra‐substituted 3‐pyridin‐3‐ylpropoxy zinc(II) phthalocyanine complex ( 3 ) as a sensitizer can more efficiently utilize the photons in the red/near‐infrared region with respect to the other complexes studied.     

A Triphenylamine‐Based Conjugated Polymer with Donor‐π‐Acceptor Architecture as Organic Sensitizer for Dye‐Sensitized Solar Cells

A conjugated polymer containing an electron donating backbone (triphenylamine) and an electron accepting side chain (cyanoacetic acid) with conjugated thiophene units as the linkers has been synthesized. Dye‐sensitized solar cells (DSSCs) are fabricated utilizing this material as the dye sensitizer, resulting a typical power conversion efficiency of 3.39% under AM 1.5 G illumination, which represents the highest efficiency for polymer dye‐sensitized DSSCs reported so far. The results show the good promise of conjugated polymers as sensitizers for DSSC applications.

     

Quadrupolar Cyclopenta[hi]aceanthrylene‐Based Electron Donor‐Acceptor‐Donor Conjugates: Charge Transfer versus Charge Separation

Cyclopenta[hi]aceanthrylenes (CPAs) have been functionalized at two of the peripheral positions with electronically inert trimethylsilylethynyl ( 1 ), as well as with electron‐donating 4‐ethynyl‐N,N‐dimethylaniline ( 2 ), ethynyl Zn^IIphthalocyanine ( 3 ), and ethynyl Zn^IIporphyrin ( 4 ) units. Consistent with X‐ray crystal structures of 2 and 4 , analyses of absorption and fluorescence of 2 – 4 point to strong electronic communication between the CPA and the peripheral units, affording quadrupolar electron donor‐acceptor‐donor charge‐transfer conjugates. By virtue of their quadrupolar/dipolar charge‐transfer characters in the excited state, 2 – 4 exhibit fluoro‐solvatochromism. Transient absorption spectroscopy confirmed delocalized quadrupolar ground states and formation of weakly solvent stabilized quadrupolar singlet excited states. The latter transform into strongly stabilized dipolar excited states before deactivating to the ground state in 2 and give rise to a fully charge separated state in 3 and 4 .