From Dark to Light to Fluorescence Resonance Energy Transfer (FRET): Polarity‐Sensitive Aggregation‐Induced Emission (AIE)‐Active Tetraphenylethene‐Fused BODIPY Dyes with a Very Large Pseudo‐Stokes Shift

The work presented herein is devoted to the fabrication of large Stokes shift dyes in both organic and aqueous media by combining dark resonance energy transfer (DRET) and fluorescence resonance energy transfer (FRET) in one donor–acceptor system. In this respect, a series of donor–acceptor architectures of 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) dyes substituted by one, two, or three tetraphenylethene (TPE) luminogens were designed and synthesised. The photophysical properties of these three chromophore systems were studied to provide insight into the nature of donor–acceptor interactions in both THF and aqueous media. Because the generation of emissive TPE donor(s) is strongly polarity dependent, due to its aggregation‐induced emission (AIE) feature, one might expect the formation of appreciable fluorescence emission intensity with a very large pseudo‐Stokes shift in aqueous media when considering FRET process. Interestingly, similar results were also recorded in THF for the chromophore systems, although the TPE fragment(s) of the dyes are non‐emissive. The explanation for this photophysical behaviour lies in the DRET. This is the first report on combining two energy‐transfer processes, namely, FRET and DRET, in one polarity‐sensitive donor–acceptor pair system. The accuracy of the dark‐emissive donor property of the TPE luminogen is also presented for the first time as a new feature for AIE phenomena.     

Extended Fluorochromism of Anthracene Trimers with a meta‐Substituted Triphenylamine or Triphenylphosphine Core

Combining meta‐triphenylamine or triphenylphosphine with three anthracene fluorophores gives rise to fluorescent non‐planar triskelions 1 and 2 . The emissive properties of 1 are highly solvatochromic, yielding blue to pale green and even pale yellow fluorescence, whereas the blue emission of 2 is solvent‐insensitive. Anthracene trimers 1 and 2 are both emissive in the solid state, displaying yellow and pale green fluorescence, respectively, with moderate quantum yields.     

Bioorthogonal Turn‐On Probe Based on Aggregation‐Induced Emission Characteristics for Cancer Cell Imaging and Ablation

Bioorthogonal turn‐on probes have been widely utilized in visualizing various biological processes. Most of the currently available bioorthogonal turn‐on probes are blue or green emissive fluorophores with azide or tetrazine as functional groups. Herein, we present an alternative strategy of designing bioorthogonal turn‐on probes based on red‐emissive fluorogens with aggregation‐induced emission characteristics (AIEgens). The probe is water soluble and non‐fluorescent due to the dissipation of energy through free molecular motion of the AIEgen, but the fluorescence is immediately turned on upon click reaction with azide‐functionalized glycans on cancer cell surface. The fluorescence turn‐on is ascribed to the restriction of molecular motion of AIEgen, which populates the radiative decay channel. Moreover, the AIEgen can generate reactive oxygen species (ROS) upon visible light (λ=400–700 nm) irradiation, demonstrating its dual role as an imaging and phototherapeutic agent.     

OLED and PLED Devices Employing Electrogenerated,Intramolecular Charge‐Transfer Fluorescence

The light generating mechanism of a series of light emitting diodes with electron donor–bridge–acceptor systems (D–b–A) as the emitting species was examined by constructing model diodes based on small organic molecules (OLEDs) as well as on molecularly doped electroactive (poly‐N‐vinylcarbazole, PVK) and insulating (polystyrene, PS) polymers (PLEDs). The direct electrogeneration of an intramolecular charge‐transfer (CT) fluorescence of the donor–bridge–acceptor systems occurred readily in OLED devices with a D–b–A system as the emissive layer. In diodes with PS as the host matrix, hole‐injection and electron‐injection occurred directly in the D–b–A molecules residing close to the anode and the cathode, respectively. In the PVK diodes, hole‐injection occurred primarily into PVK and the positive charge carrier was subsequently trapped on the D–b–A molecule, whereas electron‐injection at the cathode side occurred directly into the D–b–A molecules. Charge‐hopping between neighboring molecules then occurred until a hole and electron resided on the same molecule, which is equivalent to the formation of the CT excited state, and which finally relaxed by intramolecular charge recombination under the emission of CT fluorescence.     

Construction of Highly Emissive Pt(II) Metallacycles upon Irradiation

Photoswitchable or photoactivatable fluorescent species have been found wide applications within supramolecular chemistry and materials science. In this study, we successfully constructed two highly emissive Pt(II) metallacycles from the diarylethene ligands via coordination‐driven self‐assembly. Different from the most known fluorescent metallacycles, the obtained metallacycles have displayed “turn‐on” fluorescence switching. They are non‐fluorescent in solution, but they emit highly yellow or orange fluorescence under ultraviolet irradiation. The metallacycles were well characterized by ¹H NMR, ³¹P NMR and ESI‐TOF‐MS. The photochromic properties of the resultant metallacycles were investigated by ¹H NMR, ³¹P NMR, UV/Vis spectrum and fluorescence spectrum. Notably, NMR studies revealed that these two metallacycles featured excellent cyclization efficiency (90% conversion efficiency). Moreover, the closed‐ring isomers of the metallacycles displayed relatively high quantum yield (Φ_F = 0.5). DFT simulations demonstrated that the antiparallel configuration of the diarylethene ligand had an angle closed to 120°, which was more stable in energy compared to the parallel configuration, thus allowing for the facile construction of highly emissive metallacycles. We believe that such highly emissive metallacycles which are in‐situ prepared upon irradiation can be used as new fluorescence materials for sensing and bioimaging in the future.     

A Membrane Tension-Responsive Mechanosensitive DNA Nanomachine

Membrane curvature reflects physical forces operating on the lipid membrane, which plays important roles in cellular processes. Here, we design a mechanosensitive DNA (MSD) nanomachine that mimics natural mechanosensitive PIEZO channels to convert the membrane tension changes of lipid vesicles with different sizes into fluorescence signals in real time. The MSD nanomachine consists of an archetypical six-helix-bundle DNA nanopore, cholesterol-based membrane anchors, and a solvatochromic fluorophore, spiropyran (SP). We find that the DNA nanopore effectively amplifies subtle variations of the membrane tension, which effectively induces the isomerization of weakly emissive SP into highly emissive merocyanine isomers for visualizing membrane tension changes. By measuring the membrane tension via the fluorescence of MSD nanomachine, we establish the correlation between the membrane tension and the curvature that follows the Young-Laplace equation. This DNA nanotechnology-enabled strategy opens new routes to studying membrane mechanics in physiological and pathological settings.     

Development of Photoactivated Fluorescent N‐Hydroxyoxindoles and Their Application for Cell‐Selective Imaging

Photoactivatable fluorophores are essential tools for studying the dynamic molecular interactions within important biological systems with high spatiotemporal resolution. However, currently developed photoactivatable fluorophores based on conventional dyes have several limitations including reduced photoactivation efficiency, cytotoxicity, large molecular size, and complicated organic synthesis. To overcome these challenges, we herein report a class of photoactivatable fluorescent N‐hydroxyoxindoles formed through the intramolecular photocyclization of substituted o‐nitrophenyl ethanol (ONPE). These oxindole fluorophores afford excellent photoactivation efficiency with ultra‐high fluorescence enhancement (up to 800‐fold) and are small in size. Furthermore, the oxindole derivatives show exceptional biocompatibility by generating water as the only photolytic side product. Moreover, structure–activity relationship analysis clearly revealed the strong correlation between the fluorescent properties and the substituent groups, which can serve as a guideline for the further development of ONPE‐based fluorescent probes with desired photophysical and biological properties. As a proof‐of‐concept, we demonstrated the capability of a new substituted ONPE that has an uncaging wavelength of 365–405 nm and an excitation/emission at 515 and 620 nm, for the selective imaging of a cancer cell line (Hela cells) and a human neural stem cell line (hNSCs).     

Supramolecular Assemblies with Near‐Infrared Emission Mediated in Two Stages by Cucurbituril and Amphiphilic Calixarene for Lysosome‐Targeted Cell Imaging

A two‐stage mediated near‐infrared (NIR) emissive supramolecular assembly for lysosome‐targeted cell imaging is presented. 4,4′‐Anthracene‐9,10‐diylbis(ethene‐2,1‐diyl))bis(1‐ethylpyridin‐1‐ium) bromide (ENDT) was synthesized as an organic dye with weak fluorescence emission at 625 nm. When ENDT complexes with cucurbit[8]uril (CB[8]), this binary supramolecular complex assembles into nanorods with a near‐infrared fluorescence emission (655 nm) and fluorescence enhancement as the first stage. Such supramolecular complexes interact with lower‐rim dodecyl‐modified sulfonatocalix[4]arene (SC4AD) to form nanoparticles for further fluorescence enhancement as the second stage. Furthermore, based on a co‐staining experiment with LysoTracker Blue, such nanoparticles can be applied in NIR lysosome‐targeted cell imaging.     

How a Small Structural Difference Can Turn Optical Properties of π‐Extended Coumarins Upside Down: The Role of Non‐Innocent Saturated Rings

The fluorescence properties of two new families of heterocycles possessing either a seven‐ or five‐membered ring attached at the core molecule are entirely different in solution and in the solid state. Crystallization has the effect of inhibiting non‐radiative excited‐state deactivation pathways, operative in solution for the seven‐membered ring compounds, thus leading to significant fluorescence efficiency in the solid state, with quantum yields ranging from 0.10 to 0.36. Conversely, the five‐membered ring derivatives, which display notable emission properties in solution, are almost non‐emissive in the crystalline state, characterized by a long‐range π‐stacked arrangement. When embedded in polymeric films, both series show fluorescence features similar to the solution case, with remarkable fluorescence quantum yields ranging from 0.09 to 0.41. According to quantum chemical calculations, 3H‐chromeno[3,4‐c]pyridine‐4,5‐diones show the specific mechanism of fluorescence quenching. The derivatives bearing the seven‐membered ring undergo, in solution, a significant structural deformation in the excited state, resulting in a large decrease of the energy gap between S₁ and S₀ and hence to a substantial contribution of the internal conversion in the relaxation process. The fluorescence quenching of the five‐membered ring derivatives is in turn related to the intermolecular interaction between adjacent molecules prevailing to a greater extent in the crystal lattice.     

Emissive Synthetic Cofactors: Enzymatic Interconversions of tzA Analogues of ATP,NAD+, NADH,NADP+, and NADPH

A series of enzymatic transformations, which generate visibly emissive isofunctional cofactors based on an isothiazolo[4,3‐d]pyrimidine analogue of adenosine ( ^tz A ), was developed. Nicotinamide adenylyl transferase condenses nicotinamide mononucleotide and ^tz ATP to yield N^tzAD⁺ , which can be enzymatically phosphorylated by NAD⁺ kinase and ATP or ^tz ATP to the corresponding N^tzADP⁺ . The latter can be engaged in NADP‐specific coupled enzymatic transformations involving conversion to N^tzADPH by glucose‐6‐phosphate dehydrogenase and reoxidation to N^tzADP⁺ by glutathione reductase. The N^tzADP⁺ / N^tzADPH cycle can be monitored in real time by fluorescence spectroscopy.     

Emissive Synthetic Cofactors: Enzymatic Interconversions of tzA Analogues of ATP,NAD+, NADH,NADP+, and NADPH

A series of enzymatic transformations, which generate visibly emissive isofunctional cofactors based on an isothiazolo[4,3‐d]pyrimidine analogue of adenosine ( ^tz A ), was developed. Nicotinamide adenylyl transferase condenses nicotinamide mononucleotide and ^tz ATP to yield N^tzAD⁺ , which can be enzymatically phosphorylated by NAD⁺ kinase and ATP or ^tz ATP to the corresponding N^tzADP⁺ . The latter can be engaged in NADP‐specific coupled enzymatic transformations involving conversion to N^tzADPH by glucose‐6‐phosphate dehydrogenase and reoxidation to N^tzADP⁺ by glutathione reductase. The N^tzADP⁺ / N^tzADPH cycle can be monitored in real time by fluorescence spectroscopy.     

All‐Trans Retinal Mediates Light‐Induced Oxidation in Single Living Rod Photoreceptors†

All‐trans retinal is a potent photosensitizer that is released in photoreceptor outer segments by the photoactivated visual pigment following the detection of light. Photoreceptor outer segments also contain high concentrations of polyunsaturated fatty acids, and are thus particularly susceptible to oxidative damage such as that initiated by light via a photosensitizer. Upon its release, all‐trans retinal is reduced within the outer segment to all‐trans retinol, through a reaction requiring metabolic input in the form of NADPH. The phototoxic potential of physiologically generated all‐trans retinal was examined in single living rod photoreceptors obtained from frog (Rana pipiens) retinas. Light‐induced oxidation was measured with fluorescence imaging using an oxidation‐sensitive indicator dye from the shift in fluorescence between the intact and oxidized forms. Light‐induced oxidation was highest in metabolically compromised rod outer segments following photoactivation of the visual pigment rhodopsin, and after a time interval, sufficiently long to ensure the release of all‐trans retinal. Furthermore, light‐induced oxidation increased with the concentration of exogenously added all‐trans retinal. The results show that the all‐trans retinal generated during the detection of light can mediate light‐induced oxidation. Its removal through reduction to all‐trans retinol protects photoreceptor outer segments against light‐induced oxidative damage.     

Engineering Stacks of V‐Shaped Polyaromatic Compounds with Alkyl Chains for Enhanced Emission in the Solid State

A V‐shaped bisanthracene derivative with three butyl groups formed two types of emissive solids that display bluish green and blue fluorescence (Φ_F=72 and 32 %, respectively), depending on the preparation conditions. The crystal and powder X‐ray analyses reveal that the highly emissive solid adopts a head‐to‐head arrangement with discrete stacks of the anthracene moieties, whereas the moderately emissive solid adopts a head‐to‐tail arrangement without the stacks. The obtained molecular arrangements are transformed by thermal stimuli accompanying the change in fluorescence. Furthermore, large enhancements of dye emissions (12–45‐fold) through highly efficient host–guest energy transfer were achieved in the solid state by adding minute amounts of various fluorescent dyes (e.g. rubrene and Nile red) to the V‐shaped compound.     

Fluorescence Quenching in BODIPY Dyes: The Role of Intramolecular Interactions and Charge Transfer

The fluorescence properties of the BODIPY dye and its two meso‐substituted derivatives, tert‐butyl‐ and phenyl‐BODIPY , are rationalized. The non‐emissive behavior of the latter two are attributed to the energetically accessible low‐lying conical intersection between the ground state and the lowest excited singlet state. Both intramolecular non‐covalent interactions and excited state charge transfer character are identified as being crucial for ‘stabilizing’ the intersection and prompting the nonradiative decay. Similar crossing was located in the bare BODIPY dye, however, being energetically less accessible, which correlates well with the high fluorescence quantum yields of the parent dye.     

N‐Heterocyclic Carbene Catalyzed Photoenolization/Diels–Alder Reaction of Acid Fluorides

The combination of light activation and N‐heterocyclic carbene (NHC) organocatalysis has enabled the use of acid fluorides as substrates in a UVA‐light‐mediated photochemical transformation previously observed only with aromatic aldehydes and ketones. Stoichiometric studies and TD‐DFT calculations support a mechanism involving the photoactivation of an ortho‐toluoyl azolium intermediate, which exhibits “ketone‐like” photochemical reactivity under UVA irradiation. Using this photo‐NHC catalysis approach, a novel photoenolization/Diels–Alder (PEDA) process was developed that leads to diverse isochroman‐1‐one derivatives.     

A High Contrast Tri‐state Fluorescent Switch: Properties and Applications

A high contrast tri‐state fluorescent switch (FSPTPE) with both emission color change and on/off switching is achieved in a single molecular system by fusing the aggregation‐induced emissive tetraphenylethene (TPE) with a molecular switch of spiropyran (SP). In contrast to most of the reported solid‐state fluorescent switches, FSPTPE only exists in the amorphous phase in the ring‐closed form owing to its highly asymmetric molecular geometry and weak intermolecular interactions, which leads to its grinding‐inert stable cyan emission in the solid state. Such an amorphous phase facilitates the fast response of FSPTPE to acidic gases and induces the structural transition from the ring‐closed form to ring‐open form, accompanied with the “Off” state of the fluorescence. The structural transition leads to a planar molecular conformation and high dipole moment, which further results in strong intermolecular interactions and good crystallinity, so when the acid is added together with a solvent, both the ring‐opening reaction and re‐crystallization can be triggered to result in an orange emissive state. The reversible control between any two of the three states (cyan/orange/dark) can be achieved with acid/base or mechanical force/solvent treatment. Because of the stable initial state and high color contrast (Δλ=120 nm for cyan/orange switch, dark state Φ_F<0.01 %), the fluorescent switch is very promising for applications such as displays, chemical or mechanical sensing, and anti‐counterfeiting.     

Tunable Dual Fluorescence of 3‐(2,2′‐Bipyridyl)‐Substituted Iminocoumarin

3‐(2,2′‐Bipyridyl)‐substituted iminocoumarin molecules (compounds 1 and 2 ) exhibit dual fluorescence. Each molecule has one electron donor and two electron acceptors that are in conjugation, which leads to fluorescence from two independent charge transfer (CT) states. To account for the dual fluorescence, we subscribe to a kinetic model in which both CT states form after rapid decays from the directly accessed S₁ and S₂ excited states. Due to the slow internal conversion from S₂ to S₁, or more likely the slow interconversion between the two subsequently formed CT states, dual emission is allowed to occur. This hypothesis is supported by the following evidence: 1) the emission at short and long ends of the spectrum originates from two different excitation spectra, which eliminates the possibility that dual emission occurs after an adiabatic reaction at the S₁ level. 2) The fluorescence quantum yield of compound 2 grows with increasing excitation wavelength, which indicates that the high‐energy excitation elevates the molecule to a weakly emissive state that does not internally convert to the low‐energy, highly emissive state. The intensity of the two emission bands of 1 is tunable through the specific interactions between either of the two electron acceptors with another species, such as Zn²⁺ in the current demonstration. Therefore, the development of ratiometric fluorescent indicators based on the dual‐emitting iminocoumarin system is conceivable. Further fundamental studies on this series of compounds using time‐resolved spectroscopic techniques, and explorations of their applications will be carried out in the near future.     

Solid‐State Phosphorescence of trans‐Bis(salicylaldiminato)platinum(II) Complexes Bearing Long Alkyl Chains: Morphology Control towards Intense Emission

Morphology control for intense solid‐state phosphorescence of non‐emissive, but potentially emissive crystals of platinum complexes and the mechanistic rationale are described. A series of trans‐bis(salicylaldiminato)platinum(II) complexes bearing linear alkyl chains ( 1 a : n=5; 1 b : n=8; 1 c : n=12; 1 d : n=14; 1 e : n=16; 1 f : n=18) was synthesized and the solid‐state emission properties were examined by using crystals/aggregates prepared under various precipitation conditions. Crystals of 1 e , prepared using “kinetic” conditions including rapid cooling, high concentrations, and poor solvents, emit intensive yellow phosphorescence (λ_max=545 nm) under UV irradiation at 298 K with an absolute quantum efficiency of 0.36, whereas all the crystals of 1 a – 1 f prepared using “thermodynamic” conditions including slow cooling, low concentrations, and good solvents were either non‐ or less emissive with Φ_298K values of 0.12 ( 1 a ), 0.11 ( 1 b ), 0.10 ( 1 c ), 0.07 ( 1 d ), 0.02 ( 1 e ), and 0.02 ( 1 f ) under the same measurement conditions. The amorphous solid 1 e , prepared by rapid cooling and freeze‐drying, was also non‐emissive (Φ_298K=0.02, 0.02). Temperature‐dependent emission spectra showed that the kinetic crystals of 1 e exhibit high heat‐resistance towards emission decay with increasing temperature, whereas the amorphous solid 1 e is entirely heat‐quenchable. This is a rare example of the change from a non‐emissive crystal into a highly emissive crystal by morphology control through crystal engineering. Emission spectra and powder X‐ray diffraction (XRD) patterns of the emissive, kinetic crystals of 1 e are clearly distinct from those of the less emissive, thermodynamic crystals of 1 a – 1 f . Single‐crystal XRD unequivocally establishes that the thermodynamic crystals of 1 d have a multilayered lamellar structure supported by highly regulated, consecutive π‐stacking interactions between imine moieties, whereas the kinetic crystals of 1 e have a face‐to‐edge lamellar structure with less stacking. These results lead to the conclusion that 1) morphology control of long‐chained complexes exclusively generates a metastable herringbone‐based lamellar packing motif that exhibits intense emission and high heat‐resistance, while 2) a thermodynamically stable, highly regulated, consecutive stacking motif is unfavorable for solid‐state emission.     

ACQ‐to‐AIE Transformation: Tuning Molecular Packing by Regioisomerization for Two‐Photon NIR Bioimaging

The traditional design strategies for highly bright solid‐state luminescent materials rely on weakening the intermolecular π–π interactions, which may limit diversity when developing new materials. Herein, we propose a strategy of tuning the molecular packing mode by regioisomerization to regulate the solid‐state fluorescence. TBP‐e‐TPA with a molecular rotor in the end position of a planar core adopts a long‐range cofacial packing mode, which in the solid state is almost non‐emissive. By shifting molecular rotors to the bay position, the resultant TBP‐b‐TPA possesses a discrete cross packing mode, giving a quantum yield of 15.6±0.2 %. These results demonstrate the relationship between the solid‐state fluorescence efficiency and the molecule's packing mode. Thanks to the good photophysical properties, TBP‐b‐TPA nanoparticles were used for two‐photon deep brain imaging. This molecular design philosophy provides a new way of designing highly bright solid‐state fluorophores.