Antibiotic-assisted three-phase liquid-phase microextraction of aromatic amines from aqueous solutions combined with high-performance liquid chromatography

Three-phase liquid-phase microextraction (LLLME) combined with high-performance liquid chromatography (HPLC) equipped with a monolithic column for the analysis of some aromatic amines is described. These compounds were extracted from an aqueous sample (4.0 mL) adjusted to pH 13 with NaOH-NaCl solution (Donor Phase, P₁) into an organic phase (P₂, 150 μL of Benzyl alcohol and ethyl acetate mixture, 2:1) and then back-extracted into a microdrop of aqueous acceptor phase (P3) adjusted to pH 2 with Na₂HPO₄-H₃PO₄ buffer solution. The extraction time T1 (from P₁ to P₂) was 20 min, and T₂ (from P₂ to P₃) was 1 min. Different antibiotics as complexing agents for amines were added to the acceptor phase to improve the extraction time. Factors such as organic solvents, extraction times, addition of antibiotics to the acceptor phase, and stirring rate were optimized. The method was applied to the determination of aromatic amines in waste-water samples. Enrichment factors ranged from 189.0 to 395.5. The linearity range was from 2.5 to 1000 ng/mL, and the detection limits varied from 0.5 to 1.50 ng/mL. Relative standard deviations (%, n = 5) were found (at S/N 3) to be in the range of 1.3–8.5. All experiments were carried out at room temperature, 22 ± 0.5°C. The text was submitted by the authors in English.     

Simultaneous conduction of two- and three-phase hollow-fiber-based liquid-phase microextraction for the determination of aromatic amines in environmental water samples

This paper describes a simultaneously performed two-/three-phase hollow-fiber-based liquid-phase microextraction (HF-LPME) method for the determination of aromatic amines with a wide range of pK_a (−4.25 to 4.6) and log K_OW (0.9–2.8) values in environmental water samples. Analytes including aniline, 4-nitroaniline, 2,4-dinitroaniline and dicloran were extracted from basic aqueous samples (donor phase, DP) into the microliter volume of organic membrane phase impregnated into the pores of the polypropylene hollow fiber wall, then back extracted into the acidified aqueous solution (acceptor phase, AP) filling in the lumen of the hollow fiber. The mass transfer of the analytes from the donor phase through the organic membrane phase into acceptor phase was driven by both the counter-coupled transport of hydrogen ions and the pH gradient. Afterwards, the hollow fiber was eluted with 50 μL methanol to capture the analytes from both the organic membrane and the acceptor phase. Factors relevant to the enrichment factors (EFs) were investigated. Under the optimized condition (DP: 100 mL of 0.1 M NaOH with 2 M Na₂SO₄; organic phase: di-n-hexyl with 8% trioctylphosphine oxide (TOPO); AP: 10 μL of 8 M HCl; extraction time of 80 min), the obtained EFs were 405–2000, dynamic linear ranges were 5–200 μg/L (R > 0.9976), and limits of detection were 0.5–1.5 μg/L. The presence of humic acid (0–25 mg/L dissolved organic carbon) had no significant effect on the extraction efficiency. The proposed procedure worked very well for real environmental water samples with microgram per liter level of analytes, and good spike recoveries (80–103%) were obtained.     

Development and validation of a hydrophilic interaction liquid chromatographic method for determination of aromatic amines in environmental water

A simple, precise, and accurate hydrophilic interaction liquid chromatographic (HILIC) method has been developed for the determination of five aromatic amines in environmental water samples. Chromatography was carried out on a bare silica column, using a mixture of acetonitrile and a buffer of NaH₂PO₄–H₃PO₄ (pH 1.5, containing 10 mM NaH₂PO₄) (85:15, v/v) as a mobile phase at a flow rate of 1 mL min⁻¹. Aromatic amines were detected by UV absorbance at 254 nm. The linear range of amines was good (r² > 0.998) and limit of detection (LOD) within 0.02–0.2 mg L⁻¹ (S/N = 3). The retention mechanism for the analytes under the optimum conditions was determined to be a combination of adsorption, partition and ionic interactions. The proposed method was applied to the environmental water samples. Aromatic amines were isolated from aqueous samples using solid-phase extraction (SPE) with Oasis HLB cartridges. Recoveries of greater than 75% with precision (RSD) less than 12% were obtained at amine concentrations of 5–50 μg L⁻¹ from 100 mL river water and influents from a wastewater treatment plant (WWTP). The present HILIC technique proved to be a viable method for the analysis of aromatic amines in the environmental water samples.     

Synthesis of novel lipophilic and/or fluorophilic ethers of perfluoro-tert-butyl alcohol, perfluoropinacol and hexafluoroacetone hydrate via a Mitsunobu reaction: Typical cases of ideal product separation

Fluorophilic ethers having the structure RC(CF₃)₂O(CH₂)₃C_nF_2n + 1 are obtained in high yields, when F-tert-butyl alcohol (R = CF₃), F-acetone hydrate (R = O(CH₂)₃C_nF_2n + 1), F-pinacol (R = C(CF₃)₂O(CH₂)₃C_nF_2n + 1) are reacted with 3-perfluoroalkyl-1-propanols (C_nF_2n + 1(CH₂)₃OH, n = 4, 6, 8, 10) in a Mitsunobu reaction (Ph₃P/DIAD [i-PrO₂CN = NCO₂Pr-i]/ether). The parent lipophilic ethers with the structure of (CF₃)₃CO(CH₂)₃C_nH_2n + 1 were prepared analogously using the corresponding fatty alcohols and F-tert-butyl alcohol. To achieve ideal separations, products were transferred to orthogonal phases relative to the other reaction components using fluorous extraction, fluorous solid-organic liquid filtration, or steam-distillation. Selected physical properties including melting and boiling point, together with fluorous partition coefficients of these ethers were determined and the figures obtained were qualitatively analyzed using relevant thermodynamic theories. Some of these ethers are liquids with rather low freezing points and are miscible with fluorocarbon solvents.     

A new high-speed hollow fiber based liquid phase microextraction method using volatile organic solvent for determination of aromatic amines in environmental water samples prior to high-performance liquid chromatography

A new and fast hollow fiber based liquid phase microextraction (HF-LPME) method using volatile organic solvents coupled with high-performance liquid chromatography (HPLC) was developed for determination of aromatic amines in the environmental water samples. Analytes including 3-nitroaniline, 3-chloroaniline and 4-bromoaniline were extracted from 6 mL basic aqueous sample solution (donor phase, NaOH 1 mol L⁻¹) into the thin film of organic solvent that surrounded and impregnated the pores of the polypropylene hollow fiber wall (toluene, 20 μL), then back-extracted into the 6 μL acidified aqueous solution (acceptor phase, HCl 0.5 mol L⁻¹) in the lumen of the two-end sealed hollow fiber. After the extraction, 5 μL of the acceptor phase was withdrawn into the syringe and injected directly into the HPLC system for the analysis. The parameters influencing the extraction efficiency including the kind of organic solvent and its volume, composition of donor and acceptor phases and the volume ratio between them, extraction time, stirring rate, salt addition and the effect of the analyte complexation with 18-crown-6 ether were investigated and optimized. Under the optimal conditions (donor phase: 6 mL of 1 mol L⁻¹ NaOH with 10% NaCl; organic phase: 20 μL of toluene; acceptor phase: 6 μL of 0.5 mol L⁻¹ HCl and 600 m mol L⁻¹ 18-crown-6 ether; pre-extraction and back-extraction times: 75 s and 10 min, respectively; stirring rate: 800 rpm), the obtained EFs were between 259 and 674, dynamic linear ranges were 0.1-1000 μg L⁻¹ (R > 0.9991), and also the limits of detection were in the range of 0.01-0.1 μg L⁻¹. The proposed procedure worked very well for real environmental water samples with microgram per liter level of the analytes, and good relative recoveries (91-102%) were obtained for the spiked sample solutions.     

Ultrasound-assisted ionic liquid dispersive liquid-phase micro-extraction: A novel approach for the sensitive determination of aromatic amines in water samples

Ultrasound-assisted ionic liquid dispersive liquid-phase micro-extraction was developed for the determination of four aromatic amines such as 2,4-dichloroaniline, 1-naphthylamine, 6-chloroanline and N,N-dimethylaniline. High-performance liquid chromatography coupled with UV detector was used for the determination of aromatic amines. In the novel procedure, 1-hexyl-3-methylimidazolium hexafluorophosphate [C₆MIM] [PF₆] was dispersed into the aqueous sample solution as fine droplets by ultrasonication, and which promoted the analytes more easily migrate into the ionic liquid phase. Variable affecting such as the volume of [C₆MIM] [PF₆], sample pH, ultrasonication time, extraction time, centrifuging time have been investigated in detail. The proposed method has been found to have excellent detection sensitivity with limits of detection (LOD, S/N = 3) in the range of 0.17–0.49 μg L⁻¹ and precisions in the range of 2.0–6.1% (RSDs, n = 6). This method has been also successfully applied to analyze the real water samples and good spiked recoveries over the range of 92.2–119.3% were obtained.     

Capillary electrophoretic determination of ammonia using headspace single-drop microextraction

A new method involving headspace single-drop microextraction (SDME) and capillary electrophoresis (CE) is developed for the preconcentration and determination of ammonia (as dissolved NH₃ and ammonium ion). An aqueous microdrop (5 μL) containing 1 mmol/L H₃PO₄ and 0.5 mmol/L KH₂PO₄ (as internal standard) was used as the acceptor phase. Common experimental parameters (sample and acceptor phase pH, extraction temperature, extraction time) affecting the extraction efficiency were investigated. Proposed SDME-CE method provided about 14-fold enrichment in about 20 min. The calibration curve was linear for concentrations of NH₄⁺ in the range from 5 to 100 μmol/L (R² = 0.996). The LOD (S / N = 3) was estimated to be 1.5 μmol/L of NH₄⁺. Such detection sensitivity is high enough for ammonia determination in common environmental and biological samples. Finally, headspace SDME was applied to determine ammonia in human blood, seawater and milk samples with spiked recoveries in the range of 96-107%.     

Synthesis and characterization of fluorous (S)- and (R)-1-phenylethylamines that effect heat facilitated resolution of (±)-2-(8-carboxy-1-naphthylsulfinyl)benzoic acid via diastereomeric salt formation and study of their circular dichroism

Perfluoroalkyl- or nonafluoro-tert-butoxy-alkyl-substituted enantiopure amines having the structure PhCHCH₃(NR¹R²) [R¹ = H, CH₃; R² = (CH₂)₃C₈F₁₇, (CH₂)₂OC(CF₃)₃; R¹ = R² = (CH₂)₃C₈F₁₇, (CH₂)₂OC(CF₃)₃] are obtained in high yields, when (S)-(−)-1-phenylethylamine is reacted with readily accessible alkylating reagents or fluorous 2° amines (R¹ = H; R² = (CH₂)₃C₈F₁₇, (CH₂)₂OC(CF₃)₃) are methylated in a Leuckart-Wallach reaction. The solubility patterns of these novel chiral amines and their hydrochlorides are qualitatively described for a broad spectrum of solvents and the fluorous partition coefficients of the free bases are determined by GC. A novel method for the resolution of enantiomers is disclosed here, which involves the use a half-equivalent of the selected resolving agent in solvent water that displays low solubility for the crystalline diastereomeric salt(s) formed even at temperatures near to its boiling point. Compound (S)-(−)-PhCHCH₃[NH(CH₂)₃C₈F₁₇] is found to satisfy all the latter conditions and successfully used for the heat facilitated resolution of the title racemic acid. The circular dichroism (CD) spectra of six novel fluorous (S)-(−)-1-phenylethylamine derivatives are measured in ethanol, trifluoroethanol and hexafluoropropan-2-ol and discussed in detail.     

Phosphomolybdic acid-catalyzed efficient one-pot three-component aza-Diels-Alder reactions under solvent-free conditions: a facile synthesis of trans-fused pyrano- and furanotetrahydroquinolines

trans-Fused pyrano- and furanotetrahydroquinoline derivatives have been synthesized via a one-pot three-component aza-Diels-Alder reaction of aryl imines formed in situ from aromatic amines and arylaldehydes with cyclic enol ethers,such as 3,4-dihydro-2H-pyran and 2,3-dihydrofuran,in the presence of 1 mol % of phosphomolybdic acid under solvent-free conditions at room temperature in good to excellent yields.     

Triaryl linked donor acceptor dyads for high-performance dye-sensitized solar cells

The effect of changing substituents of organic dyes for their performance on dye-sensitized solar cells (DSSCs) is examined. These dyes consist of an aromatic amine donor group, a cyanoacrylic acid acceptor group, and a triaryl spacer group, while they are linked together by consecutive palladium catalyzed coupling reactions. These materials exhibit strong charge transfer absorption bands in the UV/vis region. Their redox potential levels were estimated by cyclic voltammetry, and found to suit well to the charge flow in DSSCs. Adding electron-donating substituents on the phenyl groups of aromatic amines increased the electron density on the donor groups, therefore reduced the HOMO/LUMO band gap. These dyes were chemisorbed on the surface of nanocrystalline TiO₂, and fabricated into DSSCs through standard operations. For a typical device the maximal monochromatic incident photon-to-current conversion efficiency (IPCE) can reach to 80%, with a short-circuit photocurrent density (J_sc) 16.34 mA cm⁻², an open-circuit photovoltage (V_oc) 0.68 V, and fill factor (FF) 0.55, which corresponds to an overall conversion efficiency of 6.05%.     

Studies on the thermodynamics of solvent extraction of indium (III) with HDEHMTPCA

The equilibrium molalities In³⁺ in {In₂(SO₄)₃ + Na₂SO₄ + HDEHMTPCA + n-C₈H₁₈ + water} were measured at ionic strength from (0.1 to 2.0) mol · kg⁻¹ containing Na₂SO₄ as supporting electrolyte in aqueous phase and at constant molality extractant at temperatures from (278.15 to 303.15) K in organic phase. The standard extraction constants K⁰ at various temperatures were obtained by methods of extrapolation and polynomial approximation. Thermodynamic quantities for the extraction process were calculated.     

Hollow fiber supported ionic liquid membrane microextraction for determination of sulfonamides in environmental water samples by high-performance liquid chromatography

By using ionic liquid as membrane liquid and tri-n-octylphosphine oxide (TOPO) as additive, hollow fiber supported liquid phase microextraction (HF-LPME) was developed for the determination of five sulfonamides in environmental water samples by high-performance liquid chromatography with ultraviolet detection The extraction solvent and the parameters affecting the extraction enrichment factor such as the type and amount of carrier, pH and volume ratio of donor phase and acceptor phase, extraction time, salt-out effect and matrix effect were optimized. Under the optimal extraction conditions (organic liquid membrane phase: [C₈MIM][PF₆] with 14% TOPO (w/v); donor phase: 4 mL, pH 4.5 KH₂PO₄ with 2 M Na₂SO₄; acceptor phase: 25 μL, pH 13 NaOH; extraction time: 8 h), low detection limits (0.1–0.4 μg/L, RSD ≤ 5%) and good linear range (1–2000 ng/mL, R² ≥ 0.999) were obtained for all the analytes. The presence of humic acid (0–25 mg/L dissolved organic carbon) and bovine serum albumin (0–100 μg/mL) had no significant effect on the extraction efficiency. Good spike recoveries over the range of 82.2–103.2% were obtained when applying the proposed method on five real environmental water samples. These results indicated that this present method was very sensitive and reliable with good repeatabilities and excellent clean-up in water samples. The proposed method confirmed hollow fiber supported ionic liquid membrane based LPME to be robust to monitoring trace levels of sulfadiazine, sulfamerazine, sulfamethazine, sulfadimethoxine and sulfamethoxazole in aqueous samples.     

Extraction and separation of a lysine-rich protein by formation of supramolecule between crown ether and protein in aqueous two-phase system

The macrocyclic calixarenes and crown ethers have recently been found to form hydrophobic complexes with the cationic protein cytochrome c (Cyt-c), by recognizing lysine residues on the protein surface. In the present study, it was found that the distribution of cytochrome c in Li₂SO₄/PEG aqueous two-phase system (ATPS) can be controlled by complexation with the crown ether dicyclohexano-18-crown-6 (DCH18C6). The protein was quantitatively extracted into the PEG-rich phase in the presence of DCH18C6 and perchlorate ion. Of various crown ethers and their analogues that were investigated, only DCH18C6 was able to extract cytochrome c into the PEG-rich phase. Extraction of cytochrome c in the ATPS using DCH18C6 is complete within 5 min. Cytochrome c complexed with DCH18C6 in the PEG-rich phase was quantitatively recovered into a salt-rich phase using K₂SO₄ by ion exchange of potassium ion and cationic protein in the cationic protein complex with DCH18C6. Selective extraction of cationic proteins was demonstrated in the ATPS. Under optimum conditions, the lysine-rich protein cytochrome c was selectively extracted over other cationic proteins using DCH18C6.     

Efficient, solventless N-Boc protection of amines carried out at room temperature using sulfamic acid as recyclable catalyst

A simple, rapid, and efficient protocol for the chemoselective N-Boc protection of amines using sulfamic acid as catalyst is described. N-Boc protection of various structurally diverse aliphatic, aromatic, alicyclic, and heterocyclic amines (1°, 2°, 3°) was carried out with (Boc)₂O using sulfamic acid as catalyst (5 mol %) at room temperature under solventless conditions. The advantages of this method are simplicity, shorter reaction times (1-15 min), a cost-effective catalyst, and excellent isolated yields (90-100%); it is also environmentally benign. Moreover, the combined use of ultrasound and sulfamic acid achieves a synergic effect that is especially marked in the N-Boc protection of deactivated (sterically hindered and electron-deficient) amines. The catalyst possesses distinct advantages: ease of handling, cleaner reactions, high activity, and excellent chemoselectivity.     

Complex formation of crown ethers with cations in the (water + organic solvent) mixtures: Part IX. Thermodynamics of interactions of Na ion with benzo-15-crown-5 ether in {(1 − x)DMA + xH2O} at T = 298.15 K

The thermodynamic functions of complex formation of benzo-15-crown-5 ether with sodium cation in {(1 − x)DMA + xH₂O} at T = 298.15 K have been calculated. The equilibrium constants of complex formation of benzo-15-crown-5 ether with sodium cation have been determined by conductivity measurements. The enthalpic effect of complex formation has been measured by calorimetric method at T = 298.15 K. The complexes are enthalpy stabilized and entropy destabilized. A simple model has been proposed to describe the relationship between the thermodynamic functions of complex formation of crown ethers with sodium cation and the structural and energetic properties of the mixed water-organic solvent. The linear enthalpy-entropy relationship for complex formation is also presented. The solvation enthalpy of the complex in {(1 − x)DMA + xH₂O} is discussed.     

Novel generation ponytails in fluorous chemistry: Syntheses of primary, secondary, and tertiary (nonafluoro-tert-butyloxy)ethyl amines

(Nonafluoro-tert-butyloxy)ethyl tosylate 4 was prepared in 65% yield from nonafluoro-tert-butanol 1 using commercially available reagents. Further reaction of 4 with HNR¹R² (R¹ = R² = H, CH₃; R¹ = H, R² = CH₃, (CH₂)₃C₈F₁₇, CH₂CH₂OC(CF₃)₃) affords the appropriate (CF₃)₃COCH₂CH₂NR¹R² amines in 20-69% yields. Improved overall yields of [(CF₃)₃COCH₂CH₂]_3−nNR_n to 1 were obtained by the reaction of (CF₃)₃CONa 2 and (XCH₂CH₂)_3−nNR_n (X = Cl, n = 0, 1, 2, R = CH₃; X = CH₃SO₂O, n = 1, R = CH₃SO₂) nitrogen mustards and a similar reactive β-substituted ethyl amine. The title amines are mobile colorless liquids and volatile with steam. The bulky fluorous ponytail (CF₃)₃CO(CH₂)₂ displays high acidic stability and increases fluorous character almost as much as the classical straight-chain C₈F₁₇(CH₂)₃ ponytail.     

Separation of aromatic hydrocarbons from alkanes using ammonium ionic liquid C2NTf2 at T = 298.15 K

(Liquid + liquid) equilibrium data are presented for four ternary systems of an alkane, or aromatic compound and ethyl(2-hydroxyethyl)dimethylammonium bis{(trifluomethyl)sulfonyl}imide (C₂NTf₂) at 298.15 K: [hexane + benzene + C₂NTf₂], [hexane + p-xylene + C₂NTf₂], and [hexane, or octane + m-xylene + C₂NTf₂]. The separation of aromatic hydrocarbons (benzene, or p-xylene, or m-xylene) from aliphatic hydrocarbons (hexane, or octane) is investigated by extraction with the ammonium ionic liquid. Selectivities and distribution ratios are discussed for these mixtures at constant temperature. The data were analysed and compared to those previously reported for other ionic liquids and especially for the system {hexane + benzene + [EMIM][NTf₂]}. The nonrandom two liquid NRTL model was successfully used to correlate the experimental tie-lines and to calculate the phase compositions of the ternary systems.     

Solvent extraction of sodium perrhenate by 3m-crown-m ethers (m = 5, 6) and their mono-benzo-derivatives into 1,2-dichloroethane: Elucidation of an overall extraction equilibrium based on component equilibria containing an ion-pair formation in water

Equilibrium constants () for the ion-pair formation of a complex ion NaL⁺ with ReO₄⁻ in water were determined potentiometrically at 25 °C and the ionic strength (I) of 0 mol dm⁻³ using a Na⁺-selective electrode. Here, crown ethers, L, were 15-crown-5 ether (15C5), benzo-15C5, 18-crown-6 ether (18C6) and benzo-18C6. Also, NaReO₄ was extracted by the L into 1,2-dichloroethane and then extraction constants (K_ex/mol⁻² dm⁶) for the species, NaLReO₄, were determined at 25 °C by AAS. These K_ex values were resolved into four component equilibrium constants containing K_MLA calculated at given I values. Based on these data, extraction-abilities of the L against the perrhenate were discussed in comparison with those of sodium picrate-L systems reported previously.     

On-off-switched crown-metal complexation by photoinduced intramolecular tail (ammonium)-biting

New photoresponsive crown ethers (1H⁺) having a crown ring and an ammoniumalkyl (H₃N⁺(CH₂)_n ^–, n=4,6,10) group attached to the two sides of an azobenzene have been synthesized. Photoresponsive properties (thermal isomerization, metal extraction, membrane transport, etc.) were examined, and the results were compared with those of other photoresponsive crown ethers and complexons.     

New C2-symmetric 2,2′-bipyridine crown macrocycles for enantioselective recognition of amino acid derivatives

A series of new C₂-symmetric 2,2′-bipyridine-contaning crown macrocycles 1-4 has been developed for enantiomeric recognition of amino acid derivatives. These new macrocycles have been showed to be strong complexing agents for primary organic ammonium salts (with K up to 4.83×10⁵ M⁻¹ and −ΔG₀ up to 32.4 kJ mol⁻¹) and also useful chromophores for UV-vis titration studies. These macrocyclic hosts exhibited enantioselective binding towards the (S)-enantiomer of phenylglycine methyl ester hydrochloride (Am1) with K_(S)/K_(R) up to 2.10 (ΔΔG₀=−1.84 kJ mol⁻¹) in CH₂Cl₂ with 0.25% CH₃OH. The structure-binding relationship studies showed that the aromatic subunit and the ester group of the ammonium guests are both important for good enantioselectivity. In addition, the host-guest complexes have been studied using various NMR experiments.