基于光波导分光光谱技术研究蛋白质与亚甲基蓝的竞争吸附行为

通过利用时间分辨光波导分光光谱技术原位测量从蛋白质-亚甲基蓝(MB)混合水溶液吸附到亲水玻璃光波导表面的MB可见光吸收谱,观测到在溶液pH值低于蛋白质等电点时MB与牛血清蛋白(BSA)以及MB与血红蛋白(Hb)存在竞争吸附行为,进一步测得这种竞争吸附行为对蛋白质浓度十分敏感,可以用于简单测定溶液中的蛋白质含量.基于Langmuir等温吸附理论推导出了两种分子竞争吸附的动力学方程,并利用该动力学方程对实验测得的吸光度随时间变化曲线进行了最佳拟合,揭示了玻璃表面吸附的MB分子个数在达到最大值后随时间呈指数衰减,同时得出拟合参数与蛋白质浓度呈准线性关系.     

In situ investigation of coadsorption of myoglobin and methylene blue to hydrophilic glass by broadband time-resolved optical waveguide spectroscopy

Recently, we have developed a broadband optical waveguide (OWG) spectrometer by using commercially available glass plates of tens of micrometers in thickness as the substrate-free multimode waveguides (Qi et al. Opt. Lett. 2002, 27, 2001-2003). The spectrometer having a bandwidth from 360 to 800 nm is capable of simultaneously detecting the Soret-band absorption of heme proteins and the visible absorption of organic dyes. In this article, the spectrometer was used to in situ investigate coadsorption of methylene blue (MB) and myoglobin from the mixed aqueous solution onto bare glass. Both MB and myoglobin in the mixed solution are positively charged, which makes them not only avoid the chemical interaction between each other but also easy to adsorb to hydrophilic glass. It was found that the coadsorption of MB and myoglobin occurred just in the early stage and the glass surface was finally occupied by myoglobin. The OWG spectroscopic investigation into the respective MB and myoglobin adsorptions shows that MB adsorption is reversible to some degree but that of myoglobin is irreversible. It reveals that the electrostatic binding of myoglobin to bare glass is stronger than the case of MB. Therefore, the adsorbed MB can be substituted by myoglobin. Moreover, via the electrostatic repulsion the tightly immobilized myoglobin prevents bulk MB from occupying the empty surface sites. It is the reason MB is absent from the hydrophilic glass coated with a submonolayer of myoglobin. In the article, we explained both the strong dimerization of MB at the interface and a slow decrease with time of the Soret-band absorbance after its maximum was reached. We also estimated the myoglobin coverage based on the waveguide theory. The study shows the distinguished applicability of the broadband OWG spectroscopy for in situ, real-time monitoring of the dye-protein coadsorption to silica from the mixed solution.     

光波导分光光谱技术研究染料分子在玻璃表面的吸附特性

光波导分光光谱技术利用光波导表面的消逝场敏感地测定有色物质亚单分子吸附层的偏振吸收光谱, 非常适合于研究染料、颜料、荧光分子、量子点、金属纳米粒子、带色基的蛋白质等在固/液界面的吸附行为. 本文使用宽频带卤钨灯、棱镜耦合的薄膜玻璃光波导和基于电荷耦合器件(CCD)的光谱分析仪设计制作了具有时间分辨本领的光波导分光光谱装置, 并利用该装置实时监测了罗丹明6G(R6G)和亚甲基蓝(MB)在玻璃表面的吸附特性. 通过比较在横电(TE)和横磁(TM)偏振模式下的吸收光谱, 发现R6G主要以二聚体和单体的形式吸附在玻璃表面, 而MB主要以多聚体的形式吸附在玻璃表面, 并分别估算了它们的平均取向角.     

Development of a novel electrochemical cell for slab optical waveguide spectroscopy for in situ observation of methylene blue and anions on an electrode/electrolyte interface

A new spectroelectrochemical cell for slab optical waveguide (SOWG) spectroscopy was developed in order to observe in situ an electrode/electrolyte interface for bulk electrolysis. The new SOWG spectroelectrochemical cell has been evaluated by simultaneous electrochemical-absorption experiments of methylene blue (MB) using cyclic voltammetry (CV) and SOWG spectrometry. CV was performed in the SOWG spectroelectrochemical cell using indium tin oxide (ITO) coated glass as the working electrode, platinum wire as the counter electrode and a silver/silver chloride electrode (Ag/AgCl) as the reference electrode. Based on the CV and SOWG spectrometric data, it was found that the SOWG spectra showed the MB spectra on the electrode surface selectively and that SOWG with the cell would be useful as a tool for in situ study of an electrode/electrolyte interface. Using this cell, the effects of the supporting electrolytes, NaNO₃, KNO₃, CH₃COONa, and CH₃COOK on the absorbance of MB were examined at the potential of +0.8 V versus Ag/AgCl. The decrease in MB absorbance by nitrate ions was greater than that of acetate ions. Therefore the competitive adsorption of nitrate ions was stronger than that of acetate ions. Thus, the decrease in absorbance of MB in the presence of anions demonstrates the competitive adsorption of anions. These results show that the extent of specific adsorption of electrolytes was observed by measuring the SOWG absorbance intensity of MB.     

Kinetics of competitive adsorption of β-casein and methylene blue on hydrophilic glass

The competitive adsorption of methylene blue (MB) and β-casein on hydrophilic glass from an aqueous mixed solution was directly detected at the solution pH smaller than the protein isoelectric point (pI) by means of the waveguide-based broadband time-resolved evanescent wave absorption spectroscopy. The competitive adsorption causes the MB coverage to exponentially decrease with time from its peak value and prevents MB aggregation at the interface. The kinetic equation for the competitive adsorption of binary adsorbates was theoretically deduced based on the Langmuir model, and was used for creating the best fit to the experimental data. In the case of a fixed concentration of MB in the mixed solution, the best-fit parameter τ(-1) increases with the protein concentration at a specific pH and decreases with the solution pH at a given concentration of protein. The findings suggest that the β-casein concentration in sub-μM level can be rapidly determined by the time-resolved waveguide absorptiometry based on the competitive adsorption of MB and protein.     

Molecular orientation study of methylene blue at an air/fused-silica interface using evanescent-wave cavity ring-down spectroscopy

Using evanescent-wave cavity ring-down spectroscopy (EW-CRDS), we monitored the change in the absorbance of a thin film of methylene blue (MB) at an air/fused-silica interface while varying the polarization of the incident light (600 nm). We derived the average orientation angle of the planar MB molecules with respect to the surface normal and observed that the average orientation angle decreases as the surface concentration increases. At low surface concentrations, the MB molecules lie almost flat on the surface, whereas at higher surface concentrations the molecules become vertically oriented.     

Improved visible light photocatalytic activity of titania loaded with silver on discoloration of a heterocyclic aromatic chemical dye solution

The photocatalytic activity of silver deposited Degussa P25 titanium dioxide (Ag-DP25) in the photodegradation of methylene blue (MB) was investigated. The as-prepared materials were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-vis diffuse reflectance spectroscopy (DRS), infrared spectra and surface photovoltage spectroscopy (SPS) techniques. The obtained results show that the silver dopant could effectively inhibit the recombination of the photoinduced electron and holes, improving the absorption capability for visible light of photocatalyst and leading to increased surface OH group density. The degradation experiment reveals that the catalytic property of Ag-DP25 in the degradation of MB dye is more efficient than that of commercially available Degussa P25 TiO₂ (DP25) samples under visible-light irradiation. Besides, degradation kinetics of MB dye can, be well described by Langmuir-Hinshelwood equation and shows pseudo-first order law.     

Study on the interaction of methylene blue with cyclodextrin derivatives by absorption and fluorescence spectroscopy

The ability of beta-cyclodextrin (beta-CD), hydroxypropyl-beta-cyclodextrin (HP-beta-CD), and carboxymethyl-beta-cyclodextrin (CM-beta-CD) to break the aggregate of the methylene blue (MB) and to form 1:1 inclusion complexes has been studied by absorption and fluorescence spectroscopy. Experimental conditions including concentrations of various cyclodextrins (beta-CD, HP-beta-CD and CM-beta-CD) and media acidity were investigated for the inclusion formation in detail. The formation constants are calculated by using steady-state fluorimetry, from which the inclusion capacity of different cyclodextrins (CDs) is compared. The results suggest that the charged beta-cyclodextrin (CM-beta-CD) is more suitable for inclusion of the cationic dye MB than the neutral beta-cyclodextrins (beta-CD, HP-beta-CD) at pH>5. A mechanism is proposed which is consistent with the stronger binding of MB with CM-beta-CD compared with the other CDs at pH>5.     

In situ monitoring of metal nanoparticle self-assembly on protein-functionalized glass by broadband optical waveguide spectroscopy

Broadband, time-resolved optical waveguide (OWG) spectroscopy has been used for in situ, real-time investigation into the self-assembly of metal nanoparticle monolayers. The OWG spectroscopy makes it possible to use the transverse electric (TE) and transverse magnetic (TM) modes to measure surface plasmon absorption of immobilized metal nanoparticles in two directions, parallel and normal to the waveguide surface. Therefore, this technique can provide direction-dependent information on the metal nanoparticles at the interface. In this paper, a 50-microm-thick glass plate was used as a slab waveguide and the kinetics of Au nanoparticle adsorption on a hemoglobin-functionalized glass substrate was examined in the early stage of self-assembly. The findings show that with the TE mode the surface plasmon resonance (SPR) behavior for immobilized Au nanoparticles is different from that with the TM mode.     

Sensitive measurement of methylene blue active substances by attenuated total reflection spectrometry with a trimethylsilane-modified glass slab optical waveguide

Attenuated total reflection spectrometry with a slab optical waveguide (SOWG) was explored for the simple, rapid and sensitive measurement of total anionic surfactants by the methylene blue active substance (MBAS) method. A fused-silica sheet used as a guiding layer was modified with trimethylsilane (TMS) to extract and concentrate the MBASs on the SOWG surface. Based on preliminary studies of the adsorption behavior and visible ATR spectrum of MB on the modified silica surface, a detection wavelength of 600 nm was chosen for the sensitive measurement of anionic surfactants. When the concentration of MB was set at 10 microM in the final measurement solution, the calibration curve for a typical anionic surfactant (sodium dodecylbenzenesulfonate) was linear up to 0.6 microM and the detection limit was 0.07 microM. The proposed method was applied to the determination of total anionic surfactants in river water.     

Nucleation and Growth Mechanism of Electropolymerization of Methylene Blue: The Effect of Preparation Potential on Poly(methylene blue) Structure

Nucleation and growth mechanism of electropolymerization of methylene blue (MB) in a basic medium and the effect of preparation potential on poly(MB) film structure were investigated by using cyclic voltammetry, potentiostatic current‐time transient, scanning tunneling microscopy (STM), atomic force microscopy (AFM), and UV‐vis. absorption spectroscopy techniques. Electropolymerization of MB has been achieved by potentiodynamic (cyclic voltammetry) and potentiostatic (constant potential) techniques. The potentiostatic current‐time transients fitted with a theoretical model and morphological studies indicate that nucleation and growth mechanism of poly(MB) starts with a progressive layer‐by‐layer nucleation and growth besides random adsorption. Nucleation and growth of poly(MB) follows a process between progressive layer‐by‐layer and 3‐D instantaneous mechanism resulting in highly‐oriented poly(MB) nanofibers with increasing poly(MB) film thickness. Cyclic voltammetry and morphological studies exhibit that poly(MB) film structure changes depending on the preparation potential. Poly(MB) films prepared at the potential values of 900 and 950 mV show a well‐ordered, smooth surface but at the potential values higher than 1000 mV, rough polymer surface arises as overoxidation takes place. UV‐vis. absorption spectra of poly(MB) film and MB monomer show three peaks. The peak at 410 nm for poly(MB) shows 100 nm blue shift when compared to the MB monomer and is attributed to poly(MB) formation on the electrode.     

High-resolution waveguide terahertz spectroscopy of partially oriented organic polycrystalline films

We have characterized the terahertz (THz) vibrational spectroscopy of organic polycrystalline thin films using the new experimental technique of waveguide terahertz time domain spectroscopy (waveguide THz-TDS). The organic materials used in this study are tetracyanoquinodimethane (TCNQ) and 1,3-dicyanobenzene (13DCB). For each material, a thin film is cast onto one of the inner surfaces of a metal parallel plate waveguide (PPWG), followed by measurement of the low-frequency vibrational spectrum using waveguide THz-TDS. The vibrational spectra of the waveguide films are compared to corresponding vibrational spectra of standard pellet samples made by dispersing the organic solid in transparent polyethylene. We show how the waveguide films produce significantly narrower THz vibrational line shapes and reveal additional spectral lines that are obscured by inhomogeneous broadening effects in the pellet samples. When TCNQ waveguide films are cooled to 77 K, vibrational line widths as sharp as 25-30 gigahertz (0.83-1.0 cm(-1)) at the full width at half-maximum are observed, which are among the narrowest far-infrared line widths measured for this material. The origin of the line-narrowing effect for the waveguide films is the suppression of inhomogeneous broadening due to the planar ordering of the film on the waveguide surface. The TCNQ waveguide films are further characterized using optical microscopic evaluation to understand how film morphology affects the THz vibrational spectrum. X-ray diffraction is used to determine the orientation of the polycrystalline TCNQ films on the PPWG surface and to qualitatively explain the different vibrational line strengths observed for the ordered waveguide film relative to the random pellet.     

A sub-second, time-resolved, linear dichroism measurement system for visible attenuated total reflection spectroscopy with a slab optical waveguide

A sub-second, time-resolved, linear dichroism (LD) measurement system was constructed, fitted with a slab optical waveguide (SOWG), and utilized to observe the adsorption process of methylene blue (MB) onto silica surfaces. In the system, a semiconductor laser (670 nm) was used as the light source and the out-coupled beam from the SOWG was split by a polarizing beam splitter into two polarized beams (TE and TM modes) to allow sequential linear dichroic ratio data to be obtained; the acquisition rate was 11 data sets per second. For an MB solution that contained no sodium dodecylbenzenesulfonate (DBS), in contact with a bare silica surface, a clear decrease occurred in the average orientation angle of adsorbed MB in the initial stages of the adsorption process. This result may correspond to a change in the chemical form of MB from monomer to dimer.     

Anionic groups on cellulosic fiber surfaces investigated by XPS, FTIR-ATR, and different sorption methods

Anionic groups (AGs) on different cellulosic fiber surfaces were investigated by methylene blue (MB) and polyelectrolyte (PE) sorption, X-ray photoelectron spectroscopy (XPS), and total attenuated reflectance infrared spectrometry (FTIR-ATR). The MB sorption isotherms fitted well the Langmuir equation that gave consistent estimations of sorption capacities. FTIR-ATR showed that MB molecules had extensive accessibility to the fiber wall pores. Estimation of surface AGs by PE sorption gave much higher values than a new method combining MB sorption and XPS measurements (MB-XPS). The surface AGs in different cellulosic fibers accounted for 1-3% of the total AG content as revealed by MB-XPS. It was suggested that PE molecules can penetrate the fiber wall and form loops or unattached segments at external fiber surfaces that disrupt the PE sorption stoichiometry. The competition of MB and PE for the anionic sites in papermaking was assessed and it was shown that MB ions have a much stronger affinity to AGs than PE molecules.     

A facile and green preparation of nanosilica-supported antioxidant and its reinforcement and antioxidation effect on styrene-butadiene rubber

A novel solid-phase method has been proposed to prepare a nanosilica-supported antioxidant by the reaction of nanosilica with 2-mercaptobenzimidazole (MB) and silane coupling agent γ-chloropropyltriethoxysilane. Fourier transform-infrared spectroscopy and other characterization methods confirmed that MB was chemically bonded onto the surface of nanosilica. Silica-s-MB was homogeneously dispersed in a styrene-butadiene rubber (SBR) matrix with strong filler-rubber interaction, leading to enhanced mechanical performance of SBR/silica-s-MB composites compared with SBR/m-silica composites. Based on the results of thermo-oxidation testing of SBR/silica-s-MB and SBR/m-silica/MB composites containing equivalent antioxidant component, silica-s-MB showed better antioxidative efficiency than the corresponding low-molecular-weight MB owing to its lower migration and volatility at high temperature.     

Raman spectroelectrochemical study of Meldola blue, adsorbed and electropolymerized at a gold electrode

Surface-enhanced Raman spectroscopy (SERS) was used to probe the structure of adsorbed and electropolymerized Meldola blue (MB) films on roughened gold surfaces in solutions with pH 1.0 and 7.0 by using 785 nm excitation wavelength. Spectral bands were assigned based on density functional theory (DFT) calculations at B3LYP/6-311+G(2d, p) level. The most characteristic band of the oxidized MB form was found to be the breathing vibration of the central ring containing heteroatoms at 596 cm(-1). Based on a red shift of bands assigned to vibrations of double C=N(C(2)H(6)) bonds and adjacent ring C=C bonds in surface spectra as compared with solution 1 it was suggested that polymerization and interaction with an electrode surface proceed through these moieties. The presence of out-of-plane bands in SERS spectra was attributed to "flat" or slightly "tilted" orientation of aromatic rings at the interface. Potential-dependent spectral changes were followed by SERS spectroscopy. Raman spectra of the reduced MB form were obtained in both pH 1.0 and pH 7.0 solutions by analysis of the potential-difference SERS spectra. Reduced MB form can be recognized by characteristic bands near 1620, 1574, 1374, and 1234 cm(-1). By comparing the intensities of 1637 cm(-1) (oxidized MB form) and 1374 cm(-1) (reduced MB form) bands in experimental spectra of polymerized MB in pH 1.0 solution, a reduction-induced decrease by factor of 7 was estimated. A similar tendency in intensity changes showed calculations indicating that this effect is associated with reduction-induced changes in the molecular structure of the dye.     

玻璃硅烷化处理对罗丹明6G和亚甲基蓝吸附行为的影响

利用六甲基二硅烷胺对平面玻璃光波导(高折射率透明导光薄膜介质)进行硅烷化处理, 得到水接触角大于90°的疏水表面. 然后使用时间分辨光波导分光光谱技术研究水溶液中的罗丹明6G (R6G)和亚甲基蓝(MB)分子在疏水玻璃表面的吸附行为, 并与亲水玻璃条件下测得的结果进行对比. 对利用疏水玻璃光波导测得的R6G的吸附-脱附动力学曲线进行Langmuir拟合得到了R6G的吸附速率常数, 脱附速率常数以及吸附自由能. 并且发现与亲水玻璃情况相比, 吸附速率常数增大, 脱附速率常数减小, 吸附自由能更负. 在疏水玻璃表面形成的R6G和MB吸附层的吸光度与亲水玻璃情况相比显著升高, 表明这两种分子更倾向于吸附在疏水玻璃表面. 实验结果还发现玻璃硅烷化处理能够有效抑制这两种染料分子在表面的聚合反应.     

Self-assembly of acridine orange dye at a mica/solution interface: formation of nanostripe supramolecular architectures

Optical waveguide spectroscopy and atomic force microscopy (AFM) have been used to characterize the supramolecular architectures of acridine orange (AO) dye self-assembled at a mica/aqueous solution interface. Under the saturated adsorption conditions, optical waveguide spectroscopy revealed that the dye formed H-type aggregates at the interface. In situ AFM visualized interesting morphology of the dye aggregates showing nanosized meandering stripes with the width of approximately 1.5 nm (or brightness periodicity of approximately 3 nm). Electrostatic adsorption of the dye cations onto a mica surface as well as the intermolecular pi-pi stacking brought about the ordered nanostructures. We propose an interfacial aggregation model that shows a meandering staircase structure with the intermolecular slip angle of 60 degrees. According to the model, the AO molecule occupies a surface area of about 1.0 nm2.     

Study of adsorption of methylene blue and new methylene blue in liquid-solid interface by slab optical waveguide spectroscopy

A slab optical waveguide (SOWG) has been used for study of adsorption of both methylene blue (MB) and new methylene blue (NMB) in liquid–solid interface. Adsorption characteristics of MB and NMB on both bare SOWG and silanized SOWG by octadecyltrichlorosilane (ODS) were compared. Effect of pH on adsorption on MB and NMB was investigated. Binding rate constant analysis showed that both MB and NMB on bare SOWG demonstrates larger association constants than those on ODS-SOWG. Interactions of MB and NMB on bare SOWG and ODS-SOWG were analyzed by molecular mechanics calculation method. The binding energy change was in the following order: E_NMB–bare > E_MB–bare > E_NMB–ODS > E_MB–ODS.     

Free‐standing Graphene/Poly(methylene blue)/AgNPs Composite Paper for Electrochemical Sensing of NADH

Highly flexible graphene/poly(methylene blue)/AgNPs composite paper was successfully prepared for amperometric biosensing of NADH. For this purpose, a dispersion including graphene oxide (GO), methylene blue (MB) and silver nanoparticles (AgNPs) was prepared and GO/MB/AgNPs paper was acquired by vacuum‐filtration of this dispersion through a suitable membrane. After peeling it off from membrane, it was transformed to rGO/MB/AgNPs paper by performing reduction with hydriodic acid. In a three‐electrode cell, which is containing 0.1 M phosphate buffer solution (pH: 9.0), rGO/MB/AgNPs paper was used as working electrode and rGO/poly(MB)/AgNPs composite paper was generated by surface‐confined electropolymerization of MB using successive cyclic voltammetry approach in a suitable potential window. Characterization of this composite paper was carried out by using scanning electron microscopy, scanning tunneling microscopy, X‐ray photoelectron spectroscopy, powder X‐ray diffraction spectroscopy, Raman spectroscopy, four‐point probe conductivity measurement and cyclic voltammetry techniques. Flexible rGO/poly(MB)/AgNPs composite paper has demonstrated high sensitivity, wide linear range and low detection limit for amperometric quantification of NADH.