Efficient palladium-catalyzed homocoupling reaction and Sonogashira cross-coupling reaction of terminal alkynes under aerobic conditions

An efficient method for palladium-catalyzed homocoupling reaction of terminal alkynes in the synthesis of symmetric diynes is presented. The results showed that both Pd(OAc)(2) and CuI played crucial roles in the reaction. In the presence of 2 mol % Pd(OAc)(2), 2 mol % CuI, 3 equiv of Dabco, and air, homocoupling of various terminal alkynes afforded the corresponding symmetrical diynes in moderate to excellent yields, whereas low yields were obtained without either Pd(OAc)(2) or CuI. Moreover, high TONs (turnover numbers; up to 940 000 for the reaction of phenylacetylene) for the homocoupling reaction were observed. Under similar reaction conditions, cross-coupling of 1-iodo-4-nitrobenzene with phenylacetylene was also carried out smoothly in quantitative yield. However, the presence of CuI disfavored the palladium-catalyzed Sonogashira cross-coupling reactions of the less active aryl iodides and bromides. In the presence of 0.01-2 mol % Pd(OAc)(2), a number of aryl iodides and bromides were coupled with terminal alkynes in good to excellent yields. It is noteworthy that this protocol employs mild, efficient, aerobic, copper-free, and ligand-free conditions.     

DABCO作为高效配体促进钯催化末端炔烃自偶联反应研究

发展了一种以DABCO(1,4-diaza-bicyclo[2.2.2]octane)为配体高效钯催化末端炔烃自偶联反应方法.在醋酸钯(2 mol%)、碘化亚铜(2 mol%)、DABCO(4 mol%)、醋酸钠(3 mmol)、乙腈(5 mL)和空气氛等条件下,1 mmol的末端炔烃可以顺利发生自偶联反应生成相应的二炔化合物,产率为中等到良好.     

Cyclopalladated ferrocenylimines: efficient catalysts for homocoupling and Sonogashira reaction of terminal alkynes

A novel pathway for homocoupling of terminal alkynes has been described using cyclopalladated ferrocenylimine 1 or 2/CuI as catalyst in the air. This catalytic system could tolerate several functional groups. The palladacycle 2 in the presence of n-Bu₄NBr as an additive could be applied to Sonogashira cross-coupling reaction of aryl iodides, aryl bromides, and some activated aryl chlorides with terminal alkynes under amine- and copper-free conditions, mostly to give moderate to excellent yields.     

Importance of bases on the copper-catalyzed oxidative homocoupling of terminal alkynes to 1,4-disubstituted 1,3-diynes

Copper-catalyzed, solvent-free oxidative homocoupling of terminal alkynes can be performed to 1,3-diynes in good to excellent yields in the absence of any additives, using air as environmentally friendly oxidant and the occurrence of water as an exclusive byproduct in the whole process. It is shown that AcO⁻ of copper (II) acetate catalyst may take the role of base and found that the homocoupling cannot occur using weakly basic copper salt catalysts such as CuBr, CuCl, or CuI. Thus, the bases are absolutely necessary in the process of the homocoupling of terminal alkynes.     

Synthesis of symmetrical 1, 3-diynes via tandem reaction of (Z)-arylvinyl bromides in the presence of DBU and CuI

Microwave-assisted tandem reaction of(Z)-arylvinyl bromides involving an elimination and homocoupling in the presence of DBU and Cul in DMF affords a variety of symmetrical 1,3-diynes in good to excellent yields.This tandem process,eliminating the need of volatile and savory terminal alkynes,provides an alternative to the conventional homocoupling methods for the synthesis of symmetrical 1,3-diynes.     

Pd/C mediated synthesis of 2-substituted benzo[b]furans/nitrobenzo[b]furans in water

An efficient synthesis of 2-alkyl/aryl substituted benzo[b]furans/nitrobenzo[b]furans in water has been accomplished via Pd/C catalyzed reaction of o-iodophenols with terminal alkynes in the presence of PPh₃, CuI and prolinol. This method can tolerate a variety of functional groups present in the alkynes as well as base labile nitro group in the o-iodophenols. The protocol does not require the use of a phase transfer catalyst or water-soluble phosphine ligands and is free from the use of any organic co-solvent.     

Synthesis of 1,3-diynes via palladium-catalyzed reaction of 1, 1-dibromo-1-alkenes

[reaction: see text] Both symmetric and unsymmetric 1,3-diynes were prepared from the palladium-catalyzed reaction of 1,1-dibromo-1-alkenes. The formation of symmetric 1,3-diynes 2 (homocoupling) was catalyzed by a weak ligand, tris(2-furyl)phosphine (TFP), and the addition of catalytic amount of CuI accelerated the reaction. The synthesis of unsymmetric 1,3-diynes 4 (the Sonogashira reaction) required a highly electron rich tris(4-methoxyphenyl)phosphine as the ligand, and CuI promotes the formation of byproduct 1,1-diynyl-1-alkenes 5.     

Hydrothiolation of terminal alkynes with diaryl disulfides and diphenyl diselenide: selective synthesis of (Z)-1-alkenyl sulfides and selenides

A simple, stereoselective and efficient method for the hydrothiolation of terminal alkynes with diaryl disulfides and diphenyl diselenide has been developed. In the presence of CuI, rongalite, and Cs₂CO₃, a variety of disulfides underwent the reaction of terminal alkynes stereoselectively to afford the corresponding (Z)-1-alkenyl sulfides in moderate to excellent yields. It is noteworthy that hydroselenations of 1,2-diphenyldiselane with alkynes are also conducted smoothly to afford (Z)-1-alkenyl selenides in good yields under the standard conditions.     

CuI/PPh3‐catalyzed Sonogashira coupling reaction of aryl iodides with terminal alkynes in water in the absence of palladium

The Sonogashira cross‐coupling of aryl iodides with terminal alkynes catalyzed by a simple and inexpensive catalyst system of CuI/PPh₃ in water as the sole solvent has been reported. In the presence of CuI/PPh₃, with KOH used as a base, a number of aryl iodides were treated with alkynes to afford the corresponding products in moderate to excellent yields. Copyright © 2008 John Wiley & Sons, Ltd.     

3‐(Diphenylphosphino)propanoic acid: an efficient ligand for the Pd/Cu‐catalyzed homo‐coupling of terminal alkynes in the presence of oxygen at room temperature

A simple, yet efficient system for PdCl₂/CuI to catalyze the homo‐coupling reactions of various terminal alkynes has been developed using 3‐(diphenylphosphino)propanoic acid as ligand in the presence of oxygen. The alkynes, including aromatic, heteroaromatic and aliphatic alkynes, were transformed at room temperature into the corresponding 1,3‐diynes in moderate to excellent yields. The turnover number was up to 1.04 × 10³. Copyright © 2015 John Wiley & Sons, Ltd.     

The nickel-catalyzed Sonogashira-Hagihara reaction

The Sonogashira-Hagihara coupling of terminal acetylenes with aryl iodides in the presence of a nickel catalyst and CuI was investigated. The reaction proceeds rapidly in aqueous dioxane in the presence of Ni(PPh₃)₂Cl₂ with high yields of disubstituted tolanes being obtained. The reaction seems to be an inexpensive alternative to the palladium-catalyzed process.     

Cryptand-22 as an efficient ligand for the copper-catalyzed cross-coupling reaction of diorgano dichalcogenides with terminal alkynes leading to the synthesis of alkynyl chalcogenides

A general and efficient method for the cross-coupling reaction of diorgano dichalcogenides with terminal alkynes using copper iodide/cryptand-22 (CuI/C22) has been developed. This protocol gave alkynyl chalcogenides in moderate to excellent yields in the presence of K₃PO₄ as the base under aerobic conditions.     

CuI/iodine-mediated homocoupling reaction of terminal alkynes to 1,3-diynes

A facile and efficient pathway for CuI/iodine-mediated homocoupling reaction of terminal alkynes to symmetrical 1,4-disubstituted 1,3-diynes in good to excellent yields was reported.     

Fast, ligand- and solvent-free synthesis of 1,4-substituted buta-1,3-diynes by Cu-catalyzed homocoupling of terminal alkynes in a ball mill

A method for the Glaser coupling reaction of alkynes by using a vibration ball mill has been developed. The procedure avoids the use of ligands and solvents during the reaction. Aryl- and alkyl-substituted terminal alkynes undergo homocoupling if coground with KF-Al(2)O(3) and CuI as a milling auxiliary and catalyst. Furthermore, an alternative protocol has been developed incorporating 1,4-diazabicyclo[2.2.2]octane (DABCO) as an additional base allowing the use of KF-Al(2)O(3) with a lower KF loading. Besides Cu salts, the homocoupling of phenylacetylene is also catalyzed by Ni or Co salts, as well as by PdCl(2). TMS-protected phenylacetylene could be directly converted into the homocoupling product after in situ deprotection of the alkyne by fluoride-initiated removal of the trimethylsilyl group.     

Green synthesis of 1,3-diynes from terminal acetylenes under solvent-free conditions

Herein, we report the microwave-assisted synthesis of 1,3-diynes from terminal acetylenes, catalyzed by CuI and tetramethylethylenediamine, in the presence of air as the oxidant, at 100 °C for only 10 min under solvent-free conditions. This efficient methodology allowed the homocoupling of several terminal alkynes in moderate to excellent yields. Moreover, the same protocol was also applicable for the synthesis of some unsymmetrical 1,3-diynes through the cross-coupling reaction.     

Palladium-catalyzed Sonogashira cross-coupling of organic tellurides with alkynes

Alkyl aryl tellurides and a tellurol ester were used as coupling partners in Pd(0)-catalyzed Sonogashira reactions. Microwave-assisted reactions of alkyl aryl tellurides with alkynes in the presence of CuI and catalytic amounts of Pd(PPh₃)₄ produced alkynyl arenes. Similarly, a tellurol ester on reaction with alkynes afforded alkynyl phenyl ketones in the presence of CuI and a catalytic amount of Pd(PPh₃)₄ at room temperature.     

Diorganyl tellurides as substrates in Sonogashira coupling reactions under mild conditions

Abstract

A new method of Sonogashira coupling reactions between diorganyl tellurides and terminal alkynes is reported. The coupling reactions are performed using Pd(dppf)Cl₂ as a catalyst, CuI as a co-catalyst in the presence of K₂CO₃ in DMSO. The reactions are carried out at room temperature and completed within 2?h when phenyl acetylene is used as a terminal alkyne. For aliphatic terminal alkynes, such as 1-hexyne and 1-octyne, an elevated temperature and longer reaction time are needed for the completion of the reactions. This process results in good yields of Sonogashira coupling products which is applicable for diaryl, divinyl and dialkynyl tellurides but not applicable for dialkyl tellurides.     

Synthesis of trans‐Disubstituted Alkenes by Cobalt‐Catalyzed Reductive Coupling of Terminal Alkynes with Activated Alkenes

A cobalt‐catalyzed reductive coupling of terminal alkynes, RC?CH, with activated alkenes, R′CH?CH₂, in the presence of zinc and water to give functionalized trans‐disubstituted alkenes, RCH?CHCH₂CH₂R′, is described. A variety of aromatic terminal alkynes underwent reductive coupling with activated alkenes including enones, acrylates, acrylonitrile, and vinyl sulfones in the presence of a CoCl₂/P(OMe)₃/Zn catalyst system to afford 1,2‐trans‐disubstituted alkenes with high regio‐ and stereoselectivity. Similarly, aliphatic terminal alkynes also efficiently participated in the coupling reaction with acrylates, enones, and vinyl sulfone, in the presence of the CoCl₂/P(OPh)₃/Zn system providing a mixture of 1,2‐trans‐ and 1,1‐disubstituted functionalized terminal alkene products in high yields. The scope of the reaction was also extended by the coupling of 1,3‐enynes and acetylene gas with alkenes. Furthermore, a phosphine‐free cobalt‐catalyzed reductive coupling of terminal alkynes with enones, affording 1,2‐trans‐disubstituted alkenes as the major products in a high regioisomeric ratio, is demonstrated. In the reactions, less expensive and air‐stable cobalt complexes, a mild reducing agent (Zn) and a simple hydrogen source (water) were used. A possible reaction mechanism involving a cobaltacyclopentene as the key intermediate is proposed.     

3-Iodo-4-chalcogen-2H-benzopyran as a convenient precursor for the sonogashira cross-coupling: synthesis of 3-alkynyl-4-chalcogen-2H-benzopyrans

3-Iodo-4-chalcogen-2H-benzopyran derivatives underwent a direct Sonogashira cross-coupling reaction with several terminal alkynes in the presence of a catalytic amount of Pd(PPh₃)₂Cl₂ with CuI as a co-catalyst, using Et₃N as base and solvent. This cross-coupling reaction proceeded cleanly under mild conditions and was performed with propargylic alcohols, propargylic ethers, as well as alkyl and aryl alkynes, furnishing the correspondent 3-alkynyl-4-chalcogen-2H-benzopyrans in good yields.     

CuI‐catalyzed homocoupling of terminal alkynes to 1,3‐diynes

A simple and efficient protocol for CuI‐catalyzed oxidative homocoupling reaction of terminal alkynes to symmetrical 1,4‐disubstituted 1,3‐diynes was reported. The reaction can be carried out in the open air, using NaOAc as a base in the absence of any other additives. A variety of terminal alkynes were converted to the corresponding 1.3‐diynes in good to excellent yields without any side product formation. Copyright © 2010 John Wiley & Sons, Ltd.