SERS based aptasensor for ochratoxin A by combining Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@Au magnetic nanoparticles and Au-DTNB@Ag nanoprobes with multiple signal enhancement

A SERS-based aptasensor for ochratoxin A (OTA) is described. It is making use of Fe₃O₄@Au magnetic nanoparticles (MGNPs) and of Au@Ag nanoprobes modified with the Raman reporter 5,5-dithiobis-(2-nitrobenzoic acid; DTNB). Au-DTNB@Ag NPs were modified with the OTA aptamer (aptamer-GSNPs) and used as Raman signal probes. The SERS peak of DTNB at 1331 cm^?1 was used for quantitative analysis. MGNPs modified with cDNA (cDNA-MGNPs) were used as capture probes and reinforced substrates. When the Au-DTNB@Ag-Fe₃O₄@Au complexes are formed through oligonucleotide hybridization, the Raman signal intensity of the Raman probe is significantly enhanced. If the OTA concentration in samples increases, more Raman signal probes (aptamer-GSNPs) will dissociate from the cDNA-MGNPs because more OTA aptamer is bound by OTA. This leads to a lower Raman signal after magnetic separation. Under the optimal conditions, the detection limit for OTA is 0.48 pg·mL^?1 based on 3σ criterion. This is attributed to the multiple Raman signal enhancement and the good performance of the OTA aptamer. The good recovery and accuracy of the assay was confirmed by evaluating spiked samples of wine and coffee.

Open image in new window

Graphical abstract Schematic of an aptamer based SERS assay for OTA by integrating Fe₃O₄@AuNPs (MGNPs) with Au-DTNB@Ag NPs with multiple signal enhancement. Aptamer modified Au-DTNB@Ag NPs are used as Raman probes, and MGNPs modified with cDNA are used as capture probes and reinforced substrates.

     

Coordination Chemistry of the Magic Inorganic Building Block {Fe<Superscript>II</Superscript>[Mo<Subscript>6</Subscript>P<Subscript>4</Subscript>O<Subscript>31</Subscript>]<Subscript>2</Subscript>}: Hydrothermal Synthesis and Crystal Structure of a New Reduced Ferrous Molybdophosphate

A new reduced ferrous molybdophosphate composite solid of the formula, [(C₁₀H₁₄N₂)H]₄[Fe^II ₁₀Mo^V ₂₄(H₂PO₄)₄(HPO₄)₁₂(PO₄)₄(H₂O)₁₆(OH)₁₆O₄₄]·12H₂O, has been synthesized from a reaction mixture of MoO₃, FeSO₄·7H₂O, C₂H₂O₄·2H₂O, nicotine, H₃PO₄, and H₂O under hydrothermal conditions. The crystal data: monoclinic, space group C2/m, a = 24.4349(124), b = 12.9935(66), c = 14.7281(74) Å, β = 104.87(1) Å, V = 4520(4) Å³, Z = 2, R ₁  = 0.0874, wR ₂  = 0.2179. The structure is built from the building blocks of the formula, {Fe^II[Mo₆P₄O₃₁]₂}, consisting of a network of MO₆ (M = Fe, Mo) octahedral and PO₄ tetrahedral linked through their vertices. The connectivity of the building blocks with two pairs of face-sharing dinuclear Fe(II) clusters of the formula of [Fe^II ₂(H₂O)₄O₅] on which a phosphate group is hanging gives rise to one-dimensional chains with eight-membered apertures. The remarkable hydrogen bonded interactions between the chains form a unique and interesting framework with three-dimensional intersecting tunnels where the protonated nicotine molecules as structuring templates and crystallization water molecules are situated.     

Fluorometric determination of <Emphasis Type="Italic">Vibrio parahaemolyticus</Emphasis> using an F<Subscript>0</Subscript>F<Subscript>1</Subscript>-ATPase-based aptamer and labeled chromatophores

An F₀F₁-ATPase-based aptasensor is described for the fluorometric determination of Vibrio parahaemolyticus. Chromatophores containing F₀F₁-ATPases were first prepared from Rhodospirillum rubrum cells. Then, an aptamer-functionalized chromatophore acts as the capture probe, and a chromatophore labeled with the pH probe fluorescein acts as the signalling probe. In the presence of V. parahaemolyticus, the rotation rate of F₀F₁-ATPase is decreased due to the formation of the aptamer-chromatophore complex. This leads to a retarded proton flux out of the chromatophores. As a result, the pH value inside the chromatophores is reduced, and the fluorescence of the pH probe F1300 is accordingly decreased. The relative fluorescence varies linearly over the 15 to 1.5?×?10⁶ cfu·mL^?1 Vibrio parahaemolyticus concentration range, and the limit of detection is 15 cfu·mL^?1. The method was applied to analyze artificially contaminated salmon samples where it showed excellent perfomance.

Open image in new window

Graphical abstract In this assay, aptamer functionalized chromatophores act as a capture probe, and the fluoresce in labeled chromatophores as signalling probe. The formation of aptamer-chromatophore complex leads to a retarded proton flux out of the chromatophores. As a result, the pH value inside the chromatophores is reduced, and fluorescence intensity is accordingly decreased.

     

Electrochemical sensor using graphene/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanosheets functionalized with garlic extract for the detection of lead ion

Based on the modulated electronic properties of Fe₃O₄-graphene (Fe₃O₄/GN composite) as well as the outstanding complexation between Pb²⁺ and natural substances garlic extract (GE), a novel electrochemical sensor for the determination of Pb²⁺ in wastewater was prepared by immobilization of Fe₃O₄/GN composite integrated with GE onto the surface of glassy carbon electrode (GCE). Fe₃O₄/GN composite was employed as an electrochemical active probe for enhancing electrical response by facilitating charge transfer while GE was used to improve the selectivity and sensitivity of the proposed sensor to Pb²⁺ assay. The electrochemical sensing performance toward Pb²⁺ was appraised by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and square wave voltammetry (SWV). Under the optimized condition, the sensor exhibited two dynamic linear ranges (LDR) including 0.001 to 0.5 nM and 0.5 to 1000 nM with excellent low detection limit (LOD) of 0.0123 pM (S/N =?3) and quantification limit (LOQ) of 0.41 pM (S/N =?10). Meanwhile, it displayed remarkable stability, reproducibility (RSD of 3.61%, n =?3), and selectivity toward the assay for the 100-fold higher concentration of other heavy metal ions. Furthermore, the novel sensor has been successfully employed to detect Pb²⁺ from real water samples with satisfactory results.     

Molecular mechanism of propane oxidative dehydrogenation on surface oxygen radical sites of VO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>/TiO<Subscript>2</Subscript> catalysts

Minimum energy pathways of propane oxidative dehydrogenation to propene and propanol on supported vanadium oxide catalyst VO _x /TiO₂ were studied by periodic discrete Fourier transform (DFT) using a surface oxygen radical as the active site. The propene formation pathway was shown to consist of two consecutive hydrogen abstraction steps. The first step includes C_β–H bond activation of propane followed by the formation of a surface hydroxyl group V–O _t H and a propyl radical n-C₃H₇. This step with the activation energy E* = 0.56 eV (54.1 kJ/mol) appears to be rate-determining. The second step involves the reaction of the bridging O _b oxygen atom with the methylene C–H bond of propyl radical n-C₃H₇ followed by the formation of a hydroxylated surface site HO _t –V⁴⁺–O _b H and propene. The initial steps of the C–H bond activation during propane conversion to propanol and propene by ODH on V⁵⁺–(O _t O _b )^? active sites are identical. The obtained results demonstrate that participation of surface oxygen radicals as the active sites of propane ODH makes it possible to explain relatively low activation energies observed for this reaction on the most active catalysts. The presence of very active radical species in low concentration seems to be the key factor for obtaining high selectivity.     

Synthesis and characterization of a new monophosphate (C<Subscript>6</Subscript>H<Subscript>16</Subscript>N<Subscript>2</Subscript>)(H<Subscript>2</Subscript>PO<Subscript>4</Subscript>)<Subscript>2</Subscript>

Chemical preparation, crystal structure, and NMR spectroscopy of a new trans-2,5-dimethylpiperazinium monophosphate are given. This new compound crystallizes in the triclinic system, with the space group P-1 and the following parameters: a = 6.5033(3), b = 7.6942(4), c = 8.1473(5) Å, α = 114.997(3), β = 92.341(3), γ = 113.136(3), V = 329.14(3) ų, Z = 1, and D_x = 1.565 g cm^?3. The crystal structure has been determined and refined to R = 0.030 and R _w(F ²) = 0.032 using 1558 independent reflections. The structure can be described as infinite [H₂PO₄] _n ^n? chains with (C₆H₁₆N₂)²⁺ organic cations anchored between adjacent polyanions to form columns of anions and cations running along the b axis. This compound has also been investigated by IR, thermal, and solid-state, ¹³C and ³¹P MAS NMR spectroscopies and Ab initio calculations.     

<Emphasis Type="Italic">cis</Emphasis>-Dioxomolybdenum(VI) complexes of sterically encumbered phenol-based tetradentate N<Subscript>2</Subscript>O<Subscript>2</Subscript> ligands: Structural,spectroscopic, and electrochemical studies

Two cis-dioxomolybdenum(VI) complexes [MoO₂L] (L: L ¹, 2 and L: L ², 3) in a phenol-based sterically encumbered N₂O₂ ligand environment have been synthesized, and their crystallographic characterizations are reported. The orange crystals of 2 are monoclinic, space group P2₁/a with unit cell dimensions as a=16.2407(17) Å, b=7.2857(8) Å, c=18.400(2) Å, β=98.002(9)°, Z=4, and d _cal=1.486 g cm^?3. The light orange crystals of 3, however, are orthorhombic, space group, Pbcn, with unit cell dimensions a=8.3110(12) Å, b=12.637(3) Å, c=34.673(5) Å, Z=4, and d _cal=1.187 g cm^?3. The structures were refined by a full-matrix least-squares procedure on F ² to a final R=0.046 (0.055 for 3) using 4944 (3677) all independent data. In both the cases, the Mo atom exists in a distorted octahedral geometry defined by a N₂O₄ donor set, which features a cis-Mo(–O)₂ and a trans-Mo(OPh)₂ arrangement. Compound 2 undergoes a quasireversible one-electron reduction at ?1.3 V vs Ag/AgCl reference due to Mo^VIO₂/Mo^VO₂ electron transfer and thus providing a rare example of steric solution to the comproportionation–dimerization problem encountered frequently in the development of valid biomimetic models for the active sites of oxomolybdenum enzymes.     

Synthesis,structural, and electrochemical properties of NaCo(PO<Subscript>3</Subscript>)<Subscript>3</Subscript> cathode for sodium-ion batteries

A new Co-base sodium metaphosphate compound, NaCo(PO₃)₃, has been synthesized here by solid-state method. The crystal structure is refined by the Rietveld method, and the results reveal that NaCo(PO₃)₃ has an orthorhombic structure with the space group of P2 ₁ 2 ₁ 2 ₁ and lattice parameters of a = 14.2453(2) Å, b = 14.2306(1) Å, and c = 14.2603(2) Å. Its typical morphology and chemical composition are confirmed by scanning electron microscopy (SEM) and energy-dispersive spectrometry (EDS). The valence states of all elements and the internal/external vibrational modes of NaCoP₃O₉ compound are measured by X-ray photoelectron and vibrational spectrum, where a typical feature of the (PO₃)^? polyanion group is observed. Meanwhile, the electrochemical properties of NaCo(PO₃)₃ cathode for sodium-ion batteries are also elevated and an initial discharge capacity of 33.8 mAh/g can be obtained at 0.05 C within 1.5–4.2 V. After 20 cycles, a discharge capacity of 26.7 mAh/g can be obtained and a well-kept oxidation–reduction plateau is still observed for NaCo(PO₃)₃ cathode, indicating the good reversibility of this metaphosphate electrode.     

High-temperature heat capacity and thermodynamic properties of pyrovanadate Pb<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript> and orthovanadate Pb<Subscript>3</Subscript>(VO<Subscript>4</Subscript>)<Subscript>2</Subscript>

The heat capacities of Pb₂V₂O₇ and Pb₃(VO₄)₂ as a function of temperature in the range 350–965 K have been studied by the differential scanning calorimetry method. The C_P = f(T) curve for Pb₂V₂O₇ is described by the equation C_p = (230.76 ± 0.51) + (73.60 ± 0.50)×10^-3T ? (18.38 ± 0.54)×10⁵T^-2 in the entire temperature range. For Pb₃(VO₄)₂, there is a well-pronounced extreme point in the C_P = f(T) curve at T = 371.5 K, which is caused by the existence of a structural phase transition. The thermodynamic properties of the oxide compounds have been calculated.     

Synthesis and X-ray diffraction study of ferrites ErM<Superscript>I</Superscript>Fe<Subscript>2</Subscript>O<Subscript>5</Subscript> (M<Superscript>I</Superscript> = Li,Na, K,Cs)

Ferrites of composition ErM^IFe₂O₅ (M^I = Li, Na, K, Cs) were synthesized by a solid-phase method. The structure of the ferrites was for the first time studied by X-ray powder diffraction. Crystal systems, unit cell parameters, and X-ray and pycnometric densities were determined. For ErLiFe₂O₅, a = 10.510 Å, c = 14.270 Å, V°= 1616.16 ų, Z = 16, V _subcell ^° = 101.01 ų, ρ_x = 6.01 g/cm³, ρ_pyc = 5.97 ± 0.04 g/cm³; for ErNaFe₂O₅, a = 10.519 Å, c = 15.510 Å, V° = 1759.56 ų, Z = 16, V _subcell ^° = 109.90 ų, ρ_x = 5.77 g/cm³, ρ_pyc = 5.72 ± 0.08 g/cm³; for ErKFe₂O₅, a = 11.050 Å, c = 15.480 Å, V° = 1937.33 ų, Z = 16, V _subcell ^° = 121.08 ų, ρ_x = 5.46 g/cm³, ρ_pyc = 5.41 ± 0.04 g/cm³; and for ErCsFe₂O₅, a = 10.78 Å, c = 16.01 Å, V° = 1905.37 ų, Z = 16, V _subcell ^° = 119.09 ų, ρ_x = 6.86 g/cm³, ρ_pyc = 6.61 ± 0.01 g/cm³.     

Refinement of LiFe<Subscript>5</Subscript>O<Subscript>8</Subscript> crystal structure

The crystal structure and the formation conditions of crystals of the LiFe₅O₈ ordered phase obtained from the solution-melt of the Bi₂O₃-Fe₂O₃-B₂O₃-LiCl quadruple system are refined. The crystals are black, octahedral, of cubic symmetry (space group P4₃32). Unit cell parameters: a = 8.3339(1) Å, V = 578.82(1) ų, Z = 4, d _calc = 4.753 g/cm³. From 6046 of the collected array I _hkl 358 are independent (R _int = 0.0321). As a result of anisotropic refinement of structural parameters, R ₁ factor is found to be 0.0186 (wR ₂ = 0.0467). Lithium atoms are in octahedral environment, Li-O is 2.109(1) Å; iron atoms are of two types: in octahedra with Fe-O (by two) distances of 1.9586(9) Å, 2.0152(9) Å, and 2.0652(10) Å and tetrahedra with Fe-O (three) 1.8848(10) Å and 1.914(2) Å. The structure is of inverted spinel type.     

Crystal structures of Ti(NH<Subscript>4</Subscript>)<Subscript>2</Subscript>P<Subscript>4</Subscript>O<Subscript>13</Subscript> and Sn(NH<Subscript>4</Subscript>)<Subscript>2</Subscript>P<Subscript>4</Subscript>O<Subscript>13</Subscript>

The characteristics of crystal structures of the titanium(IV) diammonium (Ti(NH₄)₂P₄O₁₃) and tin(IV) diammonium (Sn(NH₄)₂P₄O₁₃) tetraphosphates, which are isostructural with similar silicon(IV) and germanium(IV) salts, have been obtained by the Rietveld method using X-ray powder diffraction data. The compounds crystallize in the triclinic system, space group P \(\overline 1 \), Z = 2, a = 15.0291(7) Å, b = 7.9236(4) Å, c = 5.0754(3) Å, α = 99.168(3)°, β = 97.059(3)°, γ = 83.459(3)° for Ti(NH₄)₂P₄O₁₃ and a = 15.1454(7) Å, b = 8.0103(5) Å, c = 5.1053(3) Å, α = 99.898(6)°, β = 96.806(3)°, γ = 83.881(4)° for Sn(NH₄)₂P₄O₁₃. The structure is refined in the isotropic approximation using the pseudo-Voigt function: R _p = 0.077, R _Bragg = 0.045, R _F = 0.057 for Ti(NH₄)₂P₄O₁₃; R _p = 0.082, R _Bragg = 0.044, R _F = 0.046 for Sn(NH₄)₂P₄O₁₃. The hydrogen atoms of the ammonium cations are placed in the calculated positions. A comparative analysis of the structures of the compounds of the M^IV(NH₄)₂P₄O₁₃ (M^IV = Si, Ge, Ti, Sn) series has been carried out.     

Thermal properties,phase transitions,vibrational and reorientational dynamics of [Mn(NH<Subscript>3</Subscript>)<Subscript>6</Subscript>](NO<Subscript>3</Subscript>)<Subscript>2</Subscript>

[Mn(NH₃)₆](NO₃)₂ crystallizes in the cubic, fluorite (C1) type crystal lattice structure (Fm \( \overline{3} \) m) with a = 11.0056 Å and Z = 4. Two phase transitions of the first-order type were detected. The first registered on DSC curves as a large anomaly at T _C1 ^h  = 207.8 K and T _C1 ^c  = 207.2 K, and the second registered as a smaller anomaly at T _C2 ^h  = 184.4 K and T _C2 ^c  = 160.8 K (where the upper indexes h and c denote heating and cooling of the sample, respectively). The temperature dependence of the full width at half maximum of the band associated with the δ_s(HNH)F_1u mode suggests that the NH₃ ligands in the high temperature and intermediate phase reorientate quickly with correlation times in the order of several picoseconds and with activation energy of 9.9 kJ mol^?1. In the phase transition at T _C2 ^c probably only a some of the NH₃ ligands stop their reorientation, while the remainders continue to reorientate quickly with activation energy of 7.7 kJ mol^?1. Thermal decomposition of the investigated compound starts at 305 K and continues up to 525 K in four main stages (I–IV). In stage I, ²/₆ of all NH₃ ligands were seceded. Stages II and III are connected with an abruption of the next ²/₆ and ¹/₆ of total NH₃, respectively, and [Mn(NH₃)](NO₃)₂ is formed. The last molecule of NH₃ per formula unit is freed at stage IV together with the simultaneous thermal decomposition of the resulting Mn(NO₃)₂ leading to the formation of gaseous products (O₂, H₂O, N₂ and nitrogen oxides) and solid MnO₂.     

Chromites YbMCr<Subscript>2</Subscript>O<Subscript>5</Subscript> (M = Li,Na, K,Cs): X-ray diffraction study

Ytterbium alkali-metal chromites YbMCr₂O₅ (M = Li, Na, K, Cs) were synthesized by a ceramic procedure from the corresponding oxides and carbonates. Their crystal systems and unit cell parameters were determined by the homology method: for YbLiCr₂O₅, a = 10.34 Å, b = 10.62 Å, c = 15.05 Å, Z = 16, V ^o = 1653.74 ų, ρ_X-ray = 5.85 g/cm³, ρ_pycn = 5.81 ± 0.03 g/cm³; for YbNaCr₂O₅, a = 10.30 Å, b = 10.56 Å, c = 16.46 Å, Z = 16, V ^o = 1790.32 ų, ρ_X-ray = 5.64 g/cm³, ρ_pycn = 5.59 ± 0.07 g/cm³; for YbKCr₂O₅, a = 10.33 Å, b = 10.63 Å, c = 19.93 Å, Z = 16, V ^o = 2188.47 ų, ρ_X-ray = 5.95 g/cm³, ρ_pycn = 5.91 ± 0.03 g/cm³; and for YbCsCr₂O₅, a = 10.34 Å, b = 10.63 Å, c = 18.43 Å, Z = 16, V ^o = 2025.72 ų, ρ_X-ray = 5.19 g/cm³, ρ_pycn = 5.16 ± 0.05 g/cm³.     

Synthesis and magnetic properties of quasi-unidimensional oxide Sr<Subscript>6.3</Subscript>Rh<Subscript>2.35</Subscript>Mn<Subscript>2.35</Subscript>O<Subscript>15</Subscript>

Attempts of the synthesis in air of complex oxides Sr₃RhMnO_x and Sr₄Rh_1.5Mn_1.5O_x resulted in revealing formation of a new oxide phase Sr_6.3Rh_2.35Mn_2.35O₉ related to quasi-unidimensional family A_3n+3m A′ _n B_3m+n O_9m+6n at n = 1 and m = 1. Its structural characteristics and magnetic properties are studied. X-ray data of the obtained phase is indicated on the basis of trigonal cell (spatial group P321) with the parameters: a 9.6239(4) Å; c ₁ 4.1130(4) Å, c ₂ 2.4946(2) Å. Manganese and rhodium exist in the compound as the cations Mn⁴⁺, Rh³⁺ and Rh⁴⁺, as follows from the data of measuring of magnetic susceptibility in the range 2–300 K.     

Bismuth aluminoborate Bi<Subscript>0.96</Subscript>Al<Subscript>2.37</Subscript>(B<Subscript>4</Subscript>O<Subscript>10</Subscript>)O: Synthesis and crystal structure

The crystal structure of a new bismuth aluminoborate Bi_0.96Al_2.37(B₄O₁₀)O is studied by single-crystal X-ray diffraction. The Bi_0.96Al_2.37(B₄O₁₀)O single crystals are hexagonal (space group \(P\bar 6\) 2m). The unit cell parameters are as follows: a = b = 4.587(4) Å, c = 2.253(9) Å, α = β = 90°, γ = 120°, V = 168.60 ų, Z = 1.     

Synthesis,structure, and properties of V<Subscript>2</Subscript>O<Subscript>3</Subscript>(XO<Subscript>4</Subscript>)<Subscript>2</Subscript> (X = S,Se)

Compounds described as V₂O₃(XO₄)₂, where X = S or Se, were prepared from vanadium(V) oxide mixtures with concentrated sulfuric and selenic acids. The physicochemical properties of the products were studied; for V₂O₃(SeO₄)₂, the crystal structure was determined by powder X-ray diffraction and neutron diffraction, and its key differences from the structure of V₂O₃(SO₄)₂ were identified. V₂O₃(SeO₄)₂ crystallizes in the monoclinic system with the unit cell parameters a = 15.3831(2)Å, b = 5.54096(5)Å, c = 9.71644(7)Å, β = 111.886(1)°, V = 768.51ų, space group C2/c (no. 15).     

X-Ray diffraction data for new ferrites ErMFe<Subscript>2</Subscript>O<Subscript>5</Subscript> (M = Li,Na, K)

New ferrites ErMFe₂O₅ (M = Li, Na, K) were synthesized from erbium and iron(III) oxides and lithium, sodium, and potassium carbonates by solid-state annealing. According to X-ray powder diffraction, these compounds crystallize in the orthorhombic system with the following unit cell parameters: ErLiFe₂O₅, a = 10.510 Å, b = 10.776 Å, c = 14.270 Å, V ⁰ = 1616.16 ų; Z = 16, V _subcell ⁰ = 101.01 ų, ρ_X = 6.01 g/cm³, ρ_pycn = 5.97 ± 0.05 g/cm³; ErNaFe₂O₅, a = 10.519 Å, b = 10.785 Å, c = 15.510 Å, V ⁰ = 1759.56 ų, Z = 16, V _subcell ⁰ = 109.90 ų, ρ_X = 5.77 g/cm³, ρ_pycn = 5.72 ± 0.08 g/cm³; ErKFe₂O₅, a = 10.050 Å, b = 11.320 Å, c = 15.480 Å, V ⁰ = 1937.33 ų, Z = 16, V _subcell ⁰ = 121.08 ų, ρ_X = 5.46 g/cm³, ρ_pycn = 5.41 ± 0.04 g/cm³.     

Fabrication and characterisation of a mixed oxide-covered mesh electrode composed of NiCo<Subscript>2</Subscript>O<Subscript>4</Subscript> and its capability of generating hydroxyl radicals during the oxygen evolution reaction in electrolyte-free water

A mixed oxide-covered mesh electrode composed of NiCo₂O₄ (MOME-NiCo₂O₄) was prepared on a stainless-steel substrate using thermal decomposition (slow-cooling rate method). Surface, bulk and electrochemical properties of MOME were studied using different techniques, namely scanning electron microscopy (SEM), X-ray diffraction (XRD), cyclic voltammetry (CV) with determination of the electrochemical porosity (?) and morphology factor (φ) parameters, quasi-stationary polarisation curves (PC) and electrochemical impedance spectroscopy (EIS). SEM images revealed a good coverage of the metallic wires by a compact oxide layer (absence of cracks). XRD analysis confirmed the formation of the spinel NiCo₂O₄ with the presence of NiO. The ‘in situ’ surface parameters denoted as ? and φ exhibited values of 0.39 and 0.33, respectively, revealing that the electrochemically active surface area is mainly confined to the ‘outer/external’ surface regions of the oxide layer. The PC was characterised by two Tafel slopes distributed in the low (b ₁ = 46 mV dec^?1) and high (b ₂ = 59 mV dec^?1) overpotential domains. The corresponding apparent exchange current densities were j ₀₍₁₎ = (3.43 ± 0.11) × 10^?6 A cm^?2 and j ₀₍₂₎ = (6.70 ± 0.08) × 10^?6 A cm^?2, respectively. The EIS study accomplished in the low-overpotential domain revealed a Tafel slope (b ₁) of 51 mV dec^?1. According to the spin-trapping reaction using N,N-dimethyl-p-nitrosoaniline (RNO), the MOME-NiCo₂O₄ electrode exhibited good performance for the generation of weakly adsorbed hydroxyl radicals (HO^?) during the OER in electrolyte-free water.     

Synthesis and X-ray investigation of Rb<Subscript>2</Subscript>[Pd(NO<Subscript>3</Subscript>)<Subscript>4</Subscript>] and Cs<Subscript>2</Subscript>[Pd(NO<Subscript>3</Subscript>)<Subscript>4</Subscript>]

Powder and single crystal X-ray diffraction studies have been performed for anhydrous nitrate complexes Rb₂[Pd(NO₃)₄] (I) and Cs₂[Pd(NO₃)₄] (II). Crystal data for I: a = 7.843(1) Å, b = 7.970(1) Å, c = 9.725(1) Å; β = 100.39(1)°, V = 597.9(1) Å ³, space group P2₁/c, Z = 2, d _calc = 2.918 g/cm³; for II: a = 10.309(2) Å, b = 10.426(2) Å, c = 11.839(2) Å; β = 108.17(3)°, V = 1209.0(4) ų, space group P2₁/c, Z = 4, d ^calc = 3.408 g/cm³. The structures are formed by isolated [Pd(NO₃)₄]^2? complex anions and alkali metal cations. The plane-square environment of the Pd atom is formed from the oxygen atoms of the monodentate nitrate groups. The geometrical characteristics of the complex anions are analyzed. Compound II has a short contact Pd...Cs 3.252 Å.