Influence of heat treatment process in In<Subscript>2</Subscript>O<Subscript>3</Subscript>-MWCNTs as photoanode in DSSCs

Indium oxide-multi-walled carbon nanotubes (In₂O₃-MWCNTs) were prepared by sol-gel method for DSSCs. The synthesis of indium oxide (In₂O₃) was carried out by dissolving indium chloride (InCl₃) in a solvent of 2-methoxyethanol. Different annealing temperatures of 400, 450, 500, 550, and 600 °C were proposed in this study. The changes in the structural properties were analyzed by means of X-ray diffraction (XRD) and atomic force microscopy (AFM) analysis. The XRD spectrum estimated the average crystallite sizes of 3 nm for each sample. AFM results indicated very rough surface area of the films where it increased linearly from 1.8 to 11 nm as the annealing temperature increases. The In₂O₃-MWCNTs-based DSSC exhibited good photovoltaic performance with power conversion efficiency (η), photocurrent density (J _sc ), open circuit voltage (V _oc ), and fill factor (FF) of 1.13 %, 5.5 mA/cm², 0.53 V, and 0.42, respectively. Even though the film annealed at 450 °C exhibited low τ _eff, it achieved the greatest D _eff of 29.67 cm² s^?1 which provides an efficient pathway for the photogenerated electrons with minimum electron recombination loss that increased the J _sc and V _oc in the DSSC. The obtained structural and electron transport analysis was proposed as a suitable benchmark for In₂O₃-MWCNTs-based dye-sensitized solar cell (DSSCs) application. Hence, this study suggests that the optimum temperature for In₂O₃-MWCNTs is at annealing temperature of 450 °C prepared via sol-gel method.     

Controlled synthesis of photoluminescent Bi<Subscript>4</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> nanoparticles from metal-organic polymeric precursor

Bi₄Ti₃O₁₂ (BIT) nanoparticles with a narrow average particle size distribution in the range of 11–46 nm was synthesized via a metal-organic polymeric precursor process. The crystallite size and lattice parameter of BIT were determined by XRD analysis. At annealing temperatures >550 °C, the orthorhombic BIT compound with lattice parameters a = 5.4489 Å, b = 5.4147 Å, and c = 32.8362 Å was formed while at lower annealing temperatures orthorhombicity was absent. Reaction proceeded via the formation of an intermediate phase at 500 °C with a stoichiometry close to Bi₂Ti₂O₇. The particle size and the agglomerates of the primary particles have been confirmed by FESEM and TEM. The decomposition of the polymeric gel was ascertained in order to evaluate the crystallization process from TG-DSC analysis. Raman spectroscopy was used to investigate the lattice dynamics in BIT nanoparticles. In addition, investigation of the dependence of the visible emission band around the blue–green color emission on annealing temperatures and grain sizes showed that the effect of grain size plays important roles, and that oxygen vacancies may act as the radiative centers responsible for the observed visible emission band.     

Substitution effects on the bulk and surface properties of (Li,Ni)Mn<Subscript>2</Subscript>O<Subscript>4</Subscript>

Manganese oxides of spinel structure, LiMn₂O₄, Li_1-x Ni _x Mn₂O₄ (0.25 ≤ x≤ 0.75), and NiMn₂O₄, were studied by EDS, XRD, SEM, magnetic (M-H, M-T), and XPS measurements. The samples were synthesized by an ultrasound-assisted sol-gel method. EDS analysis showed good agreement with the formulations of the oxides. XRD and Rietveld refinement of X-ray data indicate that all samples crystallize in the Fd3m space group characteristic of the cubic spinel structure. The a-cell parameter ranges from a = 8.2276 Å (x = 0) to a = 8.3980 Å (x = 1). SEM results showed particle agglomerates ranging in size from 2.3 μm (x = 0) down to 0.8 μm (x = 1). Hysteresis magnetization vs. applied field curves in the 5–300K range was recorded. ZFC-FC measurements indicate the presence of two magnetic paramagnetic-ferrimagnetic transitions. The experimental Curie constant was found to vary from 5 to 7.1 cm³ K mol^?1 for the range of compositions studied (0 ≤ x ≤ 1). XPS studies of these oxides revealed the presence of Ni²⁺, Mn³⁺, and Mn⁴⁺. The experimental Ni/Mn atomic ratios obtained by XPS were in good agreement with the nominal values. A linear relationship of the average oxidation state of Mn with Ni content was observed. The oxide’s cation distributions as a function of Ni content from x = 0 ?Li⁺[Mn³⁺Mn⁴⁺]O₄ to x = 1 \( {\mathrm{Ni}}_{0.35}^{2+}{\mathrm{Mn}}_{0.65}^{3+}\left[{\mathrm{Ni}}_{0.65}^{2+}\right.\left.{\mathrm{Mn}}_{1.35}^{3+}\right]{\mathrm{O}}_4 \) were proposed.     

Charge storage behavior of nanostructures based on SiGe nanocrystals embedded in Al<Subscript>2</Subscript>O<Subscript>3</Subscript> matrix

The charge storage behavior of nanostructures based on Si_1?x Ge _x (0 ≤ x ≤ 1) nanocrystals (NCs) in an Al₂O₃ matrix was investigated. The structures have been grown by RF magnetron sputtering and subsequently annealed at temperatures ranging from 700 °C to 1000 °C for 30 min in nitrogen ambient. The stoichiometry of the SiGe NCs and the alumina crystalline structure were found to be significantly dependent on the RF power and the annealing temperature. The sizes of the SiGe NCs and their distribution were investigated by grazing incidence small angle X-ray scattering (GISAXS). The capacitance-voltage (C-V) and conductance-voltage (G-V) measurements were performed to investigate the charge trapping characteristics of the memory structures. The C-V hysteresis width depends on variations in the crystalline structure resulting from different annealing temperatures. It is also shown that charge injection is governed by the Fowler-Nordheim tunnel mechanism for higher electric fields.     

A new one-dimensional hybrid material lattice: AC conductivity and structural characterization of [C<Subscript>7</Subscript>H<Subscript>12</Subscript>N<Subscript>2</Subscript>][CdCl<Subscript>4</Subscript>]

The present paper reports the synthesis, crystal structure, ¹³C and ¹¹¹Cd cross-polarization magic-angle spinning nuclear magnetic resonance(CP-MAS-NMR) analysis and ac conductivity for a new organic–inorganic hybrid salt, [C₇H₁₂N₂][CdCl₄]. The compound crystallizes in the triclinic system, space group P\( \overline 1 \), with unit cell dimensions: a?=?7.1050(3) Å, b?=?8.9579(3) Å, c?=?9.4482(3) Å, α?=?81.415(1)°, β?=?89.710(2)°, γ?=?85.765(1)°, V?=?592.97(4) Å³, and Z?=?2. The asymmetric unit is composed of one-2,4-diammonium toluene cation and one [CdCl₄]^2? anion. The Cd atom is in a slightly distorted octahedra coordination environment. Its structure can be described by infinite chains of CdCl₆ octahedron linked to organic cations by a strong charge-assisted N–H???Cl interactions in order to build organic–inorganic layers staked along \( \left[ {0\overline 1 1} \right] \) direction. The solid state ¹³C CP-MAS-NMR spectra has shown seven isotropic resonances, confirming the existence of seven non-equivalent carbon atoms, which is consistent with crystal structure determined by X-ray diffraction. As for ¹¹¹Cd MAS-NMR, it has shown one cadmium site with isotropic chemical shift observed at 167.2 ppm. The complex impedance of the compound has been investigated in the temperature range of 403–460 K and in the frequency range of 200 Hz–5 MHz. The impedance plots have shown semicircle arcs at different temperatures and an electrical equivalent circuit has been proposed to explain the impedance results. The circuits consist of the parallel combination of bulk resistance R _p and constant phase elements.     

Acoustic emission and thermal expansion of Pb(Mg<Subscript>1/3</Subscript>Nb<Subscript>2/3</Subscript>)O<Subscript>3</Subscript> and Pb(Mg<Subscript>1/3</Subscript>Nb<Subscript>2/3</Subscript>)O<Subscript>3</Subscript>-PbTiO<Subscript>3</Subscript> crystals

The temperature dependence of the elongation per unit length for Pb(Mg_1/3Nb_2/3)O₃ crystals unannealed after growth and mechanical treatment is investigated in the course of thermocycling. It is revealed that this dependence deviates from linear behavior at temperatures below 350°C. The observed deviation is characteristic of relaxors, is very small in the first cycle, increases with increasing number n of thermocycles, and reaches saturation at n≥3. In the first cycle, a narrow maximum of the acoustic emission activity is observed in the vicinity of 350°C. In the course of thermocycling, the intensity of this maximum decreases and becomes zero at n>3. For (1?x)Pb(Mg_1/3Nb_2/3)O₃-xPbTiO₃ crystals, the dependence of the temperature of this acoustic emission maximum on x exhibits a minimum. It is assumed that the phenomena observed are associated with the phase strain hardening due to local phase transitions occurring in compositionally ordered and polar nanoregions.     

High-temperature complex impedance and modulus spectroscopic studies of doped Na<Subscript>0.5</Subscript>Bi<Subscript>0.5</Subscript>TiO<Subscript>3</Subscript>-BaTiO<Subscript>3</Subscript> ferroelectric ceramics

Lead-free Na_0.5Bi_0.5TiO₃ (NBT) and (1 ? x)Na_0.5Bi_0.5TiO₃ + xBaTiO₃ with x = 0.1 and 0.2 (where x = 0.1 and 0.2 are named as NBT1 and NBT2, respectively), (1 ? y)Na_0.5Bi_0.5TiO₃ + yBa_0.925Nd_0.05TiO₃ with y = 0.1 and 0.2 (where y = 0.1 and 0.2 are named as NBT3 and NBT4, respectively)-based relaxor ferroelectric ceramics were prepared using the sol-gel method. The crystal structure was investigated by X-ray diffraction (XRD) at room temperature (RT). The XRD patterns confirmed the presence of the rhombohedral phase in all the samples. The electrical properties of the present NBT-based samples were investigated by complex impedance and the modulus spectroscopy technique in the temperature range of RT–600 °C. The AC conductivity was found to increase with the substitution of Ba²⁺ ions to the NBT sample whereas it significantly decreased with the addition of Nd³⁺ ions. The more anion vacancies in Ba-added samples and the lower anion vacancies in Nd-added samples were found to be responsible for higher and lower conductivities, respectively.     

Electrospun Dy-doped SrFe<Subscript>12</Subscript>O<Subscript>19</Subscript> nanofibers: microstructure and magnetic properties

SrDy _x Fe_12?x O₁₉ (x ≤ 0.08) nanofibers have been synthesized by the electrospinning method followed by calcinations process. The partial substitution of rare earth ions Dy³⁺ (10.5 μ _B of magnetic moments) mainly occupying 12k sublattice sites in the SrFe₁₂O₁₉ crystal structure is investigated and discussed in this work. An enhanced coercivity of 7155 Oe has been obtained when the doped content reached to 0.08 at a relative low calcination temperature of 800 °C. As a result, we believe the synthesized SrDy _x Fe_12?x O₁₉ nanofibers can potentially be useful in high-density recording media as well as permanent magnets.     

Influence of substrate temperature on certain physical properties and antibacterial activity of nanocrystalline Ag-doped In<Subscript>2</Subscript>O<Subscript>3</Subscript> thin films

Nanocrystalline Ag-doped indium oxide (AIO) thin films, by employing a much simplified spray pyrolysis technique in different substrate temperatures (300, 350, 400 and 450°C), were fabricated for the first time. The deposited films were subjected to various characterization studies, to explore certain features like the influence of various deposition temperatures on physical and antibacterial properties. XRD results showed that all the samples exhibited preferential orientation along the (2 2 2) plane. The variation in the crystalline size with increasing substrate temperature was explained on the basis of the Zener pinning effect. The electrical sheet resistance (R _sh) was found to decrease sharply with increasing substrate temperature and attained a minimum value \((62{\Omega } /\Box \)) at 400°C and then started increasing for higher deposition temperatures. Further, PL emission spectra of the samples in the visible range ascertained the possibility of applicability of the same in nanoscale optoelectronic devices. From the studies, it was found that at 400°C deposition temperature, one could expect better antibacterial efficiency against Escherichia coli. The influence of the shape and size of AIO nanograins on the antibacterial activity was analysed using scanning electron microscopy images.     

NH<Subscript>4</Subscript>NO<Subscript>3</Subscript> as charge carrier contributor in glycerolized potato starch-methyl cellulose blend-based polymer electrolyte and the application in electrochemical double-layer capacitor

Potato starch (PS)-methyl cellulose (MC) blend solid biopolymer electrolytes infused with ammonium nitrate (NH₄NO₃) and glycerol as plasticizer are made via the solution cast technique. Fourier transform infrared (FTIR) spectroscopy indicates that NH₄NO₃ has interacted with the polymer blend host. The addition of 40 wt% glycerol in the highest conducting plasticizer free electrolyte has improved the conductivity to the order of ～10^?3 S cm^?1. The thermal stability of the electrolytes is identified by thermogravimetric analysis (TGA). Result from X-ray diffraction (XRD) analysis shows that the electrolyte with maximum conductivity value has the lowest degree of crystallinity. Differential scanning calorimetry (DSC) analysis reveals that the highest conducting plasticized electrolyte possesses the lowest glass transition temperature (T _g) of ?27.5 °C. Conductivity trend is further verified by dielectric analysis. Transference numbers of ion (t _ion) and electron (t _e) for the highest conducting electrolyte are identified to be 0.98 and 0.02, respectively, confirming that ions are the dominant charge carriers. Linear sweep voltammetry (LSV) evaluates that the potential window for the electrolyte is 1.88 V. The internal resistance of the electrochemical double-layer capacitor (EDLC) is between 29 and 64 Ω. From the charged-discharged measurement, the value of C _s is 31 F g^?1. The EDLC is stable over 1000 cycles.     

Photoionization of the Xe atom and Xe@C<Subscript>60</Subscript> molecule

Photoionization of the Xe atom and Xe@C₆₀ molecule have been studied usingthe random phase approximation with exchange (RPAE) method. The Xe atom was described byrelaxed orbitals including overlap integrals. The C₆₀ fullerene has beenrepresented by an attractive short range spherical well with potentialV(r), given byV(r) =  ?V ₀ forr _i  < r < r _o ,otherwise V(r) = 0 wherer _i andr _o are respectively, the inner and outerradii of the spherical shell. The time independent Schrödinger equation was solved usingboth regular and irregular solutions and the continuous boundary conditions atr _i andr _o . The results demonstrate improvementto previous calculations for both the Xe atom and Xe@C₆₀ molecule and comparevery well with the recent experimental data.     

The magnetization reversal in CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript>/CoFe<Subscript>2</Subscript> granular systems

The temperature-dependent field cooling (FC) and zero-field cooling (ZFC) magnetizations, i.e., M _FC and M _ZFC, measured under different magnetic fields from 500 Oe to 20 kOe have been investigated on two exchange–spring CoFe₂O₄/CoFe₂ composites with different relative content of CoFe₂. Two samples exhibit different magnetization reversal behaviors. With decreasing temperature, a progressive freezing of the moments in two composites occurs at a field-dependent irreversible temperature T _irr. For the sample with less CoFe₂, the curves of ?d(M _FC ? M _ZFC)/dT versus temperature T exhibit a broad peak at an intermediate temperature T ₂ below T _irr , and the moments are suggested not to fully freeze till the lowest measuring temperature 10 K. However, for the ?d(M _FC ? M _ZFC)/dT curves of the sample with more CoFe₂, besides a broad peat at an intermediate temperature T ₂, a rapid rise around the low temperature T ₁~15 K is observed, below which the moments are suggested to fully freeze. Increase of magnetic field from 2 kOe leads to the shift of T ₂ and T _irr towards a lower temperature, and the shift of T ₂ is attributable to the moment reversal of CoFe₂O₄.

Open image in new window

Graphical abstract CoFe₂O₄/CoFe₂ composites with different relative content of CoFe₂ were prepared by reducing CoFe₂O₄ in H₂ for 4 h (S4H) and 8 h (S8H). The temperature-dependent FC and ZFC magnetizations, i.e., M _FC and M _ZFC, under different magnetic fields from 500 Oe to 20 kOe have been investigated. Two samples exhibit different magnetization reversal behaviors. With decreasing temperature, a progressive freezing of the moments in two composites occurs at field-dependent irreversible temperature T _irr. For the S4H sample, the curves of ?d(M _FC ? M _ZFC)/dT versus temperature T exhibit a broad and field-dependent relaxing peak at T ₂ below T _irr (figure a), and the moments were suggested not to fully freeze till the lowest measuring temperature 10 K. However, for the S8H sample, it exhibits the reentrant spin-glass state around 50 K, as evidenced by a peak in the M _FC curve (inset in figure b) and as a result of the cooperative effects of the random anisotropy of CoFe₂O₄, exchange–spring occurring at the interface of CoFe₂O₄ and CoFe₂ together with the inter-particle dipolar interaction (figure c); in ?d(M _FC ? M _ZFC)/dT curves, besides a broad relaxing peat at T ₂, a rapid rise around the low-temperature T ₁~15 K is observed, below which the moments are suggested to fully freeze. Increase of magnetic field from 2 kOe leads to the shift of T ₂ and T _irr towards a lower temperature, and the shift of T ₂ is attributable to the moment reversal of CoFe₂O₄.

     

Ionic displacements and structure of disordered PbFe<Subscript>1/2</Subscript>Nb<Subscript>1/2</Subscript>O<Subscript>3</Subscript>

A sequence of structural models of unit cells of complex oxides with perovskite-type structure has been constructed to refine the average structure of PbFe_1/2Nb_1/2O₃ (PFN) at temperatures above the ferroelectric Curie point (T _C ～ 110°C). Owing to the analysis of the probability theory considerations, each model is characterized by only two positional fitting parameters. With the use of the intensities of 95 symmetrically independent X-ray reflections from a PFN single crystal at 160°C, a model with the R factor below 3% (K = 2.44%) was chosen. The ravine method has been used to verify the existence of a single minimum for the R factor with respect to the fitting parameter.     

Electrical characterization of porous La-doped BaSnO<Subscript>3</Subscript> using impedance spectroscopy

A few compositions in the system Ba_1???x La _x SnO₃ (x?=?0.00, 0.01, 0.05, and 0.10) have been synthesized via the solid state ceramic route. The synthesized powders have been characterized using X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray analysis, Raman spectroscopy, Fourier transformation infrared, thermogravimetrical analysis, and differential thermal analysis techniques. The powder X-ray diffraction pattern of the samples confirms the formation of a single-phase solid solution only up to 0.50?≤?x. It was found that all the samples have a cubic crystal structure. The electrical properties of La-modified BaSnO₃ were studied using ac impedance spectroscopy technique over a wide range of temperatures (50–650 °C) in the frequency range of 10 Hz–13 MHz. The complex impedance plots above 300 °C show that total impedance is due to the contributions of grain and grain boundaries. The resistance of these contributions has been determined. Variation of these resistances with temperature shows the presence of two different regions with different slopes. The nature of the variation of conductivity of the grain and grain boundaries is different in different regions. Based on the value of activation energy, it is proposed that conduction via hopping of doubly ionized oxygen vacancies (V_O ^??) is taking place in the temperature region of 300–450 °C, whereas in the temperature region of 450–650 °C, it is due to proton, i.e., OH^? ions, hopping.     

Investigation on lithium ion conductivity and structural stability of yttrium-substituted Li<Subscript>7</Subscript>La<Subscript>3</Subscript>Zr<Subscript>2</Subscript>O<Subscript>12</Subscript>

Advanced Li-air battery architecture demands a high Li⁺ conductive solid electrolyte membrane that is electrochemically stable against metallic lithium and aqueous electrolyte. In this work, an investigation has been carried out on the microstructure, Li⁺ conduction behaviour and structural stability of Li₇La_3-x Y _x Zr₂O₁₂ (x = 0.125, 0.25 and 0.50) prepared by conventional solid-state reaction technique. The phase analysis of Li₇La_3-x Y _x Zr₂O₁₂ (x = 0.125, 0.25 and 0.50) sintered at 1200 °C by powder X-ray diffraction (PXRD) and Raman confirms the formation of high Li⁺ conductive cubic phase (\( Ia\overline{3}d \)) lithium garnets. Among the investigated lithium garnets, Li₇La_2.75Y_0.25Zr₂O₁₂ sintered at 1200 °C exhibits a maximized room temperature total (bulk + grain boundary) Li⁺ conductivity of 3.21 × 10^?4 S cm^?1 along with improved relative density of 96 %. The preliminary investigation on the structural stability of Li₇La_2.75Y_0.25Zr₂O₁₂ in the solutions of 1 M LiCl, dist. H₂O and 1 M LiOH at 30 °C/50 °C indicates that the Li₇La_2.75Y_0.25Zr₂O₁₂ is relatively stable against 1 M LiCl and dist. H₂O. Further electrochemical investigation is essential for practical application of Li₇La_2.75Y_0.25Zr₂O₁₂ as protective solid electrolyte membrane in aqueous Li-air battery.     

Effect of annealing temperature on the structural reorganization of Eu<Superscript>3+</Superscript> optical centers in Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-Eu<Subscript>2</Subscript>O<Subscript>3</Subscript>-BiOF gel films

The dependence of the structural reorganization of Eu³⁺ optical centers in Al₂O₃-Eu₂O₃-BiOF films on the annealing temperature has been investigated. It is shown by the methods of crystal field theory and computer simulation that the increase in the annealing temperature from 700 to 1100 °C leads to removal of bismuth from Eu-O-Bi complex centers with the C _3V symmetry in the Al₂O₃ structure and the change in symmetry from D ₃ to O _h for a large fraction of EuAlO₃ centers.     

The multiple effects of Al-doping on the structure and electrochemical performance of LiNi<Subscript>0.5</Subscript>Mn<Subscript>0.5</Subscript>O<Subscript>2</Subscript> as cathode material at high voltage

The application of LiNi_0.5Mn_0.5O₂ as a high-voltage cathode material for lithium-ion batteries is limited by its poor cycle performance. Therefore, we attempt to improve the cyclability of this material at high voltage by using a doping method and propose a detailed mechanism for the effect of the doping amount on the structure and electrochemical performance. In this work, LiNi_0.5-zAl_zMn_0.5O₂ (z?=?0.00, 0.03, 0.05, 0.08) electrodes were prepared via a simple co-precipitation followed by a solid-state method. X-ray diffraction and Rietveld refinement revealed that a suitable amount of Al doping into LiNi_0.5Mn_0.5O₂ can stabilize the structure and lower the Li/Ni cation mixing, but an excessive doping would lead to Al-ion doping in the lithium layer, which can block lithium diffusion and affect the rate property. Specifically, LiNi_0.47Al_0.03Mn_0.5O₂ shows a much higher capacity retention compared to LiNi_0.5Mn_0.5O₂ both at 25 °C (78.5 vs. 68.8% at 0.2 C) and 60 °C (70.8 vs. 69.0% at 0.2 C). Moreover, Al-doping can retard the voltage drop during the discharge-charge state, with the discharge voltage for LiNi_0.5-zAl_zMn_0.5O₂ (z?=?0.00, 0.03, 0.05, 0.08) decreasing slowly with increasing Al content.     

Magnetic phase diagram and correlation between metamagnetism and superconductivity in Ru<Subscript>0.9</Subscript>Sr<Subscript>2</Subscript>YCu<Subscript>2.1</Subscript>O<Subscript>7.9</Subscript>

The magnetic superconductorRu_0.9Sr₂YCu_2.1O_7.9 (Ru-1212Y) has beeninvestigated using neutron diffraction under variable temperature and magnetic field. Withthe complementary information from magnetization measurements, we propose a magnetic phasediagram T-H for the Ru-1212 system. Uniaxialantiferromagnetic (AFM) order of 1.2μ _B /Ruatoms with moments parallel to the c-axis is found below the magnetictransition temperature at  ~140 K in the absence of magnetic field. In addition,ferromagnetism (FM) in the ab-plane develops below  ~120 K, butis suppressed at lower temperature by superconducting correlations. Externally appliedmagnetic fields cause Ru-moments to realign from the c-axis to theab-plane, i.e. along the ?1,1,0? direction, and induce ferromagnetismin the plane with  ~1μ _B at 60 kOe.These observations of the weak ferromagnetism suppressed by superconductivity and thefield-induced metamagnetic transition between AFM and FM demonstrate not only competingorders of superconductivity and magnetism, but also suggest a certain vortex dynamicscontributing to these magnetic transitions.     

Microwave dielectric properties of Ba(Zn<Subscript>1/3</Subscript>Ta<Subscript>2 / 3</Subscript>)O<Subscript>3</Subscript> for application in high power waveguide window

Higher dielectric constant, low dielectric loss and good transmission characteristicshave been the goal for developing the ceramic waveguide window for high power windowapplications. The choice of materials having high k with low dielectric lossand reduced window size is key parameters to achieve maximum microwave transmissionwithout unleashing microwave dissipation. The microwave dielectric properties ofsynthesized Ba(Zn_1/3Ta_{2 /3})O₃ (BZT) ceramics have been studied for high power windowapplications. The structural studies are correlated with microwave dielectric propertiesof BZT. The maximum values of dielectric constant ?_r =30, Q ×f₀ = 102 THz and near zero temperaturecoefficient of resonance frequency were obtained for BZT ceramics sintered at thetemperature of 1550 °Cfor 4 h. The measured results are used to design a tapered transition from air filledwaveguide to narrow (reduced width and height) dielectric filled waveguide using Heckenslinear taper at a specific frequency. The simulation result shows that the lowerreflection loss is obtained for the tapered transition of the narrow BZT window ascompared to the standard waveguide BZT window. The return loss of –34 dB is obtained forS-bandwaveguide window with a bandwidth of 675 MHz. The return loss observed in the narrow BZTwindow is –46 dB with a bandwidth of 570 MHz at a center frequency of 3.63 GHz. Most ofthe disadvantages in conventional windows will be rectified using the design of the tapertransion employing narrow waveguide window in high power applications.     

Chemical and phase compositions of multilayer nanoperiodic <Emphasis Type="Italic">a</Emphasis>-SiO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>/ZrO<Subscript>2</Subscript> structures subjected to high-temperature annealing

The chemical and the phase compositions of multilayer nanoperiodic SiO _x /ZrO₂ structures prepared by vacuum evaporation from separated sources and subjected to high-temperature annealing have been studied by X-ray photoelectron spectroscopy with a layer-by-layer etching. It is found that, under deposition conditions used, the silicon suboxide layers had the stoichiometric coefficient x ~1.8 and the zirconium-containing layers were the stoichiometric zirconium dioxide. It was found, using X-ray photoelectron spectroscopy, that annealing of the multilayer structures at 1000°C leads to mutual diffusion of the components and chemical interaction between ZrO₂ and SiO _x with predominant formation of zirconium silicate at heteroboundaries of the structures. The SiO _x layers of the annealed nanostructures contained ~5 at % elemental silicon as a result of the phase separation and the formation of fine silicon nanocrystals.