ARGET ATRP of acrylonitrile with ionic liquid as reaction media and 1,1,4,7,7‐pentamethyldiethylenetriamine as both ligand and reducing agent in the presence of air

[C₁₂mim][BF₄], [C₈mim][BF₄], and [C₄mim][BF₄] were first applied as reaction media for atom transfer radical polymerization using activators regenerated by electron transfer (ARGET ATRP) of acrylonitrile (AN) with 1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) as both ligand and reducing agent in the presence of air. The rate of polymerization in [C₁₂mim][BF₄] was considerably faster than in [C₈mim][BF₄] and [C₄mim][BF₄]. ARGET ATRP of AN in [C₁₂mim][BF₄] were better controlled than in [C₈mim][BF₄] and [C₄mim][BF₄] under the same experimental conditions. With an increase in the content of PMDETA, the polymerization provided an accelerated reaction rate and a broader polymer molecular weight distribution. A slow polymerization rate and a broad polydispersity index were observed using TMEDA instead of PMDETA as both ligand and reducing agent. There was an obvious induction period with CuCl₂ instead of CuBr₂ as catalyst. Well‐defined PAN‐b‐PMMA with higher molecular weight at 104,560 and relatively broader distribution at 1.35 was successfully prepared with PAN as macroinitiator via ARGET ATRP in [C₁₂mim][BF₄] in the presence of air. The resultant fibers were obtained with the fineness at 1.17dtex and the tenacity at 6.03cN · dtex^?1. Copyright © 2010 John Wiley & Sons, Ltd.     

Theoretical study of interactions between 1-alkyl-3-methyimidazolium tetrafluoroborate and dibenzothiophene: DFT,NBO, and AIM analysis

Density functional theory is employed to study the interaction energies between dibenzothiophene (DBT) and 1-alkyl-3-methylimidazolium tetrafluoroborate ([C _n mim]⁺[BF₄]^?). The structures of DBT, 1-ethyl-3-methylimidazolium tetrafluoroborate ([C₂mim]⁺[BF₄]^?), 1-butyl-3-methylimidazolium tetrafluoroborate ([C4mim]+[BF₄]?), 1-hexyl-3-methylimidazolium tetrafluoroborate ([C₆mim]⁺[BF₄]^?), 1-octyl-3-methylimidazolium tetrafluoroborate ([C₈mim]⁺[BF₄]^?), [C₂mim]⁺[BF₄]^?–DBT, [C₄mim]⁺[BF₄]^?–DBT, [C₆mim]⁺[BF₄]^?–DBT and [C₈mim]⁺[BF₄]^?–DBT systems are optimized systematically at the B3LYP/6-31G(d,p) level, and the most stable geometries are obtained by NBO and AIM analyses. The results indicate that DBT and imidazolium rings of ionic liquids are parallel to each other. It is found that the [BF₄]^? anion prefers to be located close to a C1–H9 proton ring in the vicinity of the imidazolium ring and the most stable gas-phase structure of [C _n mim]⁺[BF₄]^? has four hydrogen bonds between [C _n mim]+ and [BF₄]?. There are hydrogen bonding interactions, π–π and C–H–π interactions between [C₈mim]⁺[BF₄]^? and DBT, which is confirmed by NBO and AIM analyses. The calculated interaction energies for the studied ionic liquids can be used to interpret a better extracting ability of [C₈mim]⁺[BF₄]^? to remove DBT, due to stronger interactions between [C₈mim]⁺[BF₄]^? and DBT, in agreement with the experimental results of dibenzothiophene extraction by [C _n mim]⁺[BF₄]^?.     

Reverse ATRP process of acrylonitrile in the presence of ionic liquids

An ionic liquid, 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([C₄mim] [BF₄]), was first used as the solvent in azobisisobutyronitrile (AIBN)‐initiated reverse atom transfer radical polymerization (RATRP) of acrylonitrile with FeCl₃/succinic acid (SA) as the catalyst system. The polymerization in [C₄mim][BF₄] proceeded in a well‐controlled manner as evidenced by kinetic studies. Compared with the polymerization in bulk, the polymerization in [C₄mim][BF₄] not only showed the best control of molecular weight and its distribution but also provided rather rapid reaction rate with the ratio of [C₄mim][BF₄] at 200:1:2:4. The polymerization apparent activation energies in [C₄mim][BF₄] and bulk were calculated to be 48.2 and 55.7 kJ mol^?1, respectively. Polyacrylonitrile obtained was successfully used as a macroinitiator to proceed the chain extension polymerization in [C₄mim][BF₄] via a conventional ATRP process. [C₄mim][BF₄] and the catalyst system could be easily recycled and reused after simple purification and had no effect on the living nature of polymerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2701–2707, 2008     

Extraction and high performance liquid chromatographic determination of 3-indole butyric acid in pea plants by using imidazolium-based ionic liquids as extractant

In this paper, imidazolium-based ionic liquids [C₄mim][PF₆], [C₆mim][PF₆], [C₈mim][PF₆], [C₆mim][BF₄] and [C₈mim][BF₄] were tested as extracting solvents for removal of 3-indole butyric acid (IBA) from aqueous media with subsequent determination using HPLC. Percent extraction of IBA was strongly affected by pH of aqueous phases and the chemical structures of ionic liquids (ILs). Extraction of IBA was quantitative in the pH values lower than pK_a of IBA. Considering both extraction and stripping efficiencies of IBA, [C₄mim][PF₆] was found to act more efficient than other studied ILs. Capacity of [C₄mim][PF₆] was 17.6 × 10⁻⁴ mmol IBA per 1.0 mL of IL. Ionic strength of aqueous phase and temperature had shown no serious effects on extraction efficiency of IBA. A preconcentration factor of 100 and a relative standard deviation of 1.16% were obtained. It was found that ionic liquid phase was reusable almost five times for extraction/stripping purposes. 3-Indole acetic acid showed interferential effect in the extraction step. In order to assess the applicability of the method, extraction and stripping of IBA from pea plants and some other samples were studied.     

Tunning CO2 Separation Performance of Ionic Liquids through Asymmetric Anions

This work aims to explore the gas permeation performance of two newly-designed ionic liquids, [C₂mim][CF₃BF₃] and [C₂mim][CF₃SO₂C(CN)₂], in supported ionic liquid membranes (SILM) configuration, as another effort to provide an overall insight on the gas permeation performance of functionalized-ionic liquids with the [C₂mim]⁺ cation. [C₂mim][CF₃BF₃] and [C₂mim][CF₃SO₂C(CN)₂] single gas separation performance towards CO₂, N₂, and CH₄ at T = 293 K and T = 308 K were measured using the time-lag method. Assessing the CO₂ permeation results, [C₂mim][CF₃BF₃] showed an undermined value of 710 Barrer at 293.15 K and 1 bar of feed pressure when compared to [C₂mim][BF₄], whereas for the [C₂mim][CF₃SO₂C(CN)₂] IL an unexpected CO₂ permeability of 1095 Barrer was attained at the same experimental conditions, overcoming the results for the remaining ILs used for comparison. The prepared membranes exhibited diverse permselectivities, varying from 16.9 to 22.2 for CO₂/CH₄ and 37.0 to 44.4 for CO₂/N₂ gas pairs. The thermophysical properties of the [C₂mim][CF₃BF₃] and [C₂mim][CF₃SO₂C(CN)₂] ILs were also determined in the range of T = 293.15 K up to T = 353.15 K at atmospheric pressure and compared with those for other ILs with the same cation and anion’s with similar chemical moieties.     

离子液体型表面活性剂研究

以1-甲基咪唑为原料, 制备了6个常规离子液体: 1-正丁基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[bmim][BF₄]及[bmim][PF₆])、1-正己基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[hmim][BF₄]及[hmim][PF₆])、1-正十六烷基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[C₁₆mim][BF₄]及[C₁₆mim][PF₆])和4个功能化离子液体: 1-(2-羟乙基)-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[2-hemim][BF₄]及[2-hemim][PF₆])、1-乙氧羰基甲基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[eocmmim][BF₄]及[eocmmim][PF₆]). 研究了这两类离子液体的一些物理性能, 旨在挖掘离子液体在香料香精化妆品工业中的应用价值. 分别检测了它们与一般溶剂的互溶性, 并测定了它们的表面张力和发泡性能, 实验结果表明, 仅[C₁₆mim][BF₄]和[C₁₆mim][PF₆]具有发泡性能, 发泡力分别为68和120 mm.     

Relative hydrophobicity of equilibrium phases in biphasic systems (ionic liquid + water)

Partition coefficients for a series of dinitrophenylated (DNP) amino acids in biphasic systems composed of hydrophobic ionic liquids and water were experimentally determined. The ionic liquids used were three 1-alkyl-3-methylimidazolium tetrafluoroborates, [C_nmim][BF₄], with alkyl chain substituents hexyl, octyl, and decyl. The liquid–liquid phase diagram for the system ([C₁₀mim][BF₄] + water) was experimentally determined. DNP amino acids distribute preferentially to the IL-rich phase and ([C₁₀mim][BF₄] + water) was found to be the system with the lowest partition coefficients for the solutes studied. The experimental partition coefficients decrease as the size of the alkyl side chain in the ionic liquids increases. The free energy of transfer of a methylene group between phases was calculated through the partition coefficients, which provides a measure of the relative hydrophobicity of the equilibrium phases. It was found that the system ([C₁₀mim][BF₄] + water) presents a lower free energy (and thus a lower relative hydrophobicity) than the system ([C₈mim][BF₄] + water). In order to better understand this result, the micellar behavior of the three ionic liquids was studied. Electrical conductivities of several aqueous solutions of the ionic liquids were measured to determine the critical micelle concentration (CMC) and the degree of micelle ionization, α, of the three ionic liquids. From these two properties it was possible to obtain the free energy of micellization, ΔG_mic, for the ionic liquids.     

Ionic Liquid Ordering at an Oxide Surface

The interaction of the ionic liquid [C₄C₁Im][BF₄] with anatase TiO₂, a model photoanode material, has been studied using a combination of synchrotron radiation photoelectron spectroscopy and near‐edge X‐ray absorption fine structure spectroscopy. The system is of interest as a model for fundamental electrolyte–electrode and dye‐sensitized solar cells. The initial interaction involves degradation of the [BF₄]^? anion, resulting in incorporation of F into O vacancies in the anatase surface. At low coverages, [C₄C₁Im][BF₄] is found to order at the anatase(101) surface via electrostatic attraction, with the imidazolium ring oriented 32±4° from the anatase TiO₂ surface. As the coverage of ionic liquid increases, the influence of the oxide surface on the topmost layers is reduced and the ordering is lost.     

LLE for (water + ionic liquid) binary systems using [Cxmim][BF4] (x = 6, 8) ionic liquids

Liquid–liquid equilibrium diagrams were determined for (IL + water) systems using the family of ILs 1-alkyl-3-methylimidazolium tetrafluoroborates, where the alkyl groups are hexyl and octyl ([C_xmim][BF₄] with x = 6 and 8). The gravimetric method was used to determine the equilibrium compositions at temperatures ranging from 278.15 to 340.15 K. Both systems present an upper critical solution temperature (UCST), which increases from [C₆mim][BF₄] to [C₈mim][BF₄]. The experimental data were correlated using the NRTL and eNRTL models. The binary interaction parameters were calculated for each system and model, and good agreement between experimental and calculated equilibrium compositions was obtained. Finally, the apparent Gibbs energy, enthalpy and entropy of water solution in the ILs were calculated using a modified van’t Hoff equation. The three thermodynamic functions were found to be positive for both ILs.     

Ionic Association of the Ionic Liquids [C4mim][BF4], [C4mim][PF6], and [Cnmim]Br in Molecular Solvents

Considering the ionic nature of ionic liquids (ILs), ionic association is expected to be essential in solutions of ILs and to have an important influence on their applications. Although numerous studies have been reported for the ionic association behavior of ILs in solution, quantitative results are quite scarce. Herein, the conductivities of the ILs [C_nmim]Br (n=4, 6, 8, 10, 12), [C₄mim][BF₄], and [C₄mim][PF₆] in various molecular solvents (water, methanol, 1‐propanol, 1‐pentanol, acetonitrile, and acetone) are determined at 298.15 K as a function of IL concentration. The conductance data are analyzed by the Lee–Wheaton conductivity equation in terms of the ionic association constant (K_A) and the limiting molar conductance (Λ_m⁰). Combined with the values for the Br^? anion reported in the literature, the limiting molar conductivities and the transference numbers of the cations and [BF₄]^? and [PF₆]^? anions are calculated in the molecular solvents. It is shown that the alkyl chain length of the cations and type of anion affect the ionic association constants and limiting molar conductivities of the ILs. For a given anion (Br^?), the Λ_m⁰ values decrease with increasing alkyl chain length of the cations in all the molecular solvents, whereas the K_A values of the ILs decrease in organic solvents but increase in water as the alkyl chain length of the cations increases. For the [C₄mim]⁺ cation, the limiting molar conductivities of the ILs decrease in the order Br^?>[BF₄]^?>[PF₆]^?, and their ionic association constants follow the order [BF₄]^?>[PF₆]^?>Br^? in water, acetone, and acetonitrile. Furthermore, and similar to the classical electrolytes, a linear relationship is observed between ln K_A of the ILs and the reciprocal of the dielectric constants of the molecular solvents. The ILs are solvated to a different extent by the molecular solvents, and ionic association is affected significantly by ionic solvation. This information is expected to be useful for the modulation of the IL conductance by the alkyl chain length of the cations, type of anion, and physical properties of the molecular solvents.     

离子液体[C2mim][GaCl4]的溶解热研究

在干燥氩气氛下, 用等摩尔的高纯无水GaCl3和[C2mim][Cl](氯化1-甲基-3-乙基咪唑)直接搅拌混合, 制备了淡黄色透明的的离子液体[C2mim][GaCl4] (1-ethyl-3-methylimidazolium chlorogallate) . 在298.15 K下, 利用具有恒温环境的溶解反应热量计, 测定了这种离子液体的不同浓度摩尔溶解焓 . 针对[C2mim][GaCl4]溶解于水后即分解的特点, 在Pitzer电解质溶液理论基础上, 提出了确定这种离子液体标准摩尔溶解焓的新方法, 得到了[C2mim][GaCl4]在水中的标准摩尔溶解焓, ＝－132 kJ•mol－1, 以及Pitzer焓参数组合: ＝－0.1373076和 ＝0.3484209. 借助热力学循环和Glasser离子液体晶格能理论, 用Ga3＋, Cl－和[C2mim]—的离子水化焓数据以及本文得到的[C2mim][GaCl4]标准摩尔溶解焓, 估算了配离子4Cl－(g)解离成Ga3＋(g)和4Cl－(g)的解离焓ΔHdis([GaCl4]-)≈5855 kJ•mol－1. 这个结果揭示了离子液体[C2mim][GaCl4]的标准摩尔溶解焓绝对值并不很大的原因, 即是很大的离子水化焓被很大的[GaCl4]－(g)的解离焓相互抵消了.     

Temperature dependence of the microstructure of 1-butyl-3-methylimidazolium tetrafluoroborate in aqueous solution

Many applications of ionic liquids (ILs) are closely related with their microstructure in mixtures. For example, morphology and pore size of the MCM-41 prepared in aqueous ILs are greatly dependent on the aggregation behavior of the ILs in water. Therefore, the study on the microstructure of ILs in aqueous solutions is of great importance. In this work, ¹H NMR, dynamic light scattering and attenuated total reflection infrared spectroscopy have been used to investigate the temperature effect on the structures of aqueous 1-butyl-3-methylimidazolium tetrafluoroborate ([C₄mim][BF₄]) solutions. It was shown that the size of the IL aggregates becomes larger with decreasing temperature. When the system temperature is below the upper critical solution temperature (UCST) of the binary mixture at about 4 °C, the aggregate size of the IL is larger than 1000 nm. Additionally, the two-dimensional IR results reveal that at low IL concentrations, H₂O can interact with [BF₄]⁻ prior to the CH groups of the imidazolium ring, whereas cation and anion of the IL tend to form aggregate at high IL concentrations. With the decrease of temperature, the interactions between cation and anion of the IL become stronger, but those between the IL and water become weaker, thereby resulting in the growth of the aggregate of cation with anion of the IL. This result may give a reasonable explanation for the origin of the UCST behavior of aqueous [C₄mim][BF₄] solution.     

Solubilities of imidazolium-based ionic liquids in aqueous salt solutions at 298.15 K

The solubilities of ionic liquids in the ternary systems (ionic liquid + H₂O + inorganic salt) were reported at 298.15 K and atmospheric pressure. The examined ionic liquids are [C₄mim][PF₆] (1-n-butyl-3-methylimidazolium hexafluorophosphate), [C₈mim][PF₆] (1-n-octyl-3-methylimidazolium hexafluorophosphate), and [C₈mim][BF₄] (1-n-octyl-3-methylimidazolium tetrafluoroborate). The examined inorganic salts are the chloride-based salts (sodium chloride, lithium chloride, potassium chloride, and magnesium chloride) and the sodium-based salts (sodium thiocyanate, sodium nitrate, sodium trifluoroacetate, sodium bromide, sodium iodide, sodium perchlorate, sodium acetate, sodium hydroxide, sodium dihydrogen phosphate, sodium phosphate, sodium tetrafluoroborate, sodium sulfate, and sodium carbonate). The effects of the cations and the anions of the ionic liquids and of the inorganic salts on the solubility of the ionic liquids in the ternary solutions were systematically compared and discussed.     

Separation of no-carrier-added 109Cd from natural silver target using RTIL 1-butyl-3-methylimidazolium hexafluorophosphate

The room temperature ionic liquid (RTIL), 1-butyl-3-methylimidazolium hexafluorophosphate [C₄mim][PF₆] has various applications in the separation of a range of metal ions replacing volatile and toxic traditional organic solvents in liquid–liquid extraction systems. In this study, the RTIL [C₄mim][PF₆] was used to separate no-carrier-added (NCA) ¹⁰⁹Cd from α-particle irradiated Ag target. A natural Ag foil was bombarded by 30 MeV α-particles to produce ¹⁰⁹Cd. After the decay of all co-produced short-lived products, NCA ¹⁰⁹Cd was separated from the bulk Ag using [C₄mim][PF₆] as extractant from HNO₃ medium. Ammoniumpyrrolidine dithiocarbamate (APDC) was used as a complexing agent. At the optimum condition, 3 M HNO₃, 0.01 M APDC in presence of [C₄mim][PF₆], ~99 % bulk Ag was extracted to the IL phase, leaving NCA ¹⁰⁹Cd in the aqueous phase. The amount of Ag became negligibly small after re-extraction in the same condition. The ionic liquid was recovered by washing it with 1 M HCl.     

Ionic Fluids Containing Both Strongly and Weakly Interacting Ions of the Same Charge Have Unique Ionic and Chemical Environments as a Function of Ion Concentration

Liquid multi‐ion systems made by combining two or more salts can exhibit charge ordering and interactions not found in the parent salts, leading to new sets of properties. This is investigated herein by examining a liquid comprised of a single cation, 1‐ethyl‐3‐methylimidazolium ([C₂mim]⁺), and two anions with different properties, acetate ([OAc]^?) and bis(trifluoromethylsulfonyl)imide ([NTf₂]^?). NMR and IR spectroscopy indicate that the electrostatic interactions are quite different from those in either [C₂mim][OAc] or [C₂mim][NTf₂]. This is attributed to the ability of [OAc]^? to form complexes with the [C₂mim]⁺ ions at greater than 1:1 stoichiometries by drawing [C₂mim]⁺ ions away from the less basic [NTf₂]^? ions. Solubility studies with molecular solvents (ethyl acetate, water) and pharmaceuticals (ibuprofen, diphenhydramine) show nonlinear trends as a function of ion content, which suggests that solubility can be tuned through changes in the ionic compositions.     

Ionic Liquid-Induced Structural and Activity Changes in Hen Egg White Lysozyme

Lysozyme crystals in the presence of 1-butyl-3-methylimidazolium tetrafluoroborate ([C₄mim]BF₄), 1-butyl-3-methylimidazolium chloride ([C₄mim]Cl), 1-butyl-3-methylimidazolium bromide([C₄mim]Br), and 1,3-dimethylimidazolium iodine([dmim]I) were prepared, and the influence of ionic liquids (ILs) on the structure and activity change of lysozyme was investigated. Fourier transform infrared spectroscopy revealed the major secondary structures of α-helix and β-sheet for lysozyme. It was interesting to note that increases of the band near 2,935 and 1,656 cm^?1 from Raman spectroscopy are attributed to the unfolding of lysozyme molecules. A shift in amide III from 1,230 to 1,270 cm^?1 in adding [dmim]I occurs, indicating a transformation from β-sheet to random coil. With regard to adding [C₄mim]BF₄, [C₄mim]Cl, and [C₄mim]Br, α-helix and β-sheet are the predominant structures for lysozyme. The activity study showed that the ILs used brought a positive effect. Especially, [dmim]I leads to a drastic increase in relative activity, and its value reaches 50 %.     

Polarity Behaviour and Specific Interactions of Imidazolium‐Based Ionic Liquids in Ethylene Glycol

The molecular interactions of the ionic liquids (ILs) 1‐butyl‐3‐methylimidazolium tetrafluoroborate [C₄mim][BF₄], 3‐methyl‐1‐octylimidazolium tetrafluoroborate [C₈mim][BF₄] and 1‐butyl‐3‐methylimidazolium octylsulfate [C₄mim][C₈OSO₃] are investigated in ethylene glycol (EG) over the whole mole fraction range using fluorescence (steady‐state and time‐resolved), Fourier transform infrared and nuclear magnetic resonance (NMR) spectroscopy. The cybotactic region surrounding the pyrene fluorescent probe exhibits peculiar characteristics for different ILs in the EG‐rich region. The extent of solute–solvent interactions is assessed by determining the deviations of experimentally observed vibronic band intensity ratios of peak 1 to peak 3 of pyrene fluorescence (I₁/I₃) from a composite I₁/I₃ value obtained using a preferential solvation model. A distinct vibrational frequency shift for various stretching modes of EG (O? H) or ILs (C? H of ring protons, B? F and S?O of anions) indicates specific interactional preferences of EG toward the IL protons/anion. Splitting of the O? H vibration band of EG at 3000–3700 cm^?1 into three separate bands, and analysis of the changes in location and area of these bands as a function of concentration enable precise determination of the effect of ILs on hydrogen bridges of EG. NMR chemical shifts and their deviations from ideality show multiple hydrogen‐bonding interactions of varying strengths between unlike molecules in the mixtures. A comparison of spectroscopic results with thermodynamic properties shows that the mixing microscopic behaviour of the investigated systems is completely different from the macroscopic behaviour, which is primarily governed by the difference in shape, size and nature of the molecules.     

Abrasive Stripping Voltammetric Studies of Lignin and Lignin Model Compounds

Lignin is potentially a major renewable, nonfossil source of aromatic and cyclohexyl compounds. In this study, we have investigated the abrasive stripping voltammetry of lignin and four lignin model compounds in the room temperature ionic liquids (RTILs) [C₄mim][NTf₂], [N_6,2,2,2][NTf₂] and [C₄mim][OTf] (where [C₄mim]⁺=1‐butyl‐3‐methylimidazolium, [N_6,2,2,2]⁺=n‐hexyltriethylammonium, [NTf₂]^?=bis(trifluoromethanesulfonyl)imide and [OTf]^? =trifluoromethanesulfonate) on a gold macrodisk and in 0.1 M H₂SO₄ and 0.1 M NaOH on a boron‐doped diamond (BDD) macroelectrode, with the hope of using the voltammetry to fingerprint the functional groups within the lignin molecule. The use of RTILs on metal electrodes, or either acidic or basic media in combination with BDD electrodes allows solvent systems with wide electrochemical potential windows, useful for studying voltammetry which may be difficult to observe in systems where early breakdown of the solvent occurs.     

Anomalous Freezing of Nano‐Confined Water in Room‐Temperature Ionic Liquid 1‐Butyl‐3‐Methylimidazolium Nitrate

Non‐crystal formation of ice is investigated by simultaneous X‐ray diffraction and differential scanning calorimetry measurements upon cooling to ?100 °C. At room temperature, size‐tunable water confinement (≈20 Å size) in a room‐temperature ionic liquid (RTIL, 1‐butyl‐3‐methylimidazolium nitrate, [C₄mim][NO₃]) exists in a water‐rich region (70–90 mol % D₂O). The confined water (water pocket) is characterized by almost monodispersive size distribution. In [C₄mim][NO₃]‐x mol % D₂O (70<x<94), the absence of sharp Bragg reflections and a distinct exothermal peak indicate that crystallization/cold crystallization both of [C₄mim][NO₃] and D₂O is suppressed, even upon slow cooling and heating.     

PVT properties of imidazolium-, phosphonium-, pyridinium- and pyrrolidinium-based ionic liquids using critical point constants

Song and Mason equation of state (EOS) with a simple modification has been extended to modelling PVT properties of ionic liquids (ILs). The considered ILs are [C₁mim][MeSO4], [C₁mim][CH₃OC₂H₅SO₄], [C₁mim][(CH₃)₂PO₄], [C₂mim][MeSO4], [C₂mim][BF₄], [C₂mim][SCN], [C₂eim][NTf₂], [C₄mim][C(CN)₃], [C₄mim][CF₃SO₃], [C₄mim][SCN], [C₅mim][NTf₂], [C₈mim][NTf₂], [(C₆H₁₃)₃P(C₁₄H₂₉)][Cl], [(C₆H₁₃)₃P(C₁₄H₂₉)][NTf₂], [(C₆H₁₃)₃P(C₁₄H₂₉)][Ac], [C₃mpyr][NTf₂], [C₄mpyr][NTf₂] and [Py][C₂H₅OC₂H₄SO₄]. Three temperature-dependent parameters in the proposed EOS have been scaled as functions of reduced temperature with the use of the law of corresponding states. It is shown that the knowledge of just critical temperature and critical density is sufficient to predict the PVT properties of these ILs. The overall average absolute deviation of calculated densities from literature values for 1347 data points of 18 ILs was found to be 0.58%. The predicted density of ILs from proposed EOS has been compared with those obtained by other literature work. Moreover, we indicate that the Zeno line regularity can well be predicted by proposed model for ILs.