Polarization and Color Separator Using Binary Phase Grating with Subwavelength Period

A data projector using three liquid crystal display panels has a complex optical system. The illuminating optics separate the beam from a light source into three primary colors and separate those into opposite polarizations using multi-layer films and prisms. A reflection grating with the period of subwavelength has high diffraction efficiency for p polarized light and high regularly reflectance for s polarized light. The diffraction angle of a grating largely depends on the wavelength, because a diffractive optical element (DOE) has large chromatic dispersion. The grating with the period of subwavelength can separate the unpolarized light into polarization components effectively using its polarization dependency and can separate white light into color components using its chromatic dispersion simultaneously. The grating makes the optical system simpler and smaller than those with conventional devices. In this paper the efficiency of polarization separation for the grating is calculated by a rigorous analytical method. Next, the condition for color separation is calculated by Snell#x0027;s law, and an optical system using a grating that performs polarization and color separation is proposed. Experimental results of the DOE fabricated are well matched with those of this simulation.     

Flat acoustic lens by acoustic grating with curled slits

We design a flat sub-wavelength lens that can focus acoustic wave. We analytically study the transmission through an acoustic grating with curled slits, which can serve as a material with tunable impedance and refractive index for acoustic waves. The effective parameters rely on the geometry of the slits and are independent of frequency. A flat acoustic focusing lens by such acoustic grating with gradient effective refractive index is designed. The focusing effect is clearly observed in simulations and well predicted by the theory. We demonstrate that despite the large impedance mismatch between the acoustic lens and the matrix, the intensity at the focal point is still high due to Fabry–Perot resonance.     

Optical transmission through metal/dielectric multilayer films perforated with periodic subwavelength slits

The transmission of p-polarized plane wave through Ag/SiO₂ multilayer films perforated with periodic subwavelength air slits is investigated by using the finite-difference time-domain (FDTD) method. The results show that the optical transmission property is mediated by the interference among the propagating coupled-SPP modes along the lateral direction inside the SiO₂ layers and the conditions of Fabry-Pérot-like resonance along the longitudinal direction together. When some geometric parameters are suitably initialized, the high transmission peaks can split into more peaks as the functional layer (metal/dielectric/metal sandwich stack) number increases, and the wavelength of the same-order transmission peak exhibits a red shift as the grating period increases.     

Extraordinary Transmission through Metallic Grating with Subwavelength Slits for S-Polarization Illumination

Based on the rigorous coupled-wave analysis algorithm, we have systematically analysed the effect of the geometrical parameters of a dielectric film coated metallic grating with subwavelength slits on extraordinary optical transmission for s-polarization illumination. Results show that the dielectric film which sustains a waveguide electromagnetic mode on the top of the metallic lamellar grating can strongly enhance the transmittance, the positions of the transmission peaks are mainly determined by the period of the metallic grating, the thickness and refractive index of the dielectric film. This structure shows potential applications in excellent polarizers or polarization-isotropic devices at infrared spectral range by appropriately choosing the geometrical parameters.     

Influence of slit width on the electromagnetic transmission of a periodic metallic grating

The light transmittance of a periodic metallic grating with varied slit widths has been investigated. The transmission peaks move to the shorter wavelength direction with an increase in the width of slits while keeping the other parameters unchanged. It was demonstrated that the slit width affects the spectral transmittance of the metal grating significantly. It was also found that the effective refractive index and cavity modes in slits are responsible for this phenomenon. Cavity modes play an important role in extraordinary transmission of the sub-wavelength aperture grating. When a complete resonant mode forms in the slits, a high transmission will appear. A wider slit results in a smaller efficient refractive index and thus affects the cavity mode in the slits. These two elements cause the transmission peaks to move to the shorter wavelength direction with widening of slits. The results obtained here may provide a useful guide to design metallic slit grating devices.     

基于超材料的中波红外宽带偏振转换研究

基于硅纳米块阵列和亚波长金属光栅,硅纳米块长轴与金属光栅夹角为45°,本文设计了一种高效、宽带偏振转换结构.模拟计算表明该结构实现了线偏振光90°旋转,在3.4—4.5μm波段偏振转换率大于60%,在3—5μm光谱范围内的转换对比率大于10~4.由于该结构光学性能优异,制备难度低,可以应用于光传输控制.     

Elektroneninterferenzen an mehreren künstlich hergestellten Feinspalten

A glass plate covered with an evaporated silver film of about 200 å thickness is irradiated by a line-shaped electron-probe in a vacuum of 10^?4 Torr. A hydrocarbon polymerisation film of very low electrical conductivity is formed at places subjected to high electron current density. An electrolytically deposited copper film leaves these places free from copper. When the copper film is stripped a grating with slits free of any material is obtained. 50 Μ long and 0·3 Μ wide slits with a grating constant of 1 Μ are obtained. The maximum number of slits is five. The electron diffraction pattern obtained using these slits in an arrangement analogous to Young's light optical interference experiment in the Fraunhofer plane and Fresnel region shows an effect corresponding to the well-known interference phenomena in light optics.     

Rigorous electromagnetic analysis of resonant sub-wavelength metallic gratings by parametric Fourier modal method

Electromagnetic TM modes of metallic lamellar reflection or transmission gratings are analyzed by means of the parametric fourier modal method. We show that the resonant optical response of such devices is due to the excitation of guided waves inside the slits. Our rigorous methods allows us to define a resonance condition number and to calculate the field everywhere inside the grating layer.     

Guided mode resonance in subwavelength metallodielectric free-standing grating for bandpass filtering

We present the experimental study of a free-standing metallic guided-mode resonant structure, for bandpass filtering applications in the mid-IR wavelength range. Structure consists of a subwavelength gold grating with narrow slits deposited on a silicon nitride membrane. High optical transmission is measured with up to 78% transmission at resonance. Angularly resolved spectra are presented revealing Fano-type resonance.     

Simple system for evaluating retardation of liquid crystal cells using grating type liquid crystal polarization splitters

We propose a unique optical system for measuring the retardation of birefringent films using a pair of liquid crystal (LC) gratings; that is, the examined birefringent films are inserted between two LC gratings. Because the LC grating functions as a polarization beam splitter for circularly polarized light, the proposed system is optically equivalent to the measurement system using a pair of two circular polarizers. First, the polarization splitting performance of the LC grating is discussed. It is found that a sufficiently high voltage (such that the retardation is less than a half wavelength) has to be applied for the almost pure circularly polarized diffracted light. Next, the measurement of the retardation of a homogeneous LC cell as an examined birefringent film was demonstrated using the proposed method. The proposed method is revealed to have the same measurement performance as that of the conventional method using a pair of linear polarizers and has an advantage that there is no need for the optic axis of the test birefringent specimen to be set at a specific angle.     

Optical resonance in a narrow slit in a thick metallic screen.

Interaction of TM-polarized waves with a subwavelength thick metallic slit has been analyzed. A Fabry-Pérot-like behavior is reported. The resonance peaks, however, have very low magnitude and a systematic shift towards longer wavelengths is observed. The slit being narrow, this shift can be interpreted as the result of an aperture effect. Spectral transmission from a periodic array of such slits features the same peaks with a high increase in their magnitude, confirming that a grating acts as an amplifier of those resonances. Such a mechanism might explain the enhancement of the transmission observed in recent experiments [T. W. Ebbesen, H. J. Lezec, H. F. Ghaemi, T. Thio, and P. A. Wolff, Nature (London) 391, 667 (1998)].     

Concept of Photorefractive Connection Module by Photorefractive Four-Wave Mixing with Extraordinary Writing Beams and an Ordinary Reading Beam

We propose a new optical network device photorefractive connection module (PRCM) which operates as optical switch, amplifier and signal distributor controlled by parallel optical signals. Simple optical control bus systems can be realized by cascade connection of PRCMs. PRCM branches off a desired channel from the spatial multiplexed optical bus line by appropriate setting of the control beam pattern. PRCM uses cross polarized four wave mixing (CPFWM) with extraordinary polarized writing beams and an ordinary polarized reading beam to achieve a high connection gain to the next PRCM stage. We analyze the phase matching angle of CPFWM in which the optical paths of two pump beams are slightly different. The phase conjugate reflectivity indicating a branching ratio of optical signal is derived and calculated in consideration of the phase mismatching Δk. The optimum pump ratio and the grating vector orientation for the largest phase conjugate reflectivity and signal amplification factor are discussed for optical design of PRCM. Since the measured signal beam power after passing through the BaTiO₃ crystal is three or four times higher than its incident power, PRCM has a sufficient connection gain for optical bus and interconnection systems.     

Extraordinary optical transmission for TE wave through metallic sub-wavelength grating with slits filled with dielectric

A metallic sub-wavelength grating with slits filled with dielectric was proposed to achieve broadband and enhanced Extraordinary Optical Transmission (EOT) for Transverse Electric (TE) wave. The physical mechanism for the improvements of the transmission spectrum was also revealed. It was found that the Fabry–Perot cavity resonance in the grating slits was the cause of the enhancement of the EOT and the waveguide modes theory was the fundamental mechanism for the broadened bandwidth of the transmission.     

300W线偏振飞秒全光纤啁啾脉冲放大系统北大核心CSCD

报道了高平均功率的线偏振啁啾脉冲放大系统。该系统包括全光纤结构的多级放大器以及透射光栅脉冲压缩器。压缩前,实现了近衍射极限光束输出,平均功率425 W,光光效率81%,消光比约13dB;压缩后,获得了平均功率300 W、脉宽315fs、峰值功率12 MW的激光脉冲,为目前报道的最高平均功率的线偏振光纤啁啾脉冲放大系统。     

介质覆层下金属周期结构变化对TE波异常透射特性的影响

根据金属光栅结构变化对TE波异常透射特性影响的研究需要,建立了相应的模型。应用时域有限差分(FDTD)方法分别计算了单缝结构、多缝结构、不同宽度和不同周期等结构下的透射分布特征。研究发现添加凹槽会对金属表面能量的传递起阻碍作用。透射频域宽度随薄膜宽度增加而增加。随着狭缝宽度的增加,透射率分布曲线包络线趋于平坦,主透射峰短波长侧透射曲线分布基本不变,而主透射峰及其长波长侧的透射曲线分布变宽。这说明宽度的变化影响了表面共振模式,从而影响透射的分布。单个狭缝的透射与多周期结构相比,透射率曲线几乎重合,表明狭缝对表面模式没有调制作用,各狭缝的透射相对独立。     

Polarization properties of porous gold and silver films

Using the method of polarization modulation of electromagnetic radiation and the Kretschmann geometry, we perform comparative studies of surface plasmon resonance in porous and continuous gold and silver films. The spectral dependences of the polarization difference of the reflection coefficients of nano-composites are obtained for the first time and are supplemented by angular characteristics of this parameter. We show that these dependences characterize particular features of the optical properties related to the structure, morphology, and topology of porous films. We reveal that surface plasmon-polaritons and local plasmons in porous films can be excited both by radiation that is p polarized with respect to the plane of incidence, as is the case with continuous films, and by s polarized radiation. We demonstrate that the measurement results can yield information on the structural properties of films, such as their thickness, roughness height, degree of dispersion of nanoparticles, and so on.     

Negative role of surface plasmons in the transmission of metallic gratings with very narrow slits

It is generally admitted that the extraordinary transmission of metallic grating with very narrow slits is mainly due to the excitation of surface plasmons on the upper and lower interfaces of the grating. We show that the surface plasmon contribution is not the prime effect and that waveguide mode resonance and diffraction are responsible for the extraordinary transmission. Additionally and surprisingly, we reveal that the transmittance of subwavelength metallic gratings is always nearly zero for frequencies corresponding to surface plasmon excitation. This finding implies that surface plasmons play a negative role in the transmission.     

亚波长金属偏振分束光栅设计分析

结合有效介质理论和薄膜光学的抗反射设计方法,设计了基于0.65μm工作波长的亚波长金属偏振分束光栅,给出了光栅的优化设计参数,采用严格耦合波理论分析了光栅的偏振分束特性.结果表明,亚波长金属光栅对TE偏振表现为金属膜特性,具有高反射,对TM偏振表现为介质膜特性,具有高透射,在-30°<θ<30°的大入射角范围和0.47μm<λ<0.80μm的宽入射波谱内,该光栅的透射光和反射光均具有高偏振消光比和低插入损耗的特点. 关键词： 亚波长金属偏振分束光栅 有效介质理论 薄膜光学 严格耦合波理论     

基于光纤光栅的磁场测量新方法

提出了一种基于光纤光栅中法拉第效应和测量偏振相关损耗的直接测量磁场的新方法,给出了理论分析和实验结果.当有外加磁场时,光纤光栅中的法拉第效应使两个圆偏振光的传播常量改变,从而导致光纤光栅的偏振相关损耗的变化.仿真结果表明,外加磁场与偏振相关损耗峰值在一定的测量范围内存在线性关系,测量结果对温度变化不敏感.分析了光栅的参量对测量性能的影响.实验中得到该方案测量磁场的灵敏度为7.8e-6B/Gs,利用现有精度为10-6 dB的光矢量分析仪得到最小可测磁场为2 Gs.实验与理论吻合较好.     

Broadband transmission enhancement of acoustic waves through tapered metallic gratings

The phenomenon of the broadband transmission enhancement of acoustic waves is important for its prospective applications in various devices. To achieve broadband transmission enhancement of acoustic waves, we investigate the acoustic transmission in a metallic grating device with linearly tapered slits through eigen-mode matching theory (EMMT) and finite element (FE) simulation. The tapering provides a gradual filling fraction variation from the entrance to the exit of the slits, destroying the Fabry–Perot resonance and thus leading to broadband and wide-angle enhanced transmission in the audible regime. In addition, acoustic waves are strongly localized and enhanced at the slit exits, in contrast with straight slits.