A DFT study of the polar Diels-Alder reaction between 4-aza-6-nitrobenzofuroxan and cyclopentadiene

The polar Diels-Alder reaction between 4-aza-6-nitrobenzofuroxan (ANBF) and cyclopentadiene has been studied using DFT procedures at the B3LYP/6-31G* level. Only one highly asynchronous transition state structure associated to the formation of the [4+2] adduct 13 is found. A further [3,3] sigmatropic shift on the [4+2] cycloadduct 13 allows its conversion into the thermodynamically more stable [2+4] cycloadduct 14. The analysis of the global and local electrophilicities of the reagents correctly explain the behaviour of ANBF as a strong electrophile in polar cycloadditions.     

A quantum chemical study on the reaction of 1-aryl-1,2-dihydrophosphinine oxides with dimethyl acetylenedicarboxylate

A β-oxophosphorane/ylide (2a) and an oxaphosphete (3a), the product and the possible intermediate of an inverse Wittig type reaction of 1-(2,4,6-triisopropylphenyl-)1,2-dihydrophosphinine oxide with dimethyl acetylenedicarboxylate were studied by quantum chemical calculations. The reaction of the title reagents following either a traditional [4 + 2] cycloaddition protocol to afford phosphabicyclo[2.2.2]octadiene 5 or a novel route yielding eventually β-oxophosphorane/ylide 2 was evaluated by energy calculations. The mechanism for the formation of intermediate 3a₂ was refined by HF/6-31G* transition state calculations. Analysis of the HOMO-LUMO orbitals of the reagents justified the reactivity experienced.     

Synthesis of (±)-cartorimine

Heating pyranulose 4 and cinnamate 2 in the presence of 2,6-di-t-butylpyridine in CH₃CN afforded the [5+2] cycloadduct, which was hydrolyzed to give 13% of cartorimine (1).     

Unambiguous detection of 2,4,6-cycloheptatrien-1-ol by NMR spectroscopy and trapping with phenyltriazolinedione

For the first time, the title alcohol 3 was unambiguously detected as a transient intermediate leading to ditropylether (6) in a cation-anion reaction between the tropylium ion (5) and hydroxide ion in an aqueous solution by NMR spectroscopy. It was also found that 6 gives 3 as a transient product in acid-catalyzed disproportionation of 6 into a mixture of tropone (4) and 1,3,5-cycloheptatriene (7) in chloroform containing water. Furthermore the existence of 3 in the latter reaction was confirmed by trapping with 4-phenyl-1,2,4-triazoline-3,5-dione to afford the [4+2]cycloadduct of the norcaradiene form of 3.     

Synthesis of optically active seven-membered 1,5-anhydrocarbasugars and 1,4,5-tribenzoyloxy-2-ethoxy cycloheptanes via [5+2] cycloaddition

[5+2] Cycloaddition followed by asymmetric dihydroxylation procedure have been utilized to prepare novel cyclitols. Accordingly, rac-2α-hydroxy-6α-ethoxy-1,5-anhydro cyclohept-3-ene, 10 derived from [5+2] cycloaddition of 3-oxidopyrylium ylide and vinyl ether has been recognized as a seven-membered carbasugar equivalent and elaborated to 1,4,5-tribenzoyloxy-2-ethoxy cycloheptanes through a flexible, regio- and stereoselective strategy involving Sharpless asymmetric dihydroxylation conditions to resolve the compounds obtained. The structures and relative configurations of newly synthesized (+)-2α-acetoxy-6α-ethoxy-3β,4β-dihydroxy-1,5-anhydro cycloheptane ((+)-12)); (−)-1β,4β,5β-tribenzoyloxy-6α-ethoxy cycloheptane ((−)-17) and (+)-1α,4α,5α-tribenzoyloxy-6β-ethoxy cycloheptane ((+)-17) are unambiguously established by single crystal X-ray analysis and duly supported by ¹H and ¹³C NMR spectroscopy data.     

An elegant approach for stereocontrolled synthesis of furopyran building blocks

An elegant approach for stereocontrolled synthesis of furopyran (hexahydro-2H-furo[3,2-b]pyran) building blocks was reported. The key steps in the sequence involved an efficient intramolecular 3-oxidopyrylium-alkene [5+2] cycloaddition for the synthesis of cycloadduct 6 and Beckmann fragmentation of ketoxime 13 to yield the furopyrans (5a-c).     

Generation of allenylthioketene S,S-dioxides through [3,3] sigmatropic rearrangement of alkynyl propargyl sulfones

Thioketene S,S-dioxides 2 were successfully generated through [3,3] sigmatropic rearrangement of alkynyl propargyl sulfones 1 and the formation of 2 was confirmed by trapping experiment using cyclohexene or allyltrimethylsilane affording a [2+2] cycloadduct 5. In situ generated thioketene S,S-dioxides 2 underwent facile conversion into allenynes 3 in moderate yields, via formation and subsequent [1,2] shift of vinylidene carbenes.     

Synthesis of the 5-hydroxymethyl-6-aryl-8-oxabicyclo[3.2.1]oct-3-en-2-one natural products descurainin and cartorimine

Reaction of pyranulose 6 with styrenes 12c or 13 and Et₃N in CH₂Cl₂ at 25 °C afforded the [5+2] cycloadducts 14c and 15, which were hydrolyzed to give the natural products 1 and descurainin (2) in 24 and 27% overall yield, respectively. Heating pyranulose 6 with cinnamate ester 21 in the presence of 2,6-di-t-butylpyridine in CH₃CN at 175 °C afforded the [5+2] cycloadduct, which was hydrolyzed to give cartorimine (3) in 13% yield.     

Synthesis, characterization and electrochemical properties of two new calix[4]arene derivatives bearing two ferrocene imine or ferrocene amine units at the upper rim

A novel calix[4]arene derivative with two ferrocenyl Schiff-base groups at the upper rim 3 has been synthesized from 5,17-diformyl-25,27-dipropoxy-26,28-dihydroxy calix[4]arene and 4-ferrocenylaniline via condensation reaction. Reduction of 3 with sodium borohydride led to calix[4]arene derivative 4 with two amino ferrocenyl groups at the upper rim. The ferrocenyl Schiff-base calix[4]arene and its corresponding reduced amine have been purified and characterized by elemental analysis,¹H NMR, FTIR, Mass and UV-vis spectral data. Electrochemical properties of compounds 3 and 4 have been investigated. Cyclic voltammograms of 3 and 4 show reversible redox couples of ferrocene/ferrocinium at E_1/2=0.401 V and 0.346 V, respectively. Electrochemical studies show these redox active compounds electrochemically recognize trivalent lanthanides La³⁺ and Ce³⁺ and divalent Pb²⁺ and Cu²⁺cations. With ferrocenyl Schiff-base calix[4]arene 3 an anodic shift as large as 130 mV is observed on addition of one equivalent of Ce³⁺ ion. Also extraction properties of compound 4 towards some metal cations have been described. It has been observed that compound 4 has a good selectivity for metal cations Fe³⁺, Cu²⁺, Pb²⁺ and Cd²⁺ against Ni²⁺ and Co²⁺.     

Expedient synthesis of a highly substituted tropolone via a 3-oxidopyrylium [5+2] cycloaddition reaction

An expedient ten-step synthesis of a substituted tropolone is described. The synthesis involves a 3-oxidopyrylium [5+2] cycloaddition reaction with acrylonitrile as the key step, affording a highly functionalized [3.2.1]-bicycle 10 as a single regioisomer. The nitrile substituent of the reduced cycloadduct 12 permits efficient ether-bridge cleavage and tropolone 15 is obtained after a final bis-oxidation procedure. The pyranulose acetate cycloaddition precursor was derived from 3-methyl-2-furoate.     

Synthesis of thiophene-capped [2]rotaxanes

Two types of thiophene-capped [2]rotaxanes, i.e., bithienyl (2T)- and bis(3,4-ethylenedioxythiophene)-yl (BEDOT)-capped [2]rotaxanes, were synthesized. The electron-deficient cyclophane of cyclobis(paraquat-p-phenylene) (CBPQT⁴⁺) was used as a macrocycle. Association constants for inclusion complexation of 2T- and BEDOT-derivatives with CBPQT⁴⁺ were obtained by ¹H NMR titration. Due to the donor-acceptor charge transfer absorption band, 2T- and BEDOT-capped [2]rotaxanes have red and green colors, respectively. On the basis of electrochemical analysis, we confirmed that only BEDOT-capped [2]rotaxane is a promising candidate for [3]rotaxane synthesis through oxidation coupling of the thiophene unit.     

[3+2] Cycloaddition-mediated synthesis of 3-methylsulfanyl-pyrrolidine-3-carboxylic acid methyl ester

1,3-Dipolar cycloaddition reactions are fundamental processes in organic chemistry. Herein we report [3+2] annulation of thiomethylacrylate 2 and azomethine ylide precursor 3 towards the synthesis of novel 3-methylsulfanyl-pyrrolidine 5. Alternatively, we have also explored the alkylation of 7 with dimethyldisulfide/LDA for the introduction of thiomethyl group towards the synthesis of 5 in moderate to good yields. Efficacy of these two routes under various conditions/catalysts for the synthesis of 5 is presented.     

Phosphite ligands derived from distally and proximally substituted dipropyloxy calix[4]arenes and their palladium complexes: Solution dynamics, solid-state structures and catalysis

Two bisphosphite ligands, 25,27-bis-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (3) and 25,26-bis-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy-p-tert-butyl calix[4]arene (4) and two monophosphite ligands, 25-hydroxy-27-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (5) and 25-hydroxy-26-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy- p-tert-butyl calix[4]arene (6) have been synthesized. Treatment of (allyl) palladium precursors [(η³-1,3-R,R′-C₃H₄)Pd(Cl)]₂ with ligand 3 in the presence of NH₄PF₆ gives a series of cationic allyl palladium complexes (3a-3d). Neutral allyl complexes (3e-3g) are obtained by the treatment of the allyl palladium precursors with ligand 3 in the absence of NH₄PF₆. The cationic allyl complexes [(η³-C₃H₅)Pd(4)]PF₆ (4a) and [(η³-Ph₂C₃H₃)Pd(4)]PF₆ (4b) have been synthesized from the proximally (1,2-) substituted bisphosphite ligand 4. Treatment of ligand 4 with [Pd(COD)Cl₂] gives the palladium dichloride complex, [PdCl₂(4)] (4c). The solid-state structures of [{(η³-1-CH₃-C₃H₄)Pd(Cl)}₂(3)] (3f) and [PdCl₂(4)] (4c) have been determined by X-ray crystallography; the calixarene framework in 3f adopts the pinched cone conformation whereas in 4c, the conformation is in between that of cone and pinched cone. Solution dynamics of 3f has been studied in detail with the help of two-dimensional NMR spectroscopy.The solid-state structures of the monophosphite ligands 5 and 6 have also been determined; the calix[4]arene framework in both molecules adopts the cone conformation. Reaction of the monophosphite ligands (5, 6) with (allyl) palladium precursors, in the absence of NH₄PF₆, yield a series of neutral allyl palladium complexes (5a-5c; 6a-6d). Allyl palladium complexes of proximally substituted ligand 6 showed two diastereomers in solution owing to the inherently chiral calix[4]arene framework. Ligands 3, 6 and the allyl palladium complex 3f have been tested for catalytic activity in allylic alkylation reactions.     

Mono and dinuclear half-sandwich platinum group metal complexes bearing pyrazolyl-pyrimidine ligands: Syntheses and structural studies

Reactions of 0.5 eq. of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ (arene = η⁶-C₆H₆, η⁶-p-ⁱPrC₆H₄Me) and [(Cp∗)M(μ-Cl)Cl]₂ (M = Rh, Ir; Cp∗ = η⁵-C₅Me₅) with 4,6-disubstituted pyrazolyl-pyrimidine ligands (L) viz. 4,6-bis(pyrazolyl)pyrimidine (L1), 4,6-bis(3-methyl-pyrazolyl)pyrimidine (L2), 4,6-bis(3,5-dimethyl-pyrazolyl)pyrimidine (L3) lead to the formation of the cationic mononuclear complexes [(η⁶-C₆H₆)Ru(L)Cl]⁺ (L = L1, 1; L2, 2; L3, 3), [(η⁶-p-ⁱPrC₆H₄Me)Ru(L)Cl]⁺ (L = L1, 4; L2, 5; L3, 6), [(Cp∗)Rh(L)Cl]⁺ (L = L1, 7; L2, 8; L3, 9) and [(Cp∗)Ir(L)Cl]⁺ (L = L1, 10; L2, 11; L3, 12), while reactions with 1.0 eq. of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ and [(Cp∗)M(μ-Cl)Cl]₂ give rise to the dicationic dinuclear complexes [{(η⁶-C₆H₆)RuCl}₂(L)]²⁺ (L = L1, 13; L2, 14; L3, 15), [{(η⁶-p-ⁱPrC₆H₄Me)RuCl}₂(L)]²⁺ (L = L1, 16; L2, 17; L3, 18), [{(Cp∗)RhCl}₂(L)]²⁺ (L = L1, 19; L2, 20; L3, 21) and [{(Cp∗)IrCl}₂(L)]²⁺ (L = L1 22; L2, 23; L3 24). The molecular structures of [3]PF₆, [6]PF₆, [7]PF₆ and [18](PF₆)₂ have been established by single crystal X-ray structure analysis.     

8-Azabicyclo[3.2.1]oct-3-en-2-ones via asymmetric 1,3-dipolar cycloaddition of a homochiral 3-oxidopyridinium betaine

8-Azabicyclo[3.2.1]oct-3-en-2-ones were prepared by asymmetric 1,3-dipolar cycloadditions of homochiral pyridinium betaine 4. Excellent diastereofacial selectivity was achieved for the major 6-exo cycloadducts. The absolute stereochemistry of cycloadduct 7 was confirmed by a single-crystal X-ray diffraction study.     

Regio- and stereoselective reactions of a rhodanine derivative with optically active 2-methyl- and 2-phenyloxirane

The reaction of a rhodanine derivative (=(Z)-5-benzylidene-3-phenyl-2-thioxo-1,3-thiazolidin-4-one; 1) with (S)-2-methyloxirane (2) in the presence of SiO₂ in dry CH₂Cl₂ for 10 days led to two diastereoisomeric spirocyclic 1,3-oxathiolanes 3 and 4 with the Me group at C(2) (Scheme 2). The analogous reaction of 1 with (R)-2-phenyloxirane (5) afforded also two diastereoisomeric spirocyclic 1,3-oxathiolanes 6 and 7 bearing the Ph group at C(3) (Scheme 3). The structures of 3, 4, 6, and 7 were confirmed by X-ray crystallography (Figs. 1 and 2). These results show that oxiranes react selectively with the thiocarbonyl group (CS) in 1. Furthermore, the nucleophilic attack of the thiocarbonyl S-atom at the SiO₂-activated oxirane ring proceeds with high regio- and stereoselectivity via an S_N2-type mechanism.     

Synthesis of new calix[4]pyrrole derivatives via 1,3-dipolar cycloadditions

Octamethylcalix[4]pyrrole-2-carbaldehyde 1 and 3-(octamethylcalix[4]pyrrol-2-yl)propenal 5 were used as precursors of azomethine ylides, which were trapped in situ with a range of dipolarophiles, such as 1,4-benzoquinone, 1,4-naphthoquinone, and fumaronitrile. Aldehyde 1 showed very low reactivity but the azomethine ylide generated from the reaction of aldehyde 5 with N-methylglycine could be trapped with those dipolarophiles to afford new β-substituted octamethylcalix[4]pyrrole derivatives in moderate yields. The resulting cycloadducts show high affinity constants for fluoride and acetate anions; compounds 7 and 8 display sharp changes in color in the presence of these anions.     

Synthesis and characterization of novel triazenes from the reaction of the cyclic aminal 1,3,6,8-tetraazatricyclo[4.3.1.1]undecane (TATU) with diazonium ions

The reaction of the cyclic aminal 1,3,6,8-tetraazatricyclo[4.3.1.1^3,8]undecane (TATU, 4) with diazonium salts resulted in the formation of a new series of bis-triazenes, namely 3,8-bis[(4-methoxyphenyl)diazenyl]-1,3,6,8-tetraazabicyclo[4.3.1]decane 6a, 3,8-bis[(2-methoxyphenyl)diazenyl]-1,3,6,8-tetraazabicyclo[4.3.1]decane 6b, 3,8-bis(p-tolyldiazenyl)-1,3,6,8-tetraazabicyclo[4.3.1]decane 6c. When aniline derived diazonium salt 5d was coupled with TATU, 3,8-bis(phenyldiazenyl)-1,3,6,8-tetraazabicyclo[4.3.1]decane 6d and bis[1,5-bis-((E)-phenyldiazenyl)-1,3,5-triazepan-3-yl]methane 7 were obtained. These compounds were characterized by HR-MS, ¹H and ¹³C NMR and 2D-NMR. Additionally, the structure of compound 7 was confirmed by X-ray crystallography.     

A specific and ratiometric chemosensor for Hg based on triazole coupled ortho-methoxyphenylazocalix[4]arene

Calix[4]arene 3, which contains two distal triazole groups on the lower rim and two distal o-methoxyphenylazo groups on the upper rim, was synthesized and found to be a specific and ratiometric sensor for Hg²⁺ in a polar protic solvent. A series of o-methoxyphenylazo derivatives (3, 4, 5, 7, and 9) were synthesized, which proved that the lower-rim triazoles and the hydroxyl azophenol(s) were the major ligands for metal ion binding. Though analogues 4 and 10 showed some sensitivity for Hg²⁺, compound 3 was the only ratiometric chemosensor for Hg²⁺ among the series of azocalix[4]arenes synthesized in this work. The formation of 3·Hg²⁺ complex was supported by UV/vis and NMR titration studies and Mass spectrometry. Based on the symmetrical features of NMR spectra of 3·Hg²⁺, the complex is believed to be symmetrical with respect to the calix[4]arene cavity. Furthermore, the complex was determined to be 1:1 binding stoichiometry by Job’s plot, and the association constant was determined to be 4.02×10³ M⁻¹ using Benesi-Hildebrand plot.     

Selective metal detection in an unsymmetrical 1,3-alternate calix[4]biscrown chemosensor

Calix[4]crown-based chemosensors 1, 2, and reference 3 have been synthesized. The weak fluorescence intensity of 1,5-naphthalene of 1 suggests that the benzene rings of the calix[4]arene as well as the oxygen atoms of the crown-5 ring take part in PET. The complexation of two K⁺ ions by both crown-5 and 1,5-naphthalene-crown-6 loops of 1 caused fluorescence enhancement of the naphthalene unit by CHEF. Pb²⁺ acted as a quenching metal ion.