Reductive ring opening of dihydrodibenzothiepine and dihydrodinaphtho-oxepine and -thiepine

The 4,4′di-tert-butylbiphenyl (DTBB)-catalysed lithiation of dihydrodibenzothiepine (1) at −78 °C for 30 min followed by reaction with a carbonyl compound [^tBuCHO, Ph(CH₂)₂CHO, PhCHO, (n-C₅H₁₁)₂CO, (CH₂)₅CO, (CH₂)₇CO, (−)-menthone] at the same temperature leads, after hydrolysis with 3 M hydrochloric acid, to sulphanyl alcohols 2. If after addition of a carbonyl compound as the first electrophile [Me₂CO, (CH₂)₅CO, (−)-menthone], the resulting dianion of type II is allowed to react at room temperature for 30 min, a second lithiation takes place to give an intermediate of type III, which by reaction with a second electrophile [Me₂CO, Et₂CO, (CH₂)₅CO, ClCO₂Et], yields, after hydrolysis, difunctionalised byphenyls 4. The cyclisation of the sulphanyl alcohol 2c under acidic conditions yields the eight-membered sulphur containing heterocycle 3. The lithiation of dihydrodinaphthoheteroepines 7 and 10 with 2.2 equiv of lithium naphthalenide in THF at −78 °C followed by reaction with different electrophiles [H₂O, D₂O, ^tBuCHO, Me₂CO, Et₂CO, (CH₂)₄CO, (CH₂)₅CO] at the same temperature leads, after hydrolysis, to unsymmetrically 2,2′-disubstituted binaphthyls 9 and 12, respectively. When the lithiation is performed with an excess of lithium in the presence of a catalytic amount of DTBB (10% molar), a double reductive cleavage takes place to give the dianionic intermediate VII, which by reaction with different electrophiles [H₂O, Me₂CO, Et₂CO, (CH₂)₄CO, (CH₂)₅CO], followed by hydrolysis with water, yields symmetrically 2,2′-disubstituted binaphthyls 8 and 11. In the case of starting from (R)- or (S)-dihydrodinaphthoheteroepines 7 and 10, these methodologies allow us to prepare enantiomerically pure compounds 8, 11 and 12.     

Dibenzothiepins, phthalans and phthalides from 4-heterosubstituted dibenzothiins

The lithiation of 4-heterosubstituted dibenzothiins 1 (phenoxathiin, phenothiazine and thianthrene) with lithium and a catalytic amount of 4,4′-di-tert-butylbiphenyl (DTBB, 7.5% molar) in THF at temperatures ranging from −90 to −78°C gives the corresponding functionalised organolithium intermediate I, which by reaction with different electrophiles [H₂O, D₂O, Bu^tCHO, PhCHO, Ph(CH₂)₂CHO, Me₂CO, Et₂CO, (CH₂)₅CO, (CH₂)₇CO] at the same temperature, followed by hydrolysis, gives the expected functionalised thiols 2. Cyclisation of some thiols 2 under acidic conditions leads to the corresponding seven-membered dibenzo heterocycles 5. In the case of thianthrene 1c, after addition of a carbonyl compound as the first electrophile [MeCHO, Bu^tCHO, Me₂CO, Et₂CO, (CH₂)₅CO], the corresponding intermediate II can be lithiated again and react with a second electrophile. Diols 3 are obtained after hydrolysis when a carbonyl compound [Bu^tCHO, PhCHO, Ph(CH₂)₂CHO, Me₂CO, Et₂CO, (CH₂)₅CO] is used as the second electrophile. Acidic cyclisation of diols 3 gives substituted phthalans 6 in almost quantitative yields. Finally, in the case of using carbon dioxide as the second electrophile, phthalides 4 are obtained after acidic hydrolysis.     

Reductive opening of 2,7-dihydrodinaphthoxepine and thiepine: easy regioselective preparation of 2,2′-difunctionalised binaphthyls

The lithiation of 2,7-dihydrodinaphthoheteroepines (5) with 2.2 equiv of lithium naphthalenide in THF at −78 °C gives dianionic intermediates 8, which by reaction with different electrophiles [H₂O, D₂O, ^tBuCHO, Me₂CO, Et₂CO, (CH₂)₄CO, (CH₂)₅CO] at the same temperature, followed by hydrolysis, leads to unsymmetrically 2,2′-disubstituted binaphthyls 6. When the lithiation is performed with an excess of lithium in the presence of a catalytic amount of 4,4′-di-tert-butylbiphenyl (DTBB, 10 mol %), a double reductive cleavage takes place to give dianionic intermediate 9, which by reaction with different electrophiles [H₂O, Me₂CO, Et₂CO, (CH₂)₄CO, (CH₂)₅CO], followed by hydrolysis with water, yields symmetrically 2,2′-disubstituted binaphthyls 7. In the case of starting from (R)-5a, the reductive opening by treatment with 2.2 equiv of lithium naphthalenide followed by reaction with H₂O or (CH₂)₅CO as electrophiles and final hydrolysis, leads to enantiomerically pure compounds (R)-6aa and (R)-6af, respectively.     

Synthesis and properties of novel 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-triones: methodology for synthesizing cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates

Novel condensation reaction of tropone with N-substituted and N,N′-disubstitued barbituric acids in Ac₂O afforded 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (8a-f) in moderate to good yields. The ¹³C NMR spectral study of 8a-f revealed that the contribution of zwitterionic resonance structures is less important as compared with that of 8,8-dicyanoheptafulvene. The rotational barriers (ΔG^‡) around the exocyclic double bond of mono-substituted derivatives 8a-c were obtained to be 14.51-15.03 kcal mol⁻¹ by the variable temperature ¹H NMR measurements. The electrochemical properties of 8a-f were also studied by CV measurement. Upon treatment with DDQ, 8a-c underwent oxidative cyclization to give two products, 7 and 9-substituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates (11a-c·BF₄⁻ and 12a-c·BF₄⁻) in various ratios, while that of disubstituted derivatives 8d-f afforded 7,9-disubstituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborate (11d-f·BF₄⁻) in good yields. Similarly, preparation of known 5-(1′-oxocycloheptatrien-2′-yl)-pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (14a-d) and novel derivatives 14e,f was carried out. Treatment of 14a-c with aq. HBF₄/Ac₂O afforded two kinds of novel products 11a-c·BF₄⁻ and 12a,c·BF₄⁻ in various ratios, respectively, while that of 14d-f afforded 11d-f. The product ratios of 11a-c·BF₄⁻ and 12a-c·BF₄⁻ observed in two kinds of cyclization reactions were rationalized on the basis of MO calculations of model compounds 20a and 21a. The spectroscopic and electrochemical properties of 11a-f·BF₄⁻ and 12a-c·BF₄⁻ were studied, and structural characterization of 11c·BF₄⁻ based on the X-ray crystal analysis and MO calculation was also performed.     

Di(1H,1H,2H,2H-perfluorooctyl)-dibenzo-18-crown-6: A “light fluorous” recyclable phase transfer catalyst

A series of dibenzo-18-crown-6 lariat ethers containing two C₇H₁₅ (11), (CH₂)₂C₆F₁₃ (14), (CH₂)₂C₈F₁₇ (15), NHC₇H₁₅ (18) and NHCH₂C₆F₁₃ (19) sidearms were prepared and the single crystal X-ray structure of cis-4,4′-di(1H,1H,2H,2H-perfluorodecyl)-dibenzo-18-crown-6 (15a) is reported. The “light fluorous” dibenzo-18-crown-6 ether (14) has emerged as a stable and robust PTC catalyst, which can be recycled efficiently by fluorous solid-phase extraction, and gives better PTC catalytic activity compared to the parent, non-fluorinated PTC catalyst, dibenzo-18-crown-6, and the alkylated derivative (11) in aliphatic and aromatic nucleophilic substitutions.     

Arene-promoted lithiation of 1,n-dihaloalkanes (n=2-6): a comparative study

The reaction of 1,n-dichloroalkanes 3a (n=2-6) with an excess of lithium powder and a catalytic amount of 4,4′-di-tert-butylbiphenyl (DTBB; 2.5 mol %) in the presence of different carbonyl compounds [Bu^tCHO, PhCHO, Et₂CO, (CH₂)₄CO, (CH₂)₅CO, (CH₂)₇CO, (−)-menthone], in THF at −78 °C leads, after hydrolysis with water, to the expected 1,(n+2)-diols 4, yields being <25% for n=2, 3 and in the range of 45-79% for n=4-6. When the same protocol is applied to 1,n-bromochloroalkanes 3b and 1,n-dibromoalkanes 3c (n=2-6), diols 4 are obtained in general with lower yields.     

1,3-Dichloro-2-butene: a useful precursor for the 2-butene-1,3-dianion and its corresponding 1,3-dipolar synthon

The reaction of 1,3-dicloro-2-butene (1; 5:1 Z:E-mixture) with lithium powder and a catalytic amount of 4,4′-di-tert-butylbiphenyl (DTBB, 1% molar) in the presence of different electrophiles [EtCHO, PrⁱCHO, Bu^tCHO, c-C₆H₁₁CHO, Me₂CO, Et₂CO, (CH₂)₄CO, (CH₂)₅CO, (c-C₃H₅)₂CO, Me₃SiCl] in THF at temperatures ranging between −78 and −50°C gives, after hydrolysis with water, the corresponding products 2 in different Z:E-ratios depending on the electrophile used. Treatment of some diols 2 with hydrochloric acid gives dienic alcohols 3 or substituted dihydropyrans 4, depending on the structure of the starting diol. Finally, the same dichlorinated starting material is transformed into the corresponding allylic amines derived from morpholine and benzyl methyl amine and submitted to the same DTBB-catalysed lithiation as above, so after reaction with different electrophiles [Bu^tCHO, c-C₆H₁₁CHO, Me₂CO, Et₂CO, (CH₂)₄CO, (CH₂)₅CO, Me₃SiCl] and final hydrolysis with water, compounds 7 are isolated having a Z-configuration. A mechanistic explanation for this behaviour is given.     

New alkenyl-substituted group 4 C-ansa-metallocene complexes. Reactivity of the substituent at the carbon ansa bridge

The allyl-substituted group 4 metal complexes [M{(R)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] [M = Ti, R = CH₂CHCH₂, (2); R = CH₂C(CH₃)CH₂ (3); M = Zr, R = CH₂CHCH₂ (4), R = CH₂C(CH₃)CH₂ (5)] have been synthesized by the reaction of allyl ansa-magnesocene derivatives and the tetrachloride salts of the corresponding transition metal. The dialkyl complexes ] [M = Ti, R = CH₂=CHCH₂, R′ = Me (6), R′ = CH₂Ph (7); R = CH₂C(CH₃)CH₂, R′ = Me (8), R′ = CH₂Ph (9); M = Zr, R = CH₂CHCH₂, R′ = Me (10), R′ = CH₂Ph (11); R = CH₂C(CH₃)CH₂, R′ = Me (12), R′ = CH₂Ph (13)] have been synthesized by the reaction of the corresponding ansa-metallocene dichloride complexes 2-5 and two molar equivalents of the alkyl Grignard reagent. Compounds 2-5 reacted with H₂ under catalytic conditions (Wilkinson’s catalyst or Pd/C) to give the hydrogenation products [M{(R)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] [M = Ti and R = CH₂CH₂CH₃ (14) or R = CH₂CH(CH₃)₂ (15); M = Zr and R = CH₂CH₂CH₃ (16) or R = CH₂CH(CH₃)₂ (17)]. The reactivity of 2-5 has also been tested in hydroboration and hydrosilylation reactions. The hydroboration reactions of 3, 4 and 5 with 9-borabicyclo[3.3.1]nonane (9-BBN) yielded the complexes [M{(9-BBN)CH₂CH(R)CH₂CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] [M = Ti and R = H (18); M = Zr and R = H (19) or R = CH₃ (20)]. The reaction with the silane reagents HSiMe₂Cl gave the corresponding [M{ClMe₂SiCH₂CHRCH₂CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] [M = Ti and R = H (21); M = Zr and R = H (22) or R = CH₃ (23)]. The reaction of 22 with t-BuMe₂SiOH produced a new complex [Zr{t-BuMe₂SiOSi(Me₂)CH₂CH₂CH₂CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] (24) through the formation of Si-O-Si bonds. On the other hand, reactivity studies of some zirconocene complexes were carried out, with the insertion reaction of phenyl isocyanate (PhNCO) into the zirconium-carbon σ-bond of [Zr{(n-Bu)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}₂Me₂] (25) giving [{(n-Bu)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)]}Zr{Me{κ²-O,N-OC(Me)NPh}] as a mixture of two isomers 26a-b. The reaction of [Zr{(n-Bu)(H)C(η⁵-C₅Me₄)(η⁵-C₅H₄)}(CH₂Ph)₂] (27) with CO also provided a mixture of two isomers [{(n-Bu)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)]}Zr(CH₂Ph){κ²-O,C-COCH₂Ph}] 28a-b. The molecular structures of 4, 11, 16 and 17 have been determined by single-crystal X-ray diffraction studies.     

Synthesis, properties, and oxidizing function of 6-substituted 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrole-8(7H),10(9H)-dionylium tetrafluoroborates

Uracil-annulated heteroazulenes, 6-substituted 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrole-8(7H),10(9H)-dionylium tetrafluoroborates 7a,b·BF₄⁻, which are the isoelectronic compounds of 5-dezazaflavin, were synthesized. X-Ray crystal analysis and MO calculations were carried out to clarify the structural characteristics of 7a,b·BF₄⁻. The stability of cations 7a,b is expressed by the pK_R+ values which were determined spectrophotometrically to be 10.9 and 11.2, respectively. The electrochemical reduction of 7a,b exhibited high reduction potentials at −0.84 and −0.87 (V vs Ag/AgNO₃) upon cyclic voltammetry (CV). A good linear correlation between the pK_R+ values and reduction potentials (E1_red) of 7a,b·BF₄⁻ and reference compounds 4·BF₄⁻ and 5·BF₄⁻ was obtained. In a search of the reactivity, reactions of 7a,b·BF₄⁻ with some nucleophiles, hydride and diethylamine, were carried out to clarify that the introduction of nucleophiles to give regio-isomers is dependent on the nucleophile. The photo-induced oxidation reactions of 7a,b·BF₄⁻ toward some alcohols under aerobic conditions were carried out to give the corresponding carbonyl compounds in more than 100% yield [based on compounds 7a,b·BF₄⁻], suggesting the oxidizing function of 7a,b·BF₄⁻ toward alcohols in the autorecycling process.     

A study of the physico-chemical properties of 1,3,5-trihydroxy-1,3,5-triazin-2,4,6[1H,3H,5H]-trione

Acetyl (Ia) and pivaloyl (Ib) triesters of the 1N,3N,5N-trihydroxy-1,3,5-triazin-2,4,6[1H,3H,5H]-trione (I) were synthesised. The spectrophotometric and potentiometric investigation of I revealed a weak acidic properties of triprotonic acid (pK_a1=5.23, pK_a2=6.32, and pK_a3=7.93). The MS and TGA analyses of I indicated on hydroxyisocyanate as possible degradation product. The chelating ability of I with Fe(III)-ion was preliminary explored. IR measurements of aqueous solutions of I in the presence of Fe(III) ion showed the possible chelating ability of all hydroxamic moieties. The chemical structures and properties of investigated compounds were derived from the results of IR, ¹H and ¹³C NMR, UV and MS spectrometric data, as well as thermogravimetric and potentiometric analysis.     

Selective lithiation of 1,6-dihalohex-1-enes and 1,6-dihalohex-1-ynes

The lithiation of 1-choro- and 1-bromo-6-chlorohex-1-yne (2, 3) with lithium naphthalene in the presence of benzaldehyde in THF at −78 °C leads after hydrolysis with water to the corresponding chloroalkynol (5) resulting from a regioselective lithiation at the alkynylic position. However, the lithiation of 1-chloro-6-iodohex-1-yne (4) under the same reaction conditions and using pentan-3-one as electrophile leads to the corresponding chloroalcohol (6) from the exclusive lithiation at the aliphatic carbon-iodine bond. Double lithiation of compounds 2 and 3 under Barbier conditions allows the isolation of diols (9), whereas the two-step process leads to differently substituted diols 13. The monolithiation of (E)-1-bromo-6-chlorohex-1-ene (14) under the above conditions and using pentan-3-one as electrophile affords a mixture of chloroalcohols 15 and 16, the process being not stereospecific. However, the lithiation of the same starting material with t-BuLi leads exclusively to a bromine-lithium exchange with retention of the configuration, so after treatment with pentan-3-one only compound 16 was isolated. Finally, whereas double lithiation of compound 14 under the conditions for compounds 9 gives the mixture of compounds 18 and 19, the tandem process involving the t-BuLi-promoted bromine-lithium exchange as the first step followed by lithiation under DTBB-catalysed conditions allows the isolation of (E)-diols 19 as the only reaction products isolated.     

New iminophosphorane-mediated synthesis of thieno[3′,2′:4,5]thieno[3,2-d]pyrimidin-4(3H)-ones and 5H-2,3-dithia-5,7-diaza-cyclopenta[c,d]indenes

Mono(iminophosphorane) 4 was selectively prepared from the reaction of 3,4-diaminothieno[2,3-b]thiophene 3 with excess triphenylphosphine, C₂Cl₆, and Et₃N due to intramolecular double hydrogen bond formation. Mono(iminophosphorane) 4 reacted with aromatic isocyanates to give stable carbodiimides 8, which were further treated with aliphatic secondary or primary amines to give 2-amino substituted thieno[3′,2′:4,5]thieno[3,2-d]pyrimidin-4(3H)-ones 10 or 12 in the presence of a catalytic amounts of EtO⁻Na⁺. However, in the presence of a catalytic amounts of potassium carbonate, the carbodiimides 8 were transformed into previously unreported 5H-2,3-dithia-5,7-diaza-cyclopenta[c,d]indenes 13 via direct cyclization in high yields. The reaction of carbodiimides 8 with phenols in the presence of a catalytic amounts of potassium carbonate gave a mixture of 2-aryloxy substituted thieno[3′,2′:4,5]thieno[3,2-d]pyrimidin-4(3H)-ones 14 and 13. X-ray structure analysis of 10m supported the structure and the proposed reactivity of amino group.     

Intramolecular hydroamination catalysis using trans-N,N′-dibenzylcyclam zirconium complexes

The syntheses of (Bn₂Cyclam)Zr(NMe₂)₂ (1), (Bn₂Cyclam)Zr(NH^2,6-MePh)Cl (2) and (Bn₂Cyclam)Zr(N^2,6-MePh) (3) are described. The reactivity of 1, 3, (Bn₂Cyclam)Zr(CH₂Ph)₂ (4) and ((C₆H₄CH₂)₂Cyclam)Zr (5) as hydroamination catalysts of aminoalkenes is reported. High conversions of the primary gem-disubstituted aminoalkenes in 5- or 6-member ring N-heterocycles were observed. Reactions of 1, 4 and 5 with CH₂CHCH₂CPh₂CH₂NH₂ gave (Bn₂Cyclam)Zr(NHR)₂ (6) (R = CH₂CPh₂CH₂CHCH₂) that on heating converts sequentially into the mono-ortho-metallated species ((C₆H₄CH₂)BnCyclam)Zr(NHR) (7) and the bis-ortho-metallated ((C₆H₄CH₂)₂Cyclam)Zr (5), simultaneously with the hydroamination product.     

Ring transformation of cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium ion to the corresponding pyrrole derivatives via troponeimine intermediates: photo-induced autorecycling oxidizing reactions of some amines

Ring transformation of 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]furan- 8(7H),10(9H)-dionylium tetrafluoroborate 4⁺·BF₄⁻ to 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrrole-8(7H),10(9H)-dionylium tetrafluoroborate 6a-d⁺·BF₄⁻ consists of the reaction of 4⁺·BF₄⁻ with amines and subsequent exchange of the counter-ion using aq. HBF₄. Reactions of 4⁺·BF₄⁻ with aniline and 4-substituted anilines afforded the corresponding pyrrole derivatives 6a-c⁺·BF₄⁻ directly in good yields. On the other hand, reaction of 4⁺·BF₄⁻ with benzylamine gave the troponeimine intermediate 9, which was not converted to 6d⁺·BF₄⁻ and reverted to 4⁺·BF₄⁻ by adding HBF₄; however, it was converted to 6d⁺·BF₄⁻ upon treatment with (COCl)₂ or SOCl₂, followed by exchange of the counter-ion. In a search for the characteristics of 9, inspection and comparison of the X-ray crystal analyses, NMR and UV-vis spectra, and CV measurement of 9 and N,N-disubstituted troponeimine derivatives 12 were carried out to suggest the remarkable structure of 12 having ionic C-O bonding between the imine-carbon atom and the oxygen atom of the barbituric acid moiety in the solid state. Thus, characteristics of 9 were ascribed to the sterically hindered and favorable conformation of N-protonated troponeimine intermediates. Furthermore, novel photo-induced oxidation reactions of a series of 4⁺·BF₄⁻, 5⁺·BF₄⁻, and 6a,e⁺·BF₄⁻ towards some amines under aerobic conditions were carried out to give the corresponding imines in 455-8362% yields [based on compounds 4⁺, 5⁺, and 6a,e⁺], suggesting the oxidation reaction occurs in an autorecycling process. Mechanistic aspects of the amine-oxidation reaction are also postulated.     

The first entry to pyrrolo[2,3-c]quinoline-2,4(3aH,5H)-diones

Wittig olefination of 3-aminoquinoline-2,4(1H,3H)-diones 1 with ethyl (triphenylphosphoranylidene)acetate (Ph₃PCHCO₂Et) afforded (E)-3-amino-4-ethoxycarbonylmethylene-1,2,3,4-tetrahydro-2-quinolones (E)-2 and pyrrolo[2,3-c]quinoline-2,4(3aH,5H)-diones 3. An alternative approach for the synthesis of 3 via 3-bromoacetamidoquinoline-2,4(1H,3H)-diones 7, their corresponding triphenylphosphonium salts 8, and ylides A that undergo intramolecular Wittig reaction, was investigated. Under the applied reaction conditions, the phosphonium salts 8 and ylides A are so unstable that they partly decompose to 3-acetamidoquinoline-2,4(1H,3H)-diones 9 during the synthesis of 3.     

Synthesis and properties of 4,9-methanoundecafulvenes and their transformation to 3-substituted 7,12-methanocycloundeca[4,5]furo[2,3-d]pyrimidine-2,4(1H,3H)-diones: photo-induced autorecycling oxidizing reaction toward amines

The synthesis and properties of 4,9-methanoundecafulvene [5-(4,9-methanocycloundeca-2′,4′,6′,8′,10′-pentaenylidene)pyrimidine-2,4,6(1,3,5H)-trione] derivatives 8a,b were studied. Their structural characteristics were investigated on the basis of the ¹H and ¹³C NMR and UV-vis spectra. The rotational barrier (ΔG^‡) around the exocyclic double bond of 8a was found to be 12.55 kcal mol⁻¹ by the variable temperature ¹H NMR measurement. The electrochemical properties of 8a,b were also studied by CV measurement. Furthermore, the transformation of 8a,b to 3-substituted 7,12-methanocycloundeca[4,5]furo[2,3-d]pyrimidine-2,4(1H,3H)-diones 16a,b was accomplished by oxidative cyclization using DDQ and subsequent ring-opening and ring-closure. The structural details and chemical properties of 16a,b were clarified. Reaction of 16a with deuteride afforded C13-adduct 19 as the single product, and thus, the methano-bridge controls the nucleophilic attack to prefer endo-selectivity. The photo-induced oxidation reaction of 16a and a vinylogous compound, 3-methylcyclohepta[4,5]furo[2,3-d]pyrimidine-2,4(3H)-dione 2a, toward some amines under aerobic conditions were carried out to give the corresponding imines (isolated by converting to the corresponding 2,4-dinitrophenylhydrazones) with the recycling number of 6.1-64.0 (for 16a) and 2.7-17.2 (for 2a), respectively.     

Arene-catalysed lithiation of phenyl- and 1,1-diphenylcyclopropane: synthetic applications

The reaction of phenylcyclopropane (1) with an excess of lithium and a catalytic amount of DTBB (2.5% molar) in THF at room temperature, followed by treatment with an electrophile [Me₃SiCl, PhMe₂SiCl, t-BuCHO, PhCHO, Me₂CO, Et₂CO, (CH₂)₅CO, adamantan-2-one, i-Pr₂CO, di(cyclopropyl)ketone] and final hydrolysis with water leads to allylic products 10 or 11 depending on the structure of the electrophile: whereas for chlorosilanes or crowded ketones γ-products 11 are isolated, for aldehydes and non-congested ketones α-products 10 are formed. The application of the same protocol to 1,1-diphenylcyclopropane (7) leads to a mixture of products 13-15 resulting from the introduction of one or two electrophilic fragments to the open-chain mono- or dilithiated intermediate: also in this case the regiochemistry of the reaction is governed by steric reasons.     

Mononuclear ruthenium(II) complexes bearing the (S,S)-Pr-pybox ligand

The complexes trans-[RuCl₂(L){(S,S)-ⁱPr-pybox}] ((S,S)-ⁱPr-pybox = 2,6-bis[4′-(S)-isopropyloxazolin-2′-yl]pyridine, L = PMe₃ (1), P(OMe)₃ (2), PPh₂(CH₂CHCH₂) (3), CNBn (5), CNCy (6) and MeCN (7)) have been synthesized by substitution of ethylene on the precursor trans-[RuCl₂(η²-C₂H₄){(S,S)-ⁱPr-pybox}]. This complex also reacts with cyclooctadiene (cod) or norbornadiene (nbd) and NaPF₆, in refluxing methanol, giving the coordination compounds [RuCl(η⁴-cod){(S,S)-ⁱPr-pybox}][PF₆] (8) and [RuCl(η⁴-nbd){(S,S)-ⁱPr-pybox}][PF₆] (9). The structures of complexes [RuCl(CO)(PPh₃)(H-pybox)][BF₄] (H-pybox = 2,6-bis(dihydrooxazolin-2′-yl)pyridine) (4), 6 and 8, have been resolved by X-ray diffraction methods. The catalytic activity of the new complexes in transfer hydrogenation of acetophenone has also been examined.     

An expedient approach to tetrahydrofuro[3,2-b]pyridine-2(3H)-ones via activation of pyridine N-oxide by triflic anhydride

The double addition of bis(trimethylsilyl) ketene acetals [R₁, R₂ = CH₃, -(CH₂)₅-] to pyridine N-oxide promoted by triflic anhydride under mild conditions generates N-[(trifluoromethane)sulfonyl-1,2-dihydropyridine-2,4-dicarboxylic acids 2a-b. Subsequent reaction of these acids upon iodolactonization conditions affords tetrahydrofuro[3,2-b]pyridine-2(3H)-ones 3a-b containing an exo-insaturation on the products as a result of an unexpected decarboxylation.     

Syntheses of rac/meso-{PhP(3-t-Bu-C5H3)2}-Zr{RN(CH2)3NR}, structural analyses of rac-{PhP(3-t-Bu-C5H3)2}Zr{RN(CH2)3NR} (where R is SiMe3 or Ph), and meso to rac isomerization

Syntheses of rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{Me₃SiN(CH₂)₃NSiMe₃} (rac-3/meso-3) and rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{PhN(CH₂)₃NPh} (rac-4/meso-4) were achieved by metallation of K₂[PhP(3-t-Bu-C₅H₃)₂] · 1.3 THF (2) with Zr{RN(CH₂)₃NR}Cl₂(THF)₂ (where R = SiMe₃ or Ph, respectively) using ethereal solvent. These isomeric pairs were characterized by ¹H, ¹³C{¹H}, and ³¹P{¹H} NMR spectroscopy; rac-3 and rac-4 were also examined via single crystal X-ray crystallography. The structures of rac-3 and rac-4 are notable in the tendency of the cyclopentadienyl rings towards η³ coordination. While isolated samples of rac-3/meso-3 and rac-4/meso-4 slowly isomerize in tetrahydrofuran-d₈ to equilibrium ratios, the isomerization rate for 3 is more than 15-fold greater than that for 4. In addition, equilibrium ratios are rapidly reached when isolated samples of rac-3/meso-3 and rac-4/meso-4 are exposed to tetrabutylammonium chloride in tetrahydrofuran-d₈ solvent. We propose that a nucleophile (either chloride or the phosphine interannular linker) brings about dissociation of one cyclopentadienyl ring, thus promoting the rac/meso isomerization mechanism.