First-principles investigation of the surface structures of Cu(n, n−1, 0) (n=2, 3 and 4) stepped surfaces

Multilayer relaxation at high-index Cu(n, n−1, 0) (n=2, 3 and 4) stepped surfaces was determined by the first-principles pseudopotential plane wave (PPPW) method. For those surfaces that have n and n−1 atom-rows in terrace and subterrace, respectively, the topmost 2n−2 interlayer spacings contract, while the 2n−1st interlayer spacing expands. There is no similar rule found for the relaxations parallel to the surfaces. Compared with the bulk terminated structure, a thin compact layer, which consisted of the topmost 2n−1 atom layers and separated slightly from the underneath atom layers, makes the surface more flat after relaxation. The bond-lengths between the step edge (first layer) atom and its nearest-neighbors do not depend on the surface termination, but only on the local coordination.     

Density functional study of hypophosphite adsorption on Ni (1 1 1) and Cu (1 1 1) surfaces

Surface structures and electronic properties of hypophosphite, H₂PO₂⁻, molecularly adsorbed on Ni(1 1 1) and Cu(1 1 1) surfaces are investigated in this work by density functional theory at B3LYP/6-31++g(d, p) level. We employ a four-metal-atom cluster as the simplified model for the surface and have fully optimized the geometry and orientation of H₂PO₂⁻ on the metal cluster. Six stable orientations have been discovered on both Ni (1 1 1) and Cu (1 1 1) surfaces. The most stable orientation of H₂PO₂⁻ was found to have its two oxygen atoms interact the surface with two PO bonds pointing downward. Results of the Mulliken population analysis showed that the back donation from 3d orbitals of the transition metal substrate to the unfilled 3d orbital of the phosphorus atom in H₂PO₂⁻ and 4s orbital's acceptance of electron donation from one lone pair of the oxygen atom in H₂PO₂⁻ play very important roles in the H₂PO₂⁻ adsorption on the transition metals. The averaged electron configuration of Ni in Ni₄ cluster is 4s^0.634p^0.023d^9.35 and that of Cu in Cu₄ cluster is 4s^1.004p^0.033d^9.97. Because of this subtle difference of electron configuration, the adsorption energy is larger on the Ni surface than on the Cu surface. The amount of charge transfers due to above two donations is larger from H₂PO₂⁻ to the Ni surface than to the Cu surface, leading to a more positively charged P atom in Ni_nH₂PO₂⁻ than in Cu_nH₂PO₂⁻. These results indicate that the phosphorus atom in Ni_nH₂PO₂⁻ complex is easier to be attacked by a nucleophile such as OH⁻ and subsequent oxidation of H₂PO₂⁻ can take place more favorably on Ni substrate than on Cu substrate.     

Surface structure of K/Pd(1 0 0) and the effect of H coadsorption: Density functional theory calculations

We have performed density-functional theory calculations to study the atomic structure of the K/Pd(1 0 0)-p(2 × 2) and -c(2 × 2) surfaces formed at 0.25 ML and 0.5 ML, respectively. We find that K atoms prefer the hollow site with the K adsorption height 2.44 Å for p(2 × 2) and 2.50 Å c(2 × 2). The first interlayer spacing (d₁₂) of the Pd(1 0 0) substrate appears slightly contracted from the bulk value as Δd₁₂ = −0.8% and −0.3% for p(2 × 2) and c(2 × 2), respectively. The calculated contraction Δd₁₂ = −0.3% for c(2 × 2) is not in accord with the expansion Δd₁₂ = +1.3% reported by a low-energy electron diffraction (LEED) study. As the origin of this difference, a possibility of hydrogen contamination of the surface sample used in the LEED study is suggested: Our calculations show that the d₁₂ of K/Pd(1 0 0)-c(2 × 2) increases linearly with the coverage of H coadsorption, which leads to an estimation for the H coverage of the surface sample as 0.1-0.4 ML.     

The multiphoton ionization spectrum of jet-cooled pyrimidine in the 3p Rydberg and B1 (π,n) states

Resonance-enhanced multiphoton ionization (REMPI) has been applied to study the n → 3p Rydberg transition of pyrimidine (jet-cooled sample and mass resolved spectrum). Only the one component, the 3p_z(B₂), appears in the (2 + 1) REMPI and the active vibrations are ν_6a = 622, ν₁ = 946, and ν_9a = 1116 cm⁻¹. The symmetry of the state was determined by polarization measurements (linear, circular polarization). The first (π^∗,n) ³B₁ triplet state appears as a one-photon resonance in the three-photon ionization process.     

Illumination dependence of I-V and C-V characterization of Au/InSb/InP(1 0 0) Schottky structure

The effects of surface preparation and illumination on electric parameters of Au/InSb/InP(100) Schottky diode were investigated, in the later diode InSb forms a fine restructuration layer allowing to block In atoms migration to surface. In order to study the electric characteristics under illumination, we make use of an He-Ne laser of 1 mW power and 632.8 nm wavelength. The current-voltage I(V_G), the capacitance-voltage C(V_G) measurements were plotted and analysed. The saturation current I_s, the serial resistance R_s and the mean ideality factor n are, respectively, equal to 2.03 × 10⁻⁵ A, 85 Ω, 1.7 under dark and to 3.97 × 10⁻⁵ A, 67 Ω, 1.59 under illumination. The analysis of I(V_G) and C(V_G) characteristics allows us to determine the mean interfacial state density N_ss and the transmission coefficient θ_n equal, respectively, to 4.33 × 10¹² eV⁻¹ cm⁻², 4.08 × 10⁻³ under dark and 3.79 × 10¹² eV⁻¹ cm⁻² and 5.65 × 10⁻³ under illumination. The deep discrete donor levels presence in the semiconductor bulk under dark and under illumination are responsible for the non-linearity of the C⁻²(V_G) characteristic.     

Chlorine chemisorption on Cu(0 0 1) by surface X-ray diffraction: Geometry and substrate relaxation

We report on the precise location of Cl atoms chemisorbed on a Cu(0 0 1) surface and the interlayer relaxations of the metal surface. Previous studies have shown that chlorine dissociates on Cu(0 0 1) to form a c(2 × 2) chemisorbed layer with Cl atoms occupying four-fold hollow sites. A Cu-Cl interlayer spacing of 1.60 Å and a slightly expanded Cu-Cu first interlayer spacing of 1.85 Å (1.807 Å for bulk Cu) was determined by LEED. The resulting Cu-Cl bond length, 2.41 Å, is very similar to the SEXAFS value of 2.37 Å. Contradictory results were obtained by angle-resolved photoemission extended fine structure: while confirming the Cu-Cl interlayer spacing of 1.60 Å, no first Cu-Cu interlayer relaxation has been observed. On the other hand, a small corrugation of the second Cu layer was pointed out. We carried out a detailed structural determination of the Cu(0 0 1)-c(2 × 2)-Cl system using surface X-ray diffraction technique with synchrotron radiation. We find a Cu-Cl interlayer spacing of 1.584(5) Å and confirm the expansion of the first Cu-Cu interlayer, with an average spacing of 1.840(5) Å. In addition, we observe a small corrugation of the second Cu layer, with Cu atoms just below Cl atoms more tightly bound to the surface layer, and even a second Cu-Cu interlayer expansion.     

Oxygen-induced p(3 × 1) reconstruction of the W(1 0 0) surface

The oxidation of the W(1 0 0) surface at elevated temperatures has been studied using room temperature STM and LEED. High exposure of the clean surface to O₂ at 1500 K followed by flash-annealing to 2300 K in UHV results in the formation of a novel p(3 × 1) reconstruction, which is imaged by STM as a missing-row structure on the surface. Upon further annealing in UHV, this surface develops a floreted LEED pattern characteristic of twinned microdomains of monoclinic WO_x, while maintaining the p(3 × 1) missing-row structure. Atomically resolved STM images of this surface show a complex domain structure with single and double W〈0 1 0〉 rows coexisting on the surface in different domains.     

Development of electronic structure of Ni thin films on Cu(0 0 1) surfaces

We have traced the development of the Ni electronic structure with thickness variation on flat and nano-structured Cu(0 0 1) surfaces by means of photoemission spectroscopy. The binding energy of the Ni 2p_3/2 main peak and satellite peak is found to have shifted monotonically in the direction opposite to each other, with the increase of Ni coverage. The reduced binding energy of the thin film’s main peak is strongly correlated to the Cu 4s/Ni 3d interfacial hybridization effect (s/d IHE) and the narrowing of the d band with the reduction of dimensions, while the increased satellite binding energy results from the combination of interface hybridization and expansion of an extended 4s-like state towards the vacuum. The center of the Ni d_xy band is predicted to shift closer to the Fermi level with increasing film thickness. Enhanced satellite intensity in thin films is observed, correlating to the narrowing of the d band with decreased film thickness. Through comparison of Ni films grown on flat versus nano-structured Cu(0 0 1) surfaces, the mixing of Cu and Ni atoms is found to be enhanced at the terrace edge region and consequently a larger s/d IHE is predicted for Ni on the nano-structured surface.     

Magnetic ordering of Vn/Mo(0 0 1) systems: Ab-initio calculations

A density-functional theory (DFT) study is performed using a full-potential linearized-augmented-plane-waves (FP-LAPW) method to investigate the magnetic structure of vanadium-molybdenum systems (V_n/Mo(0 0 1), n = 1, 2). The topmost V layers relax inward in both systems with a larger contraction in V₂/Mo(0 0 1) system. A p(1 × 1) in-plane ferromagnetic ordering with appreciable magnetic moments is obtained on V overlayers, which is found to be the ground state in both systems. The layers below the surface exhibit induced magnetism with antiferromagnetic interlayer coupling.     

Reaction of SO2 with Cu/TiO2(1 1 0): Effects of size and metal-oxide interactions in the chemical activation of Cu nanoparticles

The reaction of SO₂ with stoichiometric TiO₂(1 1 0), partially reduced TiO_2 − x(1 1 0) and Cu/TiO₂(1 1 0) was investigated using synchrotron based X-ray photoemission spectroscopy. SO₂ adsorbs on perfect TiO₂(1 1 0) forming SO₄ species at room temperature, while SO₂ dissociatively adsorbs on partially reduced TiO_2 − x(1 1 0) forming SO₄, SO₃ as well as two sulfide species. SO₂ exposure to Cu particles supported on perfect TiO₂(1 1 0) can lead to the formation of SO₄, SO₃ and sulfide species. When depositing Cu on SO₄/TiO₂(1 1 0) at room temperature, the dissociation efficiency of Cu atoms is much higher than that of Cu deposited on TiO₂(1 1 0) prior to SO₂ dosing. The post-deposited Cu atoms can efficiently contact and react with SO₄ species before they form Cu-Cu bonds and big clusters. Small Cu nanoparticles supported on TiO₂(1 1 0) are more reactive towards SO₂ than surfaces of bulk copper. The chemical reactivity of the Cu/TiO₂(1 1 0) system increases with Cu coverage until reaching a maximum at θ_Cu = 0.5-0.8 ML. After this point, an increase in Cu coverage leads to the formation of big Cu particles and the reactivity of the system decrease to that typical of bulk Cu. A comparison with results for SO₂/Cu/MgO(0 0 1) indicates that the effects of size and metal ↔ oxide interactions are important for the chemical activation of Cu nanoparticles on titania.     

The bΣ(b0) → XΣ(X10,X21) and aΔ(a2) → X21 transitions of AsBr

Emission spectra of the b¹Σ⁺(b0⁺) → X³Σ⁻(X₁0⁺,X₂1) and a¹Δ(a2) → X₂1 transitions of AsBr have been measured in the near-infrared spectral region with a Fourier-transform spectrometer. The arsenic bromide radicals were generated in fast-flow systems by reaction of arsenic vapor (As_x) with bromine and were excited by microwave-discharged oxygen. The most prominent features in the spectrum are the Δv = +1,0,−1, and −2 band sequences of the b¹Σ⁺(b0⁺) → X³Σ⁻(X₁0⁺) transition in the range 11 700-12 700 cm⁻¹. With lower intensities, the Δv = 0 and −1 sequences of the b¹Σ⁺(b0⁺) → X³Σ⁻(X₂1) sub-system show up in the same range. Further to the red, between 6000 and 6700 cm⁻¹, the Δv = 0, +1, and −1 sequences of the hitherto unknown a¹Δ(a2) → X₂1 transition are observed. Analyses of medium- and high-resolution spectra have yielded improved molecular constants for the X₁0⁺, X₂1, and b0⁺ states and first values of the electronic energy and the vibrational constants of the a2 state.     

Infrared reflection absorption study of carbon monoxide adsorption on Cu(1 0 0)-c(2 × 2)-Pd surfaces formed by palladium vacuum-depositions at various temperatures

Using infrared reflection absorption spectroscopy (IRRAS) and temperature programmed desorption (TPD), we investigated carbon monoxide (CO) adsorption and desorption behaviors on atomic checkerboard structures of Cu and Pd formed by Pd vacuum deposition at various temperatures of Cu(1 0 0). The 0.15-nm-thick Pd deposition onto a clean Cu(1 0 0) surface at room temperature (RT) showed a clear c(2 × 2) low-energy electron diffraction (LEED) pattern, i.e. Cu(1 0 0)-c(2 × 2)-Pd. The RT-CO exposure to the c(2 × 2) surfaces resulted in IRRAS absorption caused by CO adsorbed on the on-top sites of Pd. The LEED patterns of the Pd-deposited Cu(1 0 0) at higher substrate temperatures revealed less-contrasted c(2 × 2) patterns. The IRRAS intensities of the linearly bonded CO bands on 373-K-, 473-K-, and 673-K-deposited c(2 × 2) surfaces are, respectively, 25%, 22%, and 10% less intense than those on the RT-deposited surface, indicating that Pd coverages at the outermost c(2 × 2) surfaces decrease with increasing deposition temperature. In the initial stage of the 90-K-CO exposure to the RT surface, the band attributable to CO bonded to the Pd emerged at 2067 cm⁻¹ and shifted to higher frequencies with increasing CO exposure. At saturation coverage, the band was located at 2093 cm⁻¹. In contrast, two distinct bands around 2090 cm⁻¹ were apparent on the spectrum of the 473-K-deposited surface: the CO saturation spectrum was dominated by an apparent single absorption at 2090 cm⁻¹ for the 673-K-deposited surface. The TPD spectra of the surfaces showed peaks at around 200 and 300 K, which were ascribable respectively to Cu-CO and Pd-CO. Taking into account the TPD and IRRAS results, we discuss the adsorption-desorption behaviors of CO on the ordered checkerboard structures.     

A DFT study the solvent effects of H2 adsorption on Cu(h k l) surface

Density functional theory (DFT) combined with conductor-like solvent model (COSMO) have been performed to study the solvent effects of H₂ adsorption on Cu(h k l) surface. The result shows H₂ can not be parallel adsorbed on Cu(h k l) surface in gas phase and only vertical adsorbed. At this moment, the binding energies are small and H₂ orientation with respect to Cu(h k l) surfaces is not a determining parameter. In liquid paraffin, when H₂ adsorbs vertically on Cu(h k l) surface, solvent effects not only influences the adsorptive stability, but also improves the ability of H₂ activation; When H₂ vertical adsorption on Cu(h k l) surface at 1/4 and 1/2 coverage, H-H bond is broken by solvent effects. However, no stable structures at 3/4 and 1 ML coverage are found, indicating that it is impossible to get H₂ parallel adsorption on Cu(h k l) surfaces at 3/4 and 1 ML coverages due to the repulsion between adsorbed H₂ molecules.     

On the preparation and electronic properties of clean W(1 1 0) surfaces

We have studied the influence of oxygen pressure during the cyclic annealing used for the cleaning of W(1 1 0) surfaces. For this purpose the surface morphology and electronic properties are measured by means of scanning tunneling microscopy (STM) and spectroscopy (STS), respectively. It is found that the surfaces with impurity atom densities as low as 2 × 10⁻³ can be obtained by gradually reducing the oxygen pressure between subsequent annealing cycles down to about 2 × 10⁻⁸ mbar in the final cycle. Only on the clean surface a bias-dependent spatial modulation of the local density of states (LDOS) is observed at step edges and around impurity sites by STS. In addition, we find a pronounced peak in the occupied states. In combination with density functional theory calculations these features can be traced back to a dispersive p_z-d_xz-type surface resonance band and the lower band edge of a surface state, respectively.     

High resolution analysis of the rotational levels of the (0 0 0), (0 1 0), (1 0 0), (0 0 1), (0 2 0), (1 1 0) and (0 1 1) vibrational states of SO2

A high resolution (0.0018 cm⁻¹) Fourier transform instrument has been used to record the spectrum of an enriched ³⁴S (95.3%) sample of sulfur dioxide. A thorough analysis of the ν₂, 2ν₂ − ν₂, ν₁, ν₁ + ν₂ − ν₂, ν₃, ν₂ + ν₃ − ν₂, ν₁ + ν₂ and ν₂ + ν₃ bands has been carried out leading to a large set of assigned lines. From these lines ground state combination differences were obtained and fit together with the existing microwave, millimeter, and terahertz rotational lines. An improved set of ground state rotational constants were obtained. Next, the upper state rotational levels were fit. For the (0 1 0), (1 1 0) and (0 1 1) states, a simple Watson-type Hamiltonian sufficed. However, it was necessary to include explicitly interacting terms in the Hamiltonian matrix in order to fit the rotational levels of the (0 2 0), (1 0 0) and (1 0 1) states to within their experimental accuracy. More explicitly, it was necessary to use a ΔK = 2 term to model the Fermi interaction between the (0 2 0) and (1 0 0) levels and a ΔK = 3 term to model the Coriolis interaction between the (1 0 0) and (0 0 1) levels. Precise Hamiltonian constants were derived for the (0 0 0), (0 1 0), (1 0 0), (0 0 1), (0 2 0), (1 1 0) and (0 1 1) vibrational states.     

Investigation on the magnetocaloric effect in DyNi2, DyAl2 and Tb1−nGdnAl2 (n=0, 0.4, 0.6) compounds

The magnetocaloric effect (MCE) in the DyNi₂, DyAl₂ and Tb_1−nGd_nAl₂ (n=0, 0.4, 0.6) was theoretically investigated in this work. The DyNi₂ and DyAl₂ compounds are described considering a model Hamiltonian which includes the crystalline electrical field anisotropy. The anisotropic MCE was calculated changing the magnetic field direction from 〈1 1 1〉 to 〈0 0 1〉 in DyNi₂ and from 〈1 0 0〉 to 〈0 1 1〉 in DyAl₂. The influence of the second- and first-order spin-reorientation phase transitions on the MCE that occurs in these systems is discussed. For the calculations of the MCE thermodynamic quantities in the Tb_1−nGd_nAl₂ systems we take into account a two sites magnetic model, and good agreement with the available experimental data was obtained.     

Cu adsorption on pyrite (1 0 0): Ab initio and spectroscopic studies

Surface optimised S 2p photoelectron spectra show that both surface S²⁻ monomers and (S-S)²⁻ dimers are present at pyrite (1 0 0) fracture surfaces. In order to determine which sulfur species are involved in Cu adsorption, fresh pyrite surfaces were exposed to Cu²⁺ in solution. The S 2p spectra suggest that both types of S surface species are involved in the mechanism of Cu adsorption (activation). Ab initio density functional theory was used to model Cu adsorbed onto pyrite (1 0 0) to support the interpretation of the spectroscopy. Mulliken population analysis confirms the charge distribution suggested by the core line shifts as observed in the photoelectron spectra. The ab initio calculations were consistent with a two-coordinate bond between Cu(I), a surface S monomer and a surface S dimer.     

Comparative investigation of the c(2 × 2)-Si/Cu(0 1 1) and (√3 × √3)R30°-Cu2Si/Cu(1 1 1) surface alloys using DFT

The electronic structure of the c(2 × 2)-Si/Cu(0 1 1) surface alloy has been investigated and compared to the structures seen in the three phases of the (√3 × √3)R30°Cu₂Si/Cu(1 1 1) system, using LCAO-DFT. The weighted surface energy increase between the alloyed Cu(0 1 1) and Cu(1 1 1) surfaces is 126.7 meV/Si atom. This increase in energy for the (0 1 1) system when compared to the (1 1 1) system is assigned to the transition from a hexagonal to a rectangular local bonding environment for the Si ion cores, with the hexagonal environment being energetically more favorable. The Si 3s state is shown to interact covalently with the Cu 4s and 4p states whereas the Si 3p state, and to a lesser extent the Si 3d state, forms a mixture of covalent and metallic bonds with the Cu states. The Cu 4s and 4p states are shown to be altered by approximately the same amount by both the removal of Cu ion cores and the inclusion of Si ion cores during the alloying of the Cu(0 1 1) surface. However, the Cu 3d states in the surface and second layers of the alloy are shown to be more significantly altered during the alloying process by the removal of Cu ion cores from the surface layer rather than by the addition of Si ion cores. This is compared to the behavior of the Cu 3d states in the surface and second layers of the each phase of the (√3 × √3)R30°-Cu₂Si/Cu(1 1 1) alloy and consequently the loss of Cu-Cu periodicity during alloying of the Cu(0 1 1) surface is conjectured as the driving force for changes to the Cu 3d states. The accompanying changes to the Cu 4s and 4p states in both the c(2 × 2)-Si/Cu(0 1 1) and (√3 × √3)R30°-Cu₂Si/Cu(1 1 1) alloys are quantified and compared. The study concludes with a brief quantitative study of changes in the bond order of the Cu-Cu bonds during alloying of both Cu(0 1 1) and Cu(1 1 1) surfaces.     

The influence of hydrogen on the electronic and magnetic structures of TM(0 0 1) (TM=Fe, Co, Ni, and Cu) surfaces and interfaces: Ab-initio calculations

We present ab-initio investigation of the electronic and magnetic structure of TM(0 0 1) surfaces and TM/Cu(0 0 1) systems (TM=Fe, Co, Ni, Cu) with and without hydrogen adsorbed layer. The adsorption energy of hydrogen atom is found to be energetically more stable above the surface layer of Ni(0 0 1) surface than other TM(0 0 1) surfaces. The adsorption energies of hydrogen on TM/Cu(0 0 1) systems are larger than those on TM(0 0 1) surfaces. The relaxed geometries show that hydrogen has a strong influence on the interlayer distance. Furthermore, a marked reduction of Fe, Co, and Ni surface magnetic moments to 2.54, 1.41 and 0.25 μ_B, respectively, is obtained due to the presence of hydrogen.     

Iron isotope effect on Tc in optimally-doped (Ba,K)Fe2As2 (Tc = 38 K) and SmFeAsO1−y (Tc = 54 K) superconductors

We report the iron isotope effect on a transition temperature (T_c) in an optimally-doped (Ba,K)Fe₂As₂ (T_c = 38 K) and SmFeAsO_1−y (T_c = 54 K) superconductors. In order to obtain the reliable isotope shift in T_c, twin samples with different iron isotope mass are synthesized in the same conditions (simultaneously) under high-pressure. We have found that (Ba,K)Fe₂As₂ shows an inverse iron isotope effect α_Fe = −0.18 ± 0.03 while SmFeAsO_1−y shows a small iron isotope effect α_Fe = −0.02 ± 0.01, where the isotope exponent α is defined by T_c ∼ M^−α (M is the isotopic mass). The results show that α_Fe changes in the iron-based superconductors depending on the system. The distinct iron isotope effects imply the exotic coupling mechanism in the iron-based superconductors.