Epitaxial growth of Au and Pt on Fe3O4(1 1 1) surface

We have studied the epitaxial growth of Au and Pt layers on Fe₃O₄(1 1 1) as a function of the deposition temperature and thickness. The layers were deposited by UHV sputtering and the structural properties were investigated by reflection high energy electron diffraction (RHEED), X-ray experiments and transmission electron microscopy (TEM). The epitaxial growth of both metals was obtained whatever the deposition conditions but the wetting is however different for the two metals. Comparison between the coverage ratios of Au and Pt is correlated with their surface and interfaces energies. The optimum conditions to achieve a 2D flat epitaxial metallic layer are determined.     

Surface morphology of epitaxial lattice-matched Ba0.7Sr0.3O on Si(0 0 1) and vicinal Si(0 0 1)-4°[1 1 0] substrates

Exploring ways for self-organized structuring of insulating thin films, we investigated the possibility to produce replicas of step trains, given by a vicinal Si(0 0 1)-4°[1 1 0] surface, in layers of crystalline and perfectly lattice-matched Ba_0.7Sr_0.3O. For this purpose, we carried out high-resolution spot profile analyses in low-energy electron diffraction (SPA-LEED) both on flat Si(0 0 1) and on Si(0 0 1)-4°[1 1 0]. Oxide layers were generated by evaporating the metals in oxygen ambient pressure with the sample at room temperature. Our G(S) analysis of these mixed oxide layers reveals a strong influence of local compositional fluctuations of Sr and Ba ions and their respective scattering phases, which appears as an unphysically large variation of layer distances. Nevertheless, we are able to show that quite smooth and closed oxide films are obtained with an rms roughness of about 1 ML. These Ba_0.7Sr_0.3O films directly follow the step train of Sr-modified vicinal Si surfaces that form (1 1 3) oriented facets after adsorption of a monolayer of Sr. This proves that self-organized structuring of insulating films can indeed be an effective method.     

Formation and characterization of Rh-Mo bimetallic layers on the TiO2(1 1 0) surface

The investigation of Rh, Mo and Rh-Mo nanosized clusters formed by physical vapor deposition on TiO₂(1 1 0) single crystal was performed by X-ray Photoelectron Spectroscopy (XPS), Low Energy Ion Scattering (LEIS) and Auger Electron Spectroscopy (AES). There was no sign for site-exchange between Mo and Rh atoms during deposition of Mo onto Rh particles at 330 K. Mixing between Ti and Mo ions was facilitated at the Mo particle-titania interface due to reaction at 550-700 K. The redox process between titania and Mo deposit was hindered at 330 K by forming predeposited rhodium layer (Θ_Rh = 2.0 ML), but reached nearly the same extent as without Rh after moderate heating to 600 K. The encapsulation of Rh by titania was complete by about 700 K in the presence of 1.2 ML Mo, in case of Mo-predeposition and Mo-postdeposition as well. Elevating the temperature of TiO₂/Rh-Mo layers above 700 K, these metals form alloy at the Mo-Rh interface irrespective of deposition sequences.     

Hydroxylated α-Al2O3 (0 0 0 1) surfaces and metal/α-Al2O3 (0 0 0 1) interfaces

X-ray photoelectron spectroscopy was applied to study the hydroxylation of α-Al₂O₃ (0 0 0 1) surfaces and the stability of surface OH groups. The evolution of interfacial chemistry of the α-Al₂O₃ (0 0 0 1) surfaces and metal/α-Al₂O₃ (0 0 0 1) interfaces are well illustrated via modifications of the surface O1s spectra. Clean hydroxylated surfaces are obtained through water- and oxygen plasma treatment at room temperature. The surface OH groups of the hydroxylated surface are very sensitive to electron beam illumination, Ar⁺ sputtering, UHV heating, and adsorption of reactive metals. The transformation of a hydroxylated surface to an Al-terminated surface occurs by high temperature annealing or Al deposition.     

Adsorption of water on thin V2O3(0 0 0 1) films

V₂O₃(0 0 0 1) films have been grown epitaxially on Au(1 1 1) and W(1 1 0). Under typical UHV conditions these films are terminated by a layer of vanadyl groups as has been shown previously [A.-C. Dupuis, M. Abu Haija, B. Richter, H. Kuhlenbeck, H.-J. Freund, V₂O₃(0 0 0 1) on Au(1 1 1) and W(1 1 0): growth, termination and electronic structure, Surf. Sci. 539 (2003) 99]. Electron irradiation may remove the oxygen atoms of this layer. H₂O adsorption on the vanadyl terminated surface and on the reduced surface has been studied with thermal desorption spectroscopy (TDS), vibrational spectroscopy (IRAS) and electron spectroscopy (XPS) using light from the BESSY II electron storage ring in Berlin. It is shown that water molecules interact only weakly with the vanadyl terminated surface: water is adsorbed molecularly and desorbs below room temperature. On the reduced surface water partially dissociates and forms a layer of hydroxyl groups which may be detected on the surface up to T ∼ 600 K. Below ∼330 K also co-adsorbed molecular water is detected. The water dissociation products desorb as molecular water which means that they recombine before desorption. No sign of surface re-oxidation could be detected after desorption, indicating that the dissociation products desorb completely.     

Ab-initio investigation of Ni(Fe)/ZrO2(0 0 1) and Ni-Fe/ZrO2(0 0 1) interfaces

The atomic and electronic structures of Me/ZrO₂(0 0 1) interfaces, where Me is Ni, Fe or a Ni-Fe alloy, are investigated by the plane wave pseudopotential method within density-functional theory. The work of separation of metal films from oxide substrate for the O- and Zr-terminated Me/ZrO₂(0 0 1) interfaces is calculated. High adhesion at both Me/(ZrO₂)_O and Me/(ZrO₂)_Zr interfaces is found. The effect of oxygen vacancies on the adhesion at the metal-ceramic interfaces is also investigated. It is shown that Ni(Fe)-O interaction at the O-terminated interface weakens in the presence of interfacial oxygen vacancies. At interfaces with Ni-Fe alloys the adhesion depends strongly on the composition of the interfacial layers and their magnetic properties.     

Growth of nano-crystalline metal dots on the Si(1 1 1)-7 × 7 surface saturated with C2H5OH

Metal atom on the Si(1 1 1)-7 × 7 surface undergoes migration by hopping among Si-adatom and Si-rest atom. If the hopping migration is prohibited, how change the deposited metals? In this paper, we studied the deposition of metals on the Si(1 1 1)-7 × 7 surface saturated with C₂H₅OH, on which the whole Si-rest atoms are changed to Si-H so that the hoping migration of metals will be prohibited. We found the growth of ca. 5 nm of crystalline dots by the deposition of Sn, Zn and Ag. Interestingly, Ag dots undergo layer-by-layer growth so that the surface is covered with 5 nm size dots with uniform height. When the hopping migration is prohibited, growth of dots is controlled by the kinetics of precursor state atoms instead of the lattice energy relating to lattice matching or strain.     

Magnetoresistance of magnetite thin films grown by pulsed laser deposition on GaAs(1 0 0) and Al2O3(0 0 0 1)

Magnetotransport properties of magnetite thin films deposited on gallium arsenide and sapphire substrates at growth temperatures between 473 and 673 K are presented. The films were grown by UV pulsed laser ablation in reactive atmospheres of O₂ and Ar, at working pressure of 8 × 10⁻² Pa. Film stoichiometry was determined in the range from Fe_2.95O₄ to Fe_2.97O₄. Randomly oriented polycrystalline thin films were grown on GaAs(1 0 0) while for the Al₂O₃(0 0 0 1) substrates the films developed a (1 1 1) preferred orientation. Interfacial Fe³⁺ diffusion was found for both substrates affecting the magnetic behaviour. The temperature dependence of the resistance and magnetoresistance of the films were measured for fields up to 6 T. Negative magnetoresistance values of ∼5% at room temperature and ∼10% at 90 K were obtained for the as-deposited magnetite films either on GaAs(1 0 0) or Al₂O₃(0 0 0 1).     

Corrosion behaviour of sintered NdFeB coated with Al/Al2O3 multilayers by magnetron sputtering

Al/Al₂O₃ multilayers were deposited on sintered NdFeB magnets to improve the corrosion resistance. The amorphous Al₂O₃ films were used to periodically interrupt the columnar growth of the Al layers. The structure of the multilayers was investigated by Scanning Electron Microscopy (SEM) and High Resolution Transmission Electron Microscopy (HRTEM). It was found that the columnar structure was effectively inhibited in the multilayers. Subsequent corrosion testing by potentiodynamic polarization in 3.5 wt.% NaCl and neutral salt spray test (NSS) revealed that the Al/Al₂O₃ multilayers had much better corrosion resistance than the Al single layer. Furthermore, for multilayers with similar thickness, the corrosion resistance was improved as the period decreased.     

Magneto-optical study of slanted Co nanowires embedded in CeO2/SrTiO3(0 0 1)

Sequential pulsed laser deposition of CoO and CeO₂ at 650 °C under vacuum leads to the formation of a slanted Co nanowires assembly embedded in CeO₂/SrTiO₃(0 0 1) epilayers. High temperature magneto-optical Faraday measurements were performed, which revealed a Faraday ellipticity of 1.3° at a wavelength of 450 nm for 300 nm thick samples and which allowed to access the magnetic properties. From the analysis of the coercivity dependence on temperature, it is shown that the magnetic anisotropy of the slanted Co nanowires is dominated by shape anisotropy and that their magnetization reversal is localized.     

Growth and oxidation of Cr films on the W(1 0 0) surface

The growth and oxidation of Cr films on the W(1 0 0) surface have been studied with low energy electron microscopy (LEEM) and diffraction (LEED). Cr grows in a Stranski-Krastanov (SK) mode above about 550 K and in a kinetically limited layer-by-layer mode at lower temperature. Stress relief in the highly strained pseudomorphic (ps) Cr film appears to be achieved by the formation of (4 × 4) periodic inclusions during the growth of the third layer between 575 and 630 K and by growth morphological instabilities of the third layer at higher temperature. Kinetic or stress-induced roughening is observed at lower temperature. In the SK regime, three-dimensional (3D) Cr islands nucleate after the growth of three Cr layers. 3D island nucleation triggers dewetting of one layer from the surrounding Cr film. Thus, two ps Cr layers are thermodynamically stable. However, one and two layer ps Cr films are unstable during oxidation. 3D clusters, that produce complex diffraction features and are believed to be Cr₂O₃, are formed during oxidation of one Cr layer at elevated temperature, T ? 790 K. The single layer Cr film remains intact during oxidation at T ? 630 K. 3D bulk Cr clusters are formed predominantly during oxidation of two ps Cr layers.     

Photoluminescence investigation of ferromagnetic Ga1−xMnxN layers with GaN templates grown on sapphire (0 0 0 1) substrates

We have investigated the temperature and composition dependent photoluminescence (PL) spectra in Ga_1−xMn_xN layers (where x ≈ 0.1-0.8%) grown on sapphire (0 0 0 1) substrates using the plasma-enhanced molecular beam epitaxy technique. The efficient PL is peaked in the red (1.86 eV), yellow (2.34 eV), and blue (3.29 eV) spectral range. The band-gap energy of the Ga_1−xMn_xN layers decreased with increasing temperature and manganese composition. The band-gap energy of the Ga_1−xMn_xN layers was modeled by the Varshni equation and the parameters were determined to be α = 2.3 × 10⁻⁴, 2.7 × 10⁻⁴, 3.4 × 10⁻⁴ eV/K and β = 210, 210, and 230 K for the manganese composition x = 0.1%, 0.2%, and 0.8%, respectively. As the Mn concentration in the Ga_1−xMn_xN layers increased, the temperature dependence of the band-gap energy was clearly reduced.     

Interaction of alkali metals with the Fe3O4(1 1 1) Surface

The adsorption and interaction of alkali metals (Li, Na, K, Rb and Cs) with the Fe_tet1-terminated Fe₃O₄(1 1 1) surface have been computed at the level of density functional theory. At low coverage, adsorption of alkali metals on site-1 (O_a-O_c-O_d) is energetically more favorable than on site-2 (O_a-O_c-O_d). Li has the strongest adsorption energy, followed by K, Rb, Cs and Na. The computed net charges show that the alkali metals can donate electrons to surface Fe and O atoms in the order of Li < Na < K ≈ Rb ≈ Cs. It is also noted that increasing the coverage does not significantly improve the promoting effect of alkali metals. In addition, alkali metals can move facilely on the Fe₃O₄(1 1 1) surface.     

Scanning tunneling microscopy and spectroscopy investigations of copper phthalocyanine adsorbed on Al2O3/Ni3Al(1 1 1)

Low temperature scanning tunneling microscopy (LT-STM) and scanning tunneling spectroscopy (STS) have been used to investigate adsorbed copper phthalocyanine (C₃₂H₁₆N₈Cu) molecules on an ordered ultrathin Al₂O₃ film on the Ni₃Al(1 1 1) surface as a function of coverage and annealing temperature. For sub-monolayer coverage and a deposition temperature of 140 K two different planar molecular adsorption configurations rotated by 30° with respect to each other were observed with submolecular resolution in the STM images. The template effect of the underlying oxide film on the CuPc orientation, however, is only weak and negligible at higher coverages. For θ_CuPc ≈ 1 ML, before completion of the first layer, the growth of a second layer was already observed. The measured spacing of 3.5 Å between first and second layer corresponds to the distance between the layers in the α-modification of crystalline CuPc. The molecules deposited at 140 K are thermally stable upon prolonged annealing to temperatures up to 250 K. By the use of STS the lowest unoccupied molecular orbital (LUMO) of the adsorbed copper phthalocyanine molecules has been identified at an energy of 1.2 eV above E_F. The lateral distribution of the electronic states of the CuPc has been analyzed and mapped by STS.     

Reaction of O2 with the boron-terminated TaB2(0 0 0 1) surface

X-ray photoelectron spectroscopy has been used to study the clean TaB₂(0 0 0 1) surface and its reaction with O₂. In agreement with previous studies, XPS indicates that the clean surface is boron terminated. The topmost boron layer shows a chemically shifted B 1s peak at 187.1 eV compared to a B 1s peak at 188.6 eV for boron layers below the surface. The 187.1-188.6 eV peak intensity ratio and its variation with angle between the crystal normal and the detector is well described by a simple theoretical model based on an independently calculated electron inelastic mean free path of 15.7 Å for TaB₂. The dissociative sticking probability of O₂ on the boron-terminated TaB₂(0 0 0 1) surface is lower by a factor of 10⁴ than for the metal-terminated HfB₂(0 0 0 1) surface.     

CoPt alloy grown on the WSe2(0 0 0 1) van der Waals surface

The structural and magnetic properties of 3-nm-thick CoPt alloys grown on WSe₂(0 0 0 1) at various temperature are investigated. Deposition at room temperature leads to the formation of a chemically disordered fcc CoPt alloy with [1 1 1] orientation. Growth at elevated temperatures induces L1₀ chemical order starting at 470 K accompanied with an increase in grain size and a change in grain morphology. As a consequence of the [1 1 1] growth direction, the CoPt grains can adopt one of the three possible variants of the L1₀ phase with tetragonal c-axis tilted from the normal to the film plane direction at 54°. The average long-range order parameter is found to be 0.35(±0.05) and does not change with the increase in the deposition temperature from 570 to 730 K. This behavior might be related to Se segregation towards the growing facets and surface disorder effects promoted by a high surface-to-volume ratio. Magnetic studies reveal a superparamagnetic behavior for the films grown at 570 and 730 K in agreement with the film morphology and degree of chemical order. The measurements at 10 K reveal the orientation of the easy axis of the magnetization lying basically in the film plane.     

Exchange bias in (1 1 0)-orientated Bi0.9La0.1FeO3/La0.5Ca0.5MnO3 films

We performed a systematic study on the exchange bias in (1 1 0)-orientated Bi_0.9La_0.1FeO₃/La_0.5Ca_0.5MnO₃ (BLFO/LCMO) heterostructure with a fixed BLFO film thickness of 600 nm and different LCMO layers ranging from t=0 to 30 nm. The LCMO is found to be weakly ferromagnetic, with the Curie temperature descending from ∼225 K to 0 as the layer thickness decreases from 30 nm to 3 nm. The main magnetic contributions come from the BLFO film, and the areal magnetization ratio is 1:0.07 for t=5 nm and 1:0.82 for t=30 nm for BLFO to LCMO at the temperature of 5 K. Further experiments show the presence of significant exchange bias, and it is, at the temperature of 10 K, ∼40 Oe for t=0 and ∼260 Oe for t=30 nm. The exchange bias reduces dramatically upon warming and disappears above the blocking temperature of the spin-glasslike behavior observed in the samples. The possible origin for exchange bias is discussed.     

Study of c(2 × 2)-MnAu(0 0 1) layers on Mn(0 0 1) by means of scanning tunneling microscopy/spectroscopy

Intermixing, growth, geometric and electronic structures of gold films grown on antiferromagnetic stacking body-centered-tetragonal manganese (0 0 1) films were studied by means of scanning tunneling microscopy/spectroscopy at room temperature in ultra-high vacuum. We found stable ordered c(2 × 2)-MnAu(0 0 1) alloy layers after depositing Au on pure Mn layers. Since at the fourth layer (5 × 23)-like Au reconstruction appears instead of the c(2 × 2) structure and local density of states peaks obtained on the c(2 × 2)-MnAu surface disappear, pure Au layers likely grow from the fourth layer.     

Morphological change of D2O layers on Ru(0 0 0 1) probed with He atom scattering

The morphological change of D₂O layers on a Ru(0 0 0 1) surface has been investigated on the basis of He atom scattering. With the increase of D₂O exposure on Ru(0 0 0 1) at 111 K, the intensity of a specularly reflected He beam continuously decreases up to the exposure of 1.0 L (Langmuir). At the D₂O coverage of 1.0 adsorbed layer (∼1.5 L), which is characterized by temperature-programmed desorption measurements, the formation of the (√3 × √3)R30° superstructure as a result of the diffusion of D₂O on the surface was confirmed by He atom diffraction. With the further increase of D₂O exposure, at 2-3 adsorbed layers, the disordered structure was found to be on the surface at 111 K. The morphological change of the disordered layers was observed during annealing, and discussed in detail.     

Thermo-stimulated surface segregation in the ordering alloy Pt80Co20(1 1 1): Experiment and modeling

In this paper, a method of Ionization Spectroscopy (IS) is proposed for the non-destructive layer-by-layer analysis of the elemental composition of a solid surface. Using ionization energy loss spectra, a layer-by-layer concentration profile of the Pt₈₀Co₂₀(1 1 1) alloy surface is obtained for different annealing temperatures. For the disordered Pt₈₀Co₂₀(1 1 1) at room temperature, the first atomic layer consists of pure Pt with damped oscillations in the deeper layers. Heating the sample reduces the oscillations. However, at a temperature of 823 K, a sandwich-like structure of the type Pt/Co/Pt was found in the first three atomic layers. For the ordered state the first atomic layer also consists of pure Pt with bulk concentration in other layers. LEED analysis shows a p(2 × 2) superstructure for the surface of the ordered Pt₈₀Co₂₀(1 1 1) alloy. The segregation behavior in this alloy is further studied by Monte Carlo (MC) simulations combined with the Constant Bond Energy (CBE) model. The results of the MC simulations agree well with the experiments at the higher temperatures, both for the surface composition and the concentration depth profile. At lower temperatures, some discrepancies exist between the MC results and the measured concentration profile.