铱金属配合物磷光材料掺杂聚合物体系的电致发光特性

通过对一种新型贵金属铱的配合物磷光材料(pbi)₂Ir(acac)与咔唑共聚物进行物理掺杂, 制备了结构为indium-tin oxide(ITO)/poly(N-vinylcarbazole)(PVK): (pbi)₂Ir(acac)(x)/2,9-dimethyl-4,7-diphenyl-1,10-phenan throline(BCP)(20nm)/8-Hydroxyquinoline aluminum(Alq₃)(10nm)/Mg:Ag的聚合物电致磷光器件,研究了磷光聚合物掺杂体系在低掺杂浓度时(0.1%和0.5%(质量百分数,全文同))的光致发光(PL)和电致发光(EL)特性. 结果表明, 该掺杂体系的PL光谱和EL光谱中均同时存在主体材料PVK与磷光客体(pbi)₂Ir(acac)的发光光谱, 但主客体的发射强度不同,推测该掺杂体系在电致发光条件下, 同时存在主体材料到客体的不完全的能量传递和载流子直接俘获过程. 磷光掺杂浓度为0.1%的器件在19V电压下实现了白光发射, 色坐标为(0.32, 0.38), 掺杂浓度为0.5%的器件在20.6V电压下的最大发光亮度为11827 cd·m^-2, 而在13.4V电压下的最大流明效率为4.13 cd·A^-1. 关键词： 有机电致发光器件 铱配合物磷光 聚合物掺杂     

Electroluminescence of organic light-emitting diodes consisting of an undoped (pbi)2Ir(acac) phosphorescent layer

The electroluminescence (EL) characteristics of phosphorescent organic light-emitting diodes (OLEDs) with an undoped bis(1,2-dipheny1-1H-benzoimidazole) iridium (acetylacetonate) [(pbi)₂Ir(acac)] emissive layer (EML) of various film thicknesses were studied. The results showed that the intensity of green light emission decreased rapidly with the increasing thickness of (pbi)₂Ir(acac), which was relevant to the triplet excimer emission. It suggested that the concentration quenching of monomer emission in the undoped (pbi)₂Ir(acac) film was mainly due to the formation of triplet excimer and partly due to the triplet-triplet annihilation (TTA) and triplet-polaron annihilation (TPA). A green OLED with a maximum luminance of 26,531 cd/m², a current efficiency of 36.2 cd/A, and a power efficiency of 32.4 lm/W was obtained, when the triplet excimer emission was eliminated. Moreover, the white OLED with low efficiency roll-off was realized due to the broadened recombination zone and reduced quenching effects in the EML when no electron blocking layer was employed.     

Study on triplet exciton diffusion length of mCP in phosphorescent organic light-emitting devices using electroluminescent spectra

Electroluminescent (EL) spectra was employed to probe the triplet exciton diffusion length (L_T) of a commonly used host material of N,N′-dicarbazolyl-3,5-benzene (mCP) in phosphorescent organic light-emitting devices (OLEDs). By varying the film thickness of bis [2-(4-tertbutylphenyl) benzothiazolato-N,C²], iridium (acetylacetonate) [(t-bt)₂Ir(acac)] phosphor doped layer within 30 nm thick mCP layer, a series of devices were fabricated to investigate the EL characteristics. The results showed that with the increasing doped layer thickness (d), both (t-bt)₂Ir(acac) emission peaks at 562 nm and mCP emission centered at 403 nm were observed. Moreover, the relationship between mCP EL intensity and d was detected. The L_T was induced by an abrupt decrease in variation of mCP EL intensity when d is increased from 10 to 15 nm, and the reason to cause this phenomenon was investigated. The L_T of mCP approximately to 15 nm was perfectly consistent to the result of 16±1 nm, which was calculated by the traditional steady-state diffusion model.     

Spectral Characteristics of White Organic Light-emitting Diodes Based on Novel Phosphorescent Sensitizer

采用新型贵金属铱的配合物bis(1,2-dipheny1-1H-benzoimida-zole)iridium (acetylacetonate)作为磷光敏化剂,与荧光染料4-(dicyanomethylene)-2-t-butyl-6-(1,1,7,7-tetramethyljulolidyl-9-en-yl)-4H-pyran共同掺杂到聚合物主体材料poly(N-vinylcarbazole)中,以N,N'-diphenyl-N,N'-bis(1-naphthyl) (1,1'-biphenyl)-4,4'-diami-ne作为蓝光发光层,制备了白色有机电致发光器件. 通过对掺杂体系的紫外-可见吸收光谱、光致发光光谱以及电致发光光谱的表征,分析了该磷光敏化体系的能量转移机制. 结果表明,在该聚合物磷光荧光双掺杂体系中,由于磷光与荧光材料之间的不完全的F?rster能量传递过程,导致电致发光光谱中同时存在磷光材料三线态到基态与荧光材料单线态到基态的辐射衰减发光. 该掺杂体系成功实现了白光发射,随着偏置电压的升高,器件的CIE色坐标有微小的红移,但都非常接近等能白光点,器件表现出了很好的色纯度.     

White organic electroluminescence from fluorescent bis (2-(2-hydroxyphenyl) benzoxazolate)zinc doped with phosphorescent material

Efficient white electroluminescence has been obtained by using an electroluminescent layer comprising of a blue fluorescent bis (2-(2-hydroxyphenyl) benzoxazolate)zinc [Zn(hpb)₂] doped with red phosphorescent bis (2-(2′-benzothienyl) pyridinato-N,C^3′)iridium(acetylacetonate) [Ir(btp)₂acac] molecules. The color coordinates of the white emission spectrum was controlled by optimizing the concentration of red dopant in the blue fluorescent emissive layer. Organic light-emitting diodes were fabricated in the configuration ITO/α-NPD/Zn(hpb)₂:0.01 wt%Ir(btp)₂acac/BCP/Alq₃/LiF/Al. The J-V-L characteristic of the device shows a turn on voltage of 5 V. The electroluminescence (EL) spectra of the device cover a wide range of visible region of the electromagnetic spectrum with three peaks around 450, 485 and 610 nm. A maximum white luminance of 3500 cd/m² with CIE coordinates of (x, y=0.34, 0.27) at 15 V has been achieved. The maximum current efficiency and power efficiency of the device was 5.2 cd/A and 1.43 lm/W respectively at 11.5 V.     

Nondoped phosphorescent organic quantum well light-emitting device based on iridium complex: Synthesis, characterization, photophysical property, and electroluminescence performance

In this paper, we report a phosphorescent Ir(III) emitter of Ir(acac)(F-BT)₂, where acac=acetylacetonate and F-BT=2-(2-fluorophenyl)benzo[d]thiazole, including its crystal structure, electronic nature, photophysical characteristics, thermal, and electrochemical properties. Data suggest that Ir(acac)(F-BT)₂ is a promising emitter with high quantum yield of 0.61 and good thermal stability, along with its proper energy levels for charge carrier transportation. Multiple quantum well (MQW) structured OLEDs using Ir(acac)(F-BT)₂ as emitter are also fabricated, and their electroluminescence (EL) are investigated in detail. The optimal EL device with 4,4′-N,N′-dicarbazole-biphenyl as potential well layer shows a maximum luminance of 85,500 cd/cm² and a peak current efficiency of 31.5 cd/A, and the efficiency roll-off is efficiently reduced.     

Efficient red organic light-emitting diode sensitized by a phosphorescent Ir compound

The efficiencies of red organic light-emitting diode (OLED) using tris-(8-hydroxy-quinoline)aluminum (Alq₃) as host and 4-(dicyanomethylene)-2-t-butyl-6-(1,1,7,7-tetramethyljulolidyl-9-enyl)-4H-pyran (DCJTB) as dopant were greatly increased by adding a small amount (0.3 wt%) of Ir compound, iridium(III) bis(3-(2-benzothiazolyl)-7-(diethylamino)-2H-1-benzopyran-2-onato-N′,C⁴) (acetyl acetonate) (Ir(C6)₂(acac)), as a sensitizer. The device has a sandwiched structure of indium tin oxide (ITO)/4,4′,4″-tris(N-(2-naphthyl)-N-phenyl-amino)triphenylamine (T-NATA) (40 nm)/N,N′-bis(1-naphthyl)-N,N′-diphenyl-1,1′-biphenyl-4,4′ diamine (NPB) (40 nm)/Alq₃:DCJTB (0.7 wt%):Ir(C6)₂(acac) (0.3 wt%) (40 nm)/Alq₃ (40 nm)/LiF (1 nm)/Al (120 nm). It can be seen that the current efficiencies of this device remained almost (13.8±1) cd/A from 0.1 to 20,000 cd/m² and the Commission International d’Eclairage (CIE) coordinates at (0.60, 0.37) in the range of wide brightness. The significant improvement was attributed to the sensitization effect of the doped Ir(C6)₂(acac), thus the energy of singlet and triplet excitons is simultaneously transferred to the DCJTB.     

不同主体双发光层白色有机电致发光器件的性能研究

制备了结构为ITO/NPB/CBP:TBPe:rubrene/BAlq:Ir(piq)₂(acac)/BAlq/Alq₃/Mg:Ag的白色磷光有机电致发光器件.利用两种不同的主体材料,即用双载流子传输型主体材料CBP掺杂荧光染料TBPe及rubrene作为蓝光和橙黄光发光层;用电子传输型主体材料BAlq掺杂磷光染料Ir(piq)₂(acac)作为红色发光层.以上双发光层夹于空穴传输层NPB与具有电子传输性的阻挡层BALq之间.讨论了如何控制 关键词： 有机电致发光 磷光染料 掺杂 白光     

A terbium (III) complex with triphenylamine-functionalized ligand for organic electroluminescent device

A novel ligand, 4-diphenylamino-benzoic acid (HDPAB), and the corresponding Tb (III) complex, Tb (DPAB)₃ which can be dissolved easily in organic solvents were synthesized and characterized. Organic electroluminescent (EL) device with a structure of indium tin oxide (ITO)/poly(N-vinylcarbazole) (PVK): Tb (DPAB)₃ (50 wt%, 80 nm)/1,3,5-tris-(N-phenylbenzimidazol-2-yl)benzene (TPBI) (30 nm)/tri(8-hydroxyquinoline)aluminum (AlQ) (20 nm)/LiF (1 nm)/Al (150 nm) in which Tb (DPAB)₃ acted as an emitter were fabricated. The maximum luminance of 230 cd m⁻² at 20 V and the maximum efficiency of 0.62 cd A⁻¹ were obtained due to the introduction of hole-transporting group, representing the best result to date among Tb (III) carboxylate complexes based EL devices. These results indicate that modifications of rare earth complexes are a promising way to improve the properties of EL devices.     

同时掺杂磷光和荧光染料的白色有机电致发光器件性能研究

以磷光染料Ir(piq)₂(acac)作为发光掺杂剂,掺入空穴传输性主体材料NPB中得到红色发光层,荧光材料TBP掺入到主体CBP中作为蓝色发光层,制备了结构为ITO/NPB/NPB：Ir(piq)₂(acac)/CBP/CBP：TBPe/BCP/ALq/Mg：Ag的双发光层白色有机电致发光器件.其中ALq₃、未掺杂的NPB和CBP及BCP层分别作为电子传输层、空穴传输层和激子阻挡层.实验中通过调节发光层厚度及Ir(piq)_{2关键词： 磷光 激子阻挡层 有机电致发光}     

Ir(Fppy)_3掺杂PVK体系发光特性的研究

对蓝色磷光材料Ir(Fppy)3不同浓度掺杂PVK薄膜的光致发光(PL)和电致发光(EL)特性进行了研究。并制备了结构为ITO/PEDOT:PSS/PVK:Ir(Fppy)3/BCP/Alq3/LiF/Al的蓝色磷光有机电致发光器件。实验结果发现,磷光材料掺杂浓度不同,器件发光特性不同。当Ir(Fppy)3掺杂浓度比较低时,EL光谱中可以观察到PVK较弱的发光;当Ir(Fppy)3掺杂浓度较高时,会发生浓度猝灭;当Ir(Fppy)3掺杂浓度比较适中时,EL光谱中观察不到PVK的发光,只有Ir(Fppy)3的发光。通过I-V-L特性的比较,当掺杂浓度为4%时,器件的光电特性最好。     

Enhancement of efficiency of multilayer polymer light-emitting diodes by inserting blocking layers

In this study, the electroluminescence efficiency of the blue-green polymer light-emitting diodes (PLEDs) is enhanced by the insertion of blocking layers. PLEDs are multilayered structures prepared with spin-coating and thermal evaporation. Blue host is doped with green guest to form a single emission layer. Poly(9-vinylcarbazole) (PVK) and 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (BCP) are used as materials for the blocking layers. The optimal thicknesses of the PVK and BCP layers are 10 and 0.2 nm, respectively. PVK plays an important role of blocking holes and electrons, and BCP not only confines holes in the emission layer but also enhances the injection of electrons from Alq₃ to the emission layer. The efficiency of a PLED with a dual-blocking layer is 2.37 times higher than that of a PLED without a blocking layer prepared because of the improved carrier balance and the enhanced carrier recombination.     

Fabrication and characterization of La-doped HfO2 gate dielectrics by metal-organic chemical vapor deposition

La-doped HfO₂ gate dielectric thin films have been deposited on Si substrates using La(acac)₃ and Hf(acac)₄ (acac = 2,4-pentanedionate) mixing sources by low-pressure metal-organic chemical vapor deposition (MOCVD). The structure, thermal stability, and electrical properties of La-doped HfO₂ films have been investigated. Inductive coupled plasma analyses confirm that the La content ranging from 1 to 5 mol% is involved in the films. The films show smaller roughness of ∼0.5 nm and improved thermal stability up to 750 °C. The La-doped HfO₂ films on Pt-coated Si and fused quartz substrates have an intrinsic dielectric constant of ∼28 at 1 MHz and a band gap of 5.6 eV, respectively. X-ray photoelectron spectroscopy analyses reveal that the interfacial layer is Hf-based silicate. The reliable value of equivalent oxide thickness (EOT) around 1.2 nm has been obtained, but with a large leakage current density of 3 A/cm² at V_g = 1V + V_fb. MOCVD-derived La-doped HfO₂ is demonstrated to be a potential high-k gate dielectric film for next generation metal oxide semiconductor field effect transistor applications.     

New heteroleptic cyclometalated iridium(III) complexes containing 2-(2′,4′-difluorophenyl)-4-methylpyridine for organic light-emitting diode applications

Two phosphorescent iridium(III) complexes (dfpmpy)₂Ir(ppc) and (dfpmpy)₂Ir(prz) [dfpmpy=2-(2′,4′-difluorophenyl)-4-methylpyridine, ppc=pipecolinate, prz=2-pyrazine carboxylate] were synthesized from the reaction of the chloro-bridged dimeric complex [(dfpmpy)₂Ir(μ-Cl)]₂ and the ancillary ligand. Their structures and photoluminescence properties were investigated and device performances for application in organic light-emitting diodes (OLEDs) were studied. The complexes adopt a distorted, octahedral geometry around the iridium metal, exhibiting cis C-C and trans N-N arrangements. The photoluminescent (PL) properties reveal that (dfpmpy)₂Ir(ppc) emits in the blue-green region (λ_max=497 nm), whereas (dfpmpy)₂Ir(prz) shows red phosphorescence (λ_max=543 nm) in the film state (5% wt. doped in PMMA). The (dfpmpy)₂Ir(ppc)- and (dfpmpy)₂Ir(prz)-based OLEDs exhibited sky-blue and greenish-yellow electroluminescence with similar current-voltage characteristics, repectively. Maximum current efficiency of (dfpmpy)₂Ir(ppc) and (dfpmpy)₂Ir(prz) were 4.4 and 7.4 cd/A, respectively. Maximum luminance values were approximately 10,000 cd/m² for the both compounds.     

Structural, optical properties and VCNR mechanisms in vacuum evaporated iodine doped ZnSe thin films

Iodine doped ZnSe thin films were prepared onto uncoated and aluminium (Al) coated glass substrates using vacuum evaporation technique under a vacuum of 3 × 10⁻⁵ Torr. The composition, structural, optical and electrical properties of the deposited films were analyzed using Rutherford backscattering spectrometry (RBS), X-ray diffraction (XRD), spectroscopic ellipsometry (SE) and study of I-V characteristics, respectively. In the RBS analysis, the composition of the deposited film is calculated as ZnSeI_0.003. The X-ray diffractograms reveals the cubic structure of the film oriented along (1 1 1) direction. The structural parameters such as crystallite size, strain and dislocation density values are calculated as 32.98 nm, 1.193 × 10⁻³ lin⁻² m⁻⁴ and 9.55 × 10¹⁴ lin/m², respectively. Spectroscopic ellipsometric (SE) measurements were also presented for the prepared iodine doped ZnSe thin films. The optical band gap value of the deposited films was calculated as 2.681 eV by using the optical transmittance measurements and the results are discussed. In the electrical studies, the deposited films exhibit the VCNR conduction mechanism. The iodine doped ZnSe films show the non-linear I-V characteristics and switching phenomena.     

Synthesis, characterization and spectroscopic investigation of new tetrakis(acetylacetonato)thulate(III) complexes containing alkaline metals as countercations

In this work a series of tetrakis complexes C[Tm(acac)₄], where C⁺=Li⁺, Na⁺ and K⁺ countercations and acac=acetylacetonate ligand, were synthesized and characterized for photoluminescence investigation. The relevant aspect is that these complexes are water-free in the first coordination sphere. The emission spectra of the tetrakis Tm³⁺-complexes present narrow bands characteristic of the ¹G₄→³H₆ (479 nm), ¹G₄→³F₄ (650 nm) and ¹G₄→³H₅ (779 nm) transitions of the Tm³⁺ ion, with the blue emission color at 479 nm as the most prominent one. The lifetime values (τ) of the emitting ¹G₄ level of the C[Tm(acac)₄] complexes were 344, 360 and 400 ns for the Li⁺, Na⁺ and K⁺ countercations, respectively, showing an increasing linear behavior versus the ionic radius of the alkaline ion. An efficient intramolecular energy transfer process from the triplet state (T) of the ligands to the emitting ¹G₄ state of the Tm³⁺ ion is observed. This fact, together with the absence of water molecules in first coordination sphere, allows these tetrakis Tm³⁺-complexes to act as efficient blue light conversion molecular devices.     

Oxygen deficiency, vacancy clustering and ionic transport in (La,Sr)CoO3 − δ

The equilibrium p(O₂)-T-δ diagrams of perovskite-type La_1 − xSr_xCoO_3 − δ (x = 0.3-0.7), collected at 873-1223 K in the oxygen partial pressure range 10^− 5-1 atm by coulometric titration and thermogravimetric analysis, were analyzed in order to appraise the effects of the point-defect interactions. The nonstoichiometry variations were adequately described combining the rigid-band approach for delocalized holes and the pair-cluster formation reaction involving oxygen vacancies and Co²⁺ cations, whilst coulombic repulsion between the positively charged vacancies can be neglected. The resultant relationships between the oxygen chemical potential and mobile vacancy concentration were used for numerical regression analysis of the steady-state oxygen permeation through dense La_1 − xSr_xCoO_3 − δ membranes, affected by the surface exchange kinetics when Sr²⁺ content is higher than 40-50%. The calculated ionic conductivity is strongly influenced by the defect association processes, and decreases with decreasing concentration of the mobile vacancies as clustering starts to prevail on reduction. The Mössbauer spectroscopy studies of La_1 − xSr_xCoO_3 − δ, doped with 1 mol% ⁵⁷Fe isotope and moderately reduced at p(O₂) ≈ 10⁻⁵ atm, show no long-range vacancy ordering at x ≤ 0.5.     

Influence of dipole moments on light-emitting features of cardo-type 1H-pyrazolo[3,4-b]quinolines

Several 1H-pyrazolo[3,4-b]quinoline derivatives were synthesized from 9,9′-di(p-aminophenyl)fluorene as possible dye chromophore for the organic light-emitting diodes. All the compounds exhibit strong fluorescence in solution and in solid state as well. The maximally achieved brightness was 65 Cd/m² and spectral range of electroluminescence (EL) covers the wavelength ranges from 420 up to 470 nm. The prepared compounds were used as dye luminophores in poly(N-vinylcarbazole) (PVK) matrix for single-layer EL light-emitting device. Principal goal of the work consists in an establishment of a possibility to operate by their light-emitting features (spectral positions of emitting lines, efficiency of electroluminescence, brightness, etc.) by appropriate changes of state dipole moments of the particular chromophore determined by semi-empirical quantum chemical calculations. The principal physical mechanism of such effects is explained within dipole-dipole interactions between the dye chromophores and PVK polymer chains.     

A novel blue-emitting Ir(III) complex with short excited state lifetime: Synthesis,structure, photophysical property,and electrophosphorescence performance

In this paper, we synthesize a triphenylamine-derived cyclometalating ligand of (4-benzothiazol-2-yl-phenyl)-diphenyl-amine (referred as BPDA) and its corresponding Ir(III) complex of (BPDA)₂Ir(acac) (acac=acetylacetone). The photophysical property, molecular structure, thermal property and electroluminescence performance of (BPDA)₂Ir(acac) are investigated in detail. It is found that (BPDA)₂Ir(acac) is an efficient emitter with high thermal stability and short excited state lifetime. The emission of (BPDA)₂Ir(acac) changes from deep blue (417 nm) to bluish green (500 nm) upon addition of different solvents. We also investigate its electrophosphorescence performance. A maximum electroluminance of 8820 cd/m² peaking at 494 nm is achieved, with the highest device efficiency of 1.72 cd/A.     

Single-layered light-emitting diodes possessing methoxy-modified pyrazoloquinoline dyes in poly-N-vinylcarbazole matrix

A principal opportunity to operate by current-voltage and electroluminescent-current dependences for the single-layered light-emitting diodes (LED) on the basis of the polyvinylcarbazole (PVK) polymers doped by methoxy-substituted pyrazoloquinoline (PQ) emitting dye chromphore is demonstrated. The principal light-emitting parameters in the architecture ITO/PQ: PVK/Ca (Al) were investigated. The maximally achieved quantum efficiency of the investigated LED was equal to about 0.87% and corresponded to the brightness about the 44 Cd/m². The absence of blue shift for the electroluminescence (EL) compared to PL may indicate on an absence of near-the-surface exciton diffusion for the methoxy-PQ contrary to the phenyl-methyl-substituted PQ. The quantum chemical calculations have shown principal role of the dye chromophore state dipole moments in the observed carrier kinetics determining the EL.