Kinetics and mechanism of the reaction betweencis-dichlorobisbipyridineruthenium(II) and nitric acid in water-methanol solutions

Summary The kinetics of the reaction betweencis-dichlorobisbipyridineruthenium(II) and nitric acid have been investigated spectrophotometrically in the 25°–40° range in the presence of 0.03 to 0.2 mol dm^–3 HNO₃. The reaction proceeds with the stepwise formation of monoaqua and diaqua products. Only the formation of the monoaqua intermediate was followed as this species could not be obtained in a pure state. Aquation proceeds through a dissociative process. The second order rate constants are 11.8 (25°), 17.5 (30°); 30.0 (35°) l mol^–1 s^–1. Activation parameters are H 52±3 kJ mol^–1; S–108±8 JK^–1 mol^–1.     

Kinetics of anation of hexaaquachromium(III) by thiocyanates – specific salt effects

The kinetics of anation of hexaaquachromium(III) by thiocyanates follows the rate law: –d[complex]/dt=k[NCS] (20–40°C, [NCS^–]=0.1–0.6M, I=2.0M, pH=1.0). The specific salt effect has been studied for five media: NaCl, NaBr, NaClO₄, KCl and CsCl. The series of chloride (Na⁺, K⁺ and Cs⁺) salts show a negligible effect on the anation rate. On the contrary, the series of sodium salts (Cl^–, Br^– and ClO ₄ ^– ) reveal a marked difference in the reaction rate. The anation rate decreases sharply with the ionic strength increase (I=0.2–2.0M, NaCl). The results were interpreted within the frame of fast equilibria of ion-pair formation followed by an interchange mechanism step. The difference of reaction rate is a result of competition between anions (thiocyanates and supporting electrolyte anions) to the complex cation at an ion-pair formation process.     

Heat capacities of aqueous perchloric acid and sodium perchlorate at 298°K: ΔC p o of ionization of water

We have used a Picker flow calorimeter for measurements leading to apparent molal heat capacities of dilute aqueous solutions of HClO₄ and NaClO₄ at 298°K. Results have been used to derive _c ^° =–27.1J-°K ^–1-mole ^–1 for HClO₄ (aq.), _c ^° =15.2J-°K ^–1-mole ^–1 for NaClO₄ (aq.), and C _p=–213.₈J-°K^–1-mole^–1 for ionization of water.     

Experimental design-based development and single laboratory validation of a capillary zone electrophoresis method for the determination of the artificial sweetener sucralose in food matrices

A capillary zone electrophoresis (CZE) method, optimised chemometrically, underwent a complete in-house validation protocol for the qualification and quantification of sucralose in various foodstuffs. Separation from matrix components was obtained in a dinitrobenzoic acid (3 mM)/sodium hydroxide (20 mM) background electrolyte with a pH of 12.1, a potential of 0.11 kV cm^–1 and a temperature of 22 °C. Detection was achieved at 238 nm by indirect UV. Screening, optimisation and robustness testing were all carried out with the aid of experimental design. Using standard addition calibration, the CZE method has been applied to still, carbonated and alcoholic beverages, yoghurts and hard-boiled candy. The method allows the detection of sucralose at >30 mg kg^–1, with a linearity range of 50–500 mg kg^–1, making it suitable for implementation of the recently amended Sweeteners for use in foodstuffs Directive (European Parliament and Council (2003) Off J L237:3–12), which set maximum usable doses of sucralose for many foodstuffs, most ranging from 200 mg kg^–1 to 450 mg kg^–1.     

The substitution kinetics of the aqua ligand by cyanide ions in [Ru(TPPS)(CO)(H2O)]4−

Summary The reaction between the title compound, ,,,-tetra(p-sulphonatophenyl)porphynatoaquacarbonylruthenate(II), [Ru(TPPS)(CO)(H₂O)]^4–, and CN^- revealed that only the aqua ligand is substituted even in the presence of a large excess of the nucleophile. The pK _a1 was spectrophotometrically determined as 13.4(5) (at 33.2 °C) and kinetically as 13.44(5) (at 33.6 °C). The rate of aqua substitution was determined as 89(4)m ^–1 s ^–1 at 35.1 °C and the activation enthalpy and entropy as 55.44(1) kJ mol^–1 and-27.90(4) J K^–1 mol^–1, respectively.     

Complex equilibria of molybdenum(V) and molybdenum(VI) witho-hydroxybenzylamine-N,N,O-triacetic acid (HBATA)

Summary Complex reactions between Mo^V.VI ando-hydroxybenzylamine-N,N,O-triacetic acid (HBATA) have been investigated in the 1–3 and 2.8–6.5 pH range by potentiometric titration at 30° C in 0.5 mol dm^–3 NaCl. The equilibrium data were analyzed with the SCOGS2 and MINIQUAD programs, taking into account side reactions of Mo^V.VI and HBATA with hydrogen ion. The favorable reaction model comprises two complexes, (1,1,1)⁺ and (1,2,2)^–, with formation constants log ₁₁₁ = 14.85 ± 0.11 and log ₁₂₂ = 28.51 ± 0.08 for the Mo^V-HBATA system and the two complexes (1,1,2)^3– and (1,1,3)^2– with formation constants log ₁₁₂ = 17.36 ± 0.01 and log ₁₁₃ = 20.60 ± 0.01 for the Mo^VI-HBATA system. The numbers in brackets refer to the chemical stoichiometric coefficients of molybdenum, HBATA and hydrogen ion in the complexes. The structure and coordinating behaviours of Mo^V and Mo^VI complexes are discussed. The equilibria studied for the polymerization of Mo^V indicates that dimeric, trimeric and tetrameric species are present at pH 1–3.     

Analogs of D(+)-pantothenic acid. V. Synthesis and investigation of the structure of N-pantoyl derivatives of proline

The synthesis of pantothenic acid analogs is described. Boiling the Na salt of L-proline (L-I) with D-(–)-pantolactone (D-II) in MeONa Yielded 53.91% of N-D-pantoyl-L-proline (III), [] _D ² ° –52° (c 2; MeOH), and 19.18% of cyclo(N-D-pantoyl-L-proline) (IV), mp 119–121°C (ethanol), [] _D ² ° –68.9° (c 2; MeOH). The following were obtained similarly: N-L-pantoyl-L-proline, cyclo(N-L-pantoyl-L-proline), N-D-pantoyl-D-proline, cyclo(N-D-pantoyl-D-proline), N-L-pantoyl-D-proline, cyclo(N-D-pantoyl-hydroxyproline), and N--hydroxybutyryl-L-proline. By fusing D-II and DL-I at 140°C cyclo(N-D-pantoyl-DL-proline) and prolylproline anhydride (V) were obtained. Compound (V) with mp 136–138°C was synthesized from DL-1 by heating at 140°C. The PMR spectra of compounds (III-V) are given. The IR spectra of compounds (III and IV) are discussed.All-Union Scientific-Research Vitamin Institute, Moscow. Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 378–383, May–June, 1979.     

UV-Visible and IR Spectroelectrochemical Properties of V2O5 Crystalline Films Charged/Discharged in Extended Potential Range

Electrochemical properties of amorphous and crystalline V₂O₅ films, dip-coated from V-oxoisopropoxide sols and thermally treated at various temperatures (100, 150, 200 and 300°C), have been studied in extended potential range, i.e. from 1.4 to –1.6 V vs. Ag/AgCl in 1M LiClO₄/propylen carbonate (PC) electrolyte. The formation of various lithiated (-, -, - and -Li _x V₂O₅) phases was correlated with the values of insertion coefficient x obtained from cyclic voltammograms (CV) of crystalline V₂O₅ films (300°C). Reversible charging was observed when films were cycled up to –1.0 V vs. Ag/AgCl, while the extension of the potential to –1.3 V vs. Ag/AgCl change the CV of films irreversibly. Charging of crystalline V₂O₅ films was followed by the help of in-situ UV-visible spectroscopy, that revealed the intensity variations of the polaron absorption above 600 nm and the presence of the absorbing V³⁺ species between 550 and 650 nm. Ex-situ IR spectra of the crystalline films charged/discharged at –1.6V/1.4V vs. Ag/AgCl confirmed the amorphisation of the films' structure.     

Photometric detection of cyclodextrins in liquid chromatography by using iodine generated electrochemically in-situ

A method has been developed for photometric detection of cyclodextrins (CD) in liquid chromatography using iodine (I₂) generated electrochemically in-situ. Iodide ion in the mobile phase was electrochemically oxidized to I₂ which was subsequently reacted with I^–, in an electrochemical flow cell, forming I₃^–. The absorbance of I₃^– was found to be greatly enhanced when CD were present in the mobile phase. The absorbance enhancement was caused by the change in the mole fraction of I₃^–, because of the inclusion reaction of I₃^– with CD. On the basis of this phenomenon, CD were detected by means of a photodiode-array UV–visible detector positioned downstream of the electrochemical flow cell. The signals were found to be linearly dependent on CD concentration. Because the formation constants of I₃^– with CD decrease in the order -CD>-CD>-CD, -CD was most detectable by the method. Detection limits were 1.0 mol L^–1 for -CD, 65 mol L^–1 for monoG1--CD, 100 mol L^–1 for -CD, and 200 mol L^–1 for -CD.     

A new method for quantitative mass-spectrometric analysis of solutions

Summary The mass-spectrometric method for the analysis of inorganic solutions is not only a very sensitive technique but also one of broad applicability. The study of the behaviour of solutions of mineral acids chilled to –70°C under a r.f. voltage from 7 to 15 kV indicated that solutions of hydrochloric acids containing 20–32% of hydrogen chloride allow to obtain stable ion currents. The equipment for the analysis of solutions on the spark source mass-spectrometer is designed and the procedure of analysis is described. The detection limits of 47 elements are in the range from 10^–7 to 10^–11 g. The accuracy of the determinations was established by the added-found method. The reproducibility is 0.1–0.34 for content levels of 10^–7–10^–9 g. The analytical possibilities of different spark source mass-spectroscopic methods for the analysis of solutions are compared.     

Development and validation of a novel HPLC/ELSD method for the direct determination of tobramycin in pharmaceuticals,plasma, and urine

A novel method for the direct determination of the aminoglycoside tobramycin was developed and validated based on reversed-phase high-performance liquid chromatography (RP-HPLC) with evaporative light scattering detector (ELSD). Using a Waters ODS-2 C18 Spherisorb column with an evaporation temperature of 45°C and nitrogen pressure of 3.5 bar, the selected mobile phase consisted of water/acetonitrile 55:45 containing 1.5 mL L^–1 HFBA (11.6 mM) in an isocratic mode at a rate of 1.0 mL min^–1. Tobramycins retention time was 4.3 min with an asymmetry factor of 1.7. A logarithmic calibration curve was obtained from 1 to 38 g mL^–1 (r > 0.9998). LOD was 0.3 g mL^–1; within-day %RSD was 1.0 (n = 3, 4.7 g mL^–1) and between-day %RSD was 1.1 (3 days within a week). The developed method was applied to the determination of tobramycin in a pharmaceutical crude substance and formulations (eye drops and ointments). Dilution experiments revealed the absence of interference from excipients (no constant and proportional errors); recovery from spiked samples was 99–103% with %RSD < 2.2 (n = 3×3). The developed HPLC/ELSD method was also found to be applicable in the determination of tobramycin in human plasma (0.6–12.5 g mL^–1) and urine (1.5–12.5 g mL^–1) after solid-phase extraction using carboxylate cartridges followed by solvent evaporation (×2 preconcentration). A mean recovery of 86% for plasma and 91% for urine was obtained.     

Dissociation constants of the ampholyte glycine in 50 mass % methanol-water from 5 to 55°C,with related thermodynamic quantities

The two thermodynamic dissociation constants of glycine at 11 temperatures from 5 to 55°C in 50 mass % methanol-water mixed solvent have been determined from precise emf measurements with hydrogen-silver bromide electrodes in cells without liquid junction. The first acidic dissociation constant (K ₁)for the process HG⁺H⁺+G^± is expressed as a function ofT(^oK) by the equation pK ₁ = 2043.5/T – 9.6504 + 0.019308T. At 25°C, pK ₁is 2.961 in the mixed solvent, as compared with 2.350 in water, with H°=1497 cal-mole^–1, G°=4038 cal-mole^–1, S°=–8.52 cal-°K^–1-mole^–1, and C _p ^o =–53 cal-°K^–1-mole^–1. The second acidic dissociation constant (K ₂)for the process G^±H⁺+G^– over the temperature range studied is given by the equation pK ₂ = 3627.1/T – 7.2371 + 0.015587T. At 25°C, pK ₂is 9.578 in MeOH–H₂O as compared with 9.780 in water, whereas H° is 10,257 cal-mole^–1, G° is 13,063 cal-mole^–1, S° is –9.41 cal-°K^–1-mole^–1, and C _p ^o is –43 cal-°K^–1-mole^–1. The protonated glycine becomes weaker in 50 mass % methanol-water, whereas the second dissociation process becomes stronger despite the lower dielectric constant of the mixed solvent (=56.3 at 25°C).     

Flavonoids of inflorescences of Calendula officinalis

By column chromatography on polyamide sorbent, the inflorescences of pot marigold calendula have yielded eight substances of flavonoid nature: two aglycons — quercetin (C₁₅H₁₀O₇, mp 309–311°C) and isorhamnetin (C₁₆H₁₂O₇, mp 314–316°C); six glycosides, of which three have been identified as isoquercetin (C₂₁H₂₀O₁₂, [] _D ²⁰ –36° in methanol, mp 218–220°C), isorhamnetin 3-O--D-glucoside (C₂₂H₂₂O₁₂, [] _D ²⁰ –59° in dimethylformamide, mp 193–195°C), narcissin (C₂₈H₃₂O₁₆, [] _D ²¹ –28° in dimethylformamide, mp 180–182°C), and three substances that have proved to be new and have been called calendoflaside (C₂₈H₃₂O₁₅, [] _D ²¹ –85° in methanol, mp 192–195°C; calendoflavoside (C₂₈H₃₂O₁₆, [] _D ²⁰ –106° in methanol, mp 189–192°C), and calendoflavobioside (c₂₇H₃₀O₁₆, [] _D ²⁰ –105° in methanol, mp 194–197°C).All-Union Scientific-Research Institute of Drug Chemistry, Khar'kov. Translated from Khimiya Prirodynkh Soedinenii, No. 6, pp. 795–801, November–December, 1988.     

Spectrophotometric and atomic absorption determination of Ni(II) in fresh and sea waters after preconcentration by flotation

A highly selective and sensitive procedure for flotation separation followed by spectrophotometric determination, confirmed by AAS, of Ni(II) traces is proposed. The maximum flotation separation (100%) is achieved at 25° C in the pH range of 1–3 using sodium diethyldithiocarbamate (as a collector) and oleic acid surfactant. The floated (1 : 2) colored complex is measured spectrophotometrically at 430 nm over a concentration range of 0.5–4.0 g/g with a molar absorptivity of 0.44 × 10⁴ L mol^–1 cm^–1. The procedure was successfully applied for the separation and determination of Ni(II) in fresh and sea waters.     

Preparation and characterization of a series of poly(acrylamide-co-acrylates), with a copolymer composition between 0–96.3 mol-% acrylate units with the same degree and distribution of polymerization

A series of linear poly(acrylamide-co-acrylates) (PAAm/AAcNa) has been prepared covering a copolymer composition between 0 and 96.3 mol% acrylate units, which have the same degrees of polymerization and chain length distributions. Measurements of viscosity and light scattering have proven that maximum coil dimensions of PAAm/ AAcNa in salt solutions are achieved at about 67 mole-% AAcNa. This so-called maximum behaviour was researched by measuring the radius of gyration, second virial coefficient, molecular weight, preferential solvation, viscosity and absorption bands of the copolymer series. Thus, an increase in the possible ways of arranging AAcNa-AAm-AAcNa units (via H-bonds) will lead to extended coil dimensions and therefore influence the viscosity. In addition, it can therefore be concluded from all these results that the maximum behaviour is real and not influenced by the different distributions of the samples. The copolymer composition can be easily determined by infra-red spectroscopy by use of a proposed relation.Abbreviations A₂ second virial coefficient (mole · cm³ · g^–2) - AAm acrylamide - AAcH acrylic acid - AAcNa sodium acrylate - c polymer concentration (g · cm^–3) - salt concentration (g · cm^–3), (Val · cm^–3) - C _LS critical concentration obtained by light scattering (g · cm^–3) - d _[] viscosity equivalent diameter of a sphere (nm) - E extinction - FW _s formula weights of salt - g _s gram of salt - g _p gram of polymer - GuaCl guanidinium chloride - h ^21/2 root mean square end-to-end distance (nm) - K optical constant for unpolarized incident light (mole · cm² · g^–2) - M molarity (mole · 1^–1) - M _w weight average molecular weight (g · mole^–1) - N _L Avogadro constant 6.023 · 10²³ mole^–1 - P _n number average degree of polymerization - P _w weight average degree of polymerization - PAAm poly(acrylamide) - PAAcH poly(acrylic acid) - PAAcNa poly(sodium acrylate) - PAAm/AAcNa poly(acrylamide-co-sodium acrylate) - R _[] Rayleigh ratio of the scattering at angle (cm^–1) - R _G ² _Z ^1/2 root mean square average radius of gyration (nm) - R _[] viscosity equivalent radius of a sphere (nm) - T temperature (°C), (K) - u excluded volume (cm³ · g^–1) - V molar volume (cm³ · mole^–1) - V _s partial specific volume - X mole fraction - (NH₂) oscillation of deformation - extinction coefficient - ₀ zero shear viscosity (Pa · s), (mPa · s) - _red reduced viscosity (cm³ · g^–1) - [] intrinsic viscosity (cm³ · g^–1) - _a constant of preferential solvation (g · g^–1) - ₀ wavelength of light in vacuo (nm) - chemical potential - v _as stretching vibration - scattering angle (°)     

Living Polymerization of Propene with Alkyltitanium-Based Catalysts

Living polymerization of propene with alkyltitanium-based catalysts is described with emphasis on the role of the activators employed. (¹ : ³-tert-Butyl(dimethylfluorenylsilyl)amido)dimethyltitanium activated by tris(pentafluorophenyl)borane (B(C₆F₅)₃) catalyzes the living polymerization at -50 °C. The use of dried methylaluminoxane (MAO) in place of B(C₆F₅)₃ raises the living polymerization temperature to 0 °C and improves the syndiospecificity. A chelating diamide dimethyltitanium activated by dried modified MAO (MMAO) catalyzes the living polymerization at 0 °C to give a statistically atactic polymer. The heterogenization of the living systems is attempted by supporting MAO, MMAO and dried MMAO on SiO₂ as solid activators.     

Electron-transfer induced change of direction of interannular haptotropic isomerization of fluorenyltricarbonylchromium anions

It has been shown by cyclic voltammetry in a THF medium in the temperature range from –70 °C to +20 °C that one-electron electrochemical reduction of (⁶-C¹³H¹⁰)Cr(CO)₃ (1) to the corresponding 19-electron anion radical (1 ^–) is accompanied by splitting off of a H atom to form the 18-electron carbon-centered anion (⁶-C₁₃H₉)Cr(CO)₃ (^–2 ), which at room temperature undergoes intramolecular haptotropic isomerization to the metal-centered (⁵-C₁₃H₉)Cr(CO)₃ ^– (^– 3) anion. The reversible one-electron reduction of3 ^– to the corresponding 19-electron radical dianion3 ^2.– induces ^{5 6} interannular isomerization. In contrast to the equilibrium shift to the ⁵-isomer in 18-electron complexes 2 and 3, in their 19-electron analogs the equilibrium is shifted to the ⁶-isomer.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 48–53, January, 1994.This work was carried out with financial support from the Russian Foundation for Basic Research (no. 93-03-5209)     

Kinetics of the periodate oxidation of octacyanomolybdate(IV) in ethanol-water solvent mixtures

The kinetics of the oxidation of Mo(CN) ₈ ^4– by IO ₄ ^– has been studied in ethanol—water solvent mixtures over a temperature range of 15–35 °C. The effect of solvent composition on the reaction rate and the mechanism has been investigated. Activation parameters are given. An inner-sphere mechanism, consistent with the kinetic results, is proposed.

---

Kinetik der Periodat-Oxidation von Octacyanomolybdat(IV) in Ethanol-Wasser

Zusammenfassung Die Kinetik der Oxidation von Mo(CN) ₈ ^4– mit IO_4/– wurde in Ethanol—Wasser über einen Temperaturbereich von 15–35 °C untersucht. Der Effekt der Lösungsmittelzusammensetzung auf die Reaktionsgeschwindigkeit und der Mechanismus der Reaktion werden diskutiert. Die Aktivierungsparameter sind angeführt. Es wird ein Inner-Sphere-Mechanismus vorgeschlagen, der mit den kinetischen Ergebnissen konsistent ist.

     

Metal ion catalysed aquation of carboxylatoamine cobalt(III) complexes. Kinetics of copper(II) catalysed aquation ofcis(diformato)bis(ethylenediamine)cobalt(III) ion

Summary The aquation ofcis-[(en)₂Co(CO₂H)₂]⁺ tocis-[(en)₂Co(OH₂)(CO₂H)]²⁺ is catalysed by Cu²⁺ and the rate equation, –d[complex]_t/dt=(k_Cu[Cu²⁺]+k_H [H⁺]) [complex)_T is valid at [Cu²⁺]_T=0.01–0.1, I=0.5 and [HClO₄]=0.005 mol dm^–3. The rate measurements are reported at 30, 35, 40 and 45°C and the rate and activation parameters for the Cu²⁺ and H⁺-catalysed paths are: k_H(35°C)=(2.44±0.09)×10^–2 dm³ mol^–1 s^–1, H=83±13 kJ mol^–1, S=–8±42 JK^–1 mol^–1, k _Cu (35°C)=(3.30±0.09)×10^–3 dm³ mol^–1 s^–1, H=73.2±6.1 kJ mol^–1, S=–55±20 JK^–1 mol^–1. The formate-bridged innersphere binuclear complex,cis-[(en)₂Co{(O₂CH)₂Cu}]³⁺ may be involved as the catalytically active intermediate in the copper(II)-catalysed path, just as the corresponding H⁺-bridged species presumed to be present in the acidcatalysed path.     

Apparent molal heat capacities and volumes of pyridine and methyl-substituted pyridines in aqueous solution at 25°C

We have made calorimetric measurements leading to apparent molal heat capacities of pyridine and four methyl-substituted pyridines in aqueous solution at 25.0°C. Measurements of densities of the same solutions have led to apparent molal volumes. The results are as follows: pyridine, _C ^° = 305.7 J–°K^–1-mole^–1 and _V ^° = 77.5 cm³-mole^–1; 2-methylpyridine, _C ^° = 370.0 J–°K^–1-mole^–1 and _V ^° = 94.3 cm³-mole^–1; 3-methylpyridine, _C ^° = 380.2 J–°K^–1-mole^–1 and _V ^° = 93.7 cm³-mole^–1; 4-methylpyridine, _C ^° = 378.9 J–°K^–1-mole^–1 and _V ^° = 94.3 cm³-mole^–1; 2,6-dimethylpyridine, _C ^° = 441.8 J–°K^–1-mole^–1 and _V ^° = 109.9 cm³-mole^–1. These _C ^° and _V ^° values are discussed in terms of effects of substitution of CH₃-for H– in the various solute molecules.The research reported here was carried out in the Department of Chemistry, University of Lethbridge, Lethbridge, Alberta, Canada T1K 3M4.