Polycyclic aromatic hydrocarbon and ionic compositions of atmospheric bulk deposition samples at a national park under the influence of intense barbecue smoke

The main aim of this study was to present the effects of barbecue smoke on a small-scale environment, a national park under the influence of intense barbecue smoke, and to scientifically support the sustainable usage of the park. Twelve-weekly bulk deposition samples were collected directly at the barbecuing area, and the samples were analysed for 16 US EPA’s priority PAH compounds and major ions. The mean concentrations of the individual PAHs in the bulk deposition samples ranged from 11.8 ng L^?1 (Ane) to 1085 ± 581 ng L^?1 (IcdP). The most frequently observed PAH compounds in the bulk deposition samples were Np, Anp, Flr, Phe, An, Flu, BkF, BaP and IcdP. The mean total PAH deposition fluxes were determined as 3.6 ± 5.6 µg m^?2 day^?1. The chloride, potassium and the sulphate fluxes were determined as 145.2 ± 267.8 µg m^?2 day^?1, 182.9 ± 291.9 µg m^?2 day^?1, and 111.9 ± 65.9 µg m^?2 day^?1, respectively. Dominant ions in the bulk deposition samples were potassium ion, chloride and sulphate which addressed as the fingerprint of barbecue grilling.     

Analysis of polycyclic aromatic hydrocarbons in atmospheric particulate samples by microwave‐assisted extraction and liquid chromatography

A methodology based on microwave‐assisted extraction (MAE) and LC with fluorescence detection (FLD) was investigated for the efficient determination of 15 polycyclic aromatic hydrocarbons (PAHs) regarded as priority pollutants by the US Environmental Protection Agency and dibenzo(a,l)pyrene in atmospheric particulate samples. PAHs were successfully extracted from real outdoor particulate matter (PM) samples with recoveries ranging from 81.4 ± 8.8 to 112.0 ± 1.1%, for all the compounds except for naphthalene (62.3 ± 18.0%) and anthracene (67.3 ± 5.7%), under the optimum MAE conditions (30.0 mL of ACN for 20 min at 110°C). No clean‐up steps were necessary prior to LC analysis. LOQs ranging from 0.0054 ng/m³ for benzo(a)anthracene to 0.089 ng/m³ for naphthalene were reached. The validated MAE methodology was applied to the determination of PAHs from a set of real world PM samples collected in Oporto (north of Portugal). The sum of particulate‐bound PAHs in outdoor PM ranged from 2.5 and 28 ng/m³.     

Determination of Atmospheric Polycyclic Aromatic Hydrocarbons Using Accelerated Solvent Extraction

Abstract

An accelerated solvent extraction (ASE) method has been developed for the determination of polycyclic aromatic hydrocarbons (PAHs) present in both atmospheric particulate and gaseous phases in this study. Extraction parameters such as the combination of solvents, extraction temperature, and static extraction time were investigated and optimized. Effective extraction was achieved using a 3:1 mixture of n-hexane and acetone as extraction solvents at 100°C in 30 min for all the compounds studied. The optimized extraction method was compared with conventional extraction methods and validated using National Institute of Standards and Technology (NIST)–certified standard reference material (SRM) 1649a. The recoveries obtained for certified 12 PAHs were in the range of 82–126% with relative standard deviation (RSD) between 6 and 28%. The validated ASE technique was used followed by gas chromatography–mass spectrometry (GC-MS) for the determination of PAHs distributed between gaseous and particulate phases in the atmosphere of Singapore. Total average concentrations of PAHs in air samples were 33.54 ± 19.32 ng m^?3, with 4.72 ± 2.80 ng m^?3 in particulate phase and 28.82 ± 16.92 ng m^?3 in gaseous phase, respectively. The results obtained from this study are compared to those reported from other areas of the world.     

Pressurised fluid extraction of polycyclic aromatic hydrocarbons and their polar oxidation products from atmospheric particles

An effective method utilising pressurised fluid extraction (PFE) to simultaneously extract polycyclic aromatic hydrocarbons (PAHs) and their polar oxidation products from atmospheric particulate matter (PM) is presented. The PFE method is advantageous over the traditional Soxhlet extraction due to its lower solvent consumption (9 mL compared to 90 mL) and shorter extraction time (15 min versus 18 h). Seventy compounds including PAHs and polar PAH oxidation products containing carbonyl (oxy-PAHs), hydroxyl (hydroxy-PAHs), and carboxylic acid (carboxy-PAHs) groups were targeted in the extraction of two different PM matrices: wood smoke (WS) and diesel exhaust (DE) PM. The PFE method was optimised and then compared to Soxhlet extraction for both PM matrices. The overall amounts of PAHs and their derivatives extracted from WS PM were slightly higher for the optimised PFE method (1849 ± 21 and 1863 ± 25 µg g^?1 with dichloromethane (DCM) and methanol (MeOH), respectively) than those obtained with Soxhlet extraction (1726 ± 33 and 1769 ± 22 µg g^?1 with DCM and MeOH, respectively). For DE PM (standard reference material (SRM) 2975) the overall amounts extracted by both methods were similar (average of 165 ± 6 µg g^?1), agreeing with previously published values. The detailed evaluation of extraction efficiencies for WS PM showed similar amounts for unfunctionalised PAHs (1100 µg g^?1) for both methods and solvents. For DE PM the mass yields for PAHs using PFE with DCM (62 ± 1 µg g^?1) were the highest and nearly 20% higher than those obtained with MeOH (53 ± 2 µg g^?1). The total mass yields of carboxy and hydroxy-PAHs from WS PM were also similar (412 ± 18 and 407 ± 11 µg g^?1) for PFE and Soxhlet with MeOH, and higher than when DCM was used (371 ± 5 and 379 ± 12 µg g^?1 for PFE and Soxhlet, respectively). For both matrices, the PFE yields for oxy-PAHs were higher than those obtained with Soxhlet.     

A review of monitoring of airborne polycyclic aromatic hydrocarbons: An African perspective

In this review, we focus on the status of the monitoring of polycyclic aromatic hydrocarbons (PAHs) in ambient air as well as in living (indoor) and working environments in Africa from 2000 to 2018. This is important as PAHs are ubiquitous in the environment and are known to be potentially carcinogenic. Aspects of sampling such as collection media for particle bound and gaseous PAHs are discussed. The efficiency and basic quality assurance data of commonly employed extraction techniques for separating target PAHs from sampling media using conventional solvent-based and emerging solvent-free approaches were also evaluated. Polyurethane foam and quartz fiber filters are generally the most commonly used collection media for gaseous and particle bound PAHs, respectively. A wide range of total PAH concentrations in ambient air has been reported across the continent of Africa, with the highest levels found at sampling sites close to high density traffic and industrial areas. A rapidly increasing population, commercial and industrial development, poor urban transportation infrastructure and the use of low quality oil products were the main causes of high total gas and particulate PAH concentrations (1.6–103 μg/m³) in West African port cities such as Cotonou, Benin. With regards to indoor environments, gas phase PAHs were detected at the highest total concentrations in rural areas ranging from 1 to 43 μg/m³ in Burundi with naphthalene being the most prevalent. Firewood burning was the major emission source in most developing countries and resulted in benzo[a]pyrene concentrations above the European permissible risk level of 1 ng/m³.     

Comparison of PAH Levels and Sources in Pine Needles from Portugal,Spain, and Greece

The main objective of this work was to assess and compare the levels, patterns, and sources of contamination of 16 polycyclic aromatic hydrocarbons (PAHs) between Portugal, Spain, and Greece (in the island of Crete). A total of 9 sampling sites were chosen (4 in urban and 5 in non-urban areas) in each country and pine needles from the Pinus pinea L. species were collected. Although the mean total PAH levels was similar in the three countries (279 ± 236 ng g^?1 for Portugal, 294 ± 258 ng g^?1 for Spain, 301 ± 253 ng g^?1 for Greece, all dry weight) and, in general, 3-ring and 4-ring PAHs were predominant (being phenanthrene consistently the most abundant), there were some visible differences in the aromatic ring patterns and possible sources between the three regions. Source apportionment was done using PAH ratios (Phen/Ant and Flt/Pyr crossplots) and reflected mixed petrogenic and pyrogenic sources. Furthermore, Principal Component Analysis (PCA) clearly separated the urban and the non-urban sites and all three countries, which reinforces that the sources of contaminations vary in each case and the suitability of pine needles for trans-boundary biomonitoring of PAHs.     

Recent trends of plutonium fallout observed in Japan: Comparison with natural lithogenic radionuclides, thorium isotopes

PM_2.5 and PM₁₀ samples were simultaneously collected monthly at a downtown site in Beijing from May 2002 to April 2003 and analyzed by instrumental neutron activation analysis (INAA) combined with organic solvent extraction method for the concentrations and distributions of extractable organohalogens (EOX), including extractable organochlorinated (EOCl), organobrominated (EOBr) and organoiodinated compounds (EOI). The concentrations of EOCl, EOBr and EOI were 10.5–79.2 ng/m³, ND-8.2 ng/m³ and 1.6–8.2 ng/m³ in PM_2.5, respectively, and 37.0–73.3 ng/m³, 1.6–12.8 ng/m³ and 1.6–8.5 ng/m³ in PM₁₀, respectively, which were increasing in the order of EOCl≫EOBr∼EOI. EOCl accounted for 73–88% and 69–91% of EOX in PM_2.5 and PM₁₀, respectively, which showed that EOCl was the major component of the organohalogens. There was a significant difference of EOCl concentrations in PM_2.5 and PM₁₀ in different seasons, which suggested that the concentrations of EOCl in the atmosphere were significantly affected by the meteorologic conditions and anthropogenic activities.     

Solid-phase extraction clean-up procedure for the analysis of PAHs in lichens

A clean-up procedure based on a solid-phase extraction column was optimized for determination of polycyclic aromatic hydrocarbons (PAHs) in lichen extracts to remove co-extracted compounds from the matrix in the final extract. Several kinds of solid phases were evaluated: normal phase (-NH₂ and alumina), strong anion exchange and reversed phase. The -NH₂ columns were the most effective by using a packed solid bed of 500?mg. The lichen raw extract was loaded on the column previously conditioned with dichloromethane and hexane. Hexane (0.5?mL) was used as rinsing solvent, and PAHs were quantitatively eluted (80–97%) using 2?mL of hexane–dichloromethane (65–35) as eluting solvent. In these conditions, even the heaviest PAHs were quantitatively eluted. The optimized SPE method provides a short time and low-solvent-consumption sample clean-up compared with other conventional methods based on column chromatography. The analytical procedure, dynamic sonication-assisted extraction, followed by the optimized solid-phase extraction clean-up, was used to determine the 16 EPA priority PAHs from native lichens collected from the Aragon valley in central Pyrenees. The PAH concentrations in lichen samples ranged from 352 to 1654?ng?g^?1, and the minimum concentration value was established as the regional reference PAH levels in the area.     

Impact of rice crop residue burning on levels of SPM,SO2 and NO2 in the ambient air of Patiala (India)

Ground-based ambient air monitoring was conducted at five different locations in and around Patiala city (29°49′–30°47′N Latitude, 75°58′–76°54′E Longitude) in Northern India in order to determine the impact of open burning of rice (Oriza sativa) crop residues on concentration levels of suspended particulate matter (SPM), sulphur dioxide (SO₂) and nitrogen dioxide (NO₂). Covering sensitive, residential, agricultural, commercial and urban areas, sampling of these pollutants was organised during August 2006 to January 2007 and August 2007 to January 2008 casing two rice crop residue burning periods (October–November) using a high volume sampling technique combined with gaseous sampling systems. Gravimetric analysis was used in the estimation of total suspended particulate matter (TSPM) whereas SO₂ and NO₂ concentration was determined using spectrophotometer (Specord205, Analytikjena). Monthly average concentrations of SPM, SO₂ and NO₂ have shown significant up and down features at all the selected sampling sites during the study period. Monthly average concentrations (24 hour) of SPM, SO₂ and NO₂ varied from 100 ± 11 µg m^?3 to 547 ± 152 µg m^?3, 5 ± 4 µg m^?3 to 55 ± 34 µg m^?3 and 9 ± 5 µg m^?3 to 91 ± 39 µg m^?3. Substantially higher concentrations were recorded at the commercial area site as compared to the other sampling sites for all the targeted air pollutants. Levels of SPM, SO₂ and NO₂ showed clear increase during the burning months (October–November) incorporated with the effect of meteorological parameters especially wind direction, precipitation and atmospheric temperature.     

Pollution characteristics of atmospheric fine particles and their secondary components in the atmosphere of Shenzhen in summer and in winter

Two field measurements for atmospheric fine particles were conducted in Baoan district of Shenzhen during the summer and winter in 2004. Totally 30 sets of 24 h samples were collected, and then the mass concentrations and chemical compositions were determined. The seasonal varia- tions and secondary pollution characteristics of fine particles during the sampling periods were dis-cussed with meteorological factors. The results show that seasonal variations of atmospheric particles are significant in Shenzhen. The average mass concentrations of PM2.5 and PM10 in summer were 35 μg·m-3 and 57 μg·m-3, respectively, and those in winter were 99 μg·m-3 and 135 μg·m-3, respec-tively. The concentrations of both PM2.5 and PM10 in winter increased 184% and 137%, respectively, compared to those in summer. PM2.5 accounted for 61% and 75% of PM10 in summer and in winter, respectively, indicating severe fine particle pollution in Shenzhen. During the summer and winter sampling periods, the mean OC/EC ratios were 3.4 and 1.6, respectively. The estimated secondary organic carbon (SOC) averagely accounted for 56% and 6% of the total OC in summer and in winter, respectively, which implies a major contribution of SOC to OC in summer. During the continuous high temperature period in summer, both the concentrations and fractions of secondary aerosol compo-nents in PM2.5 were highly elevated, suggesting severe secondary pollution again. The prevailing wind was from South China Sea in summer, and the air quality was good. The prevailing wind in winter was from Mainland China to the north, and the polluted air mass led to poor air quality.     

Polycyclic aromatic hydrocarbons in citrus fruit irrigated with fresh water under arid conditions: Concentrations,sources, and risk assessment

In Jordan, as well as in all the world countries, consumption of citrus fruits is an essential part of the daily diet, so it is important to assess the potential risk of the persistent organic pollutants such as polyaromatic hydrocarbons (PAHs) in these fruits to the human health and identify their sources in order to eliminate or reduce them. This study reports 16 priority PAHs content in four types of peeled citrus fruits grown in Jordan valley. PAHs were detected in all the studied samples in variable quantities depending on the type of citrus fruits. The results showed that the highest PAH level corresponded to acenaphthene (35.018 µg/kg) in grapefruit. Among the carcinogenic PAHs, benzo[a]anthracene (BaA) and benzo(a)pyrene (BaP) were the most representative and found in all the analyzed fruit, soil, and water samples, whereas anthracene (ANT) was not detected at all. The mean ∑16 PAHs for the different fruits were found to be 62.593 µg kg^?1 in grapefruit, 24.840 µg kg^?1 in lemon, 22.901 µg kg^?1 in mandarin, and 5.082 µg kg^?1 in orange. The dominance of naphthalene (NAP) and acenaphthene (ACE) in soil under hot climatic conditions indicates the recent and continuous input of these types in the investigated area. The bioconcentration factor (BCF) for ∑16 PAHs was observed in the order of grapefruit > lemon > mandarin > orange. Based on the results of the principal component analysis (PCA), the primary sources of PAHs in agricultural soils mainly originated from biomass burning and vehicular emissions. The incremental lifetime cancer risk (ILCR) indicated that consumption of these four citrus fruits may expose human health to potential cancer risk. The findings of this study call the policymakers and public administrations to the formulation of stringent policies and actions to control biomass burning and vehicular emissions.     

Simultaneous liquid chromatographic determination of 39 polycyclic aromatic hydrocarbons in indoor and outdoor air and application to a survey on indoor air pollution in Fuji, Japan

An analytical method was established for the simultaneous determination of 39 polycyclic aromatic hydrocarbons (PAHs) in air. The method was applied to a survey of gaseous and particulate PAHs in household indoor air. The survey was performed in 21 houses in the summer of 1999 and in 20 houses in the winter of 1999-2000 in Fuji, Japan. Thirty-eight PAHs were determined in indoor and outdoor air in the summer, and 39 PAHs were determined in indoor and outdoor air in the winter. The concentrations of gaseous PAHs in indoor air tended to be higher than those in outdoor air in the summer and winter. The concentrations of particulate PAHs in indoor air were the same as or lower than those in outdoor air in the summer and winter. PAH profiles, correlations between PAH concentrations, and multiple regression analysis were used to determine the factors affecting the indoor PAH concentrations. These results showed that gaseous PAHs in indoor air were primarily from indoor emission sources, especially during the summer, and that indoor particulate PAH concentrations were significantly influenced by outdoor air pollution.     

An ion chromatographic analysis of water-soluble,short-chain organic acids in ambient particulate matter

Recent studies have shown that the inclusion of water-soluble short-chain (WSSC) organic acids in source apportionment using positive matrix factorization (PMF) resulted in an improvement in the model's ability to resolve sources, and in understanding secondary particle formation. In the United States, numerous network samplers are operational. Quartz-fibre filters for thermal optical carbon analysis have been collected over a period of years as a part of these sampling campaigns on a routine basis. However, only a small portion of these filters are used for the carbon analysis. Thus, there is the potential to utilize these samples to enhance organic speciation for subsequent use in source apportionment. In this work, an ion-chromatographic method was developed to identify and quantify the WSSC organic acids present in fine particulate matter (PM_2.5). Samples collected to measure the concentrations of particles (PM_2.5) in south-western (Stockton) and northern (Potsdam) New York, USA from November 2002 to June 2004 were used in this study. Acetic, formic, propionic, oxalic, and malonic acids were successfully identified. The identified species accounted for 5–15% of the organic matter mass and thus enhance the knowledge of atmospheric organic-matter constituents. Oxalic acid was the most abundant species at Potsdam and Stockton with median concentrations of 17.71?ng?m^?3 and 92?ng?m^?3, respectively. Acetic and formic acids were present in Potsdam at median concentrations of 12.54?ng?m^?3 and 14.48?ng?m^?3, while at Stockton they were present at 57.58?ng?m^?3 and 51.54?ng?m^?3, respectively. The median concentration values for all acids at Stockton were higher than Potsdam. These observations are consistent with a study conducted in a semi-urban location, Schenectady, New York. At both sites, propionic and malonic acids were found in much lower concentrations when compared with the other acids. The concentration time series of various acids and seasonal variations in individual acids are discussed. The co-variance of acetic and formic acids is also outlined.     

Outdoor 222Radon concentrations monitoring in relation with particulate matter levels and possible health effects

Air quality monitoring could potentially improve exposure estimates for use in epidemiological studies. We investigated air quality by monitoring concentrations of ²²²Rn near the ground and particulate matter (PM) with an aerodynamic diameter less than or equal to 10 μm (PM10) and 2.5 μm (PM2.5) for Bucharest-Magurele periurban area. Atmospheric radon concentrations have been continuously monitored near the ground at 1 m height as well as at 10 m height. This paper presents time-series of radon concentrations monitoring in air near the ground measured during 1 January 2011–1 January 2012 by use of solid state nuclear track detectors SSNTD CR-39, exposed for 10 days periods. The daily average atmospheric radon concentration near the ground registered at 1 m height was found to be in range of 40.25 ± 7.53 Bq/m³, which was comparable with the daily average radon concentration of 44.92 ± 9.94 Bq/m³ recorded for period 1 August 2011–20 December 2011 at 10 m height by AlphaGUARD Radon monitor. Also, was done a comparative analysis of spatio-temporal variations in time series of outdoor radon concentration and PM in two size fractions (PM10 and PM2.5) in Bucharest Magurele area for 2011 year. The predominant recorded component in PM10 was PM2.5. Observational results show that recorded yearly average PM2.5 and PM10 concentrations were 35.96 μg/m³ and 40.91 μg/m³, respectively. The average ratio of PM2.5/PM10 was 87.9 % at this sampling site. However, in densely populated Bucharest urban and suburban areas the mean daily EC limit values for PM10, PM2.5 and attached ²²²Rn are frequently exceeded leading to serious public concern during the last years. The ambient air pollution measurements like as PM10 and PM2.5 levels are used as a proxy for personal exposure levels. Have been investigated also meteorological effects on the temporal patterns of atmospheric radon and particle matter.     

Ground level ozone (O3) associated with radon (222Rn) and particulate matter (PM) concentrations in Bucharest metropolitan area and adverse health effects

The aim of this paper is to contribute with new information in the application of ground based radon (²²²Rn) observations to atmospheric research, namely its relation with air pollution due to ground-level ozone (O₃) and particle matter in two size fractions (PM10 and PM2.5) for Bucharest metropolitan area in Romania. During January 1–December 31, 2011, ground levels of radon, ozone and particulate matter (PM) have been continuously monitored in synergy with the main meteorological parameters (air temperature, humidity and pressure), and daily global air quality indices. A systematic analysis of surface ozone observations of ground level radon, ozone and PM is presented. Observational results indicate the following yearly daily mean ground level concentrations: 40.26 ± 7.54 Bq/m³ for radon, 90.51 μg/m³ for ozone, 35.96 μg/m³ for PM2.5, and 40.91 μg/m³ for PM10. The assessment of the results showed the influence of local and meteorological conditions on the daily mean radon, ozone and PM concentrations. However, in densely populated metropolitan area of Bucharest the mean daily values of ozone, PM2.5, PM10, and attached ²²²Rn are sometimes higher than European Community limit values leading to serious public concern during the last years. Due to the high risk of increased levels of O₃, PM2.5, PM10, and attached ²²²Rn on human health respiratory function (especially for children and older persons), and urban green, the results are very useful for atmospheric, radiological protection, epidemiological and environmental studies.     

Evaluation of 222Rn and 226Ra concentrations in cement and limestone of Sheikh Buddin Hill,Pezu, Pakistan using different techniques

Lucky Cement Factory, Pezu is using limestone of Sheikh Buddin Hills as a raw material in cement. Workers of the factory have direct and general public have indirect exposure to radiological hazard due to natural radionuclides present in limestone. To address the radiological hazards, limestone, mixed (limestone+clay) and cement samples were evaluate for concentrations of ²²²Rn and ²²⁶Ra using CR-39, RAD7 and HPGe detectors. Maximum mean values of ²²²Rn using CR-39 and RAD7 detectors were found 1447 ± 198 and 1416 ± 74 Bq.m^?3 in cement samples and minimum were found in 536 ± 122 and 525 ± 45 Bq.m^?3 limestone samples, respectively. Maximum mean value of radon exhalation rate of 12.28 ± 1.68 Bq.m^?2 h^?1 in cement samples was found below the world average value of 57.6 Bq.m^?2 h^?1. Maximum mean values of ²²⁶Ra measured by CR-39 and HPGe detectors were found 24.25 ± 3.35 and 23.6 ± 0.70 Bq.kg^?1 in cement samples and minimum were found in 8.98 ± 2.02 and 9.19 ± 0.40 Bq.kg^?1 limestone samples, respectively. A positive correlations (R² = 0.9714) using CR-39 and RAD7 detectors and (R² = 0.9573) using CR-39 and HPGe detectors were obtained for the concentrations of ²²²Rn and ²²⁶Ra, respectively. Maximum mean value of annual effective dose of 347.78 ± 47.58 µSv.y^?1 in cement samples was found below the world average value of 1100 µSv.y^?1.     

Investigation of radon and thoron concentrations in a landmark skyscraper in Tokyo

The temporal variation of the radon concentration, and the radon and thoron concentrations every 3 months for a year were measured using two types of devices in a landmark skyscraper, the Tokyo Metropolitan Government Daiichi Building. In the measurement of temporal variation of the radon concentration using a pulse type ionization chamber, the average radon concentration was 21 ± 13 Bq m^?3 (2–68 Bq m^?3). The measured indoor radon concentration had a strong relationship with the operation of the mechanical ventilation system and the activities of the office workers. The radon concentration also increased together with temperature. Other environmental parameters, such as air pressure and relative humidity, were not related to the radon concentration. In the long-term measurements using a passive radon and thoron discriminative monitor, no seasonal variation was observed. The annual average concentrations of radon and thoron were 16 ± 8 and 16 ± 7 Bq m^?3, respectively. There was also no relationship between the two concentrations. The annual average effective dose for office workers in this skyscraper was estimated to be 0.08 mSv y^?1 for 2000 working hours per year. When considering the indoor radon exposure received from their residential dwellings using the annual mean radon concentration indoors in Japan (15.5 Bq m^?3), the annual average effective dose was estimated to be 0.37 mSv y^?1. This value was 31 % of the worldwide average annual effective dose.     

Dibenzopyrenes,other PAHs with molecular weight 302, and selected carcinogenic PAHs seldom determined: identification and one-year quantification in urban air

The unambiguous identification in environmental samples of the potent carcinogen dibenzo[a,l]pyrene (DBalP) and the other DBPs (DBaeP, DBaiP, DBahP), whose evidence of carcinogenicity was recently re-evaluated by the International Agency for Research on Cancer (IARC), is an analytical challenge. This is attributed to their low concentrations in the environment and to the co-presence of several 302?MW isomers. In this study the four DBPs were identified in air, together with further four isomers with MW 302, based on an overall evaluation of five acceptance criteria. Their annual mean concentrations were quantified, for the first time to our knowledge. Thirteen other isomers were tentatively identified by comparison with previously published gas chromatographic profiles. The determinations were performed on PM10 samples collected every sixth day at a site in Rome, solvent extracted and analysed using GC/LRMS. The primary objective was to determine the mean DBP concentrations the population may be exposed to, and their consequent carcinogenic risks relative to benzo[a]pyrene (BaP) taken as a reference polycyclic aromatic hydrocarbon (PAH). The mean concentrations of DBalP, DBaeP, DBaiP and DBahP were, respectively, 0.014, 0.07, 0.02 and 0.01?ng?m^?3 (BaP: 0.65?ng?m^?3). Based on the available toxicity equivalence factors, DBalP contributed the carcinogenic risk of the PAH mixture by a factor of 2 relative to the risk attributable to BaP. DBaeP, DBahP and DBaiP contributed by, respectively, 11%, 1% and 0.3% of BaP. The instrumental conditions used to determine the 302?MW isomers allowed to unambiguously identify and to quantify other PAHs, ‘possibly carcinogenic’ to humans according to IARC, whose atmospheric concentrations reported in literature are scarce or missing: benzo[c]phenanthrene, 5-methylchrysene and benzo[j]fluoranthene (the latter being baseline resolved from isomers b and k). Finally, for completeness of information on PAHs recently upgraded by IARC to ‘possibly carcinogenic’, the concentrations of cyclopenta[cd]pyrene are reported.     

A new approach for determination of crustal and trace elements in airborne particulate matter

An ICP-OES procedure was developed for fast and accurate determination of various crustal (Al, Ca, Fe, Mg, Si) and trace elements (Ba, Cu, Mn, Na, K, Sr, Ti, Zn) in airborne particulate matter. The method is based on a preliminary treatment of the aerosol samples with a mixture of nitric acid and hydrogen peroxide at elevated temperature leading to a mineralization of the organic sampling substrate, dissolution of soluble material and homogeneous suspension of the remaining non-soluble fraction. After dilution the derived slurry solutions were measured using ICP-OES. The reproducibility of analysis given as the relative standard deviation (% RSD) varied between 3.2 and 6.8% for bulk constituents such as Al, Ca, Fe, Mg and Si whereas values ranging from 3.5 to 9.1% were obtained for trace metals present with distinctly lower abundance in PM10 (e.g. Ba, Cu, Mn, Sr, Zn). The limits of detection (LOD) calculated as three times the standard deviation (3σ) of the signal derived from filter blank samples ranged from approximately 1?ng?m^?3 (Sr) to 71?ng?m^?3(Ca). The developed procedure was evaluated by comparing the obtained results with the findings derived for the same set of aerosol samples analyzed using a microwave procedure for sample dissolution with subsequent ICP-OES analysis. Finally the developed procedure was applied for the analysis of crustal and trace elements in PM10 samples collected at an urban site (Getreidemarkt, Vienna) and a rural site (Hartberg, Styria), in Austria. The concentrations of the investigated crustal elements varied between some hundred ng?m^?3 and few µg?m^?3 with highest concentrations for Fe and Si, distinctly reduced concentrations ranging from some ng?m^?3 (Sr) to more than hundred ng?m^?3 (K) were found for trace elements. Observed PM10 concentrations were found to be in accordance to literature findings from urban sites in central Europe.     

Behaviour of polycyclic aromatic hydrocarbons in dissolved,colloidal, and particulate phases in sedimentary cores

Solid-phase microextraction (SPME) has been successfully used for extracting polycyclic aromatic hydrocarbons (PAHs) from porewater samples from the Mersey Estuary, UK. The majority of the PAHs in porewater samples are associated with colloids due to the high DOC concentrations. The truly dissolved PAH concentrations varied from 66 to 1050?ng?L^?1 in core 2 and from 95 to 740?ng?L^?1 in core 3, and were dominated by naphthalene, fluoranthene, and pyrene. Although absent in the dissolved phase, the high-molecular-mass compounds were found in the colloid-associated fraction of porewater. PAHs in sediments arose from a range of compounds with 4- and 5-ring PAHs dominating. The partitioning of PAHs between sediment and porewater shows that PAHs are enriched in the sediment phase. When the soot carbon content was considered, predictions of the partition behaviour were found to agree more closely with the observed distribution. The results reiterate the importance of evaluating the speciation of organic pollutants in both porewater and sediments in order to accurately predict their environmental fate and potential toxicity.