Determination of pK a of benzoic acid- and p-aminobenzoic acid-modified platinum surfaces by electrochemical and contact angle measurements

Acidity constant values of benzoic acid (BA)-modified platinum electrode (Pt-BA) and p-aminobenzoic acid (pABA)-modified platinum electrode (Pt-NHBA) surfaces were determined using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and contact angle measurements (CAM). Diazonium tetrafluoroborate salt reduction and pABA oxidation reactions were used to prepare (Pt-BA) and (Pt-NHBA) surfaces, respectively. Both surfaces exhibited pH dependence with [Fe(CN)₆]^3?/4? redox probe solutions at different pH; this allowed us to estimate the surface pK _a values. Acidity constants for Pt-BA surface were found to be pK _a (3.09 ± 0.25), (4.89 ± 0.11), and (3.91 ± 0.54) by CV, EIS, and CAM techniques, respectively, while the values for Pt-NHBA surface were pK _a (3.16 ± 0.45), (4.24 ± 0.40), and (5.64 ± 0.12). The Pt-BA surface pK _a values were lower in CV and CAM measurements relative to the bulk solution of BA, while a higher value was observed in EIS for Pt-BA surface. The pK _a values determined for Pt-NHBA surface via both CV and EIS were lower than the bulk value; however, the result obtained from CAM was one unit higher than pK _a of bulk pABA.     

Electrochemical Investigation of Cytochrome c Immobilized onto Self‐Assembled Monolayer of Captopril

The electrochemical behavior of cytochrome c (cyt‐c) that was electrostatically immobilized onto a self‐assembled monolayer (SAM) of captopril (capt) on a gold electrode has been investigated. Cyclic voltammetry, scanning electrochemical microscopy (SECM) and electrochemical impedance spectroscopy were employed to evaluate the blocking property of the capt SAM. SECM was used to measure the bimolecular electron transfer (ET) kinetics (k_BI) between a solution‐based redox probe and the immobilized protein. In addition, the tunneling ET between the immobilized protein and the underlying gold electrode was calculated. A k_BI value of (5.0±0.6)×10⁸ mol^?1 cm³ s^?1 for the bimolecular ET and a standard tunneling rate constant (k⁰) of 46.4±0.2 s^?1 for the tunneling ET have been obtained.     

Copper hexacyanoferrate multilayer films on glassy carbon electrode modified with 4-aminobenzoic acid in aqueous solution

4-Aminobenzoic acid (4-ABA) was covalently grafted on a glassy carbon electrode (GCE) by amine cation radical formation during the electrooxidation process in 0.1 M KCl aqueous solution. X-ray photoelectron spectroscopy (XPS) measurement proves the presence of 4-carboxylphenylamine on the GCE. Electron transfer processes of Fe(CN)₆³⁻ in solutions of various pHs at the modified electrode are studied by both cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Changing the solution pH would result in the variation of the terminal group's charge state, based on which the surface pK_a values were estimated. The copper hexacyanoferrate (CuHCF) multilayer films were formed on 4-ABA/GCE prepared in aqueous solution, and which exhibit good electrochemical behavior with high stability.     

Direct Electrochemistry of Cytochrome c at Modified Si(100) Electrodes

This paper demonstrates the direct electron transfer between the heme moiety of horse hearth cytochrome c and a pyridinyl group on self‐assembled‐monolayer‐modified Si(100) electrodes. Self‐assembled monolayers (SAMs) containing the putative receptor ligand were prepared by a step‐wise procedure using “click” reactions of acetylene‐terminated alkyl monolayers and isonicotinic acid azide derivatives. Unoxidized Si(100) electrodes, possessing either isonicotinate or isonicotinamide receptor ligands, were characterized using X‐ray photoelectron spectroscopy, contact‐angle goniometry, cyclic voltammetry, and electrochemical impedance spectroscopy. The ability of isonicotinic acid terminated layers to coordinatively bind the redox center of cytochrome c was found to be restricted to pyridinyl assemblies with a para‐ester linkage present. The protocol detailed here offers an experimentally simple modular approach to producing chemically well‐defined SAMs on silicon surfaces for direct electrochemistry of a well‐studied model redox protein.     

Interference from Trace Copper in Electrochemical Investigations Employing Carboxylic Acid Terminated Thiol Modified Gold Electrodes

Unexpectedly, electrochemistry at variable chain length carboxylic acid terminated alkylthiol self‐assembled monolayers (SAMs) on gold electrodes gives rise to a Faradaic process in buffered aqueous electrolyte solution. In particular, the three‐carbon chain length, 3‐mercaptopropionic acid (MPA), exhibits a chemically reversible process with a mid‐point potential of 175 mV vs. Ag/AgCl under conditions of cyclic voltammetry. This process is associated with the presence of trace (parts per billion) amounts of copper(II) ions present in the chemical reagents used to prepare the aqueous electrolyte and also from the gold electrode itself. The carboxylic acid moiety on the SAM concentrates Cu²⁺ ions by coordination and this surface confined layer is then reduced. Methods to minimize the interference of Cu²⁺ ions at carboxylic acid terminated SAM are discussed and caution with respect to the interpretation of protein electrochemistry is recommended when using carboxylic acid functionalized SAMs to provide biocompatible electrochemical transduction surfaces, unless a metal free environment can be obtained.     

Ester Hydrolysis by a Cyclodextrin Dimer Catalyst with a Tridentate N,N′,N′′‐Zinc Linking Group

A new β‐cyclodextrin dimer, 2,6‐dimethylpyridine‐bridged‐bis(6‐monoammonio‐β‐cyclodextrin) (pyridyl BisCD, L), is synthesized. Its zinc complex (ZnL) is prepared, characterized, and applied as a catalyst for diester hydrolysis. The formation constant (log K_ML=7.31±0.04) of the complex and deprotonation constant (pK_a1=8.14±0.03, pK_a2=9.24±0.01) of the coordinated water molecule were determined by a potentiometric pH titration at (25±0.1)°C, indicating a tridentate N,N′,N′′‐zinc coordination. Hydrolysis kinetics of carboxylic acid esters were determined with bis(4‐nitrophenyl)carbonate (BNPC) and 4‐nitrophenyl acetate (NA) as the substrates. The resulting hydrolysis rate constants show that ZnL has a very high rate of catalysis for BNPC hydrolysis, yielding an 8.98×10³‐fold rate enhancement over uncatalyzed hydrolysis at pH 7.00, compared to only a 71.76‐fold rate enhancement for NA hydrolysis. Hydrolysis kinetics of phosphate esters catalyzed by ZnL are also investigated using bis(4‐nitrophenyl)phosphate (BNPP) and disodium 4‐nitrophenyl phosphate (NPP) as the substrates. The initial first‐order rate constant of catalytic hydrolysis for BNPP was 1.29×10^?7 s^?1 at pH 8.5, 35 °C and 0.1 mM catalyst concentration, about 1600‐fold acceleration over uncatalyzed hydrolysis. The pH dependence of the BNPP cleavage in aqueous buffer was shown as a sigmoidal curve with an inflection point around pH 8.25, which is nearly identical to the pK_a value of the catalyst from the potentiometric titration. The k_BNPP of BNPP hydrolysis promoted by ZnL is found to be 1.68×10^?3 M ^?1 s^?1, higher than that of NPP, and comparatively higher than those promoted by its other tridentate N,N′,N′′‐zinc analogues.     

Electrochemical Study of Schiff Bases by Means of Self‐Assembled Monolayers

In this paper, Schiffbases were investigated using cyclic voltammetry (CV) and impedance electrochemical spectroscopy (EIS) techniques by means of self‐assembled monolayers for the first time, where a 0.1 M KCl solution and the redox couple of Fe(CN)₆^3?/Fe(CN)₆^4?were used as the electrolyte and probing‐pin, respectively. The monolayers formed by the employed Schiff base were proved to be relatively stable, and its electrochemical response in the studied system with different pH values was also de scribed clearly with CV and EIS plots. The results show that the monolayer of Schiff bases could exist in the solution with pH value from 2 to 10. In the EIS measurement in the concentration range from 10^?5 M to 5× 10^?4 M, a nearly linear relation ship between the charge transfer resistance (R_ct) and the logarithm concentration of Cu²+was observed, suggesting that Cu²+ could be titrated with the EIS method quasi‐quantitatively. The phenomenon agreed with the former report very well. Using the self‐assembled monolayers to study Schiff bases with the electrochemical method is the major contribution of our work.     

Density functional theoretical study of pKa of RCOOH (RH,CH3, and C2H5) using the combination of the extended clusters‐continuum model

The accurate pK_a determinations for three carboxylic acids have been investigated using the combination of the extended clusters‐continuum model at B3LYP/6‐31+g(d,p) and B3LYP/6‐311++g(d,p) levels. To take into account of the effect of the water combined with carboxylic acids in different positions, eleven molecular clusters were considered. Among these clusters, the one involving the carboxylic acid wrapped up with water molecules and saturated with hydrogen bonds (four hydrogen bonds around ? COOH) leads to the best B3LYP pK_a results compared to the experimental data. For those clusters saturated with hydrogen bonds, when n = 3 (the number of water molecules), the average absolute errors between the calculated pK_a results and experimental data of these three carboxylic acids were 0.19 (0.23) and 0.12 (0.22) pK_a at B3LYP/6‐31+g(d,p)//PCM (IEFPCM) and B3LYP/6‐311++g(d,p)//PCM (IEFPCM) levels, respectively; when n = 4, they are 0.53 (1.23) and 1.09 (1.03) pK_a, respectively. On the basis of the above results, the molecular cluster saturated with four hydrogen bonds formed by three waters and one carboxylic acid molecule was the chief existence in the carboxylic acid solution. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

Electrochemical DNA impedance biosensor for the detection of DNA hybridization with polymeric film, single walled carbon nanotubes modified glassy carbon electrode

In this work, we report the fabrication of a sensitive electrochemical DNA impedance biosensor for the detection of sequence-specific target DNA. p-Aminobenzoic acid was first immobilized on the surface of the electrode modified with single walled carbon nanotubes with carboxylic acid groups (SWCNTs) by cyclic voltammetry (CV). A single-stranded DNA probe with a NH₂ group at the end (H₂N-ssDNA) was then covalently immobilized on the surface of polymeric film at room temperature. The impedance measurement was performed in a solution containing 5 mM K₃[Fe(CN)₆]/K₄[Fe(CN)₆]. The change of interfacial charge transfer resistance (R _CT) was confirmed the hybrid formation. The difference of R _CT was linear with the logarithm of complementary oligonucleotides concentrations in the range of 1.0 × 10^?12 to 1.0 × 10^?7 M, with a detection limit of 3.5 × 10^?13 M (S/N = 3).     

Electrochemical Behavior of Chloranil Chemically Modified Carbon Paste Electrode. Application to the Electrocatalytic Determination of Ascorbic Acid

A p‐chloranil modified carbon paste electrode was constructed and the electrochemical behavior of this electrode was studied in the aqueous solution with different pH. From the E_1/2–pH diagram for this compound the values of formal potential E^0' and pK_a of some different redox and acid‐base couples depending on the solution pH were estimated. The diffusion coefficient, D, value for p‐chloranil was estimated 1.5×10^?7 cm² s^?1. It has been shown by direct current cyclic voltammetry and double potential step chronoamperometry, that this p‐chloranil incorporated carbon paste electrode, can catalyze the oxidation of ascorbic acid in the aqueous buffered solution. Under the optimum condition (pH 7.00), the oxidation of ascorbic acid at the surface of such an electrode occurs at a potential about 325 mV less positive than that at an unmodified carbon past electrode. The catalytic oxidation peak currents was linearly dependent on the ascorbic acid concentration and a linear calibration curve was obtained in the range of 7×10^?5 M–4×10^?3 M of ascorbic acid with a correlation coefficient of 0.9998. The limit of detection (3σ) was determined as 3.5×10 ^?5 M. This method was used as simple, selective and precise voltammetric method for determination of ascorbic acid in pharmaceutical preparations.     

High‐Quality Covalently Grafting Hemoglobin on Gold Electrodes: Characterization,Redox Thermodynamics and Bio‐electrocatalysis

Herein, we report a versatile surface chemistry methodology to covalently immobilize ligands and proteins to self‐assembled monolayers (SAMs) on gold electrode. The strategy is based on two steps: 1) the coupling of soluble azido‐PEG‐amimo ligand with an alkynyl‐terminated monolayer via click reaction and 2) covalent immobilization hemoglobin (Hb) to the amine‐terminated ligand via carbodiimide reaction. Surface‐enhanced Raman scattering spectroscopy (SERS), atomic force microscopy (AFM), reflection absorption infrared spectroscopy (RAIR) and cyclic voltammetry are used to characterize the model interfacial reactions. We also demonstrate the excellent biocompatibility of the interface for Hb immobilization and reliable application of the proposed method for H₂O₂ biosensing. Moreover, the redox thermodynamics of the Fe³⁺/Fe²⁺ couple in Hb is also investigated.     

Indigo Carmine as New Label in PNA Biosensor for Detection of Short Sequence of p53 Tumor Suppressor Gene

A new electrochemical PNA hybridization biosensor for detection of a 15‐mer sequence unique to p53 using indigo carmine (IC) as an electrochemical detector is described in this work. This genosensor is based on the hybridization of target oligonucleotide with its complementary probe immobilized on the gold electrode by self‐assembled monolayer formation. Because this label is electroactive in acidic medium, the interaction between IC and short sequence of p53 is studied by differential pulse voltammety (DPV) in 0.1 M H₂SO₄. The results of electrochemical impedance spectroscopy and cyclic voltammetry in the solution of [Fe(CN)₆]^3?/4? shows no breakage in PNA‐DNA duplex. A decrease in the voltammetric peak currents of IC is observed upon hybridization of the probe with the target DNA. The influence of probe concentration on effective discrimination against non‐complementary oligonucleotides is investigated and a concentration of 10^?7 M is selected. The diagnostic performance of the PNA sensor is described and the detection limit is found to be 4.31×10^?12 M.     

Paste Electrode Based on Short Single‐Walled Carbon Nanotubes and Room Temperature Ionic Liquid: Preparation,Characterization and Application in DNA Detection

A paste electrode (SWNT&RTIL PE) has been prepared using carboxylic group‐functionalized short single‐walled carbon nanotubes (SWNTs) mixed with 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMIMPF₆, one kind of room temperature ionic liquid, RTIL). Its electrochemical behavior was investigated by cyclic voltammetry and electrochemical impedance spectroscopy in comparison with the paste electrode using mineral oil as a binder. Results highlighted the advantages of the paste electrode: not only higher conductivity, but also lower potential separation (ΔE_p), higher peak current (i_p) and better reversibility towards dopamine (DA), methylene blue (MB) and K₃[Fe(CN)₆]. The SWNT&RTIL PE could be used to detect the number of guanine bases and adenine bases contents in per mol oligonucleotides according to the current response in the range of 0.05–2.0 nM. Based on the current response of guanine bases, oligonucleotides could be detected sensitively in the B–R buffer solution with a detection limit of 9.9 pM. The heterogeneous electron transfer rate constant (k_s) of guanine bases contents in the oligonucleotides was investigated and its value was 0.90 s^?1. In essence the SWNT&RTIL PE showed high sensitivity, reliability, stability and reproducibility for the detection of DNA.     

OH functionalized Multi-Walled Carbon Nanotube modified electrode as electrochemical sensor for the detection of Aceclofenac

ABSTRACT

The rapid electrochemical determination of Aceclofenac (ACF) has been employed by cyclic voltammetry (CV), differential pulse voltammetry (DPV) using developed OH-functionalised multiwalled carbon nanotube carbon paste electrode (OH-MWCNT/CPE). Modified electrode was characterised by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDAX), X-ray diffraction spectroscopy (XRD), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The ACF exhibits two oxidation peaks at +0.4 V, +0.66 V and one reduction peak at +0.3 V. The active surface area of the bare carbon paste electrode (BCPE) and modified electrode have been characterised by using K₃[Fe(CN)₆] solution containing 0.1 M KCl. In DPV mode, variation of ACF gave the limit of detection (LOD = 3s/m) 0.246 μM over the concentration range 1.0 to 190.0 μM (R² = 0.9994). The developed electrode has good stability, reproducibility and could be successfully validated for the detection of ACF in pharmaceutical samples and biological fluids.     

Thermodynamic Estimate of pKa Values of the Carboxylic Acids in Aqueous Solution with the Density Functional Theory

The 96 pK_a values of 85 carboxylic acids in aqueous solution were calculated with the density functional theory method at the level of B3LYP/6‐31+G(d,p) and the polarizable continuum model (PCM) was used to describe the solvent. In the calculations of pK_a values, the dissociation Gibbs free energies were directly calculated using carboxylic acid dissociation reactions in aqueous solution, i. e., no thermodynamic cycle was employed, which is different from the previous literatures. A highly significant correlation of R²=0.95 with a standard deviation (SD) of 0.36 between the experimental pK_a values and the calculated dissociation Gibbs free energies [ΔG(calc.)] was found. The slope of pK_a vs. (G(calc.)/(20303RT) is only 47.6% of the theoretically expected value, which implies that the ΔG(calc.) value from the theoretical calculation is larger than the actual one for all 85 carboxylic acids studied. Thus, by adding the 0.476 scaling‐factor into the slope, we can derive a reliably procedure that can reproduce the experimental pK_a values of carboxylic acids. The pK_a values furnished by this procedure are in good agreement with the experimental results for carboxylic acids in aqueous solution.     

The salt–cocrystal spectrum in salicylic acid–adenine: the influence of crystal structure on proton‐transfer balance

At one extreme of the proton‐transfer spectrum in cocrystals, proton transfer is absent, whilst at the opposite extreme, in salts, the proton‐transfer process is complete. However, for acid–base pairs with a small ΔpK_a (pK_a of base ? pK_a of acid), prediction of the extent of proton transfer is not possible as there is a continuum between the salt and cocrystal ends. In this context, we attempt to illustrate that in these systems, in addition to ΔpK_a, the crystalline environment could change the extent of proton transfer. To this end, two compounds of salicylic acid (SaH) and adenine (Ad) have been prepared. Despite the same small ΔpK_a value (≈1.2), different ionization states are found. Both crystals, namely adeninium salicylate monohydrate, C₅H₆N₅⁺·C₇H₅O₃^?·H₂O, I , and adeninium salicylate–adenine–salicylic acid–water (1/2/1/2), C₅H₆N₅⁺·C₇H₅O₃^?·2C₅H₅N₅·C₇H₆O₃·2H₂O, II , have been characterized by single‐crystal X‐ray diffraction, IR spectroscopy and elemental analysis (C, H and N) techniques. In addition, the intermolecular hydrogen‐bonding interactions of compounds I and II have been investigated and quantified in detail on the basis of Hirshfeld surface analysis and fingerprint plots. Throughout the study, we use crystal engineering, which is based on modifications of the intermolecular interactions, thus offering a more comprehensive screening of the salt–cocrystal continuum in comparison with pure pK_a analysis.     

Development of Electrochemical Impedance Spectroscopy Based Malaria Aptasensor Using HRP‐II as Target Biomarker

Current demand for a stable, low cost and sensitive malaria sensor has prompted to explore novel recognition systems that can substitute widely used protein based labile biorecognition elements to be used in point of care diagnostic devices. Here, we report a novel ssDNA aptamer of 90 mer sequence developed by SELEX process against HRP‐II, a specific biomarker for Plasmodium falciparum strains. High stability of the secondary structure of the isolated aptamer was discerned from its free energy of folding of −20.40 kcal mole⁻¹. The binding constant (K_d) of the aptamer with HRP‐II analysed by isothermal titration calorimetry was ∼1.32 μM. Circular dichroism studies indicated B form of the aptamer DNA. The aptamer was chemically immobilized on a gold electrode surface through a self‐assembled monolayer of dithio‐bis(succinimidyl) propionate to produce the aptasensor. The step wise modification of the layers over the gold electrode during fabrication of the aptasensor was confirmed by cyclic voltammetry. The aptasensor was then challenged with different concentration of HRP‐II and analysed the interaction signals through electrochemical impedance spectroscopy. The impedance signal behaved reciprocally with the increasing concentrations of the target in the sample from which a dynamic range of 1 pM–500 pM (R²=0.99) and LOD of ∼3.15 pM were discerned. The applicability of the developed aptasensor to detect HRP‐II in mimicked real sample was also validated.     

Interference‐Free Electrochemical Detection of Nanomolar Dopamine Using Doped Polypyrrole and Silver Nanoparticles

This paper presents a new approach to detect dopamine in nanomolar range using an electrochemical sensor utilizing a composite made of chitosan‐stabilized silver nanoparticles and p‐toluene sulfonic acid‐doped ultrathin polypyrrole film. Studies included cyclic voltammogram, amperometry, differential pulse voltammetry and also investigation by electrochemical impedance spectroscopy. A detection limit of 0.58 nM was achieved in the linear range 1×10^?9 M to 1.2×10^?7 M. High sensitivity towards DA, good reproducibility and long‐term stability have been demonstrated without interference from ascorbic acid, uric acid, epinephrine, L ‐dopa, glucose. The sensing system was successfully applied for quantitative determination of dopamine in commercially available human blood serum.     

Intrinsic Acid–Base Properties of a Hexa‐2′‐deoxynucleoside Pentaphosphate,d(ApGpGpCpCpT): Neighboring Effects and Isomeric Equilibria

The intrinsic acid‐base properties of the hexa‐2′‐deoxynucleoside pentaphosphate, d(ApGpGpCpCpT) [=(A1?G2?G3?C4?C5?T6)=(HNPP)^5?] have been determined by ¹H NMR shift experiments. The pK_a values of the individual sites of the adenosine (A), guanosine (G), cytidine (C), and thymidine (T) residues were measured in water under single‐strand conditions (i.e., 10 % D₂O, 47 °C, I=0.1 M , NaClO₄). These results quantify the release of H⁺ from the two (N7)H⁺ (G?G), the two (N3)H⁺ (C?C), and the (N1)H⁺ (A) units, as well as from the two (N1)H (G?G) and the (N3)H (T) sites. Based on measurements with 2′‐deoxynucleosides at 25 °C and 47 °C, they were transferred to pK_a values valid in water at 25 °C and I=0.1 M . Intramolecular stacks between the nucleobases A1 and G2 as well as most likely also between G2 and G3 are formed. For HNPP three pK_a clusters occur, that is those encompassing the pK_a values of 2.44, 2.97, and 3.71 of G2(N7)H⁺, G3(N7)H⁺, and A1(N1)H⁺, respectively, with overlapping buffer regions. The tautomer populations were estimated, giving for the release of a single proton from five‐fold protonated H₅(HNPP)^±, the tautomers (G2)N7, (G3)N7, and (A1)N1 with formation degrees of about 74, 22, and 4 %, respectively. Tautomer distributions reveal pathways for proton‐donating as well as for proton‐accepting reactions both being expected to be fast and to occur practically at no “cost”. The eight pK_a values for H₅(HNPP)^± are compared with data for nucleosides and nucleotides, revealing that the nucleoside residues are in part affected very differently by their neighbors. In addition, the intrinsic acidity constants for the RNA derivative r(A1?G2?G3? C4?C5?U6), where U=uridine, were calculated. Finally, the effect of metal ions on the pK_a values of nucleobase sites is briefly discussed because in this way deprotonation reactions can easily be shifted to the physiological pH range.     

Protolytic properties of silica modified with maleinized linseed oil

The protolytic equilibria on the surface of silicas coated with a layer of maleinized linseed oil (MLO), a new type of carboxylic cation exchangers, were studied using potentiometric titration. The ionexchange capacity of the sorbents was determined, a parameter that first increases and then decreases with increasing concentration of MLO on the silica surface. For the dibasic carboxy groups of MLO, pK _a=3.99±0.04 and 4.73±0.04, values close to pK _a for succinic acid, a homogeneous analogue of the system under study.