不含亲水基团的偶氮苯衍生物L-B膜的制备和性质研究

本文合成了具有一定结构特点的偶氮苯的衍生物, 以元素分析和^1HNMR鉴定了B产物的组成和结构。采用L-B技术制备了其多层L-B膜, 以紫外可见光谱研究了膜中分子的聚集状态和膜的纵向均匀性; 以偏振紫外确定了膜中分子偶氮基的取向; L-B膜的小角度X射线衍射结果表明膜具有层状有序的周期性结构。     

Spectroscopic and optical characterization of porphyrin chromophores incorporated into ultrathin polyimide films

Polyamic acid (PAA) containing free-base porphyrin and zinc(II) porphyrin chromophores was synthesized by copolymerization of diphenylether-type tetracarboxylic dianhydride and diamines. The monolayer of the alkylamine salts of PAA (PAASs) at the air/water interface was deposited on solid substrates by the Langmuir-Blodgett (LB) technique. The PAAS LB films thus obtained were converted to polyimide (PI) LB films by chemical treatment. The fluorescence of porphyrin moieties in the PI LB film was observed, because of the weak electron-accepting properties of the diphenylether unit. Therefore, the photophysically important processes, such as photoinduced electron transfer, excitation energy transfer, and excitation energy migration could be investigated in relation to the layered nanostructures of the ultrathin PI films. The fluorescence spectrum suggested that the aggregation of porphyrin moieties in the PI LB films was effectively prevented by the use of polymeric films. The surface plasmon (SP) measurement showed that the thickness of the monolayers was 0.9-1.0 nm for PAAS films and 0.32-0.40 nm on average for PI LB films. The absorption dichroism of the Soret band of porphyrin indicated that porphyrin moieties in the PAAS and PI LB films are oriented in parallel with the substrate. These results showed that the orientation and the spatial distribution of porphyrin units can be efficiently regulated in the PI LB films in a nanometer dimension.     

The structures of Langmuir-Blodgett films of fatty acids and their salts

Recent advances in several experimental techniques have enabled detailed structural information to be obtained for floating (Langmuir) monolayers and Langmuir-Blodgett films. These techniques are described briefly and their application to the study of films of fatty acids and their salts is discussed. Floating monolayers on aqueous subphases have been shown to possess a complex polymorphism with phases whose structures may be compared to those of smectic mesophases. However, only those phases that exist at high surface pressures are normally used in Langmuir-Blodgett (LB) deposition. In single LB monolayers of fatty acids and fatty acid salts the acyl chains are in the all-trans conformation with their long axes normal to the substrate. The in-plane molecular packing is hexagonal with long-range bond orientational order and short-range positional order: known as the hexatic-B structure. This structure is found irrespective of the phase of the parent floating monolayer. The structures of multilayer LB films are similar to the structures of their bulk crystals, consisting of stacked bilayer lamellae. Each lamella is formed from two monolayers of fatty acid molecules or ions arranged head to head and held together by hydrogen bonding between pairs of acids or ionic bonding through the divalent cations. With acids the acyl chains are tilted with respect to the substrate normal and have a monoclinic structure, whereas the salts with divalent cations may have the chains normal to the substrate or tilted. The in-plane structures are usually centred rectangular with the chains in the trans conformation and packed in a herringbone pattern. Multilayer films of the acids show only a single-step order-disorder transition at the melting point. This temperature tends to rise as the number of layers increases. Complex changes occur when multilayer films of the salts are heated. Disorder of the chains begins at low temperatures but the arrangement of the head groups does not alter until the melting temperature is reached. Slow heating to a temperature just below the melting temperature gives, with some salts, a radical change in phase. The lamellar structure disappears and a new phase consisting of cylindrical rods lying parallel to the substrate surface and stacked in a hexagonal pattern is formed. In each rod the cations are aligned along the central axis surrounded by the disordered acyl chains.     

In-situ infrared spectroscopy of buried organic monolayers: influence of the substrate on titanium reactivity with a Langmuir-Blodgett film

The reactivity of metals vapor deposited onto organic monolayers has historically been correlated to the metal/terminal organic group chemistry. Here we demonstrate that the chemical composition of the substrate unexpectedly plays a significant role as well. In particular, the reactivity of evaporated titanium toward a cadmium stearate Langmuir-Blodgett (LB) film was found to depend on the substrate upon which the LB film was deposited. Infrared spectra taken in a modified ATR (Kretschmann) geometry with a thin Au substrate showed large changes in peak shape, peak position, and peak width in the C-H stretching region, indicating titanium penetration into the LB film and decomposition of the original well-packed monolayer structure. LB monolayers formed on a platinum oxide (PtO(x)) surface showed remarkably small changes after Ti deposition, indicating only a slight increase in disorder and no significant metal penetration into the film. Films on SiO2 substrates showed reactivity between that of Au and PtO(x). These differences in reactivity can be correlated primarily with the amount of available oxygen associated with each substrate, including surface oxide layers and water incorporated within the LB film.     

In situ spectroscopic characterization of rectifying molecular monolayers self-assembled on gold.

We report visible, Raman, and infrared spectra of self-assembled monolayers (SAMs) formed by the donor-(pi-bridge)-acceptor chromophore, Z-beta-[N-(omega-acetylthioalkyl)-4-quinolinium]-alpha-cyano-4-styryldicyanomethanide (CH3CO-S-CnH2n-Q3CNQ where n=8, 10), on gold-coated substrates. The data are compared with the spectra collected for the same compound in solution and in the solid state, and with those obtained for a Langmuir-Blodgett (LB) monolayer of C16H33-Q3CNQ deposited on gold. Spectral analysis confirms that in solution, in the solid state and in the LB film the chromophore has a zwitterionic (D+-pi-A-) ground state. At variance with this well-known result, our data show that in SAMs deposited on gold the chromophore has a more neutral, quinoid ground state. We relate this difference to the different packing of the molecules in the two different films: in SAMs in fact the chromophores stand almost vertical with respect to the substrate, whereas in LB films they make an angle of about 45 degrees. The Q3CNQ molecule is a well-known molecular rectifier, and for SAMs we were able to check the direction of electron flow at forward bias on the same samples that have been characterized spectroscopically, shedding light on the rectification mechanism.     

N,N,N＇,N＇-四苄基取代方块菁染料LB膜研究

方块菁染料在有机光导材料^[1,2]、有机太阳能存储^[2,3]、光记录^[4、有机光盘中红外吸收器^[4]以及光纤识别功能薄膜等领域中有着广泛应用前景.     

Origin of second harmonic generation optical activity of a tryptophan derivative at the air/water interface

Second harmonic generation optical activity (SHG-OA) of chiral monolayers of the tryptophan derivative N(alpha)-(tert-butoxycarbonyl)-tryptophan (BOC-Trp) at an air/water interface has been studied in detail. In combination with previously reported experimental measurements with the fundamental frequency variant Planck's 'h/' omega=2.20 eV (lambda=564 nm), new measurements with lambda=564 and 800 nm fully characterize the nonlinear susceptibility tensors of chiral and achiral (racemic) monolayers under two-photon resonant and nonresonant conditions of the fundamental frequency. A realistic computational approach including semiempirical, intermediate neglect of differential overlap (ZINDO/S) calculations has been used to calculate the nonlinear susceptibilities of model achiral and chiral monolayers composed of indole chromophores. There is satisfactory agreement between calculated and observed nonlinear susceptibilities, which constrains certain structural parameters of the monolayers including the absolute orientation of the long molecular axis of indole at the air/water interface. The origin of SHG-OA of BOC-Trp monolayers is discussed with reference of two distinct mechanisms at the microscopic level, designated type I or chiral assembly and type II or electronic coupling. Both mechanisms are studied in detail within the framework of ZINDO/S calculations. The dominant effect for the BOC-Trp monolayers is type I, involving chiral assembly of indole chromophores.     

Thermodynamic characteristics and Langmuir-Blodgett deposition behavior of mixed DPPA/DPPC monolayers at air/liquid interfaces

The role of dipalmitoylphosphatic acid (DPPA) as a transfer promoter to enhance the Langmuir-Blodgett (LB) deposition of a dipalmitoylphosphatidylcholine (DPPC) monolayer at air/liquid interfaces was investigated, and the effects of Ca2+ ions in the subphase were discussed. The miscibility of the two components at air/liquid interfaces was evaluated by surface pressure-area per molecule isotherms, thermodynamic analysis, and by the direct observation of Brewster angle microscopy (BAM). Multilayer LB deposition behavior of the mixed DPPA/DPPC monolayers was then studied by transferring the monolayers onto hydrophilic glass plates at a surface pressure of 30 mN/m. The results showed that the two components, DPPA and DPPC, were miscible in a monolayer on both subphases of pure water and 0.2 mM CaCl2 solution. However, an exception occurs between X(DPPA)=0.2 and 0.5 at air/CaCl2-solution interface, where a partially miscible monolayer with phase separation may occur. Negative deviations in the excess area analysis were found for the mixed monolayer system, indicating the existence of attractive interactions between DPPA and DPPC molecules in the monolayers. The monolayers were stable at the surface pressure of 30 mN/m for the following LB deposition as evaluated from the area relaxation behavior. It was found that the presence of Ca2+ ions had a stabilization effect for DPPA-rich monolayers, probably due to the association of negatively charged DPPA molecules with Ca2+ ions. Moreover, the Ca2+ ions may enhance the adhesion of DPPA polar groups to a glass surface and the interactions between DPPA polar groups in the multilayer LB film structure. As a result, Y-type multilayer LB films containing DPPC could be fabricated from the mixed DPPA/DPPC monolayers with the presence of Ca2+ ions.     

Langmuir and Langmuir-Blodgett films of poly(ethylene oxide)-b-poly(epsilon-caprolactone) star-shaped block copolymers

Self-assembly of poly(ethylene oxide)-block-poly(epsilon-caprolactone) five-arm stars (PEO-b-PCL) was studied at the air/water (A/W) interface. The block copolymers consist of a hydrophilic PEO core with hydrophobic PCL chains at the star periphery. All the polymers have the same number of ethylene oxide repeat units (9 per arm), and the number of epsilon-caprolactone repeat units ranges from 0 to 18 per arm. The Langmuir monolayers were analyzed by surface pressure/mean molecular area isotherms, compression-expansion hysteresis experiments, and isobaric relaxation measurements, and the Langmuir-Blodgett (LB) films' morphologies were investigated by atomic force microscopy (AFM). PCL homopolymers crystallize directly at the A/W interface in a narrow surface pressure range (11-15 mN/m). In the same pressure region, the star-shaped block copolymers undergo a phase transition corresponding to the collapse and the crystallization of the PCL chains as shown by the presence of a pseudoplateau in the isotherms. The LB films were prepared by transferring the Langmuir monolayers onto mica substrates at various surface pressures. AFM imaging confirmed the formation of PCL crystals in the LB monolayers of the PCL homopolymers and of the copolymers, but also showed that the PCL segments can undergo additional crystallization after monolayer transfer during water evaporation. The PCL crystal morphologies were also strongly influenced by the surface pressure and by the PEO segments.     

Effect of thickness and monolayer location on thermostability of metal stearate LB films studied by FT-IR reflection—absorption spectroscopy

LB films of Cd and Ca stearates with 1, 3, 9, and 21 monolayers were fabricated on silver-coated glass slides. 9-Monolayer LB films of Cd and Ca salts of deuterated stearic acid, in which the 1st, 5th, or 9th layer was replaced by 1 monolayer of undeuterated analogues, were also prepared on the above substrates. Temperature dependences of Fourier transform infrared (FT-IR) reflection—absorption (RA) spectra were examined for these LB films in the range 31–140°C. At room temperature, the hydrocarbon chains in these LB films were in a well-ordered state with a high degree of perpendicular orientation to the substrate. However, they became disordered at elevated temperatures. These order-disorder phase transition temperatures were dependent on the film thickness, to a small degree in the Cd stearate LB film (102–108°C), but to a large degree in the Ca stearate LB film (103–129°C). In the latter LB film, the effect of dehydration was inferred. The degree of disorder at high temperatures was dependent on the film thickness and the location of monolayer in the 9-monolayer LB films. This result is discussed in terms of the internal pressure within the LB film.     

Langmuir-Blodgett films of a Mo-blue nanoring [Mo(142)O(429)H(10)(H(2)O)(49)(CH(3)CO(2))(5)(CH(3)CH(2)CO(2))](30)(-) (Mo(142)) by the semiamphiphilic method

Langmuir monolayers and LB films of the ring-shaped mixed-valence polyoxomolybdate [Mo142O429H10(H2O)49(CH3CO2)5(CH3CH2CO2)](30-) (Mo142) dissolved in the aqueous subphase have been successfully fabricated by using the adsorption properties of a DODA monolayer. Infrared and ultraviolet-visible spectroscopy of the LB films indicates that Mo142 and DODA molecules are incorporated within these LB films. X-ray reflectivity experiments indicate that the LB films exhibit a well-defined lamellar structure formed by bilayers of DODA molecules alternating with monolayers of Mo142. Using behenic acid-modified hydrophobic quartz substrate is critical for the formation of the well-defined lamellar structure. From the values of the periodicity obtained by these experiments it is clear that the Mo142 clusters lie flat along the charged organic layers. AFM images also showed the flat and homogeneous films on the quartz substrates treated with behenic acid. Cyclic voltammograms of Mo142-LB films deposited on ITO substrates showed quasi-reversible oxidation/reduction waves with positive shift of the potential compared to the case of solution.     

Investigation of alignment mechanism of liquid crystal on polyimide Langmuir-Blodgett films by scanning tunnelling microscopy

The homogeneous alignment of a liquid crystal material, 4'-n-octyl-4-cyanobiphenyl (8CB), was achieved by polyimide Langmuir-Blodgett (LB) films. Scanning electron microscopy and scanning tunnelling microscopy measurements show that the alignment of the polyimide LB films with a grooveless surface occurs due to the orientation of the polyimide chains. We directly observe 8CB monolayers on oriented polyimide LB films. We find that the monolayers form a two dimensional crystalline structure and the 8CB molecules are always aligned along the chain direction of the polyimide. The results show that the alignment of 8CB molecules arises by an epitaxial growth on the oriented polyimide LB films.     

Langmuir and Langmuir-Blodgett films of N-(4-octadecyloxy-2-hydroxybenzylidene) derivatives of amino acids

Langmuir and Langmuir-Blodgett monolayers of N-(4-octadecyloxy-2-hydroxybenzylidene) derivatives of glycine, tyrosine, and phenylalanine were studied using pi-A isotherms and photoelastic modulated FTIR (PEM-FTIR). Based on compression modulus and interaction parameters, mixed monolayers of these compounds with stearylamine (SAM) showed well-organized monolayers compared to mixed systems with stearic acid (SA) and stearyl alcohol (SAL). The pure amphiphiles exhibited fairly well-ordered packing in the films, and in the mixtures, the ordering increased and showed a triclinic packing arrangement. For the phenylalanine amphiphile the packing showed slight disorder compared to the other two compounds. Surface properties of the LB films of these compounds on solid substrates were analyzed using static and dynamic contact angles of a series of liquids. The surface tension of coated substrates reflected clearly the highly acidic character. Fluidlike monolayers having a molecularly rough surface indicated high wettability for n-alkanes. In contrast, the monolayer containing well-ordered, well-packed alkyl chains indicated low wettability and small hysteresis.     

Molecular Orientation and Structure in LB Films of a Liquid Crystal MPUOPM Investigated by UV-Vis and IR Spectroscopy

"?Langmuir monolayers and LB films of 4-((s)-2-methylbutoxy)phenyl-(4'-(10-undecen-1-oyloxy)phenyl) methylenimine (MPUOPM) were investigated by ultraviolet-visible, polarized infrared spectroscopy. ?-A isotherms showed well-defined Langmuir monolayers were formed at an air/water interface for the MPUOPM and their mixture with SA. An inflection point at 13 mN/m appeared on the isotherm, which was due to the transition from the monolayer to multilayer. The polarized IR spectra of LB films of MPUOPM had provided new insight into the molecular orientation and structure. In LB films, the tilted angle between the alkyl chain and the normal line of the substrate was 48ffi, the tilted angle between the dipole moment of C=N and the normal line of the substrate was 51ffi. The alkyl chains assumed a trans-zigzag conformation but it included a few gauche conformers. The C=N groups were almost in one plane in the LB films. "     

Unimolecular rectification of monolayers of CH3C(O)S-C14H28Q(+)-3CNQ(-) and CH3C(O)S-C16H32Q(+)-3CNQ(-) organized by self-assembly, Langmuir-Blodgett, and Langmuir-Schaefer techniques

The advantage of "self-assembly" (strong covalent binding to substrates) was combined with the advantage of Langmuir-Blodgett (LB) or Langmuir-Schaefer (LS) transfer to a solid substrate (quantitative transfer of monolayers to the substrate). The electrical rectification (asymmetric conduction) by a monolayer of thioacetylalkylquinolinium tricyanoquinodimethanide was critically compared when these molecules had been transferred, by such competing techniques, onto gold electrodes, and then covered by a "cold gold" pad electrode. Unimolecular rectification was observed in the expected directions in the LB and LS monolayers. The Self-Assembled Monolayers (SAMs) were disordered; macroscopic measurements of rectification were unsuccessful for the SAMs, but successful for the down-stroke LB and LS monolayers, whose orientation and potential bonding to the Au surface should be identical to that of an ideal SAM.     

Self-organization of a wedge-shaped surfactant in monolayers and multilayers

The self-organization behavior of a wedge-shaped surfactant, disodium-3,4,5-tris(dodecyloxy)phenylmethylphosphonate, was studied in Langmuir monolayers (at the air-water interface), Langmuir-Blodgett (LB) monolayers and multilayers, and films adsorbed spontaneously from isooctane solution onto a mica substrate (self-assembled films). This compound forms an inverted hexagonal lyotropic liquid crystal phase in the bulk and in thick adsorbed films. Surface pressure isotherm and Brewster angle microscope (BAM) studies of Langmuir monolayers revealed three phases: gas (G), liquid expanded (LE), and liquid condensed (LC). The surface pressure-temperature phase diagram was determined in detail; a triple point was found at approximately 10 degrees C. Atomic force microscope (AFM) images of LB monolayers transferred from various regions of the phase diagram were consistent with the BAM images and indicated that the LE regions are approximately 0.5 nm thinner than the LC regions. AFM images were also obtained of self-assembled films after various adsorption times. For short adsorption times, when monolayer self-assembly was incomplete, the film topography indicated the coexistence of two distinct monolayer phases. The height difference between these two phases was again 0.5 nm, suggesting a correspondence with the LE/LC coexistence observed in the Langmuir monolayers. For longer immersion times, adsorbed multilayers assembled into highly organized periodic arrays of inverse cylindrical micelles. Similar periodic structures, with the same repeat distance of 4.5 nm, were also observed in three-layer LB films. However, the regions of organized periodic structure were much smaller and more poorly correlated in the LB multilayers than in the films adsorbed from solution. Collectively, these observations indicate a high degree of similarity between the molecular organization in Langmuir layers/LB films and adsorbed self-assembled films. In both cases, monolayers progress through an LE phase, into LE/LC coexistence, and finally into LC phase as surface density increases. Following the deposition of an additional bilayer, the film reorganizes to form an array of inverted cylindrical micelles.     

Interaction of small amounts of bovine serum albumin with phospholipid monolayers investigated by surface pressure and atomic force microscopy

The influence of small amounts of bovine serum albumin (BSA) (nM concentration) on the lateral organization of phospholipid monolayers at the air-water interface and transferred onto solid substrates as one-layer Langmuir-Blodgett (LB) films was investigated. The kinetics of adsorption of BSA onto the phospholipid monolayers was monitored with surface pressure isotherms in a Langmuir trough, for the zwitterionic dipalmitoylphosphatidyl ethanolamine (N,N-dimethyl-PE) and the anionic dimyristoylphosphatidic acid (DMPA). A monolayer of N,N-dimethyl-PE or DMPA incorporating BSA was transferred onto a solid substrate using the Langmuir-Blodgett technique. Atomic force microscopy (AFM) images of one-layer LB films displayed protein-phospholipid domains, whose morphology was characterized using dynamic scaling theories to calculate roughness exponents. For DMPA-BSA films the surface is characteristic of self-affine fractals, which may be described with the Kardar-Parisi-Zhang (KPZ) equation. On the other hand, for N,N-dimethyl-PE-BSA films, the results indicate a relatively flat surface within the globule. The height profile and the number and size of globules varied with the type of phospholipid. The overall results, from kinetics of adsorption on Langmuir monolayers and surface morphology in LB films, could be interpreted in terms of the higher affinity of BSA to the anionic DMPA than to the zwitterionic N,N-dimethyl-PE. Furthermore, the effects from such small amounts of BSA in the monolayer point to a cooperative response of DMPA and N,N-dimethyl-PE monolayers to the protein.     

Photoreactions and lateral patterning in Langmuir and Langmuir-Blodgett films

Reversible morphological changes occur with photoisomerization of azobenzene in Langmuir-Blodgett (LB) films complexed with polycations, which contradicts an implicit assumption of the concept of free volume that two-dimensional film structures are preserved during the photoisomerization. J-aggregates of chromophores are formed by two processes. The first process is "light-induced J-aggregation" in which photoisomerized molecules form J-aggregates. The other process is "triggered J-aggregation," in which photoisomerization of one of the components triggers J-aggregation of another chemical species in the mixed films. Both processes of J-aggregation are in many cases accompanied by large morphological changes of the films. However, LB films fabricated using processes under isobaric conditions do not change their morphology during light-induced J-aggregation and are patterned with J-aggregates using ultraviolet illumination through a photomask. Phase separation in mixed LB films gives rise to two-dimensional patterns, which are used to fabricate templates by using an amphiphilic silane-coupling agent as one of the components in the mixed LB films. Nanopatterns are also fabricated.     

Effect of packing on orientation and cis-trans isomerization of azobenzene chromophore in Langmuir-Blodgett film

Photoactive film material of long-chain azobenzene derivative, p-(omega-trimethylammoniodecyloxy)-p'-octyloxyazobenzene bromide (TAOAB), was fabricated into a Langmuir-Blodgett (LB) film by a polyion-complex technique using poly(sodium 4-styrenesulfonate) as a polyanion. To investigate the effect of the packing state of the azobenzene chromophore on its orientation and cis-trans isomerization, TAOAB was mixed with methyl stearate in the LB film matrix at various mole fractions (X(TAOAB)), and structural characterizations were subsequently carried out by means of Fourier transform infrared and ultraviolet-visible spectroscopies, X-ray diffraction analysis, and atomic force microscopy. The results obtained show that as the degree of packing increases, both the azobenzene chromophores and the hydrocarbon chains orient more perpendicularly to the surface of the LB film. In addition, reversible cis-trans photoisomerization of TAOAB took place upon alternate irradiation with UV and visible light even in a mixed LB film with the chromophores in a dense lateral packing state. In the process of thermal cis-to-trans isomerization, we found that the reaction rate is strongly affected by the packing state of TAOAB at 20 degrees C, reflecting the differences in steric hindrance among LB films of various X(TAOAB). In addition, higher activation energy was obtained for thermal cis-to-trans isomerization when the free volume around the chromophores became smaller.     

Using phospholipid Langmuir and Langmuir-Blodgett films as matrix for urease immobilization

The immobilization of enzymes in organized two-dimensional matrices is a key requirement for many biotechnological applications. In this paper, we used the Langmuir-Blodgett (LB) technique to obtain controlled architectures of urease immobilized in solid supports, whose physicochemical properties were investigated in detail. Urease molecules were adsorbed at the air-water interface and incorporated into Langmuir monolayers of the phospholipid dipalmitoyl phosphatidyl glycerol (DPPG). Incorporation of urease made DPPG monolayers more flexible and caused the reduction of the equilibrium and dynamic elasticity of the film. Urease and DPPG-urease mixed monolayers could be transferred onto solid substrates, forming LB films. A close packing arrangement of urease was obtained, especially in the mixed LB films, which was inferred with nanogravimetry and electrochemistry measurements. From the blocking effect of the LB films deposited onto indium tin oxide (ITO) substrates, the electrochemical properties of the LB films pointed to a charge transport controlled by the lipid architecture.