Air microwave-induced plasma: Detection of NO in the post-discharge using an ArF laser

ArF laser-induced fluorescence (LIF) spectroscopy was applied to the investigation of the density of NO achieved in the post-discharge of an N₂-O₂ microwave-induced plasma (2450 MHz). The fluorescence spectrum provides a determination of NO vibrational temperature downstream the discharge. Absolute concentration profiles were determined in the low-temperature region of the post-discharge.     

Two‐Dimensional Spatial Resolution of Concentration Profiles in Catalytic Reactors by Planar Laser‐Induced Fluorescence: NO Reduction over Diesel Oxidation Catalysts

Planar laser‐induced fluorescence (PLIF) enables noninvasive in situ investigations of catalytic flow reactors. The method is based on the selective detection of two‐dimensional absolute concentration maps of conversion‐relevant species in the surrounding gas phase inside a catalytic channel. Exemplarily, the catalytic reduction of NO with hydrogen (2 NO+5 H₂→2 H₂O+2 NH₃) is investigated over a Pt/Al₂O₃ coated diesel oxidation catalyst by NO PLIF inside an optically accessible channel reactor. Quenching‐corrected 2D concentration maps of the NO fluorescence above the catalytic surface are obtained under both, nonreactive and reactive conditions. The impact of varying feed concentration, temperature, and flow velocities on NO concentration profiles are investigated in steady state. The technique presented has a high potential for a better understanding of interactions of mass transfer and surface kinetics in heterogeneously catalyzed gas‐phase reactions.     

Boron‐chelating fluorescent probe (BOPB) in the red region combined with CE‐LIF for the detection of NO in mice liver

Precise measurement of nitric oxide (NO) is of great importance to understand the function of NO in liver and the mechanism of liver injury. 8‐(3’,4’‐Diamino phenyl)‐3,5‐(2‐hydroxyphenyl)‐dimethylene pyrrole (BOPB), a fluorescent probe in the red region (>600 nm) newly developed in our group, has good photostability and excitation/emission wavelength of 622/643 nm matching well with commercial 635 nm semiconductor laser of CE‐LIF detection. Therefore, BOPB was used in CE‐LIF for the determination of NO in mice liver. Both derivatization and separation conditions were optimized. Derivatization reaction of BOPB and NO was carried out in pH 7.4 PBS buffer at 35°C for 12 min and the separation of NO derivative of BOPB (BOPB‐T) was achieved within 7.0 min in pH 9.0 running buffer containing 15 mM H₃BO₃–NaOH and 15 mM SDS. Good linearity was found in the range of 1.0 × 10^?9–5.0 × 10^?7 M with the LOD of 0.02 nM. The proposed method was applied to the analysis of NO in real samples, and NO concentration was obviously increased in acute liver injury of mice. Compared to existing derivatization‐based CE‐LIF methods for NO, this method has lower LOD and less background interference owing to detection wavelength of BOPB in the red region.     

Detection of Copper Ion with Laser-Induced Fluorescence in a Capillary Electrophoresis Microchip

A capillary electrophoresis microchip coupled with a confocal laser-induced fluorescence (LIF) detector was successfully constructed for the analysis of trace amounts of heavy metals in environmental sources. A new fluorescence dye, RBPhOH, synthesized from rhodamine B, was utilized in a glass microchip to selectively determine copper with high sensitivity. A series of factors including running buffer concentration, detection voltage, and sample loading time were optimized for maximum LIF detector response and, hence, method sensitivity.     

Monitoring of environmental phenolic endocrine disrupting compounds in treatment effluents and river waters, Korea

The last two decades have witnessed growing scientific and public concerns over endocrine disrupting compounds (EDCs) that have the potential to alter the normal structure or functions of the endocrine system in wildlife and humans. In this study, the phenolic EDCs such as alkylphenol, chlorinated phenol and bisphenol A were considered. They are commonly found in wastewater discharges and in sewage treatment plant. In order to monitor the levels and seasonal variations of phenolic EDCs in various aquatic environments, a total of 15 water samples from the discharged effluent from sewage and wastewater treatment plants and river water were collected for 3 years. Ten environmental phenolic EDCs were determined by GC-MS and laser-induced fluorescence (LIF). GC-MS analysis revealed that most abundant phenolic EDCs were 4-n-heptylphenol, followed by nonlyphenol and bisphenol A during 2002-2003, while 4-t-butylphenol and 4-t-octylphenol were newly detected in aquatic environments in 2004.The category of phenolic EDCs showed similar fluorescence spectra and nearly equal fluorescence decay time. This makes it hard to distinguish each phenolic EDC from the EDCs mixture by LIF. Therefore, the results obtained from LIF analysis were expressed in terms of the fluorescence intensity of the total phenolic EDCs rather than that of the individual EDC. However, LIF monitoring and GC-MS analysis showed consistent result in that the river water samples had lower phenolic EDCs concentration compared to the effluent sample. This revealed a lower fluorescence intensity and the phenolic EDCs concentration in summer was lower than that in winter. For the validation of LIF monitoring for the phenolic EDCs, the correlation between EDCs concentration acquired from GC-MS and fluorescence intensity from LIF was obtained (R = 0.7379). This study supports the feasibility of the application of LIF into EDCs monitoring in aquatic systems.     

A high‐sensitivity LIF detector with silver mirror coating detection window and small‐angle optical deflection from collinear system for CE

An LIF detector was integrated into a CE system based on silver mirror coating detection window and small‐angle optical deflection from collinear configuration. For this detection scheme, the incident light beam was focused on capillary through the edge of a lens, resulting in a small deflection angle that deviated 18° from the collinear configuration. Meanwhile, the excitation light and emitted fluorescence were effectively reflected by silver mirror coating at the detection window. The fluorescence was collected through the center of the same lens and delivered to a PMT in the vertical direction. In contrast to conventional collinear LIF detection systems, the fluorescence intensity was greatly enhanced and the background level was significantly eliminated. FITC and FITC‐labeled amino acids were used as model analytes to evaluate the performance with respect to design factors of this system. The limit LOD was estimated to be 0.5 pM for FITC (S/N = 3), which is comparable to that of optimized confocal LIF systems. All the results indicate that the proposed detection scheme will be promising for development of sensitive and low‐cost CE system.     

Plasma total homocysteine and other thiols analyzed by capillary electrophoresis/laser-induced fluorescence detection: comparison with two other methods

We present a new analytical method for thiol quantification in plasma, based on the use of capillary electrophoresis (CE) and laser-induced fluorescence (LIF) to analyze 6-iodoacetamidofluorescein derivatives. Quantitative results of homocysteine, glutathione, cysteinylglycine, and cystationine are presented. A comparison of the quantitation of homocysteine in plasma, using high performance liquid chromatography/fluorescence detection and fluorescence polarization immunoassay is proposed. The results indicate that these techniques for plasma total homocysteine (tHcy) determination can be used interchangeably. The major advantage of CE-LIF is that it can quantitate the thiols in one run while keeping the price of consumables reasonable.     

Flow-injection on-line oxidizing fluorimetry and solid phase extraction for determination of thioridazine hydrochloride in human plasma

A simple, sensitive and specific fluorimetric method has been developed for the determination of thioridazine hydrochloride in human plasma involving solid phase extraction (SPE). In a flow-injection system, thioridazine hydrochloride is on-line oxidized into a strongly fluorescent compound with a lead dioxide solid-phase reactor and the fluorescence intensity is measured with a fluorescence detector (λ_ex = 349 nm, λ_em = 429 nm). A comparison of plasma sample pretreatment between SPE procedure and precipitation method was made and the results showed that SPE procedure was better than precipitation method. Under the optimum conditions, the fluorescence intensity is proportional to the concentration of thioridazine hydrochloride in the range from 0.015 to 2.000 μg mL⁻¹. The detection limit is 5.5 ng mL⁻¹ of thioridazine hydrochloride and the relative standard deviation is 1.06%. This method has been applied to determination of thioridazine hydrochloride in real patients plasma samples with the results compared with those obtained by HPLC method.     

Analysis of heavy metals in soils using laser-induced breakdown spectrometry combined with laser-induced fluorescence

The investigation of a hyphenated technique combining laser-induced breakdown spectrometry (LIBS) with laser-induced fluorescence (LIF) for the analysis of heavy metals in soils is described. In order to evaluate the applicability of the technique for fast in-situ analytical purposes, measurements were performed at atmospheric pressure. The plasma radiation was detected using a Paschen–Runge spectrometer equipped with photomultipliers for the simultaneous analysis of 22 different elements. The photomultiplier signals were processed by a fast gateable multichannel integrator. Calibration curves were recorded using a set of spiked soil samples. Limits of detection were derived from these curves for As (3.3 μg/g), Cd (6 μg/g), Cr (2.5 μg/g), Cu (3.3 μg/g), Hg (84 μg/g), Ni (6.8 μg/g), Pb (17 μg/g), Tl (48 μg/g) and Zn (98 μg/g) using the LIBS signals. LIBS-LIF measurements were performed for Cd and Tl. The excitation wavelength as well as the detected fluorescence wavelength for Cd was 228.8 nm. Alternatively, Tl was excited at 276.8 nm, where the observed fluorescence wavelength was 351.9 nm. The calibration curves based on the LIF signals showed significantly improved limits of detection of 0.3 and 0.5 μg/g for Cd and Tl, respectively.     

Determination of the cardiolipin content of individual mitochondria by capillary electrophoresis with laser-induced fluorescence detection

We report the application of capillary electrophoresis (CE) with postcolumn laser-induced fluorescence (LIF) detection to measure the cardiolipin content of individual mitochondria from cultured NS1 cells. Mitochondria were isolated by differential centrifugation and stained with the fluorescent dye 10-N-nonyl acridine orange which stoichiometrically binds to cardiolipin in a 1:1 or 2:1 ratio depending on the dye concentration. The green fluorescence resulting from the 1:1 complex was chosen for analysis because it is substantially more intense than the red fluorescence resulting from the 2:1 complex. Two dye concentrations that resulted in maximal and submaximal formation of the 1:1 10-N-nonyl acridine orange-cardiolipin complex were identified by spectrofluorometry. Individual mitochondria stained with both dye concentrations were separated and detected by CE with LIF detection. The data from mitochondria dosed with the lower dye concentration, where it is assumed that all the dye added to the mitochondrial sample was bound to cardiolipin, were used to derive a sensitivity factor relating fluorescence intensity of a mitochondrial event to its cardiolipin content. Using this factor, the cardiolipin contents of individual mitochondria stained with the higher dye concentration were determined, and ranged from 1.2 to 920 amol, with a median value of 4 amol. These results suggest a new strategy for estimating the organellar content of compounds that can be fluorescently tagged.     

A Fluorescence Quenching Method for the Determination of Nitrite with Indole

A new fluorescence quenching method has been developed to determine nitrite in water and food samples. The method is based on the reaction between nitrite and the fluorescent indole to form a compound which has no fluorescence in acidic medium. The fluorescence intensity was measured in 1 cm quartz cell with excitation and emission wavelengths of 285 and 350 nm, respectively. The relationship was obtained between the fluorescence intensity and nitrite concentration in the range 0.01–0.6 μg ml⁻¹. The detection limit was 2.5 ng ml⁻¹. The proposed method was applied to determine nitrite in water and food samples. The mechanism involved in the reaction was studied.     

Determination of jasmonic acid in bark extracts from <Emphasis Type="Italic">Hevea brasiliensis</Emphasis> by capillary electrophoresis with laser-induced fluorescence detection

A simple and sensitive method is described for determination of jasmonic acid (JA) in plant tissues. The method is based on derivatization of JA with 5-bromomethylfluorescein (5-BMF) and separation and quantification of the resulting 5-BMF–JA derivative by capillary electrophoresis coupled to laser-induced fluorescence detection (CE–LIF). The derivatization conditions were studied in detail. Our results indicated that 5-BMF-labeled JA could be well separated from other plant hormones present in the sample by use of 20 mmol L^–1 borate buffer (pH 8.5). The response to JA was a linear function of concentration in the range 1 to 100 mol L^–1, with a correlation of 0.9986. Our preliminary work showed that the proposed method had fairly good selectivity and sensitivity. Only small amounts of plant sample are needed to complete the analysis. This described method enables the analysis of JA in crude extracts without extra purification and enrichment procedures.     

A novel detection of radon based on its decay product inducing conformational changes of an aptamer probe

This study proposes a novel method for the detection of inert gas radon using a label-free, specific, fluorescence-sensing aptamer in the context of PW17-OG system. This method utilizes the cyanine dye OliGreen (OG) as a signal reactor and the aptamer PW17 as a fluorescent identification probe. When OG integrates into the free curling PW17, a strong fluorescence signal is generated. After radon decays, the long lived naturally occurring radon progeny Pb being disposed and introduced to the system. Lead ions induce PW17 to form a stable G-quadruplex, thereby inhibiting the interaction between OG and PW17 and resulting in a reduction of the fluorescence intensity. The fluorescence intensity show a good linear relationship with lead ion and the radon concentration (D), thereinto, We fitted linear regression of radon concentration in the range of 0.92–4.22 (×10⁴ Bqhm⁻³) to receive a good relationship between ΔF and the concentration of radon with the detection limit of 1963 Bqhm⁻³. This method has been successfully applied for detecting standard cumulative concentration of radon and the detection limit reached the national standard of China. This sensitive method can exclude radiation damage in field testing, furthermore, it explores a new field in biological analysis using an aptamer to detected inorganic, gaseous, and radioactive materials.     

Development of a ligase detection reaction/CGE method using a LIF dual‐channel detection system for direct identification of allelic composition of mutated DNA in a mixed population of excess wild‐type DNA

We developed an inexpensive LIF dual‐channel detection system and applied it to a ligase detection reaction (LDR)/CGE method to identify the allelic composition of low‐abundance point mutations in a large excess of wild‐type DNA in a single reaction with a high degree of certainty. Ligation was performed in a tube with a nonlabeled common primer and multiplex discriminating primers, each labeled with a different standard fluorophore. The discriminating primers were directed against three mutant variations in codon 12 of the K‐ras oncogene that have a high diagnostic value for colorectal cancer. LDR products generated from a particular K‐ras mutation through successful ligation events were separated from remaining discriminating primers by CGE, followed by LIF detection using the new system, which consists of two photomultiplier tubes, each with a unique optical filter. Each fluorophore label conjugated to the corresponding LDR product produced a distinct fluorescence signal intensity ratio from the two detection channels, allowing spectral discrimination of the three labels. The ability of this system to detect point mutations in a wild‐type sequence‐dominated population, and to disclose their allelic composition, was thus demonstrated successfully.     

Anthracycline analysis by capillary electrophoresis. Application to the analysis of daunorubicine in Kaposi sarcoma tumor.

Laser-induced fluorescence (LIF) detection is now a well-known sensitive and selective detection mode for capillary electrophoresis (CE) analysis. It has been shown to be 100- to 100,000-times more sensitive than UV detection and little work has been done using LIF in conjunction with high-performance liquid chromatography (HPLC). The need for greater resolution and higher sensitivity for the analysis of anthracyclines (fluorescent chemotherapic drugs), prompted us to compare CE-LIF and HPLC-LIF, for the detection of these substances. CE-LIF sensitivity based on quantity of anthracycline injected is 50-times greater than that obtained with HPLC-LIF, because of the injected sample volume. Analysis of daunorubicin in Kaposy sarcoma tumors and in plasma are presented. The decrease of the concentration of daunorubicin in the tumor and in the plasma following time show the same behavior, indicating identical concentrations of the anthracycline in both samples.     

A Novel Method to Determine DNA by Use of Molecular “Light Switch” of Ru(phen)2(dppz)

A novel fluorimetric method was developed for selective determination of DNA with the molecular “light switch” complex of Ru(phen)₂(dppz)²⁺. The maximum fluorescence intensity was produced in the pH range 9.3–11.5, with the maximum excitation and emission wavelength of 453.0 and 598.0 nm, respectively. Under the optimum conditions, the fluorescence intensity was in proportion to the concentration of DNA. The linear range for calfthymus DNA, salmon sperm DNA, and herring sperm DNA are 0–0.9 μg/mL. The limits of detection for calfthymus DNA, salmon sperm DNA, and herring sperm DNA are 2.0, 1.8, and 5.4 ng/mL, separately. When the proposed method was used to determine DNA in the presence of some coexisting substances, a satisfactory result was obtained.     

Chemical sensing in two dimensional porous covalent organic nanosheets

Two new imide-based crystalline, porous, and chemically stable covalent organic frameworks (COFs) (TpBDH and TfpBDH) have been successfully synthesized employing solvothermal crystallization route. Furthermore, thin layered covalent organic nanosheets (CONs) were derived from these bulk COFs by the simple liquid phase exfoliation method. These 2D CONs showcase increased luminescence intensity compared to their bulk counterparts (COFs). Notably, TfpBDH-CONs showcase good selectivity and prominent, direct visual detection towards different nitroaromatic analytes over TpBDH-CONs. Quite interestingly, TfpBDH-CONs exhibit a superior “turn-on” detection capability for 2,4,6-trinitrophenol (TNP) in the solid state, but conversely, they also show a “turn-off” detection in the dispersion state. These findings describe a new approach towards developing an efficient, promising fluorescence chemosensor material for both visual and spectroscopic detection of nitroaromatic compounds with very low [10^–5 (M)] analyte concentrations.     

Sensitivity evaluation of rhodamine B hydrazide towards nitric oxide and its application for macrophage cells imaging

A colorless and non-fluorescent rhodamine derivative, rhodamine B hydrazide (RH), is applied to detect nitric oxide and form fluorescent rhodamine B (RB). The reaction mechanism of RH with NO is proposed in this study. The probe shows good stability over a broad pH range (pH>4). Furthermore, fluorescence intensity of RH displays an excellent linearity to the NO concentration and the detection limit is as low as 20 nM. A 1000-fold fluorescence turn-on from a dark background was observed. Moreover, the selectivity study indicated that the fluorescence intensity increasing in the presence of NO was significantly higher than those of other reactive oxygen/nitrogen species. In exogenously generated NO detection study, clear intracellular red fluorescence was observed in the presence of S-nitroso-N-acetyl-D,L-penicillamine (SNAP, a kind of NO releasing agent). In endogenously generated NO detection study, increasing incubation time of RH with lipopolysaccharied (LPS) pre-treated cells could obtain a highly fluorescent cell image. These cell imaging results demonstrated that RH can efficiently penetrate into Raw 264.7 cells and be used for detection of exogenously and endogenously generated nitric oxide.     

Solid-support fluorescent derivatization of picomoles of protein at low concentration with FITC

A new method based on solid-support reaction is described to realize fluorescent derivatization of proteins at concentrations as low as 10⁻⁸ M. A simple, low-cost homemade capillary C18 cartridge was fabricated as the solid-support reactor. Using bovine serum albumin (BSA) as a test protein, we demonstrated that the protein can be captured by this reactor and then labeled by fluorescein isothiocyanate (FITC, isomer I) on solid-support. Unwanted fluorescent intruder (excrescent FITC and products of secondary reactions) were removed from target easily. The analysis by nano-HPLC with laser-induced fluorescence (LIF) detection was described. The effect of reaction conditions on the derivatization has been evaluated and discussed. The use of the solid-support reactor allows easy handling of as little as 8.5 pmol of BSA. A fraction from weak anion-exchange chromatography (WAX) of human liver extract was used as an illustrative example of application to real samples.     

Capillary electrophoresis‐laser‐induced fluorescence detection of rat brain catecholamines with microwave‐assisted derivatization

In this study, a rapid and sensitive method is described for the catecholamines detection in rat brain. CE with LIF detection for the determination of FITC derivatized catecholamines (dopamine, epinephrine, and norepinephrine) was demonstrated. Conventional water bath and microwave‐assisted derivatization methods were employed and a significant reduction in the derivatization time from 2 h for the conventional water bath at room temperature (ca. 25°C) to 2 min for the microwave‐assisted derivatization was achieved. Online sample concentration of field‐amplified sample stacking (FASS) method was employed to achieve higher sensitivities (the detection limits obtained in the normal injection mode ranged from 2.6 to 4.5 ng L^?1 and in the FASS mode ranged from 22 to 34 pg L^?1). Furthermore, this microwave‐assisted derivatization CE–LIF method successfully determined catecholamines in rat brain with as low as 100 ng L^?1 (FASS mode) to 10 μg L^?1 (normal injection mode). This CE–LIF method provided better detection ability when compared to the best reports on catecholamines analyses.