Untersuchungen an Metallkatalysatoren. XI. Untersuchungen an eisen-, kobalt- und nickelmodifizierten Pt-η-Al2O3-Katalysatoren

Investigations on Metal Catalysts. XI. Investigations on Pt? η-Al₂O₃ Catalysts Modifieded by Iron, Cobalt, and Nickel Pt? Me? η-Al₂O₃ catalysts (M: Fe, Co, Ni) were characterized by magnetic investigations, reflectance spectra and determination of dispersity (chemisorption of CO, oxygen-hydrogen titration), respectively. The phase structure of platinum-rich catalysts is composed of a high degree by Pt₃Fe super-structure. All the Pt? Fe? η-Al₂O₃ catalysts contained Fe^III ions in octahedral symmetry. The dispersity of the metallic components is determined essentially by their phase structure.     

Influence of electronic state and dispersion of platinum particles on the conversion and selectivity of hydrogenation of an α,β-unsaturated aldehyde in supercritical carbon dioxide

The selective hydrogenation of cinnamaldehyde (CAL) was investigated using silica supported platinum catalysts in supercritical carbon dioxide. Selectivity to cinnamyl alcohol (COL) is enhanced as Pt⁰/Pt²⁺ ratio increases; namely, zero-valent metallic surface is beneficial to the formation of COL compared with less reduced surface. The influence of Pt⁰/Pt²⁺ ratio is more significant on the selectivity than on the total conversion. For the catalyst with small Pt⁰/Pt²⁺ value, the selectivity also depends on the degree of platinum dispersion. The selectivity to COL is higher for higher degree of platinum dispersion. The CO₂ pressure did not affect the conversion and selectivity so much.     

ZrO4/SiO2-Al2O3催化肉桂醛MPV转移加氢性能

以九水合硝酸铝（Al（NO₃）₃·9H₂O）与正硅酸乙酯（TEOS）为前驱盐,采用溶胶-凝胶法制备一系列不同Al₂O₃含量的SiO₂-Al₂O₃复合氧化物,并通过浸渍硝酸氧锆引入ZrO₂,制备ZrO₂/SiO₂-Al₂O₃复合氧化物催化剂,考察催化剂在肉桂醛（CAL）MPV转移加氢中的催化性能,并结合N₂物理吸附、X射线粉末衍射（XRD）、傅里叶变换红外光谱（FTIR）、NH₃-程度升温脱附（NH₃-TPD）、Py-原位红外（Py-IR）等技术,研究催化剂结构、织构以及表面性质与其催化性能间的构效关系.研究表明,所制备的催化剂均以L酸为主,并含有少量B酸中心,这使得加氢产物以肉桂醇（COL）为主,并含有少量1-苯丙烯-2-丙基醚（CPE）.Al₂O₃含量不仅影响催化剂表面的酸中心数量,而且对催化剂的织构参数有较大影响.随Al₂O₃含量的增加,催化剂表面L酸与B酸中心均有所增加,而孔径则持续变小,这使得催化反应呈现CAL转化率先增加后减少、目标产物COL选择性先稍有减小后有所增加的趋势.在Si/Al比为2时,催化剂具有最优的催化性能,优化反应条件下,CAL转化率达96%,目标产物COL选择性达90%.     

Pt LIII-edge XANES and EXAFS studies on γ-Al2O3 supported Pt catalysts

Pt L_III-edge XANES and EXAFS were employed to investigate the nature of Pt/γ-Al₂O₃, Pt−Sn/γ-Al₂O₃ and Pt−Fe/γ-Al₂O₃ catalysts. The results indicated that Pt species on these catalysts were all in the oxidized states before reduction, and in the metallic states after reduction. The dispersity of the Pt species on the catalysts was very high after reduction. The electronic properties of the highly dispersed Pt species were different from that of the bulk Pt in large crystallites. An interaction between Pt and the metal-oxide modified γ-Al₂O₃ support is proposed. The interaction improved the dispersity of the Pt species on the catalysts and is thought to be the reason for the enhanced activity and selectivity for dehydrogenation reactions over these catalysts.     

Influence of Adding Molybdenum on Structure and Performance of FexOy/SBA-15 Catalysts in Selective Oxidation of Propene

Mixed iron and molybdenum oxide catalysts supported on nanostructured silica, SBA-15, were synthesized with various Mo/Fe atomic ratios ranging from 0.07/1.0 to 0.57/1.0. Structural characterization of as-prepared Mo_xO_y_Fe_xO_y/SBA-15 samples was performed by nitrogen physisorption, X-ray diffraction, and DR-UV-Vis spectroscopy. Adding molybdenum resulted in a pronounced dispersion effect on supported iron oxidic species. Increasing atomic ratio up to 0.21Mo/1.0Fe was accompanied by decreasing species sizes. Strong interactions between iron and molybdenum during the synthesis resulted in the formation of Fe−O−Mo structure units, possibly Fe₂(MoO₄)₃-like species. Reducibility of Mo_xO_y_Fe_xO_y/SBA-15 catalysts was investigated by temperature-programmed reduction experiments with hydrogen as reducing agent. The lower reducibility obtained when adding molybdenum was ascribed to both dispersion and electronic effect of molybdenum. Catalytic performance of Mo_xO_y_Fe_xO_y/SBA-15 samples was studied in selective gas-phase oxidation of propene with O₂ as oxidant. Adding molybdenum resulted in an increased acrolein selectivity and a decreased selectivity towards total oxidation products.     

Chemoselective Hydrogenation of Nitroaromatics at the Nanoscale Iron(III)–OH–Platinum Interface

Catalytic hydrogenation of nitroaromatics is an environment‐benign strategy to produce industrially important aniline intermediates. Herein, we report that Fe(OH)_x deposition on Pt nanocrystals to give Fe(OH)_x/Pt, enables the selective hydrogenation of nitro groups into amino groups without hydrogenating other functional groups on the aromatic ring. The unique catalytic behavior is identified to be associated with the Fe^III‐OH‐Pt interfaces. While H₂ activation occurs on exposed Pt atoms to ensure the high activity, the high selectivity towards the production of substituted aniline originates from the Fe^III‐OH‐Pt interfaces. In situ IR, X‐ray photoelectron spectroscopy (XPS), and isotope effect studies reveal that the Fe³⁺/Fe²⁺ redox couple facilitates the hydrodeoxygenation of the ‐NO₂ group during hydrogenation catalysis. Benefitting from Fe^III‐OH‐Pt interfaces, the Fe(OH)_x/Pt catalysts exhibit high catalytic performance towards a broad range of substituted nitroarenes.     

Chemoselective Hydrogenation of Nitroaromatics at the Nanoscale Iron(III)–OH–Platinum Interface

Catalytic hydrogenation of nitroaromatics is an environment-benign strategy to produce industrially important aniline intermediates. Herein, we report that Fe(OH)_x deposition on Pt nanocrystals to give Fe(OH)_x/Pt, enables the selective hydrogenation of nitro groups into amino groups without hydrogenating other functional groups on the aromatic ring. The unique catalytic behavior is identified to be associated with the Fe^III-OH-Pt interfaces. While H₂ activation occurs on exposed Pt atoms to ensure the high activity, the high selectivity towards the production of substituted aniline originates from the Fe^III-OH-Pt interfaces. In situ IR, X-ray photoelectron spectroscopy (XPS), and isotope effect studies reveal that the Fe³⁺/Fe²⁺ redox couple facilitates the hydrodeoxygenation of the -NO₂ group during hydrogenation catalysis. Benefitting from Fe^III-OH-Pt interfaces, the Fe(OH)_x/Pt catalysts exhibit high catalytic performance towards a broad range of substituted nitroarenes.     

Ethanol synthesis from syngas on Mn- and Fe-promoted Rh/γ-Al2O3

The catalytic hydrogenation of CO was studied over Mn- and/or Fe-promoted Rh/γ-Al₂O₃ catalysts. The catalysts were characterized by means of XRD, BET, H₂-TPR·H₂-TPD, XPS and DRIFTS. CO hydrogenation results showed that the doubly Mn- and Fe-promoted Rh/γ-Al₂O₃ catalysts exhibited superior catalytic activity and better ethanol selectivity. The DRIFTS results showed that Mn promoter stabilized the adsorbed CO on Rh⁺ and Fe stabilized adsorbed CO on Rh⁺ and Rh⁰, especially Rh⁰. The fact that doubly Mn- and Fe-promoted Rh/γ-Al₂O₃ owned more (Rhx⁰–Rhy⁺)–O–Fe³⁺·(Fe²⁺) active species was proposed to be a crucial factor accounting for its higher ethanol selectivity.     

萘在贵金属Pd、Pt及Pd-Pt催化剂上的加氢活性及耐硫性能

采用等体积浸渍法制备了SiO2-Al2O3负载的Pd、Pt单金属催化剂及Pd/Pt摩尔比分别为1∶1、1∶4、4∶1的双金属催化剂(Pd1Pt1、Pd1Pt4、Pd4Pt1),对其进行X射线衍射(XRD)、透射电镜(TEM)、CO化学吸附和X射线光电子能谱(XPS)表征,并详细考察了各催化剂的萘加氢活性和耐硫性能.结果表明,在实验考察范围内,Pd4Pt1催化剂上的萘转化率最高可达98.2%,全饱和产物十氢萘选择性最高可达93.6%,十氢萘反/顺生成率之比最高可达7.8,均高于单金属Pd(97.5%,59.1%,4.3)和Pt(96.8%,39.9%,2.9)催化剂的值.萘在三种催化剂上的加氢速率顺序为vPd4Pt1vPdvPt.添加二苯并噻吩(DBT)后Pd4Pt1上的萘转化率和十氢萘选择性仍然最高,十氢萘反/顺比在Pt催化剂上不受影响,在Pd4Pt1催化剂上稍有降低,而在Pd催化剂上降低明显.在三种不同Pd/Pt摩尔比的双金属催化剂中,Pd4Pt1催化剂上的萘转化率和十氢萘选择性在添加DBT前后都是最佳的.     

Tailoring the surface structure of iron compounds to optimize the selectivity of 3-nitrostyrene hydrogenation reaction over Pt catalyst

Selective hydrogenation of substituted nitroarenes is an important reaction to obtain amines.Supported metal catalysts are wildly used in this reaction because the surface structure of supports can tune the properties of the supported metal nanoparticles （NPs） and promote the selectivity to amines.Herein,Pt NPs were immobilized on Fe OOH,Fe₃O₄andα-Fe₂O₃nanorods to synthesize a series of iron compounds supported Pt catalysts by liquid phase reduction me...     

Hydrogenation of citral over pt and pt-fe/sio2 catalysts

Summary Pt/SiO₂ and Pt-Fe/SiO₂ catalysts having a Pt loading ranging from 0.5 to 3.0 wt.% and a fixed amount of Fe in the bimetallic series, 1.0 wt.% have been prepared by the impregnation procedure, followed by calcinations and reduction in H₂ flow at 773 K. The samples were characterized by N₂ adsorption at 77 K, H₂ chemisorption at 298 K, TEM, TPR and XPS. The hydrogenation of citral at 363 K and 8.3 bar over a series of Pt/SiO₂ and Pt-Fe/SiO₂ catalysts was studied. Thus, the selectivity towards the unsaturated alcohol (geraniol + nerol) decreases at high loads of monometallic Pt. An effect of polarization of the C=O bond due to the presence of Fe³⁺ species leads to catalysts active and highly selective to the hydrogenation of the carbonyl bond. Characterization results showed that Pt is present as Pt^o and Fe mainly asFe³⁺.     

高效组合型Pt-Fe/C 催化剂用于肉桂醛选择性加氢反应

采用有机金属化合物Pt2(dba)3(dba为二亚苄基丙酮)还原分解法制得均匀分布的Pt纳米颗粒(粒径在2.0nm左右),直接吸附到经预处理的Fe/C载体上,即得到了组合型Pt-Fe/C催化剂.采用透射电子显微镜(TEM)、X射线光电子能谱(XPS)和能量散射X射线谱(EDS)等技术表征了催化剂表面Pt颗粒大小分布,Pt、Fe化学态和催化剂表面元素等.将该组合型催化剂用于肉桂醛(CAL)选择性加氢反应,获得了良好的效果,其催化活性比浸渍法制备的Pt/C催化剂高1倍以上.在60°C、2.5h、4.0MPaH2反应条件下,1%(w,质量分数)Pt-1.5%(w)Fe/C催化剂肉桂醛加氢转化率为99.2%,肉桂醇(COL)选择性达到85.0%.     

Catalytic behavior of supported Pd catalysts in the selective hydrogenation of campholenic aldehyde to naturanol

Selective catalytic reduction of campholenic aldehyde to naturanol was investigated over Sn-and Fe-doped SiO₂, and Fe₂O₃-supported Pd catalysts. On Pd/SiO₂ and Pd-Sn/SiO₂ only saturated campholenic aldehyde is formed. Addition of Fe increases the C=O hydrogenation rate producing the corresponding unsaturated alcohol with a good selectivity. Also Fe₂O₃-supported catalysts were found to be more selective towards carbonyl hydrogenation. Addition of tin to Pd/Fe₂O₃ contributes to a further selectivity enhancement towards naturanol.     

Characterization and Activity of Iron-Manganese Catalysts for Carbon Monoxide Hydrogenation

Studies on the structural changes and catalytic behavior of iron-manganese catalysts for CO hydrogenation were conducted using Mossbauer spectroscopy, X-ray diffraction, temperature programmed reduction and kinetic measurements. It was observed that the reduction of the mixed oxide catalyst precursors proceeds via the formation of Fe_3-xMn_xO₄,Mn_3-xFe_xO₄ mixed spinel and Fe_1-zMn₂O mixed oxide to α-iron and MnO. After use for CO hydrogenation, catalysts are oxidized as well as carburized. The Mn_3-yFe_yO₄ mixed spinel and Fe_1-2Mn_zO mixed oxide are the most powerful phases for olefin production. The highest attainable 2–4 low carbon olefin selectivity is 41% with an 86% conversion level. Higher manganese content or lower reduction temperatures may change the carbide formed from χ-Fe₅C₂ to the more unstable ?′-Fe₂₂C. Carbide formation is greatly dependent on manganese content and activation procedure used.     

Electrocatalysis and redox behavior of Pt2+ ion in CeO2 and Ce0.85Ti0.15O2: XPS evidence of participation of lattice oxygen for high activity

Electronic states of CeO₂, Ce_1????em>x Pt _x O_2????em>δ , and Ce_{1????em>x????em>y} Ti _y Pt _x O_2????em>δ electrodes have been investigated by X-ray photoelectron spectroscopy as a function of applied potential for oxygen evolution and formic acid and methanol oxidation. Ionically dispersed platinum in Ce_1????em>x Pt _x O_2????em>δ and Ce_{1????em>x????em>y} Ti _y Pt _x O_2????em>δ is active toward these reactions compared with CeO₂ alone. Higher electrocatalytic activity of Pt²⁺ ions in CeO₂ and Ce_1????em>x Ti _x O₂ compared with the same amount of Pt⁰ in Pt/C is attributed to Pt²⁺ ion interaction with CeO₂ and Ce_1????em>x Ti _x O₂ to activate the lattice oxygen of the support oxide. Utilization of this activated lattice oxygen has been demonstrated in terms of high oxygen evolution in acid medium with these catalysts. Further, ionic platinum in CeO₂ and Ce_1????em>x Ti _x O₂ does not suffer from CO poisoning effect unlike Pt⁰ in Pt/C due to participation of activated lattice oxygen which oxidizes the intermediate CO to CO₂. Hence, higher activity is observed toward formic acid and methanol oxidation compared with same amount of Pt metal in Pt/C.     

Pt (111)面和Pt14团簇上肉桂醛吸附及选择性加氢机理研究

利用密度泛函理论研究了Pt（111）面及Pt₁₄团簇对肉桂醛（CAL）的吸附作用和不完全加氢的反应机理。分析吸附能结果表明,肉桂醛分子以C=O与C=C键协同吸附在Pt（111）面上的六角密积（Hcp）位最稳定,以C=C键吸附在Pt₁₄团簇上最稳定,且在Pt₁₄团簇上的吸附作用较Pt（111）面更强。由过渡态搜索并计算得到的反应能垒及反应热可知,肉桂醛在Pt（111）面和Pt₁₄团簇上均较容易对C=O键加氢得到肉桂醇（COL）。其中,优先加氢O原子为最佳反应路径,即Pt无论是平板还是团簇对肉桂醛加氢均有较好的选择性。同时发现,肉桂醛分子在Pt（111）面的加氢反应能垒较Pt₁₄团簇上更低,即Pt的催化活性及对肉桂醛加氢产物选择性与其结构密切相关,其中,Pt（111）面对生成肉桂醇更加有利。     

The oxidation of carbon monoxide on a catalyst with a spinel structure containing Mg ferrite

The oxidation of carbon monoxide on xMgO · yFe₂O₃ catalysts was studied over the temperature range 440–660 K. The catalysts contained 5, 40, and 75 at % Fe and the spinel MgFe₂O₄ and MgO phases. Complete CO conversion on compact and deposited (on γ-Al₂O₃) catalysts containing 75 at. % Fe occurred at 650–660 K. The kinetics of interaction of CO with adsorbed oxygen was studied on catalysts with 5 and 40 at % Fe below and above the Curie point (T _c = 593 ± 10 K). The differences in the reaction orders with respect to gaseous CO and adsorbed oxygen below and above T _c were explained as follows. In the ferromagnetic state of the active MgFe₂O₄ phase, oxidation involved adsorbed oxygen localized at oxygen vacancies in the environment of Fe³⁺ ions, whereas, in the paramagnetic state, superexchange interactions were absent in spinel structure fragments.     

八面体四氧化三铁亚微米晶负载铂催化剂用于室温催化氧化甲醛（英文）

空气中低浓度甲醛的治理和消除一直备受关注.在较低的反应温度下将甲醛转化为CO_2和H_2O的催化氧化法具有能耗低、效率高和环境友好等优点,被认为是一种最具应用发展前景的甲醛消除技术.在各种催化剂体系中,一些铁基氧化物(Fe_2O_3,FFe_3O_4或ferrihydrite)负载的Pt催化剂表现出较为优异的催化性能,能够在室温下实现甲醛的完全氧化.越来越多的研究表明,载体材料的结构及形貌是影响贵金属催化剂性能的主要因素.因此,深入研究Pt物种在不同类型铁基氧化物表面的分散情况及界面间相互作用,对理解催化剂活性中心的性质,设计制备性能更加优异的负载型贵金属催化剂具有重要科学意义.本文采用共沉淀法一步合成出八面体Fe_3O_4亚微米晶负载Pt催化剂(Pt/Fe_3O_4),考察了不同热处理温度对催化剂催化甲醛氧化反应性能的影响.结果表明,在80°C下热处理的催化剂(Pt/Fe_3O_4-80)具有很高的催化活性,在室温下甲醛的转化率可接近100%.随着催化剂热处理温度的升高,催化剂活性有所降低.此外,Pt/Fe_3O_4催化剂还表现出良好的稳定性,经长时间存放或连续运行后催化剂的活性基本保持不变.此外,在一定湿度范围内(RH=30%–80%),水的存在能够显著提高Pt/Fe_3O_4催化剂的甲醛催化氧化性能.采用各种表征技术对Pt/Fe_3O_4的结构、形貌、价态及氧化还原性等物理化学性质进行了研究.结果表明:采用该合成方法能够得到粒径较为均一、具有尖晶石结构和八面体形貌的Fe_3O_4亚微米晶,尺寸较小的Pt纳米粒子(平均2.5 nm)均匀分布在八面体Fe_3O_4晶体的表面,且Fe_3O_4载体表面还存在一定量的羟基物种.随着热处理温度的升高,催化剂表面的Pt物种和Fe物种的价态均发生明显变化.结果证实,Pt纳米粒子与Fe_3O_4载体间的相互作用力会随着热处理温度的升高而发生明显变化.对于性能较为优异的Pt/Fe_3O_4-80催化剂,Pt纳米粒子与Fe_3O_4载体之间存在着强度适宜的相互作用,能够产生相对较多的Pt-O-Fe Ox和Pt-OH-Fe Ox界面活性位,从而使其能够在较低的反应温度下表现出较强的活化分子氧的能力.此外,反应体系中引入的水分子能够与氧分子在界面活性位上共同活化,形成表面活性-OH物种,从而有效促进催化剂反应性能的提升.     

Facile preparation of Fe-Y catalyst under water-free conditions for selective catalytic reduction of NO x by ammonia

A series of Fe-Y zeolite catalysts with different Fe loading were prepared by ferrocene sublimation under solvent and water-free conditions.The dispersion,structure and morphology of the iron species on the Fe-Y catalysts were characterized by XRD,TEM and UV-Vis.The catalytic activities of Fe-Y samples were measured in selective catalytic reduction of NO with ammonia(NH3-SCR).The results showed that the iron species on the HY zeolite support were mainly made up of isolated Fe3+ions,Fex Oy oligomers and a little amount of<3 nm spherical Fe2O3particles.Isolated Fe3+ions are predominating among all the Fe-Y catalysts.The sum of isolated Fe3+ions and Fex Oy oligomers took up more than 90%percent of total iron species on the Fe-Y till 10.0 wt%loading of Fe.     

Fe3O4修饰的Pt-Ru/C纳米催化剂的制备及其在无溶剂条件下邻氯硝基苯选择性加氢的催化性能

采用浸渍法制备了一系列Pt/Ru质量比不同的Fe₃O₄修饰的Pt-Ru/Fe₃O₄/C催化剂, 运用透射电镜(TEM)、能量弥散X射线谱(EDX)、X射线光电子能谱(XPS)、X射线粉末衍射(XRD)等手段对Pt-Ru/Fe₃O₄/C一系列催化剂进行了表征, 并考察了Pt/Ru质量比不同对催化剂Pt-Ru/Fe₃O₄/C在无溶剂条件下催化邻氯硝基苯(o-CNB)选择性加氢制备邻氯苯胺(o-CAN)催化性能的影响. 研究结果表明, 催化剂的催化活性和对目标产物的选择性跟活性组分Pt、Ru比例有关. 随着Pt/Ru比例的减小, 目标产物o-CAN的选择性有所升高, 然而反应物o-CNB的转化率有所下降. 当Pt/Ru的质量比为2时, o-CNB的转化率降为76.5%, 而目标产物o-CAN的选择性仍然为100%. 与此同时, 我们还对Pt-Ru/Fe₃O₄/C催化剂高的催化活性和目标产物的高选择性可能的原因进行了分析.