Coordinating the Edge Defects of Bismuth with Sulfur for Enhanced CO2 Electroreduction to Formate

Bismuth-based materials have been recognized as promising catalysts for the electrocatalytic CO₂ reduction reaction (ECO₂RR). However, they show poor selectivity due to competing hydrogen evolution reaction (HER). In this study, we have developed an edge defect modulation strategy for Bi by coordinating the edge defects of bismuth (Bi) with sulfur, to promote ECO₂RR selectivity and inhibit the competing HER. The prepared catalysts demonstrate excellent product selectivity, with a high HCOO⁻ Faraday efficiency of ≈95 % and an HCOO⁻ partial current of ≈250 mA cm⁻² under alkaline electrolytes. Density function theory calculations reveal that sulfur tends to bind to the Bi edge defects, reducing the coordination-unsaturated Bi sites (*H adsorption sites), and regulating the charge states of neighboring Bi sites to improve *OCHO adsorption. This work deepens our understanding of ECO₂RR mechanism on bismuth-based catalysts, guiding for the design of advanced ECO₂RR catalysts.     

Comprehensive Mechanism of CO2 Electroreduction on Non-Noble Metal Single-Atom Catalysts of Mo2CS2-MXene

In this work, a series of non-noble metal single-atom catalysts of Mo₂CS₂-MXene for CO₂ reduction were systematically investigated by well-defined density-functional-theory (DFT) calculations. It is found that nine types of transitional metal (TM) supported Mo₂CS₂ (TM-Mo₂CS₂) are very stable, while eight can effectively inhibit the competitive hydrogen evolution reaction (HER). After comprehensively comparing the changes of free energy for each pathway in CO₂ reduction reaction (CO₂RR), it is found that the products of TM-Mo₂CS₂ are not completely CH₄. Furthermore, Cr-, Fe-, Co- and Ni-Mo₂CS₂ are found to render excellent CO₂RR catalytic activity, and their limiting potentials are in the range of 0.245–0.304 V. In particular, Fe-Mo₂CS₂ with a nitrogenase-like structure has the lowest limiting potential and the highest electrocatalytic activity. Ab initio molecular dynamics (AIMD) simulations have also proven that these kinds of single-atom catalysts with robust performance could exist stably at room temperature. Therefore, these single TM atoms anchored on the surface of MXenes can be profiled as a promising catalyst for the electrochemical reduction of CO₂.     

Towards the object-oriented design of active hydrogen evolution catalysts on single-atom alloys

Given a desired property, locating relevant materials is always highly desired but very challenging in a range of areas, including heterogeneous catalysis. Obviously, object-oriented design/screening is an ideal solution to this problem. Herein, we develop an inverse catalyst design workflow in Python (CATIDPy) that utilizes a genetic-algorithm-based global optimization method to guide on-the-fly density functional theory calculations, successfully realizing the highly accelerated location of active single-atom alloy (SAA) catalysts for the hydrogen evolution reaction (HER). 70 binary and 752 ternary SAA candidate catalysts are identified for the HER. Furthermore, via considering the segregation stability and cost of materials, we extracted 6 binary and 142 ternary SAA candidate catalysts that are recommended for experimental synthesis. Remarkably, guided by these theoretical identifications, homogeneously dispersed Ni-based bimetallic catalysts (e.g., NiMo, NiAl, Ni₃Al, NiGa, and NiIn) were synthesized experimentally to test the reliability of the CATIDPy workflow, and they showed superior HER performance to bare Ni foam, indicating huge potential for use in real-world water electrolysis techniques. Perhaps more importantly, these results demonstrate the capacity of such a proposed approach for investigating unexplored chemical spaces to efficiently design promising catalysts without knowledge from the expert domain, which has far-reaching implications.

An inverse catalyst design workflow in Python (CATIDPy) for discovering unexplored chemical spaces successfully realized the highly accelerated location of active single-atom alloy (SAA) catalysts for the hydrogen evolution reaction (HER).     

Pt3Co Octapods as Superior Catalysts of CO2 Hydrogenation

As the electron transfer to CO₂ is a critical step in the activation of CO₂, it is of significant importance to engineer the electronic properties of CO₂ hydrogenation catalysts to enhance their activity. Herein, we prepared Pt₃Co nanocrystals with improved catalytic performance towards CO₂ hydrogenation to methanol. Pt₃Co octapods, Pt₃Co nanocubes, Pt octapods, and Pt nanocubes were tested, and the Pt₃Co octapods achieved the best catalytic activity. Both the presence of multiple sharp tips and charge transfer between Pt and Co enabled the accumulation of negative charges on the Pt atoms in the vertices of the Pt₃Co octapods. Moreover, infrared reflection absorption spectroscopy confirmed that the high negative charge density at the Pt atoms in the vertices of the Pt₃Co octapods promotes the activation of CO₂ and accordingly enhances the catalytic activity.     

High Valence State Sites as Favorable Reductive Centers for High-Current-Density Water Splitting

Electrochemical water splitting is a promising approach for producing sustainable and clean hydrogen. Typically, high valence state sites are favorable for oxidation evolution reaction (OER), while low valence states can facilitate hydrogen evolution reaction (HER). However, here we proposed a high valence state of Co³⁺ in Ni_9.5Co_0.5−S−FeO_x hybrid as the favorable center for efficient and stable HER, while structural analogues with low chemical states showed much worse performance. As a result, the Ni_9.5Co_0.5−S−FeO_x catalyst could drive alkaline HER with an ultra-low overpotential of 22 mV for 10 mA cm⁻², and 175 mV for 1000 mA cm⁻² at the industrial temperature of 60 °C, with an excellent stability over 300 h. Moreover, this material could work for both OER and HER, with a low cell voltage being 1.730 V to achieve 1000 mA cm⁻² for overall water splitting at 60 °C. X-ray absorption spectroscopy (XAS) clearly identified the high valence Co³⁺ sites, while in situ XAS during HER and theoretical calculations revealed the favorable electron capture at Co³⁺ and suitable H adsorption/desorption energy around Co³⁺, which could accelerate the HER. The understanding of high valence states to drive reductive reactions may pave the way for the rational design of energy-related catalysts.     

The Core/Shell Structure P Doped MoS2@Ni3S2 Nanorods Array for High Current Density Hydrogen Evolution in Alkaline and Acidic Electrolyte

Electrocatalysis is the most promising strategy to generate clean energy H₂, and the development of catalysts with excellent hydrogen evolution reaction (HER) performance at high current density that can resist strong alkaline and acidic electrolyte environment is of great significance for practical industrial application. Therefore, a P doped MoS₂@Ni₃S₂ nanorods array (named P-NiMoS) was successfully synthesized through successive sulfuration and phosphorization. P-NiMoS presents a core/shell structure with a heterojunction between MoS₂ (shell) and Ni₃S₂ (core). Furthermore, the doping of P modulates the electronic structure of the P-NiMoS; the electrons transfer from the t_2g orbital of Ni element to the e_g empty orbital of Mo element through the Ni−S−Mo bond at the Ni₃S₂ and MoS₂ heterojunction, facilitating the hydrogen evolution reaction. As a result, P-NiMoS exhibits excellent HER activity; the overpotential is 290 mV at high current density of 250 mA cm⁻² in alkaline electrolyte, which is close to Pt/C (282 mV@250 mA cm⁻²), and P-NiMoS can stably evolve hydrogen for 48 h.     

DFT Comparison the Performance of Pd10Sn5 and Pd10Ag5 Electrocatalyst for Reduction of CO2

CO₂ electrocatalysis as a hydrocarbon is a promising means of achieving economical CO₂-mediated hydrogen energy cycling. Hydrocarbons are renewable hydrogen storage materials. The development of reliable metal alloy electrocatalysts is an urgent but challenging task associated with such systems, although there is still a lack of precise reaction mechanism design. In this study, the performance of Pd₁₀Ag₅ alloy nanoparticles (NPs) and Pd₁₀Sn₅ alloy nanoparticles (NPs) on the electrocatalytic reaction of CO₂ was compare. The kinetic and density functional theory (DFT) calculations show that the selectivity of the Pd-based bimetallic catalyst to the C2 product is greater than that of C1, and the stability of Pd₁₀Ag₅ is better and less affected by the reaction environment. However, the catalytic performance of the Pd₁₀Sn₅ electrocatalyst in the liquid phase is the best. The insight obtained from the calculations is used to develop criteria for identifying new and improved catalysts for electrochemical CO₂ reduction.     

Platinum Oxide Nanoparticles for Electrochemical Hydrogen Evolution: Influence of Platinum Valence State

Electrochemical hydrogen generation is a rising prospect for future renewable energy storage and conversion. Platinum remains a leading choice of catalyst, but because of its high cost and low natural abundance, it is critical to optimize its use. In the present study, platinum oxide nanoparticles of approximately 2 nm in diameter are deposited on carbon nitride (C3N4) nanosheets by thermal refluxing of C3N4 and PtCl₂ or PtCl₄ in water. These nanoparticles exhibit apparent electrocatalytic activity toward the hydrogen evolution reaction (HER) in acid. Interestingly, the HER activity increases with increasing Pt⁴⁺ concentration in the nanoparticles, and the optimized catalyst even outperforms commercial Pt/C, exhibiting an overpotential of only −7.7 mV to reach the current density of 10 mA cm⁻² and a Tafel slope of −26.3 mV dec⁻¹. The results from this study suggest that the future design of platinum oxide catalysts should strive to maximize the Pt⁴⁺ sites and minimize the formation of the less active Pt²⁺ species.     

Hierarchical β‐Mo2C Nanotubes Organized by Ultrathin Nanosheets as a Highly Efficient Electrocatalyst for Hydrogen Production

Production of hydrogen by electrochemical water splitting has been hindered by the high cost of precious metal catalysts, such as Pt, for the hydrogen evolution reaction (HER). In this work, novel hierarchical β‐Mo₂C nanotubes constructed from porous nanosheets have been fabricated and investigated as a high‐performance and low‐cost electrocatalyst for HER. An unusual template‐engaged strategy has been utilized to controllably synthesize Mo‐polydopamine nanotubes, which are further converted into hierarchical β‐Mo₂C nanotubes by direct carburization at high temperature. Benefitting from several structural advantages including ultrafine primary nanocrystallites, large exposed surface, fast charge transfer, and unique tubular structure, the as‐prepared hierarchical β‐Mo₂C nanotubes exhibit excellent electrocatalytic performance for HER with small overpotential in both acidic and basic conditions, as well as remarkable stability.     

Dirac Nodal Arc Semimetal PtSn4: An Ideal Platform for Understanding Surface Properties and Catalysis for Hydrogen Evolution

Conductivity, carrier mobility, and a suitable Gibbs free energy are important criteria that determine the performance of catalysts for a hydrogen evolution reaction (HER). However, it is a challenge to combine these factors into a single compound. Herein, we discover a superior electrocatalyst for a HER in the recently identified Dirac nodal arc semimetal PtSn₄. The determined turnover frequency (TOF) for each active site of PtSn₄ is 1.54 H₂ s^?1 at 100 mV. This sets a benchmark for HER catalysis on Pt‐based noble metals and earth‐abundant metal catalysts. We make use of the robust surface states of PtSn₄ as their electrons can be transferred to the adsorbed hydrogen atoms in the catalytic process more efficiently. In addition, PtSn₄ displays excellent chemical and electrochemical stabilities after long‐term exposure in air and long‐time HER stability tests.     

Platinum and Frustrated Lewis Pairs on Ceria as Dual-Active Sites for Efficient Reverse Water-Gas Shift Reaction at Low Temperatures

The low-temperature reverse water-gas shift (RWGS) reaction faces the following obstacles: low activity and unsatisfactory selectivity. Herein, the dual-active sites of platinum (Pt) clusters and frustrated Lewis pair (FLP) on porous CeO₂ nanorods (Pt_cluster/PN−CeO₂) provide an interface-independent pathway to boost high performance RWGS reaction at low temperatures. Mechanistic investigations illustrate that Pt clusters can effectively activate and dissociate H₂. The FLP sites, instead of the metal and support interfaces, not only enhance the strong adsorption and activation of CO₂, but also significantly weaken CO adsorption on FLP to facilitate CO release and suppress the CH₄ formation. With the help of hydrogen spillover from Pt to PN−CeO₂, the Pt_cluster/PN−CeO₂ catalysts achieved a CO yield of 29.6 %, which is very close to the thermodynamic equilibrium yield of CO (29.8 %) at 350 °C. Meanwhile, the Pt_cluster/PN−CeO₂ catalysts delivered a large turnover frequency of 8720 h⁻¹. Moreover, Pt_cluster/PN−CeO₂ operated stably and continuously for at least 840 h. This finding provides a promising path toward optimizing the RWGS reaction.     

The Functionality of Surface Hydroxy Groups on the Selectivity and Activity of Carbon Dioxide Reduction over Cuprous Oxide in Aqueous Solutions

Carbon dioxide (CO₂) reduction in aqueous solutions is an attractive strategy for carbon capture and utilization. Cuprous oxide (Cu₂O) is a promising catalyst for CO₂ reduction as it can convert CO₂ into valuable hydrocarbons and suppress the side hydrogen evolution reaction (HER). However, the nature of the active sites in Cu₂O remains under debate because of the complex surface structure of Cu₂O under reducing conditions, leading to limited guidance in designing improved Cu₂O catalysts. This paper describes the functionality of surface‐bonded hydroxy groups on partially reduced Cu₂O(111) for the CO₂ reduction reaction (CO₂RR) by combined density functional theory (DFT) calculations and experimental studies. We find that the surface hydroxy groups play a crucial role in the CO₂RR and HER, and a moderate coverage of hydroxy groups is optimal for promotion of the CO₂RR and suppression of the HER simultaneously. Electronic structure analysis indicates that the charge transfer from hydroxy groups to coordination‐unsaturated Cu (Cu_CUS) sites stabilizes surface‐adsorbed COOH*, which is a key intermediate during the CO₂RR. Moreover, the CO₂RR was evaluated over Cu₂O octahedral catalysts with {111} facets and different surface coverages of hydroxy groups, which demonstrates that Cu₂O octahedra with moderate coverage of hydroxy groups can indeed enhance the CO₂RR and suppress the HER.     

2D Catalysts for CO2 Photoreduction: Discussing Structure Efficiency Strategies and Prospects for Scaled Production Based on Current Progress

Currently, the excessive consumption of fossil fuels is accompanied by massive emissions of CO₂, leading to severe energy shortages and intensified global warming. It is of great significance to develop and use renewable clean energy while reducing the concentration of CO₂ in the atmosphere. Photocatalytic technology is a promising strategy for carbon dioxide conversion. Clearly, the achievement of the above goals largely depends on the design and construction of catalysts. This review is mainly focused on the application of 2D materials for photocatalytic CO₂ reduction. The contribution of synthetic strategies to their structure and performance is emphasized. Finally, the current challenges, and prospects of 2D materials for photoreduction of CO₂ with high efficiency, even for practical applications are discussed. It is hoped that this review can provide some guidance for the rational design, controllable synthesis of 2D materials, and their application for efficient photocatalytic CO₂ reduction.     

CO\begin{document}$ _{2} $\end{document} Reduction on Metal-Doped SnO\begin{document}$ _{2} $\end{document}(110) Surface Catalysts: Manipulating the Product by Changing the Ratio of Sn:O

The electrocatalytic carbon dioxide reduction reaction (CO₂RR) producing HCOOH and CO is one of the most promising approaches for storing renewable electricity as chemical energy in fuels. SnO₂ is a good catalyst for CO₂-to-HCOOH or CO₂-to-CO conversion, with different crystal planes participating the catalytic process. Among them, (110) surface SnO₂ is very stable and easy to synthesisze. By changing the ratio of Sn: O for SnO₂(110), we have two typical SnO₂ thin films: fully oxidized (stoichiometric) and partially reduced. In this work, we are concerned with different metals (Fe, Co, Ni, Cu, Ru, Rh, Pd, Ag, Os, Ir, Pt, and Au)-doped SnO₂(110) with different activity and selectivity for CO₂RR. All these changes are manipulated by adjusting the ratio of Sn: O in (110) surface. The results show that stochiometric and reduced Cu/Ag doped SnO₂(110) have different selectivity for CO₂RR. More specifically, stochiometric Cu/Ag-doped SnO₂(110) tends to generate CO(g). Meanwhile, the reduced surface tends to generate HCOOH(g). Moreover, we also considered the competitive hydrogen evolution reaction (HER). The catalysts SnO₂(110) doped by Ru, Rh, Pd, Os, Ir, and Pt have high activity for HER, and others are good catalysts for CO₂RR.     

Cu/CdCO3 catalysts for efficient electrochemical CO2 reduction over the wide potential window

High efficiency and low-cost catalyst-driven electrocatalytic CO₂ reduction to CO production are of great significance for energy storage and development. The severe competitive hydrogen evolution reaction occurs at large negative potential window limits the achievement of the target product from CO₂ at high efficiency. Here, we successfully prepared Cu_x/CdCO₃ composite catalyst rich in interfaces, in which achieved high CO Faraday efficiency exceeded 90% in a wide potential window of 700 mV and highest value up to 97.9% at −0.90 V vs. RHE. The excellent performance can be ascribed to the positive contribution of Cu_x/CdCO₃, which maintains a suitable high local pH value during electrochemical reduction, thus inhibiting the competitive hydrogen evolution reaction. Moreover, the compact structure between Cu and CdCO₃ ensures fast electron transfer both inside catalysts and interface, thus speeding up the reaction kinetics of CO₂ to CO conversion. Theoretically calculations further prove that the combination of Cu and CdCO₃ provides the well-defined electronic structure for intermediates adsorption, significantly reducing the reaction barrier for the formation of CO. This work provides new insights into the design of efficient electrochemical CO₂ reduction catalysts for inhibiting hydrogen evolution by adjusting the local pH effect.     

Heterointerface engineering of Ru/RuS2 on N/S-doped hollow mesoporous carbon for promoting alkaline hydrogen evolution

Alkaline hydrogen evolution reaction (HER) suffers from a sluggish kinetic, which requires the elaborate catalytic interface and micro-nanoscale architecture engineering of the electrocatalysts to accelerate the water dissociation and hydrogen evolution. Herein, the heterointerface engineering was proposed for promoting the alkaline HER by constructing the highly exposed Ru/RuS₂ heterostructures homogeneously distributed on hollow N/S-doped carbon microspheres (Ru/RuS₂@h-NSC). Benefited from the synergistic effect of heterointerfacial Ru/RuS₂, the high accessibility of the active sites on both inner and outer surface of mesoporous shells and the efficient mass transport, Ru/RuS₂@h-NSC affords a remarkable catalytic performance with an overpotential of 26 mV@10 mA/cm² for alkaline HER, outperforming most of the state-of-the-art catalysts. Further applying Ru/RuS₂@h-NSC and its oxidized derivate for the overall alkaline water splitting, the required cell voltage is much lower than that of the commercial Pt/C||RuO₂ pair to achieve the same current density. Our study may allow us to guide the design of micro-nanoreactors with optimal catalytic interfaces for promising electrocatalytic applications.     

Facile and Large-Scale Fabrication of Sub-3 nm PtNi Nanoparticles Supported on Porous Carbon Sheet: A Bifunctional Material for the Hydrogen Evolution Reaction and Hydrogenation

Facile and large-scale preparation of materials with uniform distributions of ultrafine particles for catalysis is a challenging task, and it is even more difficult to obtain catalysts that excel in both the hydrogen evolution reaction (HER) and hydrogenation, which are the corresponding merging and splitting procedures of hydrogen, respectively. Herein, the fabrication of ultrafine bimetallic PtNi nanoparticles embedded in carbon nanosheets (CNS) by means of in situ self-polymerization and annealing is reported. This bifunctional catalyst shows excellent performance in the hydrogen evolution reaction (HER) and the hydrogenation of p-nitrophenol. Remarkably PtNi bimetallic catalyst with low metal loading (PtNi₂@CNS-600, 0.074 wt % Pt) exhibited outstanding HER activity with an overpotential as low as 68 mV at a current density of 10 mA cm⁻² with a platinum loading of only 0.612 μg_Pt cm⁻² and Tafel slope of 35.27 mV dec⁻¹ in a 0.5 m aqueous solution of H₂SO₄, which is comparable to that of the 20 % Pt/C catalyst (31 mV dec⁻¹). Moreover, it also shows superior long-term electrochemical durability for at least 30 h with negligible degradation compared with 20 % Pt/C. In addition, the material with increased loading (mPtNi₂@CNS-600, 2.88 % Pt) showed robust catalytic activity for hydrogenation of p-nitrophenol at ambient pressure and temperature. The catalytic activity towards hydrogen splitting is a circumstantial evidence that agrees with the Volmer–Tafel reaction path in the HER.     

Properties of Bulk In-Pt Intermetallic Compounds in Methanol Steam Reforming

Heterogeneous catalysts are often complex materials containing different compounds. While this can lead to highly beneficial interfaces, it is difficult to identify the role of single components. In methanol steam reforming (MSR), the interplay between intermetallic compounds, supporting oxides and redox reactions leads to highly active and CO₂-selective materials. Herein, the intrinsic catalytic properties of unsupported In₃Pt₂, In₂Pt, and In₇Pt₃ as model systems for Pt/In₂O₃-based catalytic materials in MSR are addressed. In₂Pt was identified as the essential compound responsible for the reported excellent CO₂-selectivity of 99.5 % at 300 °C in supported systems, showing a CO₂-selectivity above 99 % even at 400 °C. Additionally, the partial oxidation of In₇Pt₃ revealed that too much In₂O₃ is detrimental for the catalytic properties. The study highlights the crucial role of intermetallic In−Pt compounds in Pt/In₂O₃ materials with excellent CO₂-selectivity.     

Optimization of the Hydrogen-Adsorption Free Energy of Ru-Based Catalysts towards High-Efficiency Hydrogen Evolution Reaction at all pH

The utilization of noble-metal catalysts for the hydrogen evolution reaction (HER) provides an efficient strategy for hydrogen acquisition. However, exploring catalysts with suitable hydrogen binding strength for the HER process is always of great importance, but extremely challenging. In this work, sulfur and phosphor as electron-withdrawing elements were incorporated into carbon nanotube (CNT)-supported Ru catalysts, which were prepared through a facile solution reduction reaction and post thermo treatment. Owing to the suitable electronegativity provided by P and synergistic effects of the carbon nanotubes, the RuP₂/CNT achieved a high catalytic performance as a HER electrocatalyst. This may result from the modulation effect of the electronic properties and the depressed adsorption free energy of RuP₂. Electrochemical tests present that the RuP₂/CNT composite exhibit a small overpotential of 58 mV at 10 mA cm⁻² in acidic electrolyte. In a neutral or alkaline environment, the overpotential is 82 and 40 mV, respectively. The RuP₂/CNT electrode also possesses stable durability for long-time cycling, suggesting its remarkable property as promising all-pH HER catalyst.     

Size-Dependent Nickel-Based Electrocatalysts for Selective CO2 Reduction

Closing the anthropogenic carbon cycle by converting CO₂ into reusable chemicals is an attractive solution to mitigate rising concentrations of CO₂ in the atmosphere. Herein, we prepared Ni metal catalysts ranging in size from single atoms to over 100 nm and distributed them across N-doped carbon substrates which were obtained from converted zeolitic imidazolate frameworks (ZIF). The results show variance in CO₂ reduction performance with variance in Ni metal size. Ni single atoms demonstrate a superior Faradaic efficiency (FE) for CO selectivity (ca. 97 % at −0.8 V vs. RHE), while results for 4.1 nm Ni nanoparticles are slightly lower (ca. 93 %). Further increase the Ni particle size to 37.2 nm allows the H₂ evolution reaction (HER) to compete with the CO₂ reduction reaction (CO₂RR). The FE towards CO production decreases to under 30 % and HER efficiency increase to over 70 %. These results show a size-dependent CO₂ reduction for various sizes of Ni metal catalysts.