Design of a fluidized bed reactor for microencapsulated urease

A fluidized bed reactor was designed, constructed, and tested for handling microencapsulated urease. The working volume of the reactor was 10 mL, with a minimum fluidization velocity of 7.7×10⁻⁵ m/s. An even suspension of the microcapsules was obtained at fluid velocities between 1.5×10⁻⁴ and 6.0×10⁻⁴ m/s without breakage of the shear-sensitive microcapsules. The mixing behavior in the reactor was evaluated using pulse input tracer experiments and the hydrolysis rates of urea in continuous flow experiments were evaluated under various operating conditions.     

Solvent effects on the absorption spectrum of the perylene-SbCl<Subscript>5</Subscript> complex

The perylene-SbCl₅ complex is characterized by two absorption maxima, whose positions depend on the nature of the solvent. The maximum in the region of 19×10⁻³ cm⁻¹ corresponds to the perylene cationic form and depends on the medium polarity, while another, in the region of 14×10⁻³ cm⁻¹, corresponding to the perylene-SbCl₅ complex, is governed primarily by the ability of the solvent to the electrophilic solvation. However, the quantitative generalization of the data on the frequencies of absorption maxima is only possible using multiparameter equations that take into account various properties of the solvents.     

Diffusion in polymers dependence on crosslink density

Kinetics of N-methyl pyrrolidone evaporation from swollen photo-crosslinked polyacrylate was monitored thermogravimetrically at temperatures ranging from 323 to 398 K. Crosslink density dependence of evaporation kinetics was investigated in photo-crosslinked polyacrylates with crosslinked density ranging from ≈1.2 × 10² to ≈1.7 × 10⁴ mol m⁻³ and number of main chain atoms between crosslinks ranging from ≈70 atoms to ≈6 atoms, respectively. As was shown, evaporation kinetics was controlled by the solvent diffusion in polymer. Activation energies of evaporation (diffusion) were deduced from the rate measurements at different temperatures. Apparent activation energy of evaporation decreased from 48.7 to 31.1 kJ mol⁻¹ with crosslink density increase. Activation energy of pure N-methyl pyrrolidone evaporation was 50.6 kJ mol⁻¹. Decrease of the rate of solvent diffusion and unexpected decrease of diffusion activation energy with increase of crosslink density of swollen polymer matrix was explained by decrease in polymer chain segments mobility, as indicated by Eyring’s approach to diffusion in polymers.     

Utilization of solid phase spectrophotometry for the determination of trace amounts of copper using 5-(2-benzothiazolylazo)-8-hydroxyquinoline

A simple, selective, highly sensitive and accurate procedure for the determination of trace amounts of copper has been developed based on solid-phase spectrophotometry. Copper reacts with 5-(2-benzothiazolylazo)-8-hydroxyquinoline (BTAHQ) to give a complex with high molar absorptivity (3.17 × 10⁷ L mol⁻¹ cm⁻¹, 3.07 × 10⁸ L mol⁻¹ cm⁻¹, 1.22 × 10⁹ L mol⁻¹ cm⁻¹, and 1.80 × 10⁹ L mol⁻¹ cm⁻¹), fixed on a Dowex 1-X8 type anion-exchange resin for 10 mL, 100 mL, 500 mL, and 1000 mL, respectively. The absorbance at 667 nm and 800 nm packed in a 1.0 mm cell was measured directly. Calibration is linear over the range 0.2–3.7 μg L⁻¹ with RSD of < 1.28 % (n = 10). The detection and quantification limits of the 500 mL sample method are 79 ng L⁻¹ and 260 ng L⁻¹ when using 60 mg of Dowex 1-X8. For a 1000 mL sample, the detection and quantification limits are 67 ng L⁻¹ and 220 ng L⁻¹ using 60 mg of the exchanger. Increasing the sample volume can enhance the sensitivity. The proposed method was applied to the determination of copper in different environmental water samples (tap, pit, spring, and river), food products (rice, corn flour, and tea), and mushrooms, using the standard addition technique.     

Selective Indicator Reaction for Kinetic Determination of Traces of Manganese(II), Ribavirin and Tiazofurin

 In this work it was established that, in the presence of ammonium carbonate, traces of manganese(II) catalyse the oxidation of Nile Blue A by hydrogen peroxide, which enables its kinetic determination in the concentration range from 6.6 to 65.9 ng cm⁻³, the detection limit being 8.0 × 10⁻² ng cm⁻³. Antiviral/antitumour substances modify the catalytic activity of manganese(II): 1-β-D-ribofuranosyl-1,2,4-triazole-3-carboxamide, ribavirin, increases the catalytic effect of manganese(II), while 2-β-D-ribofuranosyl-thiazole-4-carboxamide, tiazofurin, acts as an inhibitor. On the basis of these effects, a kinetic method for determining ribavirin concentrations from 0.5 × 10⁻¹ to 4.0 × 10⁻¹ μg cm⁻³ and tiazofurin concentrations from 0.3 to 2.6 μg cm⁻³ is proposed. The kinetics of the indicator reaction were studied in the presence of the substances examined, the kinetic equations established, and the constants of the corresponding reaction rates calculated. The effect of temperature on these reactions was also investigated. The method was applied to the determination of manganese(II) in mineral water and ribavirin in pharmaceutical preparations. Received December 16, 1999. Revision June 6, 2000.     

Simultaneous determination of silicic acid, Ca, Mg and Al in mineral water and composite tablets by Ion chromatography

Summary A simple, selective and sensitive ion-chromatography method was investigated for simultaneously determining silicic acid, Ca²⁺, Mg²⁺, Al³⁺ and anions (Cl⁻ and NO ₃ ⁻ ) in real samples. It involved a single-column ion-chromatograph with sodium hydroxide-methanol-water eluent and conductometric detection. Cations were converted to complex anions by adding EDTA to the sample solution. A set of well-defined peaks of silicic acid, Ca²⁺, Mg²⁺, Al³⁺, Cl⁻ and NO ₃ ⁻ were obtained. Detection limits using 3.3σ (σ=standard deviation of blank solution) were 1.25×10⁻⁶ M for H₃SiO ₄ ⁻ , 1.32×10⁻⁶ M for Ca²⁺, 1.28×10⁻⁶ M for Mg²⁺, 1.33×10⁻⁶ M for Al³⁺, 1.31×10⁻⁶ M for Cl⁻ and 1.24×10⁻⁶ M for NO ₃ ⁻ . The method was successfully applied to analysis of mineral water and composite tablets.     

Microencapsulated Engineered <Emphasis Type="Italic">Lactococcus lactis Cells</Emphasis> for Heterologous Protein Delivery: Preparation and In Vitro Analysis

This article demonstrates the potential of encapsulated, engineered Lactococcus lactis as a vehicle for the oral delivery of therapeutic proteins. Using alginate-poly-l-lysine-alginate membrane-encapsulated L. lactis engineered to secrete the reporter protein Staphylococcal aureus nuclease, we show comparable viability and protein secretion between free and immobilized cells. After 12 h, microcapsules with a cell density of 4.8 × 10⁵ colony forming unit (CFU) ml⁻¹ grew to 2.2 × 10⁸ CFU ml⁻¹ and released 0.24 arbitrary unit (AU) ml⁻¹ of nuclease, producing similar results as free cells, which grew from 3.4 × 10⁵ to 1.9 × 10⁸ CFU ml⁻¹ and secreted 0.21 AU ml⁻¹ of nuclease. Moreover, encapsulated cells at a density of 4.4 × 10⁷ CFU ml⁻¹ grew to 2.2 × 10¹⁰ CFU ml⁻¹ in 12 h and secreted 15.3 AU ml⁻¹ of nuclease although 3.1 × 10⁷ CFU ml⁻¹ of free cells reached only 2.3 × 10⁹ CFU ml⁻¹ and released 5.6 AU ml⁻¹ of nuclease. We also show the sustained stability of the microcapsules during storage at 4°C over 8 weeks.     

Improvement of an old spectrophotometric method for the microdetermination of ascorbic acid by the use of a micellar medium

₃]²⁺. Whereas the initial method is carried out in an aqueous solution, the improved one employs an aqueous micellar medium formed by the cationic surfactant cetylpyridinium bromide (CPBR). The λmax in both methods is the same, i.e. 510 nm. The mean apparent molar absorptivity (ɛ) and Sandell’s sensitivity (Ss) were calculated as ɛ=2.10×10⁴ Lmol^-1 cm^-1 and Ss=8.37 ng cm^-2 for the initial procedure, and ɛ=2.62×10⁴ Lmol^-1 cm^-1 and Ss=6.72 ng cm^-2 for the improved one. The regression line equation for the improved method was: A=1.487×10^-1C −1.415×10^-2 (r=0.9998). The accuracy and the precision of the improved method were investigated and the conclusions were satisfactory. The results obtained for ASCA by both the described method and an official one, were statistically compared by means of the Student’s t-test and by the variance ratio F-test; and no significant difference was observed. Received: 15 January 1996/Revised: 7 March 1996/Accepted: 13 March 1996     

Binary mutual diffusion coefficients of aqueous ammonium and potassium sulfates at 25°C

The diffusion coefficients of aqueous ammonium and potassium ions at infinite dilution differ by only 0.01% at 25°C, so, according to Nernst's law, the binary mutual diffusion coefficients D of pairs of dilute aqueous ammonium and potassium salts should be nearly identical. Yet precise optical interferometric data for ammonium and potassium sulfates contradict this rule: the value of D reported previously for 0.05 mol-L⁻¹ aqueous ammonium sulfate is 0.80×10⁻⁵ cm²-s⁻¹, while the corresponding value for potassium sulfate is 1.24×10⁻⁵ cm²-s⁻¹ about 50% higher. To confirm this surprising result, the diffusion coefficients of the two salts have been measured by the Taylor dispersion technique. The diffusion coefficients of the salts are indeed nearly identical, and the earlier ammonium sulfate data are found to be incorrect.     

Fluorimetric determination of traces of europium(III) using a new chelator and acetate or phosphate in dimethylsulfoxide as enhancers

A new Schiff-base ligand [N, N′, N″-Tri- (2,4-dihydroxyacetophenone) – triaminotriethylamine (TDATA)] with a tripodal structure was synthesized. Its fluorescence intensity with the europium(III) complex was increased about 178-fold in the presence of sodium acetate (NaAc) and about 126-fold in the presence of sodium phosphate (Na₃PO₄) solution. After adding the organic solvent dimethylsulfoxide (DMSO) to the above system, which leads to Eu³⁺ the fluorescence was further enhanced about 12-fold. Spectrofluorimetric determination of trace amounts of Eu³⁺ based on the phenomenon was performed. The excitation and emission wavelength is 365 nm and 615 nm, respectively. Under optimum conditions, the fluorescence intensities vary linearly with the concentration of Eu³⁺ in the range of 4.9 × 10⁻¹²–3.2 × 10⁻⁶ mol · L⁻¹ with a detection limit of 4.5 × 10⁻¹² mol · L⁻¹ (for the TDATA-NaAc-DMSO system) or 6.2 × 10⁻¹¹–8.6 × 10⁻⁶ mol · L⁻¹ with a detection limit of 6.0 × 10⁻¹¹ mol · L⁻¹ (for the TDATA-Na₃PO₄-DMSO system). Interferences of some rare earth metals and other inorganic ions are described. The method is a selective, sensitive, rapid and simple analytical procedure for the determination of europium(III) in a high purity yttrium oxide and synthetic sample. The mechanism for the fluorescence enhancement is also discussed.     

Covalent Modification of Glassy Carbon Electrode with L-Cysteine for the Determination of Acetaminophen

A novel L-cysteine film modified electrode has been fabricated by means of an electrochemical oxidation procedure, and it was successfully applied to the electrochemical determination of acetaminophen. This method utilizes the electrooxidation of amines to their analogous cation radicals to form a chemically stable covalent linkage between the nitrogen atom of the amine and edge plane sites at the glassy carbon electrode surface. The electrochemical behaviour of acetaminophen at the film electrode was investigated in 0.1 mol L⁻¹ phosphate buffer (pH 6.20). It was found that the redox peak current of acetaminophen was enhanced greatly on the film electrode. Linearity between the oxidation peak current and the acetaminophen concentration was obtained in the range of 1.0 × 10⁻⁴–2.0 × 10⁻⁷ mol L⁻¹ with a detection limit of 5.0 × 10⁻⁸ mol L⁻¹. For seven parallel detections of 1.0 × 10⁻⁵ mol L⁻¹ acetaminophen, the relative standard deviation (RSD) was 1.46%, suggesting that the film electrode has excellent reproducibility. Application to the determination of acetaminophen in drug tablets and human urine demonstrated that the film electrode has good stability and high sensitivity.     

Kinetic, spectral and redox properties of the transients formed on one-electron reduction of 3, 3, 6, 6-tetramethyl-3, 4, 6, 7, 9-pentahydro-10-phenyl (1, 8) (2H, 5H) acridinedione in aqueous-organic mixed solvent system: A pulse radiolysis study

The phenyl substituted acridine-1,8-dione (AD) dye reacts with (CH₃)₂*COH radicals with a bimolecular rate constant of 0.6 × 10⁸ dm³ mol⁻¹ s⁻¹ in acidic aqueous-organic mixed solvent system. The transient optical absorption band (λ_max = 465 nm, ɛ = 6.8 × 10² dm³ mol⁻¹ cm⁻¹) is assigned to ADH* formed on protonation of the radical anion. In basic solutions, (CH₃)₂*COH radicals react with a bimolecular rate constant of 4.6 × 10⁸ dm³ mol⁻¹ s⁻¹ and the transient optical absorption band (λ_max = 490 nm, ɛ = 10.4 × 10³ dm³ mol⁻¹ cm⁻¹) is assigned to radical anion, AD*⁻, which has a pK_a value of 8.0. The reduction potential value of the AD/AD*⁻ couple is estimated to be between −0.99 and −1.15 V vs NHE by pulse radiolysis studies. The cyclic voltammetric studies showed the peak potential close to −1.2 V vs Ag/AgCl.     

Kinetic Determination of Nanogram Levels of Manganese(II) by Naphthol Blue Black–Potassium Periodate–1,10-Phenanthroline System

 The catalytic effect of manganese(II) on the oxidation of Naphthol Blue Black, with potassium periodate in the presence of 1,10-phenanthroline in weakly acidic media is studied. The reaction is followed spectrophotometrically by measuring the decrease in the absorbance of the dye at 618 nm. Under the optimum conditions (3 × 10⁻⁵ mol dm⁻³ Naphthol Blue Black, 6 × 10⁻⁴ mol dm⁻³ potassium periodate, 1 × 10⁻⁴ mol dm⁻³ 1,10-phenanthroline, 0.1 mol dm⁻³ acetate buffer – pH 4.0, 60 °C, 5 min) manganese(II) in the range 0.08–4 ng cm⁻³ can be determined by the fixed-time method with a detection limit of 0.025 ng cm⁻³. The influence of foreign ions on the accuracy of the results is investigated. The developed method is highly sensitive, selective, and simple. The method was applied successfully to the determination of manganese in cucumbers, garlic cloves and parsley leaves. Received June 12, 2000. Revision December 12, 2000.     

Preconcentration and Voltammetric Determination of the Antihypertensive Doxazosin on a C8 Modified Carbon Paste Electrode

 An electrochemical study of the doxazosin oxidative process at carbon paste electrodes using different voltammetric techniques has been carried out. The process is irreversible and controlled by adsorption, giving rise to an oxidation wave around 1.0 V in citric acid-citrate buffer (pH 3.0). A mechanism based on the oxidation of the amine group is postulated. Two methods based on adsorptive stripping (AdS) of doxazosin at the C₈-modified carbon paste electrode (C₈-MCPE), before its voltammetric determination, are studied, using differential pulse voltammetry (DPV) and square wave voltammetry (SWV) as redissolution techniques. By means of AdS-DPV and C₈-MCPE, doxazosin can be determined over the 1.0 × 10⁻⁹ to 3.0 × 10⁻⁸ mol L⁻¹ range with a variation coefficient of 2.2% (2.0 × 10⁻⁸ mol L⁻¹) and a limit of detection of 7.4 ×10⁻¹⁰ mol L⁻¹. If AdS-SWV is used, a linear range from 1.0 × 10⁻⁹ to 4.0 × 10⁻⁸ mol L⁻¹ is obtained, the variation coefficient being 2.8% (2.0 × 10⁻⁸ mol L⁻¹, and the limit of detection reached 7.7 × 10⁻¹⁰ mol L⁻¹. The AdS-DPV procedure was applied to the determination of doxazosin in urine and formulations. Received March 13, 1999. Revision December 23, 1999.     

<Emphasis Type="Italic">S,S,S</Emphasis>-Tris(2-ethylhexyl) phosphorotrithioate as an effective solvent mediator for a mexiletine-sensitive membrane electrode

S,S,S-Tris(2-ethylhexyl) phosphorotrithioate proved to be an effective solvent mediator for constructing a mexiletine-sensitive membrane electrode in combination with an ion-exchanger, sodium tetrakis[3,5-bis(2-methoxyhexafluoro-2-propyl)phenyl]borate. Among a series of phosphorus compounds containing phosphoryl (P=O) groups, this solvent mediator showed the highest sensitivity to mexiletine in phosphate-buffered physiological saline containing 0.15 mol L⁻¹ NaCl and 0.01 mol L⁻¹ NaH₂PO₄/Na₂HPO₄ (pH 7.4), giving a detection limit of 2 × 10⁻⁶ mol L⁻¹ with a slope of 58.8 mV decade⁻¹. This is the best reported detection limit of any mexiletine-sensitive electrode developed to date. Owing to its high selectivity toward inorganic cations, the electrode was used to determine the level of mexiletine in saliva, the monitoring of which is quite effective for controlling the dose of this drug noninvasively. The mexiletine concentrations determined with the mexiletine-sensitive electrode compared favorably with those determined by high-performance liquid chromatography.     

Determination of chromium in blood by neutron activation analysis

A procedure for the determination of chromium in blood has been developed with a sensitivity of 5×10⁻³ μg Cr. Dried blood was irradiated with a neutron flux of 10¹² n·cm⁻²·sec⁻¹ in the VVRS reactor for 4 weeks, then the sample was mineralized and the chromium isolated by extraction as perchromic acid. The determination of the chromium content was accomplished by measuring the 0.32 MeV gamma energy of⁵¹Cr. In order to make correction for the interfering reaction⁵⁴Fe(n,α)⁵¹Cr, the formation of chromium from high-purity iron was investigated. The chromium content of the blood samples was between 1.03×10⁻² and 5.2×10⁻² ppm Cr.     

Electrochemical behavior and determination of epinephrine at a mercaptoacetic acid self-assembled gold electrode

The electrochemical behavior of epinephrine (EP) at a mercaptoacetic acid (MAA) self-assembled monolayer modified gold electrode was studied. The MAA/Au electrode is demonstrated to promote the electrochemical response of epinephrine by cyclic voltammetry. The possible reaction mechanism is also discussed. The diffusion coefficient D of EP is 6.85 × 10⁻⁶ cm² s⁻¹. In 0.1 mol L⁻¹ phosphate buffer (pH 7.20), a sensitive oxidation peak was observed at 0.177 V, and the peak current is proportional to the concentration of EP in the range of 1.0 × 10⁻⁵–2.0 × 10⁻⁴ mol L⁻¹ and 1.0 × 10⁻⁷–1.0 × 10⁻⁶ mol L⁻¹. The detection limit is 5 × 10⁻⁸ mol L⁻¹. The modified electrode is highly stable and can be applied to the determination of EP in practical injection samples. The method is simple, quick, sensitive and accurate.     

Determination of Zirconium (IV) and Aluminium (III) in Waste Water

 Zirconium (IV) was determined spectrophotometrically by reaction with quercetin as primary ligand and oxalate as secondary ligand. Polyvinylpyrrolidone (PVP) was used as protective colloid to solubilize the formed zirconium quercetin oxalate ternary complex. The molar absorptivity of the 1:3:1 (zirconium–quercetin–oxalate) complex is 7.31 × 10⁴ L·mol⁻¹ cm⁻¹ at 430 nm with a stability constant of 8.2 × 10²⁰ and its detection limit is 0.16 mg/L. Beer’s law is rectilinear up to 1.46 mg/L of zirconium (IV). The sensitivity index is 1.25 ng cm⁻². The reaction of aluminium (III) with quercetin in presence of PVP as a surfactant has been studied spectrophotometrically. The molar absorptivity of the 1:3 (aluminium–quercetin) complex is 8.09 × 10⁴ × L·mol⁻¹·cm⁻¹ at 433 nm, its stability constant is 2.6 × 10¹³ with sensitivity index of 0.33 ng·cm⁻² and its detection limit is 0.08 mg/L. The optimal conditions for the quantitative determination of zirconium and aluminium were studied. The proposed methods are examined by statistical analysis of the experimental data. The methods are free from interference of most cations and anions. The proposed methods have been used to determine zirconium and aluminium in industrial waste water. Received May 30, 2001; accepted November 2, 2001; published online July 15, 2002     

Voltammetric investigation and amperometric detection of the bisphosphonate drug sodium alendronate using a copper nanoparticles-modified electrode

The electrochemical behavior of sodium alendronate on copper microparticle- and copper nanoparticle-modified carbon paste electrodes was investigated. In the voltammograms recorded using microparticles, a single anodic oxidation peak appeared, while using nanoparticles, two anodic peaks appeared. The anodic currents were related to the electrocatalytic oxidation of alendronate via the active species of Cu(III). The catalytic rate constant for the electrocatalytic oxidation process and the diffusion coefficient of alendronate were obtained to be 1.57 × 10³ cm³ mol⁻¹ s⁻¹ and 2.44 × 10⁻⁶ cm² s⁻¹, respectively. A sensitive and time-saving detection procedure was developed for the analysis of alendronate, and the corresponding analytical parameters were reported. Alendronate was determined with a limit of detection of 11.26 μmol L⁻¹ with a linear range of 50–6,330 μmol L⁻¹. The proposed amperometric method was applied to the analysis of commercial pharmaceutical tablets, and the results were in good agreement with the declared values.     

Volumetric Properties of Dilute Solutions of Water in Acetone between 288.15 and 318.15 K

Densities of dilute solutions of water in acetone, with solute mole fractions ranging up to 0.03, have been measured with an error of 8 ×10⁻⁶ g⋅cm⁻³, at 288.15, 298.15, 308.15 and 318.15 K, using a precision vibrating-tube densimeter. The partial molar volumes of the solute water (down to infinite dilution) and solvent acetone, as well as the excess molar volumes of the specified mixtures, have been calculated. The effects of the solute concentration and temperature on the volume packing changes, caused by solvation of water in acetone, have been considered.